aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
...
* firmware-utils: tplink-safeloader: add dynamic partitionsAlex Maclean2018-06-261-13/+58
| | | | | | | | | | | | | | | | | Add support to dynamically split the firmware partition into os-image and file-system partitions. This is done by replacing those entries in the partition table with a single unified firmware partition, which is then split according to actual kernel image size. The factory image will have the file-system partition aligned to a 64K erase block, but the sysupgrade image skips this and aligns only the JFFS2 EOF marker to squeeze out more space. This should prevent further creeping updates to the kernel partition size while maximizing space for the overlay filesystem on smaller devices. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* firmware-utils: mktplinkfw: add rootfs offset for combined imagesAlex Maclean2018-06-261-1/+10
| | | | | | | | | | | Add an option (-O) to calculate rootfs offset for combined images. This is needed for the TP-Link mtdsplit driver to locate the rootfs when the start is not aligned to an erase block. This will be the case for sysupgrade images produced by tplink-safeloader with upcoming dynamic partition splitting. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ar71xx: Add support for TP-Link CPE210 v2Adrian Schmutzler2018-06-231-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: add support for TP-LINK Archer C7 v5Arvid E. Picciani2018-06-201-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org>
* b43-tools: update to latest git HEADKrystian Kozak2018-06-181-3/+3
| | | | | | | | | | | 122ca37 Rename bits in hostflags to match new identifiers for the hostflags 32c2a3c Change order of identifiers to be ascending with the spr numbers f7016b5 Remove definitions which are not Broadcom specific b77c0a3 debug: Fix ordering of HF bits 3f46e61 fwcutter: Add firmware 9.10.178.27 27892ef fwcutter/make: Avoid _DEFAULT_SOURCE warning Signed-off-by: Krystian Kozak <krystian.kozak20@gmail.com>
* ath79: add tl-wr1043nd-v4 support everything is workingLucian Cristian2018-06-181-2/+2
| | | | | | | tplink-safeloader: resize kernel partition kernel 4.14 is much bigger, resize the partition Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* tools: build squashfs (v3) for ath79Zoltan HERPAI2018-06-161-1/+2
| | | | | | | | | | | | | Certain Netgear and AVM devices use BE squashfs for the kernel image. As squashfs4 only supports creating LE images, add squashfs (v3) into the tools to be built for ath79. Trying to use an LE squashfs (thus trying to use squashfs4 only for building the image) for the kernel image results in the bootloader barfing and stopping. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* tools/bison: Update to 3.0.5Daniel Engberg2018-06-133-32/+10
| | | | | | | | Update bison to 3.0.5 Bugfix release Remove 001-fix-macos-vasnprintf.patch as it is fixed upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/e2fsprogs: Update to 1.44.2Daniel Engberg2018-06-131-2/+2
| | | | | | Update e2fsprogs to 1.44.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* sparse: updated to version 0.5.2Krystian Kozak2018-06-081-5/+6
| | | | | | Updated to latest stable release Signed-off-by: Krystian Kozak <krystian.kozak20@gmail.com>
* imx-uuc: updated to latest git HEADKrystian Kozak2018-06-081-3/+3
| | | | | | | | | | 8e29d86 linuxrc: remove superfluous shebang line 12d2045 gitignore: remove Windows stuff 57d8969 Add travis hint 8edf4cc sdimage: use fsync before closing the device (fixes #1) d395b31 uuc: fix some compiler warnings Signed-off-by: Krystian Kozak <krystian.kozak20@gmail.com>
* tools: zlib: do not hardcode the install prefix in zlib.pcJo-Philipp Wich2018-05-241-0/+14
| | | | | | | | | | | | | | | | | Our pkg-config wrapper relies on the ability to redefine the $prefix and $exec_prefix variables in order to construct proper search paths relative to the build environment. Patch the .pc file template to construct libdir, sharedlibdir and includedir relative to the ${prefix} variable so that it can be overridden as needed. This also fixes the libxml2/host build issue raised at https://github.com/openwrt/packages/issues/6073 - it was caused by libxml2's configure picking up a wrong host search path through zlib.pc, letting it include the wrong endian.h, causing spurious member redeclaration errors in system headers. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: increase kernel partition size for the TP-Link Archer C2600Stefan Lippers-Hollmann2018-05-221-2/+7
| | | | | | | | | | | | | | | | | | The default image does not fit 2 MB anymore, expand os-image partition to 4 MB. Upgrading works transparently via sysupgrade in both directions. Another option would have been to merge "os-image" and "rootfs" into a single "firmware" partition using MTD_SPLIT_TPLINK_FW, but just changing the sizes of the existing partitioning has been deemed safer and actually tested on an affected device; the maximum for rootfs changes from 27 MB to 25 MB. Run-tested on TP-Link Archer C2600. Signed-off-by: Joris de Vries <joris@apptrician.nl> [slh: extend comments and commit message, rename rootfs] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* tools/cmake: Update to 3.11.1Daniel Engberg2018-05-051-2/+2
