aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* Support booting the Speedport W502V using BRN-BOOT.John Crispin2012-02-143-0/+353
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 30532
* tools/genext2fs: do not include the host getline.h, it breaks the tool in ↵Felix Fietkau2012-02-121-1/+1
| | | | | | subtle ways, and the source already has a getline replacement SVN-Revision: 30479
* automake: forcibly disable perl ithreads support The SDK when build on a ↵Jo-Philipp Wich2012-02-011-1/+2
| | | | | | machine with perl ithreads enabled will fail to run on many Gentoo systems because perl is usually built without thread capability there. In order to circumvent this issue forcibly disable the ithreads support, tested on CentOS 5.6, Ubuntu 10.04 LTS and Gentoo. SVN-Revision: 29979
* autoconf: another relocatability fix for autom4te, substitute hardcoded ↵Jo-Philipp Wich2012-01-281-0/+13
| | | | | | prefix with $STAGING_DIR when reading autom4te.cfg SVN-Revision: 29931
* automake: generate relative aclocal symlinks in staging_dirJo-Philipp Wich2012-01-281-4/+4
| | | | SVN-Revision: 29929
* firmware-utils/mkmylofw: add WPE72 supportGabor Juhos2012-01-262-0/+4
| | | | | | Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29913
* libtool: fix accidental sed invocation in libtoolizeJo-Philipp Wich2012-01-212-5/+9
| | | | SVN-Revision: 29839
* quilt: some more relocatable fixes for quilt-internal scriptsJo-Philipp Wich2012-01-201-0/+63
| | | | SVN-Revision: 29834
* bison: make yacc wrapper relocatableJo-Philipp Wich2012-01-201-0/+20
| | | | SVN-Revision: 29831
* autoconf: make bin/autoconf relocatable as wellJo-Philipp Wich2012-01-201-0/+15
| | | | SVN-Revision: 29830
* quilt: make relocatable, search resources relative to STAGING_DIRJo-Philipp Wich2012-01-202-0/+20
| | | | SVN-Revision: 29829
* automake: further relocation fixesJo-Philipp Wich2012-01-202-1/+12
| | | | SVN-Revision: 29828
* autoconf: further relocation fixesJo-Philipp Wich2012-01-201-4/+43
| | | | SVN-Revision: 29827
* libtool: make relocatable, search resources relative to STAGING_DIRJo-Philipp Wich2012-01-201-0/+92
| | | | SVN-Revision: 29826
* autoconf: make relocatable by searching resources relative to STAGING_DIRJo-Philipp Wich2012-01-202-1/+101
| | | | SVN-Revision: 29821
* automake: make relocatable by searching resources relative to STAGING_DIRJo-Philipp Wich2012-01-201-0/+35
| | | | SVN-Revision: 29820
* tools: clean up Makefiles / make ccache workJohn Crispin2012-01-1513-83/+28
| | | | SVN-Revision: 29754
* firware-utils/mktplinkfw: add TL-WR2543N/ND supportGabor Juhos2012-01-071-0/+12
| | | | SVN-Revision: 29681
* firmware-utils/mktplinkfw: add support for TL-WA701N/NDGabor Juhos2012-01-041-0/+6
| | | | SVN-Revision: 29655
* firmware-utils/mktplinkfw: add support for TL-MR3020Gabor Juhos2012-01-041-0/+6
| | | | | | Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29650
* firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the imageGabor Juhos2011-12-151-1/+45
| | | | SVN-Revision: 29544
* tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layoutGabor Juhos2011-12-061-89/+125
| | | | SVN-Revision: 29466
* firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundaryGabor Juhos2011-12-051-14/+45
| | | | SVN-Revision: 29445
* tools/mkimage: allow to use different magic in uImagesGabor Juhos2011-12-051-0/+63
| | | | SVN-Revision: 29442
* firmware-utils/mktplinkfw: fix combined image creationGabor Juhos2011-12-031-1/+1
| | | | SVN-Revision: 29409
* build: add a lib64 symlink in staging_dir/host and staging_dir/toolchain* ↵Felix Fietkau2011-11-281-0/+1
| | | | | | for systems that prefer this as library path (e.g. current SuSE), fixes mpfr and gcc build SVN-Revision: 29352
* firmware-utils/mktplinfw: use htonl/ntohlGabor Juhos2011-11-241-44/+39
| | | | | | Based on a patch by Adrian Chadd <adrian@freebsd.org> SVN-Revision: 29327
* tools: use host build_dir instead of target build_dirNicolas Thill2011-11-233-3/+3
| | | | SVN-Revision: 29293
* firmware-utils/mktplinkfw: add TL-WR741ND v4Gabor Juhos2011-11-011-0/+9
| | | | SVN-Revision: 28707
* Add firmware tool for generating factory images for Edimax devicesVasilis Tsiligiannis2011-10-302-1/+261
| | | | SVN-Revision: 28688
* firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3Gabor Juhos2011-10-261-1/+1
