aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: move mtk flow offload patches to backport-5.15Felix Fietkau2022-06-1812-6/+6
| | | | | | They were accepted upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cellSander Vanheule2022-06-181-1/+1
| | | | | | | | | | ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration" to load the device specific caldata, not "calibration". Update the nvmem-cell name to make the 5GHz radio work again. Fixes: d4b3b2394233 ("ath79: TP-Link EAP245 v3: convert radios to nvmem-cells") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: add support for power LED on Netgear GS308Tv1Andreas Böhler2022-06-181-0/+27
| | | | | | | | | | The Netgear GS308Tv1 is already supported by OpenWrt, but is missing LED support. After OpenWrt installation, all LEDs are off which makes the installation quite confusing. This enables support for the green/amber power LED to give feedback about the current status. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* bcm53xx: copy bgmac revert (performance fix) to 5.15Rafał Miłecki2022-06-171-0/+33
| | | | | Ref: 230c9da963aa ("bcm53xx: revert bgmac back to the old limited max frame size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: move ethernet phy node for TP-Link EAP devicesSander Vanheule2022-06-165-7/+48
| | | | | | | | Move the ethernet phy definition from the eap2x5-1port include to the device-specific DTS files. This is to prepare for new devices that have a different ethernet phy, at another MDIO address. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP225-Wall v1: convert radios to nvmem-cellsSander Vanheule2022-06-162-9/+24
| | | | | | | | | | | | | Replace the mtd-cal-data phandle by an nvmem-cell reference to the art partition for the 2.4GHz ath9k radio. Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP245 v3: convert radios to nvmem-cellsSander Vanheule2022-06-162-8/+25
| | | | | | | | | | | | | Replace the mtd-cal-data phandle by an nvmem-cell reference from the art partition for the 2.4GHz ath9k radio. Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using an nvmem-cell. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP225 v3: convert ath10k to nvmem-cellsSander Vanheule2022-06-162-1/+18
| | | | | | | | | | Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP225-Outdoor v1: convert ath10k to nvmem-cellsSander Vanheule2022-06-162-1/+18
| | | | | | | | | | Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP225 v1: convert ath10k to nvmem-cellsSander Vanheule2022-06-162-7/+24
| | | | | | | | | | Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: TP-Link EAP245 v1: convert ath10k to nvmem-cellsSander Vanheule2022-06-162-1/+18
| | | | | | | | | | Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: convert 1-port TP-Link EAP ath9k to nvmem-cellsSander Vanheule2022-06-161-3/+10
| | | | | | | | | | | Replace the mtd-cal-data phandle with an nvmem-cell reference for the 2.4GHz ath9k radio. This affects the following devices: - TP-Link EAP225 v1 - TP-Link EAP225 v3 - TP-Link EAP225-Outdoor v1 - TP-Link EAP245 v1 Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: drop phy-mask propertySander Vanheule2022-06-1571-128/+0
| | | | | | | The phy-mask property is no longer supported by the ag71xx-mdio driver, so let's drop it. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: ag71xx-mdio: remove phy-mask propertySander Vanheule2022-06-151-4/+0
| | | | | | | | | | | | | The phy-mask property is read by the ag71xx-mdio driver to set the mii_bus's phy_mask field. On OF platforms, the devicetree is expected to provide all present ethernet phy-s however, so the phy_mask field is later set to all-ones. Having a devicetree override is of no use then, so let's drop it. Cc: David Bauer <mail@david-bauer.net> Cc: John Crispin <john@phrozen.org> Signed-off-by: Sander Vanheule <sander@svanheule.net> Acked-by: David Bauer <mail@david-bauer.net>
* bcm53xx: revert bgmac back to the old limited max frame sizeRafał Miłecki2022-06-151-0/+33
