aboutsummaryrefslogtreecommitdiffstats
path: root/tools/firmware-utils
Commit message (Collapse)AuthorAgeFilesLines
* firmware-utils: mksenaofw: rework option validationMathias Kresin2016-08-171-19/+22
| | | | | | | The options firmware_type, vendor_id and product_id are not required for decoding an image file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: mktplinkfw: add support for TP-Link's new region codesMatthias Schiffer2016-08-281-32/+37
| | | | | | | | | TP-Link has changed the way the region is stored in the firmware header, and now provides US- and EU-specific images for the Archer C7. Adding the new region codes is necessary to make LEDE/OpenWrt flashable on devices with the new stock firmwares again. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* apm821xx: add support for the Cisco Meraki MR24Chris Blake2016-07-221-0/+10
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* firmware-utils: oseama: support extracting entityRafał Miłecki2016-06-151-0/+134
| | | | | | | This updates oseama in firmware-utils to the version from packages keeping them synced. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* tools/mkfwimage2: remove 256 length limit for partition imagesAlexander Couzens2016-06-141-1/+5
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* tools/firmware-utils: Add Archer C50 to mktplinkfw2Henryk Heisig2016-06-131-0/+7
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-072-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/tplink-safeloader: split CPE210 from CPE510 profileAlexander Couzens2016-05-271-10/+23
| | | | | | | | | The CPE210 was still described for the OEM upgrade as compatible, even the wireless configuration isn't compatible anymore between both series (2ghz and 5ghz). Update the CPE210 image profile to use the new profile. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* fw-utils/tplink-safeloader.c: Add support for Archer C2600Ash Benz2016-05-271-3/+111
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* tools/firmware-utils: remove obsolete firmware utility for airlink 525wFelix Fietkau2016-05-122-333/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: firmware-utils: add region code support to mktplinkfwJohn Crispin2016-04-211-5/+46
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49215
* tools: firmware-utils: clean up mktplinkfwJohn Crispin2016-04-212-435/+35
| | | | | | | | | | | | | Remove the whole board list from mktplinkfw, as OpenWrt doesn't use it and it was severely out of sync with the list of built images for ar71xx. Also: * fix -Wall warnings * add const where appropriate Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49214
* ar71xx: add TP-Link TL-WA901ND-v4 supportJohn Crispin2016-04-091-0/+6
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 49158
* ar71xx: Add support for the OMYlink OMY-X1John Crispin2016-03-161-0/+6
| | | | | | | | | | | | This patch adds support for the OMYlink OMY-X1 https://wiki.openwrt.org/toh/omylink/omy-x1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 49026
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-041-209/+220
| | | | | | | | replace spaces with tabs Signed-off-by: Reinhard Max <reinhard@m4x.de> SVN-Revision: 48901
* ramips: Add a tool to create JCG factory imagesJohn Crispin2016-03-032-0/+393
| | | | | | | | | | This tool creates factory images for JCG routers. Details can be found in the header comment of jcgimage.c. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48888
* firmware-utils: mkfwimage: fix firmware_max_length for XM layoutFelix Fietkau2016-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new u-boot version bundled with the 5.6.x firmwares from Ubiquiti gets confused by the smaller rootfs partition size; this can lead to various issues: 1. We've gotten reports that flashing from the 5.6.x stock firmware to OpenWrt will brick devices; I wasn't able to reproduce this myself 2. Flashing from 5.5.x stock firmware to OpenWrt and back to stock (via TFTP recovery), following by an update to 5.6.x via web interface can yield a bricked device with the following properties: - It can't be booted without entering commands over a serial console, as u-boot supplies the wrong MTD layout - The web interface won't accept any image with the original flash layout, so stock firmware upgrades are impossible - As the TFTP recovery doesn't update u-boot, returning to the old u-boot from firmware 5.5.x is impossible To recover from 2., creating an OpenWrt image which doesn't set u-boot as read-only and flashing a backup of the old u-boot from there is the only way known to me. (Fixing the mtdparts variable in u-boot-env from OpenWrt might also work; settings this from u-boot over serial didn't have any permanent effect.) Fix all of this by setting the correct flash layout also used by the stock firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The fixed layout also matches the mtdparts defined by OpenWrt. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48829
* ar71xx, firmware-utils: split ubdev01 flash layout from XMFelix Fietkau2016-02-291-0/+6
| | | | | | | | | The ubdev01 profile defines its own MTDPARTS with smaller firmware partition, so give it its own UBNT_BOARD in mkfwimage. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48828
* firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warningsFelix Fietkau2016-02-292-8/+6
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 48827
* ar71xx: Added support for TL-WA801NDv3John Crispin2016-02-121-1/+6
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 48705
* firmware-utils: add oseama tool for creating Seama entitiesRafał Miłecki2016-02-012-0/+423
| | | | | | | | | | | | | It has an important feature (compared to seama) of using multiple input files, aligning them and padding zeroes until reaching a specified absolute offset. This is needed for a proper flash layout on NAND. We want kernel partition to be big enough to handle future updates without a need to resize it and wipe whole "ubi" partition. It's important as we don't want to lose block counters. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48601
* lantiq: add support for TP-Link VR200vHauke Mehrtens2016-01-181-0/+12
| | | | | | | | | This adds basic support for TP-Link VR200v. Currently the following parts are not working: FXO, Voice, DECT, WIFI (both) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48328
* firmware-utils: allow mkfwimage2 to use - in partition namesJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47975
* firmware-utils: fix various compiler warningsJohn Crispin2015-12-117-2/+8
