aboutsummaryrefslogtreecommitdiffstats
path: root/tools/firmware-utils
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: Add target TP-Link TD-W8980John Crispin2015-10-051-0/+5
| | | | | | | | | The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47130
* tools/firmware-utils: add header version 2 support for mktplinkfwJohn Crispin2015-08-171-4/+21
| | | | | | | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds header version 2 option for mktplinkfw. The version 2 header is used for AR/QCA firmwares and is not the same as the header generated by mktplinkfw2. Instead, it is nearly the same as version 1 header except for the header version and the RSA signature. The header version 2 support is used for newer TP-Link routers which have only a 64kb bootloader part, e.g. TL-WDR6500 v2. SVN-Revision: 46661
* firmware-utils mktplinkfw: print amount of exceeding bytesJohn Crispin2015-07-241-10/+11
| | | | | | | | This is very useful for trimming images towards 4 MiB flash size. Signed-off-by: Stephan Maka <stephan@spaceboyz.net> SVN-Revision: 46469
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+6
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> SVN-Revision: 46458
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-071-0/+1
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46236
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-0/+6
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46046
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-181-0/+6
| | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> SVN-Revision: 46044
* firmware-tools/ptgen: use stdint types for struct pteFelix Fietkau2015-06-141-7/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45957
* firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.Felix Fietkau2015-06-141-4/+4
| | | | | | | | They are of 32-bit little endian integers. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 45956
* tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimgJohn Crispin2015-06-031-7/+13
| | | | | | | | | | | | | | VGV7519 is currently the only device with brnboot support. It seems to be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to validate the checksum - it requires 0x04c11db7 instead. I have built an brnboot image manually on the command line, once with the old code and then with the new code but passing the old CRC32 poly value. Both resulted in a brnboot image with the same sha1sum. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 45881
* firmware-utils: asustrx: support setting firmware versionRafał Miłecki2015-05-271-2/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45791
* firmware-utils: asustrx: new tool for TRX format with Asus tailRafał Miłecki2015-05-272-0/+247
| | | | | | | | Asus devices use TRX format with some extra data at the end. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45773
* mktplinkfw: add flag to ignore size limit (used for initramfs images)Felix Fietkau2015-05-081-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45644
* brcm63xx: do not align squashfs rootfs startJonas Gorski2015-02-274-94/+124
| | | | | | | | | | | | | We do not need to align the start of read only rootfs's to erase blocks. This allows us to write the squashfs rootfs directly behind the kernel, potentially freeing up one erase block. We still need to align for jffs2, so add a flag for imagetag to optionally align the rootfs start. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44556
* firmware-utils: imagetag: use cyg_crc32 instead of duplicating codeJonas Gorski2015-02-272-47/+5
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44554
* ar71xx: TL-WA7210n v2 supportJohn Crispin2015-02-241-0/+6
| | | | | | | | | | This patch adds support for TP-Link TL-WA7210n[0] [0] http://www.tplink.com/en/products/details/?model=TL-WA7210N Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net> SVN-Revision: 44526
* tools: remove static linking supportJo-Philipp Wich2015-02-061-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44285
* ar71xx: Revert "added board support for compex wpj558"John Crispin2015-02-022-5/+0
| | | | | | | | This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44245
* added board support for compex wpj558John Crispin2015-02-022-0/+5
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 44237
* ar71xx: add support for TL-WA701ND v2John Crispin2015-01-201-0/+6
| | | | | | Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> SVN-Revision: 44063
* tools: edimax_fw_header: fix suspicious memset usageFlorian Fainelli2015-01-101-1/+1
| | | | | | | | | memset() was called with a size argument against a pointer size, not the structure size itself. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43913
* tools/firmware-utils: add version 3 header support for mktplinkfw2Felix Fietkau2015-01-091-9/+42
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43897
* buffalo-enc: pass the longstate option to decryptionFelix Fietkau2014-12-201-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43756
* buffalo-enc: accept the longstate command line optionFelix Fietkau2014-12-201-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43755
* Belkin AC 1750 DB (F9K1115v2) supportImre Kaloz2014-12-172-0/+387
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43734
* ramips: generate factory images for Nexx devicesJohn Crispin2014-12-071-9/+23
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 43541
* firmware-utils: remove dependency on error.h in tplink-safeloaderFelix Fietkau2014-11-271-1/+9
| | | | | | | | Fixes build on Mac OS X Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43402
* firmware-utils: add new tool tplink-safeloader for the new TP-LINK Pharos ↵John Crispin2014-11-262-0/+539
