aboutsummaryrefslogtreecommitdiffstats
path: root/tools
Commit message (Collapse)AuthorAgeFilesLines
* tools: mkimage: fix __u64 typedef conflict with new glibcYousong Zhou2019-09-121-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Including "sys/stat.h" from newer glibc will cause __u64 from linux uapi header to be included, causing compilation failure for u-boot tools USE_HOSTCC Remove typedef for __u64 in include/compiler.h to fix the issue. It should be safe because as of u-boot-2018.03, no ref to __u64 is found under u-boot tools/ directory Error message snippet follows HOSTCC tools/mkenvimage.o In file included from /usr/include/asm-generic/types.h:7, from /usr/include/asm/types.h:5, from /usr/include/linux/types.h:5, from /usr/include/linux/stat.h:5, from /usr/include/bits/statx.h:30, from /usr/include/sys/stat.h:446, from tools/mkenvimage.c:21: /usr/include/asm-generic/int-ll64.h:31:42: error: conflicting types for '__u64' 31 | __extension__ typedef unsigned long long __u64; | ^~~~~ In file included from <command-line>: ././include/compiler.h:69:18: note: previous declaration of '__u64' was here 69 | typedef uint64_t __u64; | ^~~~~ make[5]: *** [scripts/Makefile.host:116: tools/mkenvimage.o] Error 1 Ref: https://forum.openwrt.org/t/compile-error-19-07/44423 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1699194 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* tools/patch: apply upstream patch for cve-2019-13638Russell Senior2019-08-142-1/+39
| | | | | | | | | | | | | GNU patch through 2.7.6 is vulnerable to OS shell command injection that can be exploited by opening a crafted patch file that contains an ed style diff payload with shell metacharacters. The ed editor does not need to be present on the vulnerable system. This is different from CVE-2018-1000156. https://nvd.nist.gov/vuln/detail/CVE-2019-13638 Signed-off-by: Russell Senior <russell@personaltelco.net> (cherry picked from commit bcfd1d76852974170780dbe368e6194dbb0e123e)
* tools/patch: apply upstream patch for CVE-2019-13636Russell Senior2019-08-142-1/+109
| | | | | | | | | | In GNU patch through 2.7.6, the following of symlinks is mishandled in certain cases other than input files. This affects inp.c and util.c. https://nvd.nist.gov/vuln/detail/CVE-2019-13636 Signed-off-by: Russell Senior <russell@personaltelco.net> (cherry picked from commit 995bcc532943639f3df36dbcaa361f9167f9f4d5)
* tools/pkg-config: Handle variable substitution of 'bindir' to redirect to ↵Ted Hess2019-04-241-1/+1
| | | | | | | STAGING_DIR/bin Signed-off-by: Ted Hess <thess@kitschensync.net> (cherry picked from commit 042d68a19593ac796098845366a235f5465816da)
* tools/pkg-config: pass arguments at the endArthur Skowronek2019-04-241-1/+1
| | | | | | | | | | | | | | | | | | | Go for openwrt passes pkg-config arguments in the format of pkg-config --cflags -- pkg-name which in turn will be passed down to the real pkg-config as something like pkg-config.real --cflags -- pkg-name --define... and causes the real pkg-config implementation to missinterpret the given argument list. This also helps to fix https://github.com/golang/go/issues/27940 Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io> (cherry picked from commit 5f2cb6d7dc9de24bec7b1139f8d785f0e7588eed)
* tools/libelf: Add mirrors as main site is deadDaniel Engberg2019-03-171-2/+3
| | | | | | | Main site hasn't resolved for days so just add a few mirrors instead Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> (cherry picked from commit a56c21f582810a28e9493dcfae584132d7ea9451)
* tools/firmware-utils: fix sysupgrade typo in mkdapimg2Hans Dedecker2019-01-131-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/firmware-utils: fix sysupgrade typo in mkdapimgHans Dedecker2019-01-131-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/e2fsprogs: Update to 1.44.2Daniel Engberg2018-12-181-2/+2
| | | | | | | Update e2fsprogs to 1.44.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> (backported from 651a62353b02a61f685e34ad6eaea8e61394a741)
* flex: Add a lex symlinkRosen Penev2018-12-181-0/+5
| | | | | | | | | | | Some packages like libpfring assume the presense of lex, which on some other systems is a symlink to flex but not all. Symlink flex to fix compilation. Arch Linux and Fedora do this as far as I know. Signed-off-by: Rosen Penev <rosenp@gmail.com> (backported from 7ef38e42c8440a29d1dc721a9e6184b2e369bc2f)
