aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* tplink-safeloader: shorten version number of TP-Link WBS210 v2Bernhard Geier2019-11-231-3/+3
| | | | | | | | | "2.0" instead of "2.00" is sufficient and more in line with the other definitions. Signed-off-by: Bernhard Geier <freifunk@geierb.de> [commit message/title adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for the TP-LINK WBS510 V1Andrew Cameron2019-11-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
* ath79: add support for the TP-LINK WBS510 V2Andrew Cameron2019-11-221-0/+33
| | | | | | | | | | | | | | | | | | | | | | This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
* ath79: add support for the TP-LINK CPE220 V3Andrew Cameron2019-11-061-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move &eth0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron <apcameron@softhome.net> [DTS style fixes/improvements, updated commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tools/automake: Revert "Do not use $(V) - force AM_V=1"Fredrik Olofsson2019-11-061-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 43365ca66253 ("Do not use $(V) - force AM_V=1") as it breaks verbose output in automake packages, deviating from the upstream and expected behaviour. As you can see, neither make command outputs the expected verbose compile command lines: ``` $ make package/mtd-utils/{clean,compile} V=sc ... CCLD lsmtd CC nand-utils/nanddump.o CCLD nanddump ... ``` ``` $ make -C build_dir/target*/mtd-utils-2.1.1 clean ... $ make -C build_dir/target*/mtd-utils-2.1.1 V=1 ... CC lib/libmtd.o CC lib/libfec.o CC lib/common.o CC lib/libcrc32.o ``` The original reason for this commit was some packages failing to build if V is set to something other than 0 or 1. See the discussion in PR https://github.com/openwrt/openwrt/pull/2481 for how to fix this in the package Makefile. Ref: PR#2481 Acked-by: Mirko Vogt <mirko-openwrt@nanl.de> Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> [commit title/description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for TP-Link WBS210 v2Bernhard Geier2019-11-031-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link WBS210 v2 is an outdoor wireless CPE for 2.4 GHz with two Ethernet ports based on Atheros AR9344 The device is the same as TP-Link CPE220 v2, but with higher TX power (27 dBm instead of 12 dBm) and two antenna connectors instead of built-in antennas. Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP: 192.168.0.100 Stock device TFTP adress: 192.168.0.254 The TP-Link WBS devices use the same GPIOs as the CPE devices, except for the link4 LED. For this one, WBS devices use "2", while CPE devices use "16". (Tested on WBS210 v2) Signed-off-by: Bernhard Geier <freifunk@geierb.de> [added comment about GPIO] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rules.mk: remove "$(STAGING_DIR)/include"Sebastian Kemper2019-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "$(STAGING_DIR)/include" was carried over from buildroot-ng to OpenWrt in commit 60c1f0f64d23003a19a07d6b9638542130f6641d. buildroot has dropped this directory a long time ago. In OpenWrt the directory is still created by the PrepareStaging macro and is part of the default TARGET_CPPFLAGS. But nothing at all installs headers into this directory, nor should anything be installed under this path. Removing this directory from TARGET_CPPFLAGS will cut down the log noise a bit. Not only will CPPFLAGS be shorter, there will be less warnings set off by "-Wmissing-include-dirs" (or even failures when paired with "-Werror"). After all the directory does not even _exist_ in the SDKs, which are used on the build bots when building packages (see [1] and [2]). make[8]: Entering directory '/builder/shared-workdir/build/sdk/build_dir/target-aarch64_generic_musl/libmbim-1.20.0/src/common' CC libmbim_common_la-mbim-common.lo cc1: error: /builder/shared-workdir/build/sdk/staging_dir/target-aarch64_generic_musl/include: No such file or directory [-Werror=missing-include-dirs] cc1: all warnings being treated as errors [1] https://github.com/openwrt/packages/issues/10377 [2] https://github.com/openwrt/packages/pull/10378 Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Acked-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Rosen Penev <rosenp@gmail.com>
* tools/mkrasimage: Add support for 128k header sizeAndré Valentin2019-10-271-3/+8
