aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ath79: create Aruba AP-105 APBoot compatible imageDavid Bauer2023-04-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alter the Aruba AP-105 image generation process so OpenWrt can be loaded with the vendor Aruba APBoot. This works by prepending the OpenWrt LZMA loader to the uImage and jumping directly to the loader. Aruba does not offer bootm on these boards. This approach keeps compatibility to devices which had their U-Boot replaced. Both bootloaders can boot the same image. The same modification is most likely also possible for the Aruba AP-175. With this patch, new installations do not require replacing the bootloader and can be performed from the serial console without opening the case. Installation ------------ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv apb_rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x84000000 ap105.bin; go 0x84000040" $ setenv apb_fb_openwrt "cp.b 0xbf040000 0x84000000 0x10000; go 0x84000040" $ setenv bootcmd "run apb_fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run apb_rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit e11d00d44c66b1534fbc399fda55951cd0a2168a)
* kernel: backport fix for recently introduced UBI bugDaniel Golle2023-04-152-2/+71
| | | | | | | | | | Import commit "ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size" which did not yet make it to stable upstream Linux trees. Fixes: #12232 Fixes: #12339 Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit aad34818b50029e07ed9221ae46f9770d6e29785)
* imagebuilder: allow to specific ROOTFS_PARTSIZEPaul Spooren2023-04-091-1/+3
| | | | | | | | | | | | Setting this options modifies the rootfs size of created images. When installing a large number of packages it may become necessary to increase the size to have enough storage. This option is only useful for supported devices, i.e. with an attached SD Card or installed on a hard drive. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 7b7edd25a571568438c886529d3443054e02f55f)
* ramips: define remapping-range for DAP-X1860David Bauer2023-04-081-0/+7
| | | | | | | | | | Prevent the BBT translation layer from remapping the UBI used for storing rootfs. Explicitly define the number of blocks reserved for remapping. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 076da59f17803e9412ef5e50988aff6c7e536292)
* ramips: add support for D-Link DAP-X1860 A1Sebastian Schaper2023-04-086-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> (cherry picked from commit 3c31f6b521bb5fc49e222a8f2bcd454b73452a0e)
* ramips: lower re305-v3 spi-max-frequencyJoe Mullally2023-04-081-1/+1
| | | | | | | | | | | | | | Fix flash I/O instability observed in newer devices with cFeon QH64A-104HIP (detected as en25qh64). Ref: https://forum.openwrt.org/t/support-for-tp-link-re305-v3/75893/91 Reported-by: Dimitri Souza <dimitri.souza@gmail.com> Tested-by: Dimitri Souza <dimitri.souza@gmail.com> Signed-off-by: Joe Mullally <jwmullally@gmail.com> [alter commit-message - target master] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 2122c80b321d439cf8b669ae26fcfeec605cf2cc)
* lantiq: fix lzma-loader for Netgear DGN 3500(B)Maik Goette2023-04-022-5/+18
| | | | | | | | Fixes Uncompressing Kernel Image ... ERROR: LzmaDecode.c, 561 Fixes: #11701 for both 3500(B) Signed-off-by: Maik Goette <github@beeit.de> (cherry picked from commit 4d9c38d654fdfb72ef641573bbf5b0f73f638f2e)
* ath79: tiny: Do not build TPLink WPA8630Pv2 by defaultJoe Mullally2023-04-021-0/+1
| | | | | | | | | | | 22.03.1+ and snapshot builds no longer fit the 6M flash space available for these models. This disables failing buildbot image builds for these devices. Images can still be built manually with ImageBuilder. Signed-off-by: Joe Mullally <jwmullally@gmail.com> (cherry picked from commit 4965cbd259bb9001e8724f53520f4be1e4723212)
