aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* tools/e2fsprogs: Update to 1.44.5Daniel Engberg2018-12-271-2/+2
| | | | | | Update e2fsprogs to 1.44.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: add hex pattern mode for xorimageINAGAKI Hiroshi2018-12-241-3/+36
| | | | | | | | | | | | This commit adds "hex pattern mode" to xorimage. This mode allows xor with a hexadecimal pattern that cannot be expressed with ASCII charactors. usage (example): xorimage -i firmware.bin -o firmware.bin.new -p 6A57190601121E4C -x Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (fix checkpatch)
* tools/mtools: Update to 4.0.23Daniel Engberg2018-12-242-21/+4
| | | | | | | Update mtools to 4.0.23 Drop patch, workaround in upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools: Update endian definitions for Mac OSXKevin Darbyshire-Bryant2018-12-191-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | - it appears (at least from OS X verison 10.10, Yosemite) that the big and little endian defintions have changed. the older #include <sys/_endian.h> #include <architecture/byte_order.h> reference yielded the following warning: #define __bswap_16(x) NXSwapShort(x) ^ /usr/include/architecture/byte_order.h:45:1: note: 'NXSwapShort' has been explicitly marked deprecated here For the new OS X editions, it seems that we need to refer to: #include <netinet/in.h> #include <libkern/OSByteOrder.h> and respectively use 'OSSwapInt16', 'OSSwapInt32', & 'OSSwapInt64', in place of 'NXSwapShort', 'NXSwapLong' & 'NXSwapLongLong'. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: add support for TP-Link Archer A7Karl-Felix Glatzer2018-12-171-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
* tools/sdimage: Fix build with host Linux headers < 3.18Hauke Mehrtens2018-12-161-0/+13
| | | | | | | | The ufb tool needs the host UAPI Linux headers from kernel 3.18 or later, remove it for now as it is not used anyway. Fixes: 4bf5c4395b3 ("tools/sdimage: update to latest git version") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/sdimage: update to latest git versionMichael Heimpold2018-12-161-3/+3
| | | | | | | This includes code cleanups and fixes some portability issues, compiler warnings about printf arguments etc. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ramips: use new image build code for D-Link DCS-930 familyMathias Kresin2018-12-122-40/+0
| | | | | | | | | | | | Drop the factory images and the firmware tool to create them. They don't work any more, since the factory image has an uImage header covering the whole kernel + rootfs. This way the uImage splitter will not be able to find the rootfs and the kernel will panic later on. The factory images were most likely added at a time the board had distinct partitions for kernel and rootfs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools/bison: Update to 3.2.2Daniel Engberg2018-11-271-2/+2
| | | | | | Update bison to 3.2.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* flex: Add a lex symlinkRosen Penev2018-11-251-0/+5
| | | | | | | | | | Some packages like libpfring assume the presense of lex, which on some other systems is a symlink to flex but not all. Symlink flex to fix compilation. Arch Linux and Fedora do this as far as I know. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools: tplink-safeloader: add C7v5 EU SupportListDavid Bauer2018-11-231-1/+5
| | | | | | | | | | Currently flash from WebIF is broken for Archer C7 v5 EU models as their SupportList entries are missing. The added entries originate from TP-Links latest Archer C7 v5 EU firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* bison: update to 3.2.1Hans Dedecker2018-11-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Chnages since 3.2: b590ad02 version 3.2.1 05e70adf build: fix issues in the generated tarball 7efe0b5d build: fix typo 351e3630 NEWS: update 4fd1fc70 examples: ship them e02ce4c7 build: minor fixes in doc/ 7cab285e CI: maximize chances of errors sooner 86efe282 c++: improve the generated documentation cf1446dc tests: don't fail if the C++ compiler does not work e93c40b3 tests: don't disable C++ warnings in C files eff67391 c++: workaround portability issue 5a0d7802 tests: work around getopt portability issues f1e0839c doc: -Wzero-as-null-pointer-constant was added to GCC 4.7 3bf429ae examples: #include <cstring> in calc++ f8cadc73 c: provide a definition of _Noreturn that works for C++ bd7aebb8 c: update the definition of _Noreturn ca8039e6 tests: don't expect the shell to support 'local' 5d07f4f7 bitset: fix warning e605ad96 build: fix use of gnulib Make variables 50fac71d maint: post-release administrivia Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/pkg-config: Handle variable substitution of 'bindir' to redirect to ↵Ted Hess2018-11-131-1/+1
| | | | | | STAGING_DIR/bin Signed-off-by: Ted Hess <thess@kitschensync.net>
* tools/cmake: Update to 3.12.4Daniel Engberg2018-11-121-2/+2
| | | | | | Update cmake to 3.12.4 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools: firmware-utils: mksercommfw build on DarwinKevin Darbyshire-Bryant2018-11-091-2/+21
| | | | | | | | | asm/byteorder.h & hence __cpu_to_be32() doesn't exist on Darwin Shamelessly copy some byte swap functions from oseama.c Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: fix netgear r6120 factory image generationKoen Vandeputte2018-11-081-169/+317