| | | | | | Update cmake to 3.11.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/xz: Update to 5.2.4Daniel Engberg2018-05-051-10/+3
| | | | | | | | Update to 5.2.4 Remove FreeBSD fix as it's not needed Disable docs Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mm-macros: Update to 0.9.12Daniel Engberg2018-05-051-2/+2
| | | | | | Update mm-macros to 0.9.12 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/sed: Update to 4.5Daniel Engberg2018-05-051-2/+2
| | | | | | Update sed to 4.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: add DNS-313 image header toolLinus Walleij2018-05-052-0/+240
| | | | | | | | This tool is used to create headers on images for the D-Link DNS-313 in gemini target. Will be used after switching gemini to 4.14 kernel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mtd-utils: add back macOS compatibility code that was dropped during the updateFelix Fietkau2018-04-301-0/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/make-ext4fs: Fix build on MacOSXHauke Mehrtens2018-04-291-2/+0
| | | | | | | | | | | MacOSX does not support "-Wl,-Bstatic" so do not force the static linking. We only copy the static libz library into the staging libraries directories, the linker will anyway only find the static version and link against that on all systems. Fixes: 8dcd941d8b9 ("tools/zlib: move zlib build to tools") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/libressl: update to version 2.7.2Hauke Mehrtens2018-04-284-3/+112
| | | | | | | Libressl version 2.7.0 and later implement more of the OpenSSL 1.1 API and this needs some modifications of the code using it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/mtd-utils: update to version 2.0.2Hauke Mehrtens2018-04-2811-303/+101
| | | | | | | | This version now uses autotools to configure the build system. They are also using the newly added zlib package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/mtd-utils: Mark some lzma functions as staticHauke Mehrtens2018-04-281-37/+37
| | | | | | | | | | | | | | | These functions are not declared in any header file and only used in same compile unit, mark them as static to remove one gcc warning and make it easier for the compiler to optimize them out. This also fixes some style problems to make this patch match the version in the packages folder. This is copied from this commit to the mtd-utils we pack into the image: 56d0dd56e9c6efa79 ("mtd-utils: Mark some lzma functions as static") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/zlib: move zlib build to toolsHauke Mehrtens2018-04-287-13/+76
| | | | | | | | | | | | | This allows us to link the other tools against our libz and we do not need the system zlib any more. Only the static linked library is copied to the staging directory so we have a statically linked library on all systems and not only on Linux. This also adds the new dependencies of the packages which are depending on zlib. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* firmware-utils: tplink-safeloader: increase RE350 kernel sizeAlex Maclean2018-04-231-3/+3
| | | | | | | | 4.14 increased kernel size, so grow the kernel partition by 128K to compensate. Fixes FS#1479. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* tools: mkimage: provide dtc path during buildJo-Philipp Wich2018-04-191-0/+1
| | | | | | | | | | | | | | | | | The new mkimage version requires a CONFIG_MKIMAGE_DTC_PATH variable to be provided during build, in order to hardcode a path to a suitable DT compiler executable. Failure to do so will result in stray "sh: 1: -I: not found" errors when invoking mkimage for FIT image generation. Fix the issue by supplying "dtc" as CONFIG_MKIMAGE_DTC_PATH value during build. As we intend our host utilities to be relocatable and since we're already overriding PATH when invoking mkimage, an absolute path is not required. Fixes: b13e981d72 ("tools/mkimage: update to version 2018.03") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools/mkimage: update to version 2018.03Hauke Mehrtens2018-04-1815-1071/+147
| | | | | | | | This activates support for fit images and some other new mkimage features. Some of the patches were applied upstream and could be removed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/mpfr: Update to 4.0.1Daniel Engberg2018-04-111-2/+2
| | | | | | Update mpfr to 4.0.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/cmake: Update to 3.11.0Daniel Engberg2018-04-116-22/+6
| | | | | | | | Update cmake to 3.11.0 Remove 110-alpine_musl-compat.patch as it's integrated upstream Rename and refresh patches Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: increase kernel partition size for CPE/WBS 210/510Matthias Schiffer2018-04-101-8/+8