* tools/ccache: update to 3.5Hannu Nyman2018-12-182-3/+3
| | | | | | | Update ccache to 3.5 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (backported from b0a2e60793f194a7a33e93a12f9ca5f2ae410529)
* tools/xz: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-12-181-0/+1
| | | | | Signed-off-by: Rosen Penev <rosenp@gmail.com> (backported from 622176262d4b8093eda1704e052ae97d74c85c7f)
* tools/libressl: Add PKG_CPE_ID for proper CVE trackingRosen Penev2018-12-181-0/+2
| | | | | Signed-off-by: Rosen Penev <rosenp@gmail.com> (backported from 74a5c619dc4322314e6db63f2ab113e61958665e)
* tools/patch: Add fedora patch for crashing git style patchesRosen Penev2018-12-182-1/+54
| | | | | | | | | https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html I assume a CVE number will be assigned soon. Signed-off-by: Rosen Penev <rosenp@gmail.com> (backported from 32fc41baabc9e83a045a7a805b0d91a030cfbd3c)
* tools: patch: Add missing CVE-2018-6951 fixRosen Penev2018-12-184-12/+33
| | | | | | | | | | | uscan reports a new CVE now that PKG_CPE_ID was added. Reordered patches by date. Signed-off-by: Rosen Penev <rosenp@gmail.com> [re-title commit & refresh patches] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (backported from a6bd9d0cb652686453604b762e80a35d023908c4)
* tools: patch: Fix build by not modifing Makefile.amHauke Mehrtens2018-12-182-55/+0
| | | | | | | | | | | | | | | A new test case was adding in one of the patches fixing a problem, this also included a change in the test/Makefile.am to add this test case. The build system detected a change in the Makefile.am and wants to regenerate the Makefile.in, but this fails because automake-1.15 is not installed yet. As automake depends on patch being build first, make sure we do not modify the Makefile.am. This fixes build problem seen by the build bots. Fixes: 4797dddfde6 ("patch: apply upstream cve fixes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (backported from 759f111f8d7f2d9f5f12713fc6f48ce6422997ec)
* tools: patch: make patch build depend on automakeHauke Mehrtens2018-12-181-0/+1
| | | | | | | | | | | The Makefile.am changed and now patch wants to use automake to regenerate the Makefile.in. Make sure automake was build before we build patch. This fixes build problem seen by the build bots. Fixes: 4797dddfde6 ("patch: apply upstream cve fixes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (backported from 07e8c217cb79a19c59fcb34ea6de39aa91a625b6)
* patch: apply upstream cve fixesRussell Senior2018-12-183-0/+226
| | | | | | | | | | | | | | | | Apply two upstream patches to address two CVEs: * CVE-2018-1000156 * CVE-2018-6952 Add PKG_CPE_ID to Makefile. Build tested on apm821xx and ar71xx. Signed-off-by: Russell Senior <russell@personaltelco.net> (backported from 4797dddfde6a8ffdbdcb4e5b5e137b0a00313f62) (rebased patches) Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix libressl build on x32 (amd64ilp32) hostThorsten Glaser2018-12-181-0/+4
| | | | | | | disable use of assembly code since x32 gets misdetected as amd64 Signed-off-by: Thorsten Glaser <tg@mirbsd.org> (backported from a395563f68fde6f52dbf10913f59f13b8c804cd5)
* tools/expat: fix docbook2man error on some systemsMarko Ratkaj2018-12-181-0/+3
| | | | | | | | | On some systems (Gentoo) configure stage fails because of docbook2man working with SGML rather than with XML. We don't need xmlwf man pages so we disable this. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr> (backported from 6e80dd58bb6c8c146ed8fd7ed538e96db4e8cc13)
* tools/ccache: update to 3.4.2Hannu Nyman2018-12-182-5/+5
| | | | | | | update version and refresh patch Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (backported from 7ec931b7f01e8e9dc6463069237097950761996a)
* tools/cmake: update to 3.11.4Hannu Nyman2018-12-182-3/+3
| | | | | | | Update cmake and refresh patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (backported from 55fa8068c4eb1f6213ca115655067e635da3e637)
* tools: tplink-safeloader: add C7v5 EU SupportListDavid Bauer2018-11-231-1/+5
