aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: add new devices in README and clean upYangbo Lu2021-02-191-33/+70
| | | | | | | | | Support new devices LS1046AFRWY and LX2160ARDB in README. Clean up README, and add missing LS1021ATWR deploy guide. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [adjust set of devices added, update commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add LX2160ARDB (Rev2.0 silicon) board supportYangbo Lu2021-02-192-4/+61
| | | | | | | | | | | | | | | | | | | | | | The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add FRWY-LS1046A board supportYangbo Lu2021-02-192-0/+46
| | | | | | | | | | | | | | | | | | | The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: move rework-sdcard-images out of fsl-sdbootAdrian Schmutzler2021-02-192-2/+6
| | | | | | | Upcoming devices will not need the migration setup, so let's move it out of the common definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use lzma-loader for Wevo devicesSeo Suchan2021-02-191-0/+2
| | | | | | | | | | As kernel size increased it start to fail to load squishfs image, using lzma-loader fixed it. wevo_11acnas is almost same device as w2914ns-v2 except ram size, so I expect same thing would've happen in that device too. Signed-off-by: Seo Suchan <abnoeh@mail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7621: add TP-Link EAP235-Wall supportSander Vanheule2021-02-193-0/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP235-Wall is a wall-mounted, PoE-powered AC1200 access point with four gigabit ethernet ports. When connecting to the device's serial port, it is strongly advised to use an isolated UART adapter. This prevents linking different power domains created by the PoE power supply, which may damage your devices. The device's U-Boot supports saving modified environments with `saveenv`. However, there is no u-boot-env partition, and saving modifications will cause the partition table to be overwritten. This is not an issue for running OpenWrt, but will prevent the vendor FW from functioning properly. Device specifications: * SoC: MT7621DAT * RAM: 128MiB * Flash: 16MiB SPI-NOR * Wireless 2.4GHz (MT7603EN): b/g/n, 2x2 * Wireless 5GHz (MT7613BEN): a/n/ac, 2x2 * Ethernet: 4× GbE * Back side: ETH0, PoE PD port * Bottom side: ETH1, ETH2, ETH3 * Single white device LED * LED button, reset button (available for failsafe) * PoE pass-through on port ETH3 (enabled with GPIO) Datasheet of the flash chip specifies a maximum frequency of 33MHz, but that didn't work. 20MHz gives no errors with reading (flash dump) or writing (sysupgrade). Device mac addresses: Stock firmware uses the same MAC address for ethernet (on device label) and 2.4GHz wireless. The 5GHz wireless address is incremented by one. This address is stored in the 'info' ('default-mac') partition at an offset of 8 bytes. From OEM ifconfig: eth a4:2b:b0:...:88 ra0 a4:2b:b0:...:88 rai0 a4:2b:b0:...:89 Flashing instructions: * Enable SSH in the web interface, and SSH into the target device * run `cliclientd stopcs`, this should return "success" * upload the factory image via the web interface Debricking: U-boot can be interrupted during boot, serial console is 57600 baud, 8n1 This allows installing a sysupgrade image, or fixing the device in another way. * Access serial header from the side of the board, close to ETH3, pin-out is (1:TX, 2:RX, 3:GND, 4:3.3V), with pin 1 closest to ETH3. * Interrupt bootloader by holding '4' during boot, which drops the bootloader into its shell * Change default 'serverip' and 'ipaddr' variables (optional) * Download initramfs with `tftpboot`, and boot image with `bootm` # tftpboot 84000000 openwrt-initramfs.bin # bootm Revert to stock: Using the tplink-safeloader utility from the firmware-utils package, TP-Link's firmware image can be converted to an OpenWrt-compatible sysupgrade image: $ ./staging_dir/host/bin/tplink-safeloader -B EAP235-WALL-V1 \ -z EAP235-WALLv1_XXX_up_signed.bin -o eap235-sysupgrade.bin This can then be flashed using the OpenWrt sysupgrade interface. The image will appear to be incompatible and must be force flashed, without keeping the current configuration. Known issues: - DFS support is incomplete (known issue with MT7613) - MT7613 radio may stop responding when idling, reboot required. This was an issue with the ddc75ff704 version of mt76, but appears to have improved/disappeared with bc3963764d. Error notice example: [ 7099.554067] mt7615e 0000:02:00.0: Message 73 (seq 1) timeout Hardware was kindly provided for porting by Stijn Segers. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ramips: remove factory image for TP-Link Archer C20 v1Stijn Segers2021-02-191-0/+1
| | | | | | | | | | | | Similarly to the Archer C2 v1, the Archer C20 v1 will brick when one tries to flash an OpenWrt factory image through the TP-Link web UI. The wiki page contains an explicit warning about this [1]. Disable the factory image altogether since it serves no purpose. [1] https://openwrt.org/toh/tp-link/tp-link_archer_c20_v1#installation Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ath79: fix position of SPDX license identifierAdrian Schmutzler2021-02-191-1/+0