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* firmware-utils: tplink-safeloader: move CPE/WBS 210/510 version metainfo to ↵Matthias Schiffer2018-04-101-20/+20
| | | | | | | | | the end Having the metainfo between kernel and rootfs prevents us from resizing the kernel partition as necessary. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add support for TP-Link Archer C60 v2Henryk Heisig2018-04-071-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* firmware-utils: image generator for D-Link DAP-1330Nicolò Veronese2018-04-052-0/+205
| | | | Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* tools/e2fsprogs: update to 1.44.1Paul Wassi2018-03-311-2/+2
| | | | | | Update e2fsprogs to upstream 1.44.1 (feature and bugfix release) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* firmware-utils: mkdlinkfw: compile as gnu99Mathias Kresin2018-03-191-1/+1
| | | | | | Compile as gnu99 to fix the build. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: add JBOOT bootloader image supportPawel Dembicki2018-03-184-0/+921
| | | | | | | Tested on D-Link DWR-116. Based on mktplinkfw. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* firmware-utils: tplink-safeloader: compile as gnu99Alexander Couzens2018-03-152-5/+6
| | | | | | Also fix minor coding style issue and one redeclaration. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* firmware-utils: fix erroneous variable redeclarationJo-Philipp Wich2018-03-151-1/+0
| | | | | Fixes: 638e2193fe ("tplink-safeloader: add support to split & extract firmwares") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tplink-safeloader: add support to convert factory into sysupgradeAlexander Couzens2018-03-151-3/+103
| | | | | | | | | | | | Those converted factory images can be used to regain the original tp-link firmware. Be aware of firmware upgrade which additional require changes of other partition than os-image (kernel) & file-system (rootfs). OEM factory images from tplink can change nearly all partitions. However using those images, OpenWrt's sysupgrade will only modify the partitions os-image and file-system. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* tplink-safeloader: add support to split & extract firmwaresAlexander Couzens2018-03-151-17/+263
| | | | | | | Split the oem firmware upgrade images into seperate files. Useful when analysing oem firmware files. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* e2fsprogs: bump to 1.44.0Ansuel Smith2018-03-091-2/+2
| | | | | | Fix compilation error Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* tools/mkimage: copy mkenvimage to bin directoryEvgeniy Didin2018-02-131-0/+2
| | | | | | | | | | | | | | For some boards u-boot binary environment file is required, which is generated by mkenvimage utility. But in OpenWrt there is no separate support for mkenvimage, which is a part of u-boot tools. mkenvimage gets built in u-boot/tools as well as mkimage anyways. So lets just copy mkenvimage to the $(STAGING_DIR_HOST)/bin/ directory. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* ar71xx: add support for TP-Link RE355Henryk Heisig2018-02-131-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* tools: update patch to v2.7.6Russell Senior2018-02-122-27/+2
| | | | | | | Removes a redundant patch with a fix already upstream. Build tested on apm821xx (PPC). Signed-off-by: Russell Senior <russell@personaltelco.net>
* tools/ccache: update to 3.3.6Hannu Nyman2018-02-072-3/+3
| | | | | | | | | Update ccache to 3.3.6 Release notes: https://ccache.samba.org/releasenotes.html#_ccache_3_3_6 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/tar: update to 1.30Hannu Nyman2018-01-204-36/+16
| | | | | | update GNU tar to 1.30 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: tl-wr840n-v5: increase firmware partition for 4Mmtk layotSerg Studzinskii2018-01-181-1/+1
| | | | | | | | | | | According to console log during TP-Link TL-WR840N v5 OEM firmware update procedure 0x3e0000-0x3f0000 64kB "config" partition, which is used to store router's configuration settings, is erased and recreated again during every OEM firmware update procedure, thus does not contain any valuable factory data. So it is conviniant to use this extra 64kB erase block for jffs overlay due limited flash size on this device like it used on TP-Link's ar71xx boards. Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
* tools/mpfr: update to 4.0.0Hannu Nyman2018-01-183-10/+10
| | | | | | Update mpfr to 4.0.0 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/mpc: Update to 1.1.0Hannu Nyman2018-01-181-2/+2
| | | | | | | | Update mpc to 1.1.0 (note: adds compatibility with mpfr 4.0.0) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/cmake: update to 3.10.1Hannu Nyman2018-01-177-40/+16
| | | | | | | Update cmake to 3.10.1 Refresh patches Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 15:20:46 +0000