| | | | | | | | | mostly implicit defines due to missing includes plus one const that shouldn't be one. Signed-off-by: Felix Kaechele <felix@kaechele.ca> SVN-Revision: 47865
* mktplinkfw: add missing exceeding bytes info to logsJohn Crispin2015-12-111-2/+2
| | | | | | | | Add the info on exceeding bytes also to the remaining log messages. Signed-off-by: Felix Kaechele <felix@kaechele.ca> SVN-Revision: 47864
* firmware-utils mkmerakifw: firmware generator for MR18John Crispin2015-12-112-0/+264
| | | | | | | | This patch adds firmware generation tool for Cisco's MR18 Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> SVN-Revision: 47856
* brcm63xx: work around boot failures with squashfs on BCM6368Jonas Gorski2015-11-041-0/+2
| | | | | | | | | | | Due to the LWL/LWR SMP issue on BCM6368, booting with squash might fail if the rootfs is not word aligned. As a quick fix, work around it by ensuring this condition is always true. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47380
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-191-2/+7
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Other corrections such as the Machine Name and HWIDs v2 corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 47221
* tools/firmware-utils: tplink-safeloader: add version 1.1 support to ↵John Crispin2015-10-191-4/+4
| | | | | | | | | | | | | | CPE210/220/510/520 The hardware is identical to version 1.0, add the new models to the support list. Also remove the empty line at the end of the support list, the current stock images don't have it either. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47212
* tools/firmware-utils: tplink-safeloader: fix support-list format, clean up ↵John Crispin2015-10-191-17/+30
| | | | | | | | | | | vendor information The first 4 bytes of the support list and the vendor information are supposed to contain the length of these fields. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47211
* tools/firmware-utils: tplink-safeloader: clean up codeJohn Crispin2015-10-191-11/+11
| | | | | | | | There is no reason for the internal functions not to be static. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47210
* firmware-utils/buffalo-enc: explicitly use signed char for checksum functionFelix Fietkau2015-10-121-1/+1
| | | | | | | | | ARM defaults to unsigned char and that breaks the calculation, as it relies on sign extension Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47186
* firmware-utils/buffalo-enc: add support for decrypting data with an offsetFelix Fietkau2015-10-121-3/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47185
* tools: firmware-utils: fix compiler warningsHauke Mehrtens2015-10-1115-29/+31
| | | | | | | | This just fixes a lot of compiler warnings. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47181
* lantiq: Add target TP-Link TD-W8980John Crispin2015-10-051-0/+5
| | | | | | | | | The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47130
* tools/firmware-utils: add header version 2 support for mktplinkfwJohn Crispin2015-08-171-4/+21
| | | | | | | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds header version 2 option for mktplinkfw. The version 2 header is used for AR/QCA firmwares and is not the same as the header generated by mktplinkfw2. Instead, it is nearly the same as version 1 header except for the header version and the RSA signature. The header version 2 support is used for newer TP-Link routers which have only a 64kb bootloader part, e.g. TL-WDR6500 v2. SVN-Revision: 46661
* firmware-utils mktplinkfw: print amount of exceeding bytesJohn Crispin2015-07-241-10/+11
| | | | | | | | This is very useful for trimming images towards 4 MiB flash size. Signed-off-by: Stephan Maka <stephan@spaceboyz.net> SVN-Revision: 46469
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+6
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> SVN-Revision: 46458
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-071-0/+1
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46236
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-0/+6
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46046
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-181-0/+6
| | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> SVN-Revision: 46044
* firmware-tools/ptgen: use stdint types for struct pteFelix Fietkau2015-06-141-7/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45957
* firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.Felix Fietkau2015-06-141-4/+4
| | | | | | | | They are of 32-bit little endian integers. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 45956
* tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimgJohn Crispin2015-06-031-7/+13
| | | | | | | | | | | | | | VGV7519 is currently the only device with brnboot support. It seems to be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to validate the checksum - it requires 0x04c11db7 instead. I have built an brnboot image manually on the command line, once with the old code and then with the new code but passing the old CRC32 poly value. Both resulted in a brnboot image with the same sha1sum. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 45881
* firmware-utils: asustrx: support setting firmware versionRafał Miłecki2015-05-271-2/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45791
* firmware-utils: asustrx: new tool for TRX format with Asus tailRafał Miłecki2015-05-272-0/+247
| | | | | | | | Asus devices use TRX format with some extra data at the end. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45773
* mktplinkfw: add flag to ignore size limit (used for initramfs images)Felix Fietkau2015-05-081-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45644
* brcm63xx: do not align squashfs rootfs startJonas Gorski2015-02-274-94/+124
| | | | | | | | | | | | | We do not need to align the start of read only rootfs's to erase blocks. This allows us to write the squashfs rootfs directly behind the kernel, potentially freeing up one erase block. We still need to align for jffs2, so add a flag for imagetag to optionally align the rootfs start. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44556
* firmware-utils: imagetag: use cyg_crc32 instead of duplicating codeJonas Gorski2015-02-272-47/+5
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44554
* ar71xx: TL-WA7210n v2 supportJohn Crispin2015-02-241-0/+6
| | | | | | | | | | This patch adds support for TP-Link TL-WA7210n[0] [0] http://www.tplink.com/en/products/details/?model=TL-WA7210N Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net> SVN-Revision: 44526
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 21:10:20 +0000