| | | | | | | Strictly, the identifier needs to be in the line directly after the shebang. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix SPDX license identifier on local DTS filesAdrian Schmutzler2021-02-194-8/+4
| | | | | | | | | | | The SPDX license identifier must be in the first line of a file, unless there is a shebang (then it's the second line). Fix this for the local files, do not care about the upstream patches. While at it, update the identifiers where necessary. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: update ethernet kernel panics fixÁlvaro Fernández Rojas2021-02-1914-68/+108
| | | | | | | Use new patch from Sieng Piaw Liew. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: move mt7623a-unielec-u7623*.dts* out of patchDaniel Golle2021-02-194-387/+360
| | | | | | | Instead of adding those device tree sources using a patch, simply move them to the newly created dts folder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm27xx: add diag LEDsÁlvaro Fernández Rojas2021-02-191-0/+7
| | | | | | | We can now use the power LED for diag in more devices thanks to the latest patches from the RPi foundation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: bcm2708: add missing RPi B DTS fileÁlvaro Fernández Rojas2021-02-191-1/+1
| | | | | | | | RPI 1B DTS has been splitted into 2 files: - bcm2708-rpi-b.dts: Newest (rev2) RPI 1B - bcm2708-rpi-b-rev1.dts: Old (rev1) RPI 1B Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: more clean solution for out-of-tree DTSDaniel Golle2021-02-193-87/+85
| | | | | | | | | | | Use approach suggested by Adrian Schmutzler instead of introducing another device variable. Also revert the unnecessary white-space changes accidentally introduced by the previous commit. Fixed: c067b1e79b ("mediatek: move out-of-tree DTS files to dedicated dts folder") Suggested-by: Adrian Schmutzler <mail@adrianschmutzler.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: move out-of-tree DTS files to dedicated dts folderDaniel Golle2021-02-196-734/+159
| | | | | | | | | | | Use dedicated dts folder like on ramips to store device tree source files for boards not already supported in vanilla Linux. Doing so instead of having them in files-* has several advantages: * we don't need to duplicate them for several kernel versions * changes to a device tree don't trigger a complete kernel rebuild * the files are more obvious to find Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm27xx: add support for RPI CM4 and RPI 400Álvaro Fernández Rojas2021-02-182-6/+13
| | | | | | Support added to bcm2709 (32 bits) and bcm2711 (64 bits). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: import latest patches from the RPi foundationÁlvaro Fernández Rojas2021-02-18927-703/+41630
| | | | | | | | | bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.4 to 5.4.99John Audia2021-02-1831-89/+87
| | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. No manual changes needed. Build system: x86_64 Build-tested: bcm27xx/bcm2711 Signed-off-by: John Audia <graysky@archlinux.us>
* lantiq: fritz7320: enable USB power supplyMathias Kresin2021-02-181-0/+46
| | | | | | | | | | | | The USB ports if a FRIZZ!Box 7320 do not supply power to connected devices. Add the GPIOs enabling USB power as regulator, to enable USB power supply as soon as the USB driver is loaded. Fixes FS#3624 Signed-off-by: Mathias Kresin <dev@kresin.me>
* generic: don't lock when recursively deleting partitionsDavid Bauer2021-02-181-0/+24
| | | | | | | | When recursively deleting partitions, don't acquire the masters partition lock twice. Otherwise the process endy up in a deadlocked state. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add various kernel 5.10 config symbolsDavid Bauer2021-02-181-0/+36
| | | | | | These symbols were unset when configuring for ath79. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add support for Ubiquiti UniFi 6 LRDavid Bauer2021-02-186-2/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7622 512MB DDR3 RAM 64M SPI-NOR Flash (Winbond W25Q512JV) MediaTek MT7622 802.11bgn 4T4R WMAC MediaTek MT7915 802.11ax 4T4R Marvell AQR1112 100/1000/2500 NBase-T PHY Holtek HT32F52241 LED controller Reset Switch UART ---- CPU UART0 at the pinout next to the Holtek MCU. Pinout (first pin next to SoC / MCU) 0 3V3 1 RX 2 TX 3 GND Settings are 115200 8N1. Opening the case ---------------- Opening the case is not a nice task, as itis glued together. Insert a flat knife between the front and back casing below the ethernet port. Open up a gap this way and insert a flat scredriver, remove the knife. Work your way around the casing by applying force to seperate the front and back casing. This losens the glue and opens the plastic clips. Be gentle, as these clips are very cheap and break quickly. Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Transfer the OpenWrt sysupgrade image to the device using SCP. 3. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 4. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock6 5. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock8 $ dd if=openwrt.bin of=/dev/mtdblock9 6. Reboot the device. It should boot into OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add Ubiquiti LED driverDavid Bauer2021-02-185-0/+242