* ramips: mt7621: mikrotik 760igs (hEX S) fix SFPJohn Thomson2023-04-021-0/+1
| | | | | | | | | | | | | | This device uses an AR8031/AR8033 chip to convert SoC gmac1 RGMII to 1000base-x or sgmii for the SFP fibre cage. The SFP cage requires phy-mode rgmii-rxid, and without it will not recieve any packets: ethtool -S sfp rx_fcs_errors will increase when packets should be being received, but no other _rx counters will change. Fixes: c77858aa792 ("ramips: mt7621-dts: change phy-mode of gmac1 to rgmii") Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit 7ea965b57803ceec20222279377e611652ac217f)
* ath79: use lzma-loader for Senao initramfs imagesMichael Pratt2023-04-021-0/+1
| | | | | | | | | | Some vendors of Senao boards have put a bootloader that cannot handle both large gzip or large lzma files. There is no disadvantage by doing this for all of them. Signed-off-by: Michael Pratt <mcpratt@pm.me> (cherry picked from commit 8342c092a03caedbf160d4ac3982c6a9be91261f)
* ath79: Fix glinet ar300m usb not workingLuo Chongjun2023-04-022-13/+8
| | | | | | | | | | | | | | | | | | | glinet forum users reported the problem at https://forum.gl-inet.com/t/gl-ar300m16-openwrt-22-03-0-rc5-usb-port-power-off-by-default/23199 The current code uses the regulator framework to control the USB power supply. Although usb0 described in DTS refers to the regulator by vbus-supply, but there is no code related to regulator implemented in the USB driver of QCA953X, so the USB of the device cannot work. Under the regulator framework, adding the regulator-always-on attribute fixes this problem, but it means that USB power will not be able to be turned off. Since we need to control the USB power supply in user space, I didn't find any other better way under the regulator framework of Linux, so I directly export gpio. Signed-off-by: Luo Chongjun <luochongjun@gl-inet.com> (cherry picked from commit b352124cd2115fec648a00956a848660df9477d3)
* ramips: rt5350: enable lzma-loader for ALLNET ALL5003Sergio Paracuellos2023-04-021-0/+1
| | | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> (cherry picked from commit 84c04ff4069a652755267d126418b211379c1cbf)
* sdk: expose PATENTED an NLS build optionsTomasz Maciej Nowak2023-04-021-0/+17
| | | | | | | | | | Some packages offer functionalities guarded by these options and it'll be impossible to reach them without changing Config-build.in. So allow to toggle these in more friendly way, by exposing them in configuration menu. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit 477ff0821a5e532adc0861d4093029967f5e1178)
* kernel: filter out pahole versionRobert Marko2023-04-021-0/+1
| | | | | | | | | Pahole version is being autodetected during runtime since kernel 5.15.96 via in-kernel scripts/pahole-version.sh so add CONFIG_PAHOLE_VERSION to kernel filter in order to prevent it from being added to target configs. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 5d8f14bfefc6f12e93425ee522bdce75a7c979d6)
* lantiq: nand: don't yield while holding spinlockThomas Nixon2023-04-021-0/+38
| | | | | | | | | | | | | | | | | | | | The nand driver normally while waiting for the device to become ready; this is normally fine, but xway_nand holds the ebu_lock spinlock, and this can cause lockups if other threads which use ebu_lock are interleaved. Fix this by waiting instead of polling. This mainly showed up as crashes in ath9k_pci_owl_loader (see https://github.com/openwrt/openwrt/issues/9829 ), but turning on spinlock debugging shows this happening in other places too. This doesn't seem to measurably impact boot time. Tested on bt_homehub-v5a with 5.10 and 5.15. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> [Add commit description into patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d3b47909b199b876f67a0387b5545cb73bd6b815)
* ramips: mt7621: ASUS RT-AX53U add NMBM, nest firmwareFelix Baumann2023-04-021-7/+26