| | | | | | 128k header size support is needed for ZyXEL NBG6716. Signed-off-by: André Valentin <avalentin@marcant.net>
* tools: keep stamp file in $(STAGING_DIR_HOST)Yousong Zhou2019-10-241-2/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: improve support for TP-Link CPE510 v2Adrian Schmutzler2019-10-211-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes commit bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") where the support for this device wasn't optimal. Device support for the CPE510v2 so far has been a hack to enable flashing with CPE510v1 images. Those even have different hardware (e.g. additional ethernet port). With this patch, we provide proper support for this device in ar71xx. Installation: - Flash factory image through stock firmware WEB UI or through TFTP - To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. - Rename factory image to recovery.bin - Stock TFTP server IP: 192.168.0.100 - Stock device TFTP address: 192.168.0.254 Fixes: bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") Signed-off-by: Andrew Cameron <apcameron@softhome.net> [Rebased onto revert commit, changed comments in mach-cpe510.c, changed commit title and description, fixed eth0 MAC address, removed eth1 initialization] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [squashed revert, added fixes tag] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tplink-safeloader: fix compilation warningsIlya Gordeev2019-10-191-12/+13
| | | | Signed-off-by: Ilya Gordeev <Mirraz@users.noreply.github.com>
* tools/e2fsprogs: Update to version 1.45.4Josef Schlehofer2019-10-081-2/+2
| | | | | | Fixes CVE-2019-5094 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* expat: Update to version 2.2.9Josef Schlehofer2019-10-061-2/+2
| | | | | | Fixes CVE-2019-15903 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ccache: update to 3.7.4DENG Qingfang2019-09-262-3/+3
| | | | | | | | | Update ccache to 3.7.4 Release notes: https://ccache.dev/releasenotes.html#_ccache_3_7_4 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* tools/coreutils: install "touch"Felix Fietkau2019-09-251-1/+1
| | | | | | | Fixes error in setting SOURCE_DATE_EPOCH timestamp on files on rootfs prepare on non-Linux systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scons: move to packages feedPetr Štetiar2019-09-154-62/+1
| | | | | | | | | | | | | | This patch removes scons host build tool, as commit 7087efd72a8d ("scons: move host build tool to a proper place") in the packages feed has moved scons into the new home. There are currently no packages in the master tree which would need scons, yet scons is build always as part of host tools, just in order to satisfy host build dependency of few packages in the packages feeds. Ref: https://github.com/openwrt/packages/pull/9584 Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/mkimage: Update U-Boot to version 2019.07Hauke Mehrtens2019-09-0410-159/+212
| | | | | | | | | | | | | This updates the U-Boot which provides the host tools like mkimage to version 2019.07. The patches were cleaned up and it was checked if this still compiles on Linux and FreeBSD. CONFIG_FIT_SIGNATURE_MAX_SIZE is set to the default value. The patch for libressl was merged upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* upslug2: Update to git repositoryRosen Penev2019-09-032-297/+7
| | | | | | | | | | | | | | This has two improvements over the current version. An autotools fix and application of the wrt350v2 patch. Cleaned up Makefile as a result of makefiles being fixed. Note that this package is not really used as it depends on orion, which is classified as broken. This is the last package that uses svn in the tree. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools: libelf: fix headers to trigger -Wundef warningsJo-Philipp Wich2019-09-031-0/+198
| | | | | | | | | | | | When libelf from tools/ is used for building the kernel, compilation aborts due to access to undefined defines since Kbuild adds -Wundef to the compiler flags. Patch the header files to use `#if defined(...)` instead of `#if ...` to prevent such issues. Ref: https://github.com/NixOS/nixpkgs/issues/59929 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: libelf: install pkg-config fileJo-Philipp Wich2019-09-031-1/+3
| | | | | | | Install the pkg-config definition for libelf in order to allow the kernel build process discover it later on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools/cmake: Update to 3.15.1Daniel Engberg2019-09-015-33/+22