| | | | | | | | | | | Bumping max frame size has significantly affected network performance. It was done by upstream commit that first appeared in the 5.7 release. This change bumps NAT masquarade speed from 196 Mb/s to 383 Mb/s for the BCM4708 SoC. Ref: f55f1dbaad33 ("bcm53xx: switch to the kernel 5.10") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* qoriq: use FIT uImage for Firebox M300 kernelStijn Tintel2022-06-141-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* qoriq: use KERNEL_SUFFIX in Build/sdcard-imgStijn Tintel2022-06-141-1/+1
| | | | | | | | | Use the KERNEL_SUFFIX variable in Build/sdcard-img, rather than using hardcoded "-kernel.bin", to allow overriding KERNEL_SUFFIX for a device. Fixes: 080a769b4da8 ("qoriq: new target") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: add support for MTS WG430223Mikhail Zhilkin2022-06-135-2/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MTS WG430223 is a wireless AC1300 (WiFi 5) router manufactured by Arcadyan company. It's very similar to Beeline Smartbox Flash (Arcadyan WG443223). Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 128 MiB Flash: 128 MiB (Winbond W29N01HV) Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2 Wireless 5 GHz (MT7615DN): a/n/ac, 2x2 Ethernet: 3xGbE (WAN, LAN1, LAN2) USB ports: No Button: 1 (Reset/WPS) LEDs: 2 (Red, Green) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2) OEM: Arcadyan WG430223 Installation ------------ 1. Login to the router web interface (superadmin:serial number) 2. Navigate to Administration -> Miscellaneous -> Access control lists & enable telnet & enable "Remote control from any IP address" 3. Connect to the router using telnet (default admin:admin) 4. Place *factory.trx on any web server (192.168.1.2 in this example) 5. Connect to the router using telnet shell (no password required) 6. Save MAC adresses to U-Boot environment: uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \ awk '{print $5}') uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \ awk '{print $5}') uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \ awk '{print $5}') uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \ awk '{print $5}') 7. Ensure that MACs were saved correctly: uboot_env --get --name eth2macaddr uboot_env --get --name eth3macaddr uboot_env --get --name ra0macaddr uboot_env --get --name rax0macaddr 8. Download and write the OpenWrt images: cd /tmp wget http://192.168.1.2/factory.trx mtd_write erase /dev/mtd4 mtd_write write factory.trx /dev/mtd4 9. Set 1st boot partition and reboot: uboot_env --set --name bootpartition --value 0 Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv bootpartition 1 reboot 2. Optional step. Upgrade the stock firmware with any version to overwrite the OpenWrt in Slot 1. MAC addresses ------------- +-----------+-------------------+----------------+ | Interface | MAC | Source | +-----------+-------------------+----------------+ | label | A4:xx:xx:51:xx:F4 | No MACs was | | LAN | A4:xx:xx:51:xx:F6 | found on Flash | | WAN | A4:xx:xx:51:xx:F4 | [1] | | WLAN_2g | A4:xx:xx:51:xx:F5 | | | WLAN_5g | A6:xx:xx:21:xx:F5 | | +-----------+-------------------+----------------+ [1]: a. Label wasb't found neither in factory nor in other places. b. MAC addresses are stored in encrypted partition "glbcfg". Encryption key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack with saving of the MACs to u-boot-env during the installation was applied. c. Default Ralink ethernet MAC address (00:0C:43:28:80:A0) was found in "Factory" 0xfff0. It's the same for all MTS WG430223 devices. OEM firmware also uses this MAC when initialazes ethernet driver. In OpenWrt we use it only as internal GMAC (eth0), all other MACs are unique. Therefore, there is no any barriers to the operation of several MTS WG430223 devices even within the same broadcast domain. Stock firmware image format --------------------------- The same as Beeline Smartbox Flash but with another trx magic +--------------+---------------+----------------------------------------+ | Offset | | Description | +==============+===============+========================================+ | 0x0 | 31 52 48 53 | TRX magic "1RHS" | +--------------+---------------+----------------------------------------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: create new dtsi for Arcadyan routersMikhail Zhilkin2022-06-132-186/+199
| | | | | | | | | | | | | | | | | | | This commit moves common properties for the boards below to a new dtsi: Beeline Smartbox Flash (Arcadyan WG443223) MTS WG430223 (Arcadyan WG430223) The boards are almost the same. Here is the differences: +------+----------+----------+ | | WG430223 | WG443223 | +------+----------+----------+ | RAM | 128 | 256 | +------+----------+----------+ | USB | - | 1x3.0 | +------+----------+----------+ | LEDS | RG | RGB | +------+----------+----------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: allow custom trx magic for ArcadyanMikhail Zhilkin2022-06-131-3/+4
| | | | | | | | | | | | This commit: 1. Renames beeline-trx recipe in mt7621.mk to arcadyan-trx. The recipe is necessary for: - MTS WG430223 (Arcadyan WG430223) - Beeline Smartbox Flash (Arcadyan WG443223) 2. Allows specify custom trx magic which is different for the routers mentined above. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: decrease SPI frequency for Phicomm K2PAviana Cruz2022-06-131-2/+1
| | | | | | | | | | Some K2P comes with the worse boards with GD25Q128 (may be A2), which only works with 50MHz frequency and less. Reduce spi frequency so that these routers can boot. remove m25p,fast-read because it isn't needed for 50MHz SPI. Signed-off-by: Aviana Cruz <gwencroft@proton.me> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: move ubnt-xm to tinyNick Hainke2022-06-1111-265/+281
| | | | | | | | | | | | | ath79 has was bumped to 5.10. With this, as with every kernel change, the kernel has become larger. However, although the kernel gets bigger, there are still enough flash resources. But the RAM reaches its capacity limits. The tiny image comes with fewer kernel flags enabled and fewer daemons. Improves: 15aa53d7ee65 ("ath79: switch to Kernel 5.10") Tested-by: Robert Foss <me@robertfoss.se> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: add Ubiquiti UniFi 6 LR v2 targetsHenrik Riomar2022-06-114-0/+239
| | | | | | | | | | | | | | | Add targets: * Ubiquiti UniFi 6 LR v2 * Ubiquiti UniFi 6 LR v2 (U-Boot mod) This target does not have a RGB led bar like v1 did Used target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi as inspiration The white dome LED is default-on, blue will turn on when the system is in running state Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* mediatek: new target ubnt_unifi-6-lr-v1-ubootmodHenrik Riomar2022-06-112-5/+6
| | | | | | | | based on current ubnt_unifi-6-lr-ubootmod Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* mediatek: new target mt7622-ubnt-unifi-6-lr-v1Henrik Riomar2022-06-115-31/+35
| | | | | | | | | | | | Based on current mt7622-ubnt-unifi-6-lr, this is a preparation for adding a v2 version of this target * v1 - with led-bar * v2 - two simple GPIO connected LEDs (in later commits) Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* ath79: D-Link DAP-2680: select QCA9984 firmwareStijn Segers2022-06-111-1/+1
| | | | | | | | | | | | The DAP-2680 has a QCA9984 radio [1], but the commit adding support mistakenly adds the QCA99x0 firmware package. See forum topic [2]. [1] https://wikidevi.wi-cat.ru/D-Link_DAP-2680_rev_A1 [2] https://forum.openwrt.org/t/missing-5ghz-radio-on-dlink-dap-2680/ Fixes: 5b58710fad21 ("ath79: add support for D-Link DAP-2680 A1") Signed-off-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Alessandro Fellin <af.registrazioni@gmail.com>
* octeon: add SUPPORTED_DEVICES to er/erlitePaul Spooren2022-06-091-0/+2
| | | | | | | | | | | | | | | | Using the BOARD_NAME variable results for both er and erlite devices to identify themselfs as `er` and `erlite` (via `ubus call system board`). This is problematic when devices search for firmware upgrades since the OpenWrt profile is actually called `ubnt_edgerouter` and `ubnt_edgerouter-lite`. By adding the `SUPPORTED_DEVICE` a mapping is created to point devices called `er` or `erlite` to the corresponding profile. FIXES: https://github.com/openwrt/asu/issues/348 Signed-off-by: Paul Spooren <mail@aparcar.org>
* realtek: add gpio-restart for D-Link DGS-1210-28Luiz Angelo Daros de Luca2022-06-071-0/+6
| | | | | | | | A GPIO assert is required to reset the system. Otherwise, the system will hang on reboot. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* realtek: add reset button for D-Link DGS-1210-28Luiz Angelo Daros de Luca2022-06-071