| | | | | | | | | | | | | Nests kernel and ubi into firmware partition in-order to be compatible with OEM firmware. This allows restoring oem firmware from a backup of firmware2. Add jffs2 partition which is present in the oem firmware. Add support for mediatek NMBM (wear leveling on newer mediatek devices). Exclude UBI partition from NMBM management. Continues PR #10685. Tested-by: Felix Baumann <felix.bau@gmx.de> Signed-off-by: Felix Baumann <felix.bau@gmx.de> (cherry picked from commit 787ecdf66de6798540fb8b756404566341b4733c)
* ramips: Alternative name Asus RT-AX1800U for Asus RT-AX53UFelix Baumann2023-04-021-0/+2
| | | | | | | | | The Asus RT-AX1800U is identical to the already supported Asus RT-AX53U. Use the ALT0 buildroot tags to show both devices. Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Felix Baumann <felix.bau@gmx.de> (cherry picked from commit acd3b5e83b99879b326a940907a9ff334586f86b)
* ramips: add missing LEDs to Asus RT-AX53UMarian Sarcinschi2023-04-023-3/+19
| | | | | | | | | | | | | | | | | This patch adds the missing LEDs to Asus RT-AX53U. Based on PR #10400 and patch provided in #11068 - enable the two LEDs controlled by mt7915e for wireless; - add label to power LED so it works properly and fix formatting; - add the USB LED; - switch LEDs are best left to be controlled by hardware for now. Co-Authored-By: Ivan Rozhuk <rozhuk.im@gmail.com> Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Co-Authored-By: Hartmut Birr <e9hack@gmail.com> Tested-by: Felix Baumann <felix.bau@gmx.de> Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Marian Sarcinschi <znevna@gmail.com> (cherry picked from commit c4b806d5c4ccc653968620e6e9aec93bc4e370e5)
* ramips: add support for read/write uboot env to Asus RX-AX53UFelix Baumann2023-04-021-2/+11
| | | | | | | | | | | | | | | | | | | Add support for read/writing uboot env by renaming the second partition to its stock label "nvram" and remove the deemed unnecessary "read-only". Split the first partition "u-boot" in two, in order to allow `fw_setenv` safe write-access to the uboot environment variables. This implements hauke's request from [1]. Based on the patch provided by Shiji Yang. [1] https://github.com/openwrt/openwrt/pull/10400#discussion_r945153224 Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Felix Baumann <felix.bau@gmx.de> [ improve commit title and description, fix some whitespace problem ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 3f1e9f6f3b14385cab7ca6d1dcc2a4b658475bc3)
* kernel: add support for XMC XM25QH64CJoe Mullally2023-04-011-0/+22
| | | | | | | | The XMC XM25QH64C is a 8MB SPI NOR chip. The patch is verified on TL-WPA8631P v3. Datasheet available at https://www.xmcwh.com/uploads/442/XM25QH64C.pdf Signed-off-by: Joe Mullally <jwmullally@gmail.com> (cherry picked from commit 19752bdfa3e75da8290f525186e9fd8349df9c93)
* ath79: Refresh patchesHauke Mehrtens2023-04-011-1/+1
| | | | | | | Refresh the kernel patches. Fixes: c2331038b257 ("kernel: remove obsolete netfilter tcp window size check bypass patch") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove obsolete netfilter tcp window size check bypass patchFelix Fietkau2023-03-301-73/+0
| | | | | | | | On any currently supported hardware, the performance impact should not matter anymore. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 75e78bcaab847557ce1782eb2dea9dff9a029171)
* kernel: bump 5.10 to 5.10.176John Audia2023-03-2717-34/+34
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit f598880162e83ddc0139e00c5248497d06f5fff7)
* kernel: bump 5.10 to 5.10.175John Audia2023-03-2742-140/+140
| | | | | | | | | | Manually rebased: backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 3ca98495897126113912f7ee4537f69459d21332)
* kernel: bump 5.10 to 5.10.173John Audia2023-03-27103-344/+287
| | | | | | | | | | Manually rebased: ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit d4aad642ff80750ec16a58058eb6da718e2129cd)