| | | | | | | | | | | | | | | | | | | | | | | as indicated in commit c5bf408ed6bd "(ramips: fix image generation for mt76x8") more rework was needed to fix the other issues. Building on another machine, but using the same arch, showed the application failing again for different reasons. Fix this by completely rewriting the application, fixing following found issues: - buffer overflows, resulting in stack corruption - flaws in memory requirement calculations (too small, too large) - memory leaks - missing bounds checking on string handling - non-reproducable images, by using unitilized memory in checksum calculation - missing error handling, resulting in succes on specific image errors - endianness errors when building on BE machines - various minor build warnings - documentation did not match the code actions (header item locations) - allowing input to be decimal, hex or octal now Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: fix image generation for mt76x8Koen Vandeputte2018-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | Buildbot fails to generate images for targets also generating a Sercomm binary with following error: Opening file: /mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img.rootfs.zip Filesize: 3648606 . mksercommfw: malloc.c:2427: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed. Makefile:287: recipe for target '/mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img' failed Debugging using valgrind shows stack corruption due to a buffer overflow. The author of the generator assumes the filename ends with "root", while it should be "rootfs". Fix this by accounting for the 2 missing characters which solves the build issues. More work is required to cleanup this source, which will be done later on. Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/bison: update to version 3.2Hannu Nyman2018-11-051-2/+2
| | | | | | Update bison to version 3.2 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/patch: Add fedora patch for crashing git style patchesRosen Penev2018-11-012-1/+54
| | | | | | | | https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html I assume a CVE number will be assigned soon. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: fix libressl build on x32 (amd64ilp32) hostThorsten Glaser2018-11-011-0/+4
| | | | | | disable use of assembly code since x32 gets misdetected as amd64 Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
* tools/ccache: update to 3.5Hannu Nyman2018-11-012-3/+3
| | | | | | Update ccache to 3.5 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ar71xx: fix sysupgrade generation for some targetsKoen Vandeputte2018-10-291-12/+6
| | | | | | | | | | | | | | | | | These targets are already defined as having a dynamic partition but the safeloader was not adapted for them. This causes a build warning for the sysupgrade image being too big. Targets: - c58-v1 - c60-v1 - c60-v2 - TL-WR1043 v5 - TL-WR902AC v1 - TL-WR942N V1 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: switch more targets to dynamic partitioningKoen Vandeputte2018-10-291-30/+13
| | | | | | | | | | | | | Targets: - TP-LINK ER355 - TP-LINK C25 V1 - TP-LINK C59 V1 - TP-LINK C7 V4 - TP-LINK C7 V5 Fixes build issues seen due to the kernel being too big Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: switch TP-Link RE450 v1 to dynamic partitioningRadek Dostál2018-10-291-7/+2
| | | | | | | | | | | | | | | | | As mentioned in commit 5f24933 recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for RE450. RE450 images were not build due to the following error message: os-image partition too big (more than 1572864 bytes): Success Tested on RE450, device boots and was used to send this patch. Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Radek Dostál <rd@radekdostal.com> [rewrote commit msg keeping it tight + fixed SoB lines] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/pkg-config: pass arguments at the endArthur Skowronek2018-10-201-1/+1
| | | | | | | | | | | | | | | | | | Go for openwrt passes pkg-config arguments in the format of pkg-config --cflags -- pkg-name which in turn will be passed down to the real pkg-config as something like pkg-config.real --cflags -- pkg-name --define... and causes the real pkg-config implementation to missinterpret the given argument list. This also helps to fix https://github.com/golang/go/issues/27940 Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io>
* tools/xz: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-10-161-0/+1
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/libressl: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-10-161-0/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools: patch: Add missing CVE-2018-6951 fixRosen Penev2018-10-164-12/+33
| | | | | | | | | | uscan reports a new CVE now that PKG_CPE_ID was added. Reordered patches by date. Signed-off-by: Rosen Penev <rosenp@gmail.com> [re-title commit & refresh patches] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools: patch: Fix build by not modifing Makefile.amHauke Mehrtens2018-10-143-73/+3
| | | | | | | | | | | | | | A new test case was adding in one of the patches fixing a problem, this also included a change in the test/Makefile.am to add this test case. The build system detected a change in the Makefile.am and wants to regenerate the Makefile.in, but this fails because automake-1.15 is not installed yet. As automake depends on patch being build first, make sure we do not modify the Makefile.am. This fixes build problem seen by the build bots. Fixes: 4797dddfde6 ("patch: apply upstream cve fixes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: patch: make patch build depend on automakeHauke Mehrtens2018-10-141-0/+1