| | | | | | | | | | | Currently flash from WebIF is broken for Archer C7 v5 EU models as their SupportList entries are missing. The added entries originate from TP-Links latest Archer C7 v5 EU firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 53020ed4b981d8d48394842d0aff1a0d0497cc1c)
* tools/bison: Update to 3.0.5Daniel Engberg2018-08-213-32/+10
| | | | | | | | | Update bison to 3.0.5 Bugfix release Remove 001-fix-macos-vasnprintf.patch as it is fixed upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> (cherry picked from commit df02e7a3c790552c9620242544ec0137dae6a32b)
* tools: findutils: fix compilation with glibc 2.28Luis Araneda2018-08-101-0/+104
| | | | | | | Add a temporary workaround to compile with glibc 2.28 as some constants were removed and others made private Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* tools: m4: fix compilation with glibc 2.28Luis Araneda2018-08-101-0/+118
| | | | | | | Add a temporary workaround to compile with glibc 2.28 as some constants were removed and others made private Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ar71xx: Add support for TP-Link CPE210 v2Adrian Schmutzler2018-06-231-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 5c5bf8b8658a588423f6ec445d7ef6a36f99a396)
* ar71xx: add support for TP-LINK Archer C7 v5Arvid E. Picciani2018-06-211-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org> (cherry picked from commit bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd)
* ipq806x: increase kernel partition size for the TP-Link Archer C2600Stefan Lippers-Hollmann2018-05-241-2/+7
| | | | | | | | | | | | | | | | | | | | The default image does not fit 2 MB anymore, expand os-image partition to 4 MB. Upgrading works transparently via sysupgrade in both directions. Another option would have been to merge "os-image" and "rootfs" into a single "firmware" partition using MTD_SPLIT_TPLINK_FW, but just changing the sizes of the existing partitioning has been deemed safer and actually tested on an affected device; the maximum for rootfs changes from 27 MB to 25 MB. Run-tested on TP-Link Archer C2600. Signed-off-by: Joris de Vries <joris@apptrician.nl> [slh: extend comments and commit message, rename rootfs] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit b72b36653a3fc8347456ab9c45d26a3144688a4c)
* tools: zlib: do not hardcode the install prefix in zlib.pcJo-Philipp Wich2018-05-241-0/+14
| | | | | | | | | | | | | | | | | | Our pkg-config wrapper relies on the ability to redefine the $prefix and $exec_prefix variables in order to construct proper search paths relative to the build environment. Patch the .pc file template to construct libdir, sharedlibdir and includedir relative to the ${prefix} variable so that it can be overridden as needed. This also fixes the libxml2/host build issue raised at https://github.com/openwrt/packages/issues/6073 - it was caused by libxml2's configure picking up a wrong host search path through zlib.pc, letting it include the wrong endian.h, causing spurious member redeclaration errors in system headers. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4da832e201da2493b66024f234a78a2249af4aff)
* tools/cmake: Update to 3.11.1Daniel Engberg2018-05-051-2/+2
| | | | | | Update cmake to 3.11.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/xz: Update to 5.2.4Daniel Engberg2018-05-051-10/+3
| | | | | | | | Update to 5.2.4 Remove FreeBSD fix as it's not needed Disable docs Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mm-macros: Update to 0.9.12Daniel Engberg2018-05-051-2/+2
| | | | | | Update mm-macros to 0.9.12 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/sed: Update to 4.5Daniel Engberg2018-05-051-2/+2
| | | | | | Update sed to 4.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* firmware-utils: add DNS-313 image header toolLinus Walleij2018-05-052-0/+240
| | | | | | | | This tool is used to create headers on images for the D-Link DNS-313 in gemini target. Will be used after switching gemini to 4.14 kernel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mtd-utils: add back macOS compatibility code that was dropped during the updateFelix Fietkau2018-04-301-0/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/make-ext4fs: Fix build on MacOSXHauke Mehrtens2018-04-291-2/+0
