aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* b53: Make b53_switch_init staticJonas Gorski2014-02-221-1/+1
| | | | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4869/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39683
* b53: Add BCM53128 switch supportJonas Gorski2014-02-223-2/+18
| | | | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4867/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39682
* brcm63xx: fix RG100A/DB120 usb port numberJonas Gorski2014-02-2251-75/+85
| | | | | | | | Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39681
* brcm63xx: fix number of usb ports for HW556 variantsJonas Gorski2014-02-2211-18/+21
| | | | | | | | Don't only fix up the fallback board, but also all three variants. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39680
* brcm63xx: add initial support for BCM963268BU_P300 reference boardJonas Gorski2014-02-223-2/+150
| | | | | | | | | Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39679
* brcm63xx: add VW6339GU supportJonas Gorski2014-02-223-2/+128
| | | | | | | | | Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39678
* brcm63xx: fix number of switch ports for BCM63168/63268Jonas Gorski2014-02-222-6/+10
| | | | | | | | | | | BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268 has two additional RGMII ports, making it 8. Fix this by checking the chip variant and applying an appropriate limit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39677
* brcm63xx: F@ST2504n board support (image, base-files)Jonas Gorski2014-02-223-0/+9
| | | | | | | | Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39676
* brcm63xx: F@ST2504n board supportJonas Gorski2014-02-226-7/+120
| | | | | | | | Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4729/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39675
* brcm63xx: add support for Asmax AR 1004g routerJonas Gorski2014-02-225-2/+79
| | | | | | | | | | Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39674
* brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-222-0/+19
| | | | | | | | | | | | | This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39673
* brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-223-1/+26
| | | | | | | | | | This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39672
* brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-229-14/+159
| | | | | | | | | | | | | This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39671
* imx6: update Ventana dtsLuka Perkov2014-02-2020-1702/+1827
| | | | | | | | | | | Update the Ventana device-tree to match upstream: - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx - align pinctrl with upstream - consolidate multiple patches into one Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39644
* imx6: enable IMX6 watchdogLuka Perkov2014-02-202-2/+2
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39643
* ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossGabor Juhos2014-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | When the RB91x device uses a GbE link the connection suffers from packet loss: root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 20 packets transmitted, 9 packets received, 55% packet loss round-trip min/avg/max = 4.570/4.815/4.999 ms Using a different PLL value fixes the issue. root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 4.449/5.413/13.870 ms Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39642
* ar71xx: Add support for MikroTik RB951Ui-2HnDGabor Juhos2014-02-202-4/+85
| | | | | | | | | | | | | | | | | | | | | | | | I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39641
* kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP casesGabor Juhos2014-02-203-0/+74
| | | | | | | | | | | | | This is a backport of code to improve the quality of fq_codel hashing for 3.10 for some encapsulated protocols. Not needed in 3.11 and later. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4902/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39640
* imx6: drop upstream rejected patchLuka Perkov2014-02-202-76/+0
| | | | | | | | http://article.gmane.org/gmane.linux.drivers.i2c/17891 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39639
* ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-192-0/+12
| | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39637
* ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-195-2/+12
| | | | | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4849/ [juhosg: - use the Archer C7 specific LED setup instead of adding identical code] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39636
* ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-192-4/+50
| | | | | | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4848/ [juhosg: - rename and refresh kernel patch, - merge the board setup code into mach-archer-c7.c and drop mach-tl-wdr49000-v2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39635
* sunxi: move a lost CONFIG_CHARGER symbol to genericNicolas Thill2014-02-192-1/+1
| | | | SVN-Revision: 39634
* target/sunxi: make REGMAP built-in (used by REGULATOR)Nicolas Thill2014-02-181-0/+1
| | | | SVN-Revision: 39633
* target/uml: update READMENicolas Thill2014-02-181-1/+1
| | | | | | invoking uml is now simplier, not need to setup console & serial SVN-Revision: 39632
* kernel: refresh configs with kconfig.plGabor Juhos2014-02-183-8/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39627