| | | | | | | | | | The Makefile.am changed and now patch wants to use automake to regenerate the Makefile.in. Make sure automake was build before we build patch. This fixes build problem seen by the build bots. Fixes: 4797dddfde6 ("patch: apply upstream cve fixes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* patch: apply upstream cve fixesRussell Senior2018-10-143-0/+241
| | | | | | | | | | | | | Apply two upstream patches to address two CVEs: * CVE-2018-1000156 * CVE-2018-6952 Add PKG_CPE_ID to Makefile. Build tested on apm821xx and ar71xx. Signed-off-by: Russell Senior <russell@personaltelco.net>
* mkfwimage: Add image type definition for WA imagesTobias Schramm2018-10-072-47/+129
| | | | | | | | | | | | | This patch adds a new type of ubiquiti image, the WA image. First seen on the NanoStation AC loco the generic name implies that we will see this type of image on more ubiquiti devices thus it makes sense to implement it in mkfwimage. The main difference is that WA images are signed. The "END" header has been replaced by a "ENDS" header followed by a 2048 bit RSA signature. This signature is not being generated by mkfwimage and filled with 0x00. Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* tools/cmake: Update to 3.12.3Daniel Engberg2018-10-072-14/+2
| | | | | | Update CMake to 3.12.3 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/bison: Update to 3.1Daniel Engberg2018-10-073-6/+4
| | | | | | Update bison to 3.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/libressl: Update to 2.8.1Daniel Engberg2018-10-071-3/+3
| | | | | | Update libressl to 2.8.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mtools: Update to 4.0.19Daniel Engberg2018-10-071-4/+3
| | | | | | Update mtools to 4.0.19 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/e2fsprogs: fix build with clangFelix Fietkau2018-09-151-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/expat: fix docbook2man error on some systemsMarko Ratkaj2018-09-111-0/+3
| | | | | | | | On some systems (Gentoo) configure stage fails because of docbook2man working with SGML rather than with XML. We don't need xmlwf man pages so we disable this. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* tools/expat: Update to 2.2.6Daniel Engberg2018-09-101-2/+2
| | | | | | Update (lib)expat to 2.2.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/e2fsprogs: Update to 1.44.4Daniel Engberg2018-09-101-2/+2
| | | | | | Update e2fsprogs to 1.44.4 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: mkedimaximg: add "big-endianness mode" optionINAGAKI Hiroshi2018-09-101-8/+35
| | | | | | | | | In addition to the default little-endianness format, I added a mode so that we can generate firmware with big-endianness format. example: ELECOM WRC-300GHBK2-I (QCA9563) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* tools/cmake: Update to 3.12.2Daniel Engberg2018-09-091-2/+2
| | | | | | Update CMake to 3.12.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* build: add mkrasimageDavid Bauer2018-08-282-0/+460
| | | | | | | | | | | | | | | The current make-ras.sh image generation script for the ZyXEL NBG6617 has portability issues with bash. Because of this, factory images are currently not built correctly by the OpenWRT buildbots. This commit replaces the make-ras.sh by C-written mkrasimage. The new mkrasimage is also compatible with other ZyXEL devices using the ras image-format. This is not tested with the NBG6616 but it correctly builds the header for ZyXEL factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware-utils/mksercommfw: fix build with clang/macOSRyan Mounce2018-08-141-1/+1
| | | | | | | | fixes error: non-void function 'main' should return a value Fixes: FS#1770 Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* firmware-utils/mksercommfw: fix musl buildAndy Walsh2018-08-131-0/+1
| | | | | | * add missing <sys/types.h> for musl Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* tools/cmake: Update to 3.12.1Daniel Engberg2018-08-132-3/+3
| | | | | | Update cmake to 3.12.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: add sercomm/netgear toolLudwig Thomeczek2018-08-132-0/+255
| | | | | | | | | | | This adds a tool to generate a firmware file accepted by Netgear or sercomm devices. They use a zip-packed rootfs with header and a custom checksum. The generated Image can be flashed via the nmrpflash tool or the webinterface of the router. Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
* tools: findutils: fix compilation with glibc 2.28Luis Araneda2018-08-101-0/+104
| | | | | | | Add a temporary workaround to compile with glibc 2.28 as some constants were removed and others made private Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* tools: m4: fix compilation with glibc 2.28Luis Araneda2018-08-101-0/+118
| | | | | | | Add a temporary workaround to compile with glibc 2.28 as some constants were removed and others made private Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ar71xx: add support for TP-LINK CPE510 V2.0Andrew Cameron2018-08-021-1/+11
| | | | | | | | Adds Support for the TP-LINK CPE510 V2.0 by TP-Link. The hardware is almost the same as the CPE510 V1.0 Follow the same processes as for the CPE510 V1.0 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 13:20:15 +0000