* kernel: tcindex classifier has been retiredJohn Audia2023-03-271-1/+0
| | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.10.173&id=18c3fa7a7fdbb4d21dafc8a7710ae2c1680930f6 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit fbfec3286e8bfce3a78749b7bcb67e658665f197)
* x86: fix deprecated CONFIG_MICROCODE_OLD_INTERACEJohn Audia2023-03-271-1/+1
| | | | | | | | | | | | We use late loading[1] so need to set this option despite upstream adding a kernel taint when this option is set. See discussion in PR#12149 for more details. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.10.173&id2=v5.10.172 1. https://github.com/openwrt/openwrt/blob/master/target/linux/x86/base-files/lib/preinit/02_load_x86_ucode Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 0c5ffe1ab2b4843635555e2a234f8bd5cb4d6978)
* kernel: bump 5.10 to 5.10.172John Audia2023-03-273-100/+2
| | | | | | | | | | | | Removed upstreamed: backport-5.10/804-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.171&id=3e4bbd1f38a8d35bd2d3aaffdb5f6ada546b669a Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 50cb897d251133752ea2cd338153a6dcb011ea98)
* kernel: bump 5.10 to 5.10.169John Audia2023-03-276-9/+107
| | | | | | | | | | | | Add fix: target/linux/generic/backport-5.10/804-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[3] All other patches automatically rebased. 3. https://lore.kernel.org/stable/20230227211548.13923-1-kuniyu@amazon.com Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b88955aa2294c61f21bdf7014e10d8ea29d0c346)
* bcm4908: include usbport triggerRafał Miłecki2023-03-271-1/+2
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit cb2661844a5d54d44230ee564d4f17605a794a49)
* bcm4908: backport v6.4 pending DTS changesRafał Miłecki2023-03-279-1/+791
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ffaabee9b8d9da7c15a50f52897ae5f70b40b4e7)
* ipq40xx: Linksys MR8300: fix the USB port powerDaniel González Cabanelas2023-03-271-1/+11
| | | | | | | | | | | | | | | | The USB port on the MR8300 randomly fails to feed bus-powered devices. This is caused by a misconfigured pinmux. The GPIO68 should be used to enable the USB power (active low), but it's inside the NAND pinmux. This GPIO pin was found in the original firmware at a startup script in both MR8300 and EA8300. Therefore apply the fix for both boards. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit ed64c3323590e3c9fa8b423bf37689023a7a101f) Signed-off-by: Steffen Scheib <steffen@scheib.me>
* ramips: mt7621: enable lzma-loader for AFOUNDRY EW1200Tony Butler2023-03-261-0/+1
| | | | | | | | | | Fixes boot loader LZMA decompression issues (LZMA ERROR 1) As reported in issue #12208 Reported-by: Raúl M. <raul.m@sparkedhost.com> Tested-by: Raúl M. <raul.m@sparkedhost.com> Signed-off-by: Tony Butler <spudz76@gmail.com> (cherry picked from commit 889bbf89bb679f0c5b0fa432e27a3e0dd8940a4e)
* ramips: fix 5g mac for TOTOLINK X5000RChuanhong Guo2023-03-271-0/+4
| | | | | | | | | | There's no valid mac address for the second band in the eeprom. The vendor fw uses 2.4G mac + 4 as the mac for 5G radio. Do the same in our firmware. Fixes: 23be410b3d ("ramips: add support for TOTOLINK X5000R") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit 212632540043cc9b911c2efb86156479f2710836)
* ramips: add support for Mercusys MR70XDavid Bauer2023-03-243-4/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== - SoC: MediaTek MT7621AT (880MHz, Duel-Core) - RAM: DDR3 128MB - Flash: Winbond W25Q128JV (SPI-NOR 16MB) - WiFi: MediaTek MT7915D (2.4GHz, 5GHz, DBDC) - Ethernet: MediaTek MT7530 (WAN x1, LAN x3, SoC) - UART: >TX RX GND 3v3 (115200 8N1, J1) Do not connect 3v3. TX is marked with an arrow. Installation ============ Flash factory image. This can be done using stock web ui. Revert to stock firmware ======================== Flash stock firmware via OEM Web UI Recovery mode. Web UI Recovery method ====================== 1. Unplug the router 2. Plug in and hold reset button 5~10 secs 3. Set your computer IP address manually to 192.168.1.x / 255.255.255.0 4. Flash image with web browser to 192.168.1.1 Co-authored-by: Robert Senderek <robert.senderek@10g.pl> Co-authored-by: Yoonji Park <koreapyj@dcmys.kr> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 47de2c686291e69afc9f443e27e1dfd11ed5fbe7)