| | | | | | | | | | | Add a driver for controlling the RGB LED via Ubiquitis own "LEDBAR" LED controller based on the Holtek HT32F52241 MCU. This driver is initially used by the Ubiquiti UniFi 6 LR, however judging from FCC pictures the MCU is also found on the U6-Mesh as well as the U6-Extender. Signed-off-by: David Bauer <mail@david-bauer.net>
* bcm63xx: add kernel 5.10 supportÁlvaro Fernández Rojas2021-02-17141-0/+21640
| | | | | | Runtime-tested on Comtrend AR-5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 5.10 to 5.10.16Daniel Golle2021-02-172-2/+2
| | | | | | Compile and runtime-tested on mediatek/mt7622 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 5.10: refresh patchesAdrian Schmutzler2021-02-165-36/+41
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: 5.10: add missing partitions doc syntax commitAdrian Schmutzler2021-02-161-0/+324
| | | | | | | This patch has been added to 5.4, but not been copied to 5.10: 7495acb55573 ("kernel: backport mtd commit converting partitions doc syntax") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: hack-5.10: make UDP tunneling user-selectableAdrian Schmutzler2021-02-161-0/+11
| | | | | | | | | | | | | | | | This applies another patch from 5.4 to 5.10 as well: de09355f74c3 ("kernel/hack-5.4: make UDP tunneling user-selectable") UDP tunneling support isn't user-selectable, but it's required by WireGuard which is, for the time being, an out-of-tree module. We currently work around this issue by selecting an unrelated module which depends on UDP tunnelling (VXLAN). This is inconvenient, as it implies this unrelated module needs to be built-in when doing a monolithic build. Fix this inconvenience by making UDP tunneling user-selectable in the kernel configuration. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: 5.4: fix .patch file extensionAdrian Schmutzler2021-02-161-0/+0
| | | | | | | File extension was truncated for pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.pa Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: 5.10: fix busy wait loop in mediatek PPE codeAdrian Schmutzler2021-02-161-1/+1
| | | | | | | | | | | | | | Reapply changes added to 5.4 but not copied to 5.10: 3da4acaa7bba ("kernel: fix busy wait loop in mediatek PPE code") The intention is for the loop to timeout if the body does not succeed. The current logic calls time_is_before_jiffies(timeout) which is false until after the timeout, so the loop body never executes. time_is_after_jiffies(timeout) will return true until timeout is less than jiffies, which is the intended behavior here. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* generic: ar8216: update version switch for of_get_phy_mode fixAdrian Schmutzler2021-02-161-2/+2
| | | | | | | | | | | | | Kernel has changed the of_get_phy_mode API in commit 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings"). This is already included in kernel 5.5, so fix the version switch (though this will not actually matter for the versions we support). Similar driver adjustments to account for the API change will probably be necessary to various other local drivers. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* generic: ar8216: fix kernel 5.10 compile errorDavid Bauer2021-02-161-0/+8
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add linux 5.10 supportFelix Fietkau2021-02-16153-1/+31974
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: add bcm_sf2 fixes for the 5th GPHYRafał Miłecki2021-02-162-0/+76
| | | | | | | This allows using the last integrated PHY (and so e.g. WAN port on the ASUS GT-AC5300). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fix GPIOs support by limiting them to 64Rafał Miłecki2021-02-151-0/+23
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: use DTS patches sent upstreamRafał Miłecki2021-02-155-33/+145
| | | | | | | | There are 2 new patches: 1. Netgear R8000P switch ports 2. Netgear R8000P LEDs Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add USB packages to the DEFAULT_PACKAGESRafał Miłecki2021-02-151-0/+2
| | | | | | | All known 41 BCM4908 devices have USB ports so it makes sense to include those packages by default. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fix backport of PMB driverRafał Miłecki2021-02-151-0/+8
| | | | | | | Missing Makefile change was preventing kernel from actually compiling the driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: drop ofpart patch dropped from upstream mtd treeRafał Miłecki2021-02-156-236/+653