| | | | | | | | | | | | Update CMake to 3.15.1 Refresh patches Remove inofficial fossies.org and replace with GitHub (link on official site) Remove 150-C-feature-checks-Match-warnings-more-strictly.patch as it's a no longer needed backport from upstream. Disable ccache if GCC is 4.8, 4.9 or 5.X to avoid build failures. Reference: https://github.com/openwrt/openwrt/pull/1929 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mtd-utils: update to 2.1.1DENG Qingfang2019-08-273-14/+16
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* make-ext4fs: update to HEAD of 2017-05-29 - eebda1Christian Lamparter2019-08-241-3/+3
| | | | | | | | | | | | | Update make-ext4fs to commit eebda1d55d9701ace2700d7ae461697fadf52d1f git log --pretty=oneline --abbrev-commit 484903e4..eebda1d5 eebda1d make_ext4: Add strict prototypes. bb9cf91 make_ext4fs: Remove off64_t in favor of standard off_t Created with the help of the make-package-update-commit.sh script. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tools/e2fsprogs: Update to 1.45.3Daniel Engberg2019-08-174-36/+13
| | | | | | | | | Update e2fsprogs to 1.45.3 Remove OpenBSD patch Remove Darwin patch, neither macports or brew patches these files Add patch to avoid crond detection on host OS Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/patch: apply upstream patch for cve-2019-13638Russell Senior2019-08-132-1/+39
| | | | | | | | | | | | GNU patch through 2.7.6 is vulnerable to OS shell command injection that can be exploited by opening a crafted patch file that contains an ed style diff payload with shell metacharacters. The ed editor does not need to be present on the vulnerable system. This is different from CVE-2018-1000156. https://nvd.nist.gov/vuln/detail/CVE-2019-13638 Signed-off-by: Russell Senior <russell@personaltelco.net>
* tools/scons: update scons to 3.1.1Russell Senior2019-08-131-2/+2
| | | | | | | | | | This version bump includes a bunch of fixes and improvements, which should fix gpsd build breakage in the package feeds. Ref: https://github.com/SCons/scons/blob/master/src/CHANGES.txt Signed-off-by: Russell Senior <russell@personaltelco.net> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for TP-Link CPE220 v2Adrian Schmutzler2019-08-071-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | This seems to be identical to CPE210 v1 despite having removable antennas. Specifications: * SoC: Qualcomm Atheros AR9344 (560 MHz) * RAM: 64MB * Storage: 8 MB * Wireless: 2.4GHz N based built into SoC 2x2 * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tplink-safeloader: increase kernel partition for CPE/WBSx10v1Adrian Schmutzler2019-08-071-8/+8
| | | | | | | | | | | | | This is a preparation for ath79 support of the CPE210/CPE510 v1. Kernel size is chosen equal to the latest update for CPE610 v1. This also updates the partition size in ar71xx target, so code remains consistent if someone looks up the device. Since CPE210, CPE510, WBS210 and WBS510 (all v1) share the same partition layout definition, and are on deprecated target anyway, this changes them all at once. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* expat: Update to 2.2.7Daniel Engberg2019-08-061-2/+2
| | | | | | Update (lib)expat to 2.2.7 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: uimage_padhdr: fix Coverity issuePetr Štetiar2019-08-041-12/+12
| | | | | | | | | | | | | | | | | | | Fixes following issue reported by Coverity scan: *** CID 1452085: Security best practices violations (TOCTOU) /tools/firmware-utils/src/uimage_padhdr.c: 100 in main() 94 95 if (!infname || !outfname) { 96 usage(argv[0]); 97 exit(1); 98 } 99 >>> CID 1452085: Security best practices violations (TOCTOU) >>> Calling function "stat" to perform check on "infname". 100 if (stat(infname, &statbuf) < 0) { Fixes: a1c6a316d299 ("ramips: add support for Fon FON2601") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ccache: update to 3.7.2DENG Qingfang2019-08-042-3/+3
| | | | | | | | | Update ccache to 3.7.2 Release notes: https://ccache.dev/releasenotes.html#_ccache_3_7_2 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* tools/patch: apply upstream patch for CVE-2019-13636Russell Senior2019-07-302-1/+109