* ramips: fix Archer AX23 WiFi MAC address conflictDavid Bauer2023-03-211-4/+1
| | | | | | | | | | | The original claim about conflicting MAC addresses is wrong. mac80211 does increment the first octet and sets the LA bit. This means our "workaround" actually leads to the issue while incrementing the last octet is safe. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit d52870125d57d39e73e6c305dd36fad44fe4a773)
* ramips: add support for TP-Link Archer AX23 v1David Bauer2023-03-214-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: MediaTek MT7621 DAT RAM: 128MB DDR3 (integrated) FLASH: 16MB SPI-NOR () WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax SERIAL: 115200 8N1 LEDs - (3V3 - GND - RX - TX) - ETH ports Installation ------------ Upload the factory image using the Web-UI. Web-Recovery ------------ The router supports a HTTP recovery mode by holding the reset-button when powering on. The interface is reachable at 192.168.0.1 and supports installation using the factory image. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7dceef5ee554ec4ab5d2dd2ff999f4a60bf2e0f4)
* mpc85xx: add support for Watchguard Firebox T10David Bauer2023-03-109-1/+407
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 35f6d795134e9b089c4e763a7f58cba7d4e15e42)
* generic: remove patch for unused kernel versionDavid Bauer2023-03-051-21/+0
| | | | | | | | Remove this stray patch, as OpenWrt 22.03 does not target kernel 5.15. Fixes commit b18a0d0b92963 ("generic: add support for EON EN25QX128A spi nor flash") Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: MIPS: Add barriers between dcache & icache flushesDavid Bauer2023-03-051-0/+71
| | | | | | | | | | | | | | | This fixes spurious boot-errors with some ath79 MIPS 74Kc boards such as the AC Lite as well as Archer C7 v2. The missing barrier leads to the icache flush being executed before the dcache writeback, which results in the CPU executing the dummy infinite loop in tlbmiss_handler_setup_pgd. Applying this patch from upstream ensures the dcache is written back before flushing the icache. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 26bc8f68767e1ec6e33a84ef397e4c38d5968462)
* kernel: fix mtk dsa tag paddingFelix Fietkau2023-03-031-3/+2
| | | | | | | | | | The padding intended to avoid corrupted non-zero padding payload was accidentally adding too many padding bytes, tripping up some setups. Fix this by using eth_skb_pad instead. Fixes #11942. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 9307c27539805de021fb7163f6ad6dc08992331b)
* kernel: bump 5.10 to 5.10.168John Audia2023-02-1815-35/+35
| | | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch Removed upstreamed: generic-backport/807-v5.17-0003-nvmem-core-Fix-a-conflict-between-MTD-and-NVMEM-on-w.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.168&id=34ec4c7831c416ac56619477f1701986634a7efc Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 461072fc7b3d8fa77347a884fe5d36c81f660da8) [Refresh on OpenWrt 22.03] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: sam9x,sama5: fix racy SD card image generationPetr Štetiar2023-02-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | We've few low spec (make -j3) build workers attached to the 22.03 buildbot instance which from time to time exhibit following build failure during image generation (shortened for brewity): + dd bs=512 if=root.ext4 of=openwrt-22.03...sdcard.img.gz.img dd: failed to open 