| | | | | | | | | | | MacOSX does not support "-Wl,-Bstatic" so do not force the static linking. We only copy the static libz library into the staging libraries directories, the linker will anyway only find the static version and link against that on all systems. Fixes: 8dcd941d8b9 ("tools/zlib: move zlib build to tools") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/libressl: update to version 2.7.2Hauke Mehrtens2018-04-284-3/+112
| | | | | | | Libressl version 2.7.0 and later implement more of the OpenSSL 1.1 API and this needs some modifications of the code using it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/mtd-utils: update to version 2.0.2Hauke Mehrtens2018-04-2811-303/+101
| | | | | | | | This version now uses autotools to configure the build system. They are also using the newly added zlib package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/mtd-utils: Mark some lzma functions as staticHauke Mehrtens2018-04-281-37/+37
| | | | | | | | | | | | | | | These functions are not declared in any header file and only used in same compile unit, mark them as static to remove one gcc warning and make it easier for the compiler to optimize them out. This also fixes some style problems to make this patch match the version in the packages folder. This is copied from this commit to the mtd-utils we pack into the image: 56d0dd56e9c6efa79 ("mtd-utils: Mark some lzma functions as static") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/zlib: move zlib build to toolsHauke Mehrtens2018-04-287-13/+76
| | | | | | | | | | | | | This allows us to link the other tools against our libz and we do not need the system zlib any more. Only the static linked library is copied to the staging directory so we have a statically linked library on all systems and not only on Linux. This also adds the new dependencies of the packages which are depending on zlib. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* firmware-utils: tplink-safeloader: increase RE350 kernel sizeAlex Maclean2018-04-231-3/+3
| | | | | | | | 4.14 increased kernel size, so grow the kernel partition by 128K to compensate. Fixes FS#1479. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* tools: mkimage: provide dtc path during buildJo-Philipp Wich2018-04-191-0/+1
| | | | | | | | | | | | | | | | | The new mkimage version requires a CONFIG_MKIMAGE_DTC_PATH variable to be provided during build, in order to hardcode a path to a suitable DT compiler executable. Failure to do so will result in stray "sh: 1: -I: not found" errors when invoking mkimage for FIT image generation. Fix the issue by supplying "dtc" as CONFIG_MKIMAGE_DTC_PATH value during build. As we intend our host utilities to be relocatable and since we're already overriding PATH when invoking mkimage, an absolute path is not required. Fixes: b13e981d72 ("tools/mkimage: update to version 2018.03") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools/mkimage: update to version 2018.03Hauke Mehrtens2018-04-1815-1071/+147
| | | | | | | | This activates support for fit images and some other new mkimage features. Some of the patches were applied upstream and could be removed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/mpfr: Update to 4.0.1Daniel Engberg2018-04-111-2/+2
| | | | | | Update mpfr to 4.0.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/cmake: Update to 3.11.0Daniel Engberg2018-04-116-22/+6
| | | | | | | | Update cmake to 3.11.0 Remove 110-alpine_musl-compat.patch as it's integrated upstream Rename and refresh patches Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: increase kernel partition size for CPE/WBS 210/510Matthias Schiffer2018-04-101-8/+8
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* firmware-utils: tplink-safeloader: move CPE/WBS 210/510 version metainfo to ↵Matthias Schiffer2018-04-101-20/+20
| | | | | | | | | the end Having the metainfo between kernel and rootfs prevents us from resizing the kernel partition as necessary. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add support for TP-Link Archer C60 v2Henryk Heisig2018-04-071-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* firmware-utils: image generator for D-Link DAP-1330Nicolò Veronese2018-04-052-0/+205
| | | | Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>