* ar71xx: fix unaligned access hacks for tcp timestampsGabor Juhos2014-02-181-1/+2
| | | | | | | | | | | | This missing bit of the hack saves hugely on instruction traps on tcp connections to ar71xx based routers. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4905/ [juhosg: adjust subject, refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39626
* ar71xx: WNR2200: fix mounting root fs problemGabor Juhos2014-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Solves ticket #14356 <https://dev.openwrt.org/ticket/14356> Without this patch, UART output will show only 4 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000050000 : "u-boot" [ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env" [ 0.770000] 0x000000070000-0x0000007f0000 : "firmware" [ 0.790000] 0x0000007f0000-0x000000800000 : "art" and then linux complains :VFS: Cannot open root device "(null)" With this patch, UART out will show 7 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000040000 : "u-boot" [ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.770000] 0x000000050000-0x0000007f0000 : "firmware" [ 0.780000] 2 netgear-fw partitions found on MTD device firmware [ 0.780000] 0x000000050000-0x00000014b440 : "kernel" [ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs" [ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.820000] mtd: device 4 (rootfs) set to be root filesystem [ 0.830000] 1 squashfs-split partitions found on MTD device rootfs [ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data" [ 0.840000] 0x0000007f0000-0x000000800000 : "art" This patch is tested against r39502 of trunk. Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw> Patchwork: http://patchwork.openwrt.org/patch/4870/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39625
* ralink: add support for na930John Crispin2014-02-187-1/+181
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39611
* ralink: add gpio_uartf mux groupJohn Crispin2014-02-181-0/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39610
* ralink: fix the gpio mode mappingJohn Crispin2014-02-181-0/+35
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39609
* 3.13: revert r39601 as the symbol is already thereZoltan Herpai2014-02-171-1/+0
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39602
* 3.13: add missing NF_TABLES symbol - until someone packages itZoltan Herpai2014-02-171-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39601
* 3.13: add missing symbolZoltan Herpai2014-02-171-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39600
* kirkwood: dockstar: remove sata from packagesLuka Perkov2014-02-161-1/+0
| | | | | | | | The dockstar doesn't have any sata ports. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39596
* kirkwood: add support for Seagate GoFlexNetLuka Perkov2014-02-162-0/+20
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39595
* kirkwood: update support for dockstarLuka Perkov2014-02-152-3/+35
| | | | | | | | | | | | | | | | The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Alexander Couzens <lynxis@fe80.eu> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39593
* kirkwood: update support for ib62x0Luka Perkov2014-02-151-11/+15
| | | | | | | | | | | | | | | | The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39592
* kirkwood: update support for iconnectLuka Perkov2014-02-154-19/+62
| | | | | | | | | | | | | | | | | | Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39591
* kernel: rtl8306: update reset functionLuka Perkov2014-02-151-7/+2
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 39589
* lantiq: fix typo in pinctl driverLuka Perkov2014-02-151-0/+32
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 39588
* lantiq: fix PCI problems on ARV4510PWLuka Perkov2014-02-151-1/+5
| | | | | | | | | Some ARV4510PW units seem to have unstable PCI due to missing pull-up resistors. This patch makes sure that the GPIO lines are driven properly. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 39587
* use the default package setImre Kaloz2014-02-141-2/+0
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39584
* ar71xx: fix mtdpartsize macro in image Makefile (#14961)Jo-Philipp Wich2014-02-131-1/+1
| | | | | | | | | | | | | The mtdpartsize macro triggers shell errors on various Linux distributions when the partname argument $(1) does not appear within the partmap $(2). Change the sed pattern to only emit anything if a successful substitution occured and only evaluate the arithmetic expression if something was printed by the sed program. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 39583
* upgrade 3.13 targets to 3.13.2, refresh patchesImre Kaloz2014-02-13107-805/+203
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org SVN-Revision: 39582
* upgrade 3.12 to 3.12.10Imre Kaloz2014-02-1312-147/+164
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39581
* change image generation logicImre Kaloz2014-02-131-8/+8
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39580
* handle some CONFIG_TARGET_ROOTFS_INCLUDE_ fooImre Kaloz2014-02-121-1/+12
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39578
* copy initramfs zImage to the bin dir as wellImre Kaloz2014-02-121-1/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39577
* generate ubifs imagesImre Kaloz2014-02-123-1/+18
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39576
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 01:22:08 +0000