'root.ext4': No such file or directory Thats happening likely due to the fact, that on buildbots we've `TARGET_PER_DEVICE_ROOTFS=y` which produces differently named filesystem image in the SD card image target dependency chain: make_ext4fs -L rootfs ... root.ext4+pkg=68b329da and that hardcoded `root.ext4` image filename becomes available from other Make targets in the later stages. So lets fix this issue by using IMAGE_ROOTFS Make variable which should contain proper path to the root filesystem image. Fixing remaining subtargets ommited in commit 5c3679e39b61 ("at91: sama7: fix racy SD card image generation"). Fixes: 5c3679e39b61 ("at91: sama7: fix racy SD card image generation") Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 3b669bc3f32f7594f38187a284a65ca2c35a0121)
* at91: sama7: fix racy SD card image generationPetr Štetiar2023-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | We've few low spec (make -j3) build workers attached to the 22.03 buildbot instance which from time to time exhibit following build failure during image generation: + dd bs=512 if=root.ext4 of=openwrt-22.03-snapshot-r20028-43d71ad93e-at91-sama7-microchip_sama7g5-ek-ext4-sdcard.img.gz.img seek=135168 conv=notrunc dd: failed to open 'root.ext4': No such file or directory Thats likely due to the fact, that on buildbots we've `TARGET_PER_DEVICE_ROOTFS=y` which produces differently named filesystem image in the SD card image target dependency chain: make_ext4fs -L rootfs ... root.ext4+pkg=68b329da and that hardcoded root.ext4 becomes available from other target in the later stages. So lets fix this issue by using IMAGE_ROOTFS Make variable which should contain proper path to the root filesystem image. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 5c3679e39b615ff29c9315f810e8e15775cc2d01)
* kernel: bump 5.10 to 5.10.166John Audia2023-02-0519-61/+61
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 50324b949b91cfb70ced3869b09b895e45a5ae37)
* ramips: mt7621-dts: fix phy-mode of external phy on GB-PC2Arınç ÜNAL2023-02-031-1/+1
| | | | | | | | | The phy-mode property must be defined on the MAC instead of the PHY. Define phy-mode under gmac1 which the external phy is connected to. Tested-by: Petr Louda <petr.louda@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 5155200f97adaeaaac7b752b5a6a5e41cba3db6a)
* octeontx: add sqaushfs and ramdisk to featuresTim Harvey2023-02-031-1/+1
| | | | | | | | Add squashfs and ramdisk to features as these are commonly used images for the octeontx. Signed-off-by: Tim Harvey <tharvey@gateworks.com> (cherry picked from commit af5635e6ca12d3be275560a58ac6e2793e218fcd)
* ath79: add LTE packages for GL-XE300Tom Herbers2023-02-031-1/+2
| | | | | | | | | | | | | | | | | | Add LTE packages required for operating the LTE modems shipped with the GL-XE300. Example configuration for an unauthenticated dual-stack APN: network.wwan0=interface network.wwan0.proto='qmi' network.wwan0.device='/dev/cdc-wdm0' network.wwan0.apn='internet' network.wwan0.auth='none' network.wwan0.delay='10' network.wwan0.pdptype='IPV4V6' Signed-off-by: Tom Herbers <mail@tomherbers.de> (cherry picked from commit 67f283be4430ebfb46be6c00fcc7c12a6adabce3)
* ath79: add label-mac-device for GL-XE300Tom Herbers2023-02-031-0/+4
| | | | | | | | This adds an label-mac-device alias which refrences the mac which is printed on the Label of the device. Signed-off-by: Tom Herbers <mail@tomherbers.de> (cherry picked from commit f83f5f8452edd3115aacf333b0038da89639a218)
* ath79: add LTE led for GL.iNet GL-XE300Leo Soares2023-02-031-0/+1
| | | | | | | | | This commit adds the LTE led for GL.iNet GL-XE300 to the default leds config. Signed-off-by: Leo Soares <leo@hyper.ag> (cherry picked from commit 35a0f2b00c44a43ad087327f0cbdb1c9c5e60c49) Signed-off-by: Tom Herbers <mail@tomherbers.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 20:27:25 +0000