| | | | | | | | | In GNU patch through 2.7.6, the following of symlinks is mishandled in certain cases other than input files. This affects inp.c and util.c. https://nvd.nist.gov/vuln/detail/CVE-2019-13636 Signed-off-by: Russell Senior <russell@personaltelco.net>
* tools/mklibs: update to 0.1.44 and convert to Python 3Daniel Golle2019-07-2611-22/+350
| | | | | | | | | | | | | | | | Since the switch to Python 3 build fails if CONFIG_USE_MKLIBS is set ("Strip unnecessary functions from libraries" in menuconfig) as mklibs hasn't been converted to run on Python 3. * update to most recent upstream version which brings some reproducibility fixes * converted to Python 3 using 2to3 * fixed mixed tab/spaces indentation * fixed use of string.* functions * some more minor fixes to make Python 3 happy Fixes commit 19938c8de7 ("build: switch to Python 3") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for Fon FON2601NOGUCHI Hiroshi2019-07-262-0/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FON2601 is a wireless router. Specification: - SoC: Mediatek MT7620A (580MHz) - RAM: 128 MiB - ROM: 16 MiB SPI Flash - Wireless: for 11b/g/n (upto 300 Mbps): MT7620A built-in WMAC for 11a/n/ac (upto 867 Mbps): MT7662E - Ethernet LAN: 1 port, upto 100 Mbps - Ethernet WAN: 1 port, upto 1000 Mbps - USB: 1 port (USB 2.0 host) - LEDs: 4 (all can be controlled by SoC's GPIO) - buttons: 1 (Displayed as "WPS" on enclosure) - serial port: 57600n8 pins: Vcc(3.3V), Rx, Tx, GND (left to right, viewed from outside of board) Installation (only available via UART): 1. download sysupgrade binary image by wget command 2. write sysupgrade binary image to Flash command is: mtd write sysupgrade.bin firmware 3. reboot Important Notice: Only one button is displayed as "WPS" on enclosure. However, it is configured as "reset" (factory resetting feature). Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/scons: switch to Python 3Petr Štetiar2019-07-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build tested on ath79 with following packages from packages feed which build depends on scons. None of them build anymore as it seems, that the SConscripts are written for Python2. * packages/net/iotivity (KO, doesn't build even with latest 1.3.1 release) SyntaxError: invalid syntax File "/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.2.1/build_common/SConscript", line 40 print "\nError: Current system (%s) isn't supported\n" % host LookupError: unknown encoding: string_escape: File "/home/petr/testing/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.3.1/SConstruct", line 28: SConscript('build_common/SConscript') * packages/net/smartsnmpd (KO, seems dead, no commit since 2015): SyntaxError: Missing parentheses in call to 'print' File "/openwrt/build_dir/target-mips_24kc_musl/smartsnmpd-2014-08-13/SConstruct", line 156 print "Can't find liblua or liblua5.1!" * packages/utils/gpsd (KO, doesn't build even with latest 3.18.1 release): AttributeError: 'list' object has no attribute 'keys': File "/openwrt/build_dir/target-mips_24kc_musl/gpsd-3.18.1/SConstruct", line 1758: all_manpages = list(base_manpages.keys()) + list(python_manpages.keys()) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/b43-tools/b43-fwsquash: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-3/+3
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools: libressl: fix compilation for non-glibc clib (FS#2400)Hans Dedecker2019-07-231-0/+23
| | | | | | | | | | | | | Fixes compilaton issue for non glibc clibs : libtool: compile: gcc -DPACKAGE_NAME=\"libressl\" -DPACKAGE_TARNAME=\"libressl\" -DPACKAGE_VERSION=\"2.9.2\" "-DPACKAGE_STRING=\"libressl 2.9.2\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libressl\" -DVERSION=\"2.9.2\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SYMLINK=1 -DHAVE_ERR_H=1 -DHAVE_ASPRINTF=1 -DHAVE_MEMMEM=1 -DHAVE_STRLCAT=1 -DHAVE_STRLCPY=1 -DHAVE_STRNDUP=1 -DHAVE_STRNLEN=1 -DHAVE_STRSEP=1 -DHAVE_TIMEGM=1 -DHAVE_SYSLOG=1 -DHAVE_ACCEPT4=1 -DHAVE_PIPE2=1 -DHAVE_POLL=1 -DHAVE_SOCKETPAIR=1 -DHAVE_EXPLICIT_BZERO=1 -DHAVE_GETAUXVAL=1 -DHAVE_GETAUXVAL=1 -DHAVE_DL_ITERATE_PHDR=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_VA_COPY=1 -DHAS_GNU_WARNING_LONG=1 -DSIZEOF_TIME_T=8 -I. -I../include -I../include/compat -DLIBRESSL_INTERNAL -D__BEGIN_HIDDEN_DECLS= -D__END_HIDDEN_DECLS= -I../crypto/asn1 -I../crypto/bn -I../crypto/ec -I../crypto/ecdsa -I../crypto/evp -I../crypto/modes -I../crypto -I/builds/pantacor/pv-platforms/openwrt-base/openwrt/staging_dir/host/include -D_DEFAULT_SOURCE -D_BSD_SOURCE -D_POSIX_SOURCE -D_GNU_SOURCE -D__STRICT_ALIGNMENT -O2 -I/builds/pantacor/pv-platforms/openwrt-base/openwrt/staging_dir/host/include -fpic -Wall -std=gnu99 -fno-strict-aliasing -fno-strict-overflow -D_FORTIFY_SOURCE=2 -fstack-protector-strong -DHAVE_GNU_STACK -Wno-pointer-sign -MT compat/getprogname_linux.lo -MD -MP -MF compat/.deps/getprogname_linux.Tpo -c compat/getprogname_linux.c -o compat/getprogname_linux.o compat/getprogname_linux.c: In function 'getprogname': compat/getprogname_linux.c:32:2: error: #error "Cannot emulate getprogname" #error "Cannot emulate getprogname" ^~~~~ Reported-by: Anibal Portero <anibal.portero@pantacor.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools: libressl: fix build on MacOSKevin Darbyshire-Bryant2019-07-221-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Making all in tests depbase=`echo handshake_table.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DPACKAGE_NAME=\"libressl\" -DPACKAGE_TARNAME=\"libressl\" -DPACKAGE_VERSION=\"2.9.2\" -DPACKAGE_STRING=\"libressl\ 2.9.2\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libressl\" -DVERSION=\"2.9.2\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_SYMLINK=1 -DHAVE_ERR_H=1 -DHAVE_READPASSPHRASE_H=1 -DHAVE_ASPRINTF=1 -DHAVE_MEMMEM=1 -DHAVE_READPASSPHRASE=1 -DHAVE_STRLCAT=1 -DHAVE_STRLCPY=1 -DHAVE_STRNDUP=1 -DHAVE_STRNLEN=1 -DHAVE_STRSEP=1 -DHAVE_TIMEGM=1 -DHAVE_GETPROGNAME=1 -DHAVE_SYSLOG=1 -DHAVE_POLL=1 -DHAVE_SOCKETPAIR=1 -DHAVE_ARC4RANDOM=1 -DHAVE_ARC4RANDOM_BUF=1 -DHAVE_ARC4RANDOM_UNIFORM=1 -DHAVE_TIMINGSAFE_BCMP=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_VA_COPY=1 -DHAVE___VA_COPY=1 -DSIZEOF_TIME_T=8 -I. -I../include -I../include/compat -DLIBRESSL_INTERNAL -D__BEGIN_HIDDEN_DECLS= -D__END_HIDDEN_DECLS= -I ../crypto/modes -I ../crypto/asn1 -I ../ssl -I ../tls -I ../apps/openssl -I ../apps/openssl/compat -D_PATH_SSL_CA_FILE=\"../apps/openssl/cert.pem\" -I/Users/kevin/wrt/staging_dir/host/include -D__STRICT_ALIGNMENT -O2 -I/Users/kevin/wrt/staging_dir/host/include -fpic -Wall -std=gnu99 -fno-strict-aliasing -fno-strict-overflow -D_FORTIFY_SOURCE=2 -fstack-protector-strong -Qunused-arguments -Wno-pointer-sign -MT handshake_table.o -MD -MP -MF $depbase.Tpo -c -o handshake_table.o handshake_table.c &&\ mv -f $depbase.Tpo $depbase.Po make[4]: *** No rule to make target `/Users/kevin/wrt/build_dir/host/libressl-2.9.2/crypto/.libs/libcrypto_la-cpuid-macosx-x86_64.o', needed by `handshake_table'. Stop. make[3]: *** [all-recursive] Error 1 A similar error & clues from https://gitlab.com/ymorin/buildroot/commit/e783d60473944f8b39f1def45d8d6b483a062158 " LibreSSL 2.9.1 now has a test that requires libtls.a, however, when building a shared library only build, the --disable-static flag is passed to libressl, which prevents the building of libtls.a. With libtls.a not being built, the following error occurs: libressl-2.9.1/tls/.libs/libtls.a', needed by 'handshake_table'. Stop. There are three options to fix this: 1) Stick with autotools, and provide a patch that removes building anything in the tests folder. 2) Pass --enable-static to LIBRESSL_CONF_OPTS 3) Change the package type to cmake, as a cmake build does not have this issue." It appears we cannot change to cmake because cmake has a dependency on an ssl library. Take option 1 and do not build the tests. Also take the opportunity to remove man page building as well. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools: libressl: update to 2.9.2 versionRoman Yeryomin2019-07-211-2/+2
| | | | | | To keep in sync with OpenSSL 1.1.x branch version options. Signed-off-by: Roman Yeryomin <roman@advem.lv>
* firmware-utils: mkfwimage: fix build failure on macOS with gcc 9Petr Štetiar2019-07-191-2/+3
| | | | | | | | | | | | | | | | | Fixes following errors: src/mkfwimage.c:279:8: error: format specifies type 'long' but the argument has type 'off_t' (aka 'long long') [-Werror,-Wformat] d->stats.st_size, ^~~~~~~~~~~~~~~~ src/mkfwimage.c:280:8: error: format specifies type 'long' but the argument has type 'long long' [-Werror,-Wformat] d->partition_length - d->stats.st_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/mkfwimage.c:378:6: error: format specifies type 'unsigned long' but the argument has type 'long long' [-Werror,-Wformat] d->stats.st_size - d->partition_length); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* firmware-utils: mkfwimage: fix more errors reported by gcc-6/7/9Petr Štetiar2019-07-193-13/+15