| | | | SVN-Revision: 28602
* tools/lzma-old fix compile issues (patch from #10253)Felix Fietkau2011-10-211-4/+4
| | | | SVN-Revision: 28502
* upx: fix build errorNicolas Thill2011-10-211-1/+2
| | | | | | | | | g++ -O2 -Wall -W -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wwrite-strings -Werror -o compress.o -c compress.cpp cc1plus: warnings being treated as errors compress.cpp:75: error: unused parameter 'src' ... SVN-Revision: 28500
* squashfs4: Add support for LZMA Magic to unsquashfsJonas Gorski2011-10-191-0/+72
| | | | | | | | Some vendor firmwares use a different super block magic to indicate LZMA compression. This patches adds support for detecting this and enable extraction for those firmware's root filesystems. SVN-Revision: 28489
* add upx, but make it build only for ppc nowImre Kaloz2011-10-123-1/+192
| | | | SVN-Revision: 28428
* firmware-utils/mktplinkfw: add support for TL-WR703N v1Gabor Juhos2011-09-211-0/+9
| | | | | | Patch-by: dongyuqi <729650915@qq.com> SVN-Revision: 28278
* firmware-utils/mktplinkfw: add support for TL-WR743ND v1Gabor Juhos2011-09-211-0/+9
| | | | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 28270
* firmware-utils/mktplinkfw: add support for TL-WR740N v3Gabor Juhos2011-09-211-0/+9
| | | | | | Signed-off-by: Martin Raykov <martin.raykov@gmail.com> SVN-Revision: 28268
* mkimage/getline.h - Mac OS X 10.7 (Lion) fixLars-Peter Clausen2011-08-051-0/+22
| | | | | | | | This mends mkimage for getline() in Mac OS X 10.7. Signed-off-by: Joe Roback <openwrt-devel at roback.cc> SVN-Revision: 27917
* host/include/getline.h - Mac OS X 10.7 (Lion) fixLars-Peter Clausen2011-08-051-1/+1
| | | | | | | | | | | | | | | | Apple has finally updated their version of Libc, and it now includes getline(). \o/ The following patch fixes OpenWRT getline.h to not redefine it for 10.7. The one caveat is, the includes (at least stdio.h) are needed before the #ifdef so that __DARWIN_C_LEVEL could be properly defined (it is not a compiler built-in define like __linux__ or __APPLE__). This one fixes the host/include/getline.h. The next patch will mend the mkimage package. Signed-off-by: Joe Roback <openwrt-devel at roback.cc> SVN-Revision: 27916
* tools/quilt: fix spurious calls to the configure and Makefile targets (#8462)Felix Fietkau2011-08-011-0/+18
| | | | SVN-Revision: 27869
* autotools.mk: implement PKG_FIXUP:=patch-libtool This change allows to apply ↵Jo-Philipp Wich2011-08-013-0/+401
| | | | | | OpenWrt, Buildroot and OE libtool fixes to packages which fail badly at autoreconf. The fixup covers the common libtool versions 1.5, 2.2 and 2.4 and automatically determines the correct version to use. SVN-Revision: 27855
* quilt: make it possible to override the path to getopt (based on patch from ↵Felix Fietkau2011-07-311-1/+4
| | | | | | #9842) SVN-Revision: 27852
* squashfs4: fix a compile error on big-endian systems (patch from #9842)Felix Fietkau2011-07-311-1/+1
| | | | SVN-Revision: 27851
* squashfs4: add missing include for freebsd (patch from #9842)Felix Fietkau2011-07-311-1/+4
| | | | SVN-Revision: 27850
* pkg-config: fix prefixFelix Fietkau2011-07-241-1/+1
| | | | | | | | | | | | | | | | Now: % PATH=./staging_dir/host/bin:$PATH STAGING_PREFIX=/test PKG_CONFIG_PATH=$(echo staging_dir/target-*/usr/lib/pkgconfig) ./staging_dir/host/bin/pkg-config --cflags lua -I/test//include After applying the patch: % PATH=./staging_dir/host/bin:$PATH STAGING_PREFIX=/test PKG_CONFIG_PATH=$(echo staging_dir/target-*/usr/lib/pkgconfig) ./staging_dir/host/bin/pkg-config --cflags lua -I/test/include I guess that there sould not be '//' but only one '/'. Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net > SVN-Revision: 27744
* firmware-utils: rename the devname variable in mkwrgimg to avoid a clash ↵Felix Fietkau2011-07-081-4/+4
| | | | | | with a BSD stdlib function SVN-Revision: 27553
* tools/firmware-utils: add yet another buffalo toolGabor Juhos2011-07-062-0/+180
| | | | SVN-Revision: 27475
* tools/firmware-utils: allow to create buffalo image from two filesGabor Juhos2011-07-062-17/+111
| | | | SVN-Revision: 27473
* tools/firmware-utils: allow to create buffalo tags w/o hw versionGabor Juhos2011-07-061-1/+3
| | | | SVN-Revision: 27472
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 11:53:57 +0000