| | | | | | It stopped ofpart_parser_init() from being called Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport "ofpart" mtd parser upstream quirks supportRafał Miłecki2021-02-156-29/+77
| | | | | | | | | | This adds quirks support to the "ofpart" parser. It's required to support fixed partitions that require some extra logic. Right now only BCM4908 binding is supported (BCM4908 requires detecting currently used "firmware" partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix busy wait loop in mediatek PPE codeIlya Lipnitskiy2021-02-151-1/+1
| | | | | | | | | | | The intention is for the loop to timeout if the body does not succeed. The current logic calls time_is_before_jiffies(timeout) which is false until after the timeout, so the loop body never executes. time_is_after_jiffies(timeout) will return true until timeout is less than jiffies, which is the intended behavior here. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: mark toggle input on EX6150 as a switchKurt Roeckx2021-02-151-0/+1
| | | | | | | | | The Netgear EX6150 has an Access Point/Extender switch. Set it as an EV_SW. Otherwise when it's set to Access Point, it will trigger failsafe mode during boot. Fixes: FS#3590 Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
* Revert "imx6: bootscript-apalis: make it working on v2021.01 release"Petr Štetiar2021-02-141-4/+2
| | | | | | | | This reverts commit 4968fc8fb110612018af3ba2836be1b4744346e2 as the bump to v2021.01 needs swig on the host for pylibfdt which is needed by dtoc tool to generate .h/.c files from DTBs in SPL for mx6cuboxi_config. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* target: fix copying of licenses for SDK/toolchainAdrian Schmutzler2021-02-142-2/+6
| | | | | | | | | | | | | | | The SDK and target/toolchain copy the license file into their directories. During the rename/move from LICENSE to a LICENSES folder, this has not been updated. Update it now, and include the new COPYING file. While at it, improve formatting/indent. Fixes: 882e3014610b ("LICENSES: include all used licenses in LICENSES directory") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix factory image generation for Netgear and Zyxel boardsPaul Fertser2021-02-143-4/+2
| | | | | | | | | | | | | The factory images need to embed specific IDs to pass verification with the OEM firmware (including TFTP recovery), so they need to be per-device variables. Fixes: ab1584a797ad ("ath79: netgear: trim down uImage customisations") Fixes: 459c8c9ef816 ("ath79: add support for ZyXEL NBG6616") Reported-by: Marcin Juszkiewicz <marcin-openwrt@juszkiewicz.com.pl> Signed-off-by: Paul Fertser <fercerpav@gmail.com> [minor commit message adjustments, sort DEVICE_VARS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: espressobin: drop COMPHY removement patchTomasz Maciej Nowak2021-02-142-53/+0
| | | | | | | | | | There are proper workarounds merged to 5.4 stable tree for ESPRESSObin boards with older bootloader: 4e1a23779bde ("ata: ahci: mvebu: Make SATA PHY optional for Armada 3720") 40af962eb1d4 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ramips: manage low reset linesSander Vanheule2021-02-141-0/+47
| | | | | | | | | | | | The bootloader of a number of recent TP-Link devices does not properly initialise the MT7621's internal switch when booting from flash. To enable the mt7530 driver to clear the reset on the switch, the ramips reset controller must be allowed to toggle these. Backport upstream commit 3f9ef7785a9c from mips-next to allow control of the "mcm" reset line. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* imx6: bootscript-apalis: make it working on v2021.01 releasePetr Štetiar2021-02-141-2/+4
| | | | | | | | | Upstream in commit 8b9c0cb46471 ("apalis_imx6: boot env configuration updates") removed emmc legacy wrappers, but so far didn't included any replacements. Fix it by simply defining the missing variables and UUID gathering directly into the boot script. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm4908: refresh patchesAdrian Schmutzler2021-02-132-503/+1534
| | | | | | | | | | Our patch refresh tool creates quite a big diff for these patches, as it does not use rename syntax. Push the refresh separately so it does not pollute the next kernel bump. This is a purely cosmetic change. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix chip used for Meraki MR12 caldata_extractMartin Kennedy2021-02-131-3/+3
| | | | | | | | | | | | | The original setup fails to trigger ART calibration data extraction for the AR9287. Instead, it would only have extracted calibration data for an internal WMAC chip which is not present on this board. Fixes: 55d2db0e8ceb ("ath79: add support for Meraki MR12") Signed-off-by: Martin Kennedy <hurricos@gmail.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 03:27:54 +0000