| | | | | | | | | | | | | | | | devices (CPE210/220/510/520) The new TP-LINK Pharos series uses a new bootloader, the "TP-LINK Safeloader". It uses an advanced firmware image format, containing an image partition table and a flash partition table (and image partitions are mapped to the corresponding flash partitions). The exact image format is documented in the source code. Furthermore, the bootloader expects the kernel image as an ELF executable. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 43384
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-291-0/+8
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* firmware-utils: rename encrypt()/decrypt() in mkhilinkfw to avoid collisionsFelix Fietkau2014-10-201-7/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42998
* firmware-utils: restore compilation of mkhilinkfw.John Crispin2014-10-201-2/+2
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42989
* firmware-utils: fix compilation warnings.John Crispin2014-10-202-6/+4
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42986
* firmware-utils: allow passing a specific MBR signature to ptgenJo-Philipp Wich2014-10-161-4/+15
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 42934
* firmware-utils: add NEXX factory image supportJohn Crispin2014-10-061-0/+16
| | | | | | | This patch adds support to encode and decode images for certain types of NEXX routers. SVN-Revision: 42784
* firmware-utils: made mkdir615h1 work for all Senao-produced devices as ↵John Crispin2014-08-032-38/+45
| | | | | | | | mksenaofw and cleaned up some of its formatting Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 41962
* firmware-utils: add new tool for fixing headers on ZyXEL devices (brcm63xx)Jonas Gorski2014-07-272-0/+260
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41849
* firmware-utils/mktplinkfw: add support for GL.iNet v1Gabor Juhos2014-07-131-0/+6
| | | | | | | | | | | | | Patch is based on http://patchwork.openwrt.org/patch/5273/. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: alzhao <alzhao@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5653/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41620
* firmware-utils/mkdir615h1: fix magic XOR calculationJohn Crispin2014-06-241-2/+2
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 41314
* lantiq: DGN3500 (all known variants) factory and sysupgrade image building ↵John Crispin2014-06-172-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | support This patch adds factory image building for the DGN3500, all variants, and fixes sysupgrade images to make them play nice with the sercomm secondary boot loader. The factory images can be used directly in the update dialog in the interface of the stock firmware and via the special Sercomm bootmode and a special windows flashing utility (allegedly present in the CD that came with the device -- but it's also compatible with the NSLU2 Upgrade_207_XP utility.) The special bootmode can be activated by turning the device on while holding the reset button pressed, then releasing it when the power led starts blinking red and green. Please notice that if using the 207 utility, it will always report that the flashing failed even though it completed successfully. Just power cycle the router manually after the utility reports the failure and OpenWRT will boot. This same utility (despite reporting failure in this case too) can revert a DGN3500 (any variant) to the appropriate stock Netgear firmware. This patch is a heavily modified version of a package I found on the OpenWRT forum with a couple fixes and features added -- mainly the generation of all the different image variants to support all known models directly, atm known variants are AnnexA-WW, AnnexA-NA and AnnexB-DE/GR. I tested the patch successfully on my device. Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 41236
* ramips: RT-N56U support fixes and factory image creationJohn Crispin2014-06-162-0/+295
| | | | | | Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> SVN-Revision: 41224
* firmware-utils: add Gemtek header toolJohn Crispin2014-04-222-0/+212
| | | | | | | | | Generates webflash-compatible images for a few RT2880 routers based on Gemtek OEM boards. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40551
* firmware-utils/mktplinkfw: add support for TL-WDR4300v1 (IL)Gabor Juhos2014-03-271-0/+6
| | | | | | | | | | | The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40037
* firmware-utils/mktplinkfw: add support for the Oolite v1 boardGabor Juhos2014-03-271-0/+6
| | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: fix whitespaces] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40035
* firmware-utils/mktplinkfw: add an option to generate 16MiB imagesGabor Juhos2014-03-271-0/+12
| | | | | | | | Signed-off-by: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org> Patchwork: http://patchwork.openwrt.org/patch/2449/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40034
* firmware-utils/mktplinkfw: allow to reserve space in the generated imagesGabor Juhos2014-01-251-4/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39396
* ralink: don't build mkhilinkfw untilt he ssl header dependency is resolvedJohn Crispin2014-01-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39248
* firmware-utils: mkhilinkfw breaks the build botsJohn Crispin2014-01-121-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39243
* firmware-utils: add HLK-RM04 toolJohn Crispin2014-01-122-0/+321
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39238
* firmware-utils: check_magic() in buffalo-lib.c always return 0John Crispin2013-12-271-2/+2
| | | | | | | | spotted with cppcheck Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> SVN-Revision: 39171
* firmware-utils/mkplinkfw: add TL-WA801ND v2 supportGabor Juhos2013-12-151-0/+6
| | | | | | | | Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4503/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39066
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 02:07:11 +0000