| | | | | | | | | | | | | | | | | | | | | src/mkfwimage.c:276:8: error: format '%lld' expects argument of type 'long long int', but argument 4 has type '__off_t' {aka 'const long int'} [-Werror=format=] src/fw.h:71:36: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__off_t' {aka 'long int'} [-Werror=format=] inlined from 'main' at src/mkfwimage.c:543:12: /string_fortified.h:106:10: error: '__builtin_strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Werror=stringop-truncation] inlined from 'write_part' at src/mkfwimage.c:235:2, string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation] inlined from 'main' at src/mkfwimage.c:477:5: string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation] inlined from 'main' at src/mkfwimage.c:496:5: string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation] inlined from 'main' at src/mkfwimage.c:481:5: string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation] inlined from 'main' at src/mkfwimage.c:485:5: string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation] Runtested on ath79 and UBNT Bullet M XW. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* firmware-utils: mkfwimage: fix more errorsKevin Darbyshire-Bryant2019-07-191-4/+4
| | | | | | | | | Fix 4 errors reported by gcc 9 3 mismatched format type errors 1 unused variable error Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* firmware-utils: mkfwimage: provide human readable errorPetr Štetiar2019-07-191-1/+7
| | | | | | | | | | | | | While looking at the ath25 build breakage of 19.07 images today I've encountered following error: mkfwimage -B XS5 -v [...] ath25-ubnt5-squashfs-sysupgrade.bin.new ERROR: Failed creating firmware layout description - error code: -2 Which is barely human readable and needs poking into the source code, so this patch makes the error more verbose and usable by mere mortals. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* firmware-utils: mkfwimage: enable extra compiler checks and fix themPetr Štetiar2019-07-192-7/+12
| | | | | | | Let's enforce additional automatic checks enforced by the compiler in order to catch possible errors during compilation. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for TP-Link CPE510-v2/v3Andrew Cameron2019-07-181-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, and 4 green LEDs - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna - Adjustable transmission power from 0 to 23dBm/200mw Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> [whitespace fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add support for TP-Link RE650 v1Georgi Vlaev2019-07-171-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE650 v1 is a dual-band AC2600 range extender, based on MediaTek MT7621A and MT7615E. According to the wikidevi entry for RE650 this device is identical with TP-Link RE500 as hardware. This patch supports only RE650. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin from the RE650 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does *not* accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com> [re-added variables for kernel header] Signed-off-by: David Bauer <mail@david-bauer.net>
* tools/gengetopt: Update to 2.23Daniel Engberg2019-07-084-29/+38
| | | | | | | | | Update gengetopt to 2.23 Remove 100-dependency_fix.patch, fixed upstream Rework no tests and docs patch Fix typo in copyright section Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ath79: increase kernel partition size for CPE610v1Andrew Cameron2019-07-071-2/+2
| | | | | | | | | Increase the Kernel partition to address the issue discussed here https://forum.openwrt.org/t/cpe610-v1-sysupgrade-bin-missing-too-big/39637/5 Switch Back to the okli Loader to support increased partition size Signed-off-by: Andrew Cameron <apcameron@softhome.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [add <> for e-mail]
* ath79: add support for TP-Link CPE610-v1Andrew Cameron2019-06-241-0/+39
| | | | | | | | | | | | | | | | | | | | | TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, WLAN5G green LEDs - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
* tools/bison: Update to 3.4.1Daniel Engberg2019-06-223-16/+3
| | | | | | | Update bison to 3.4.1 Remove 010-intl-stub-compat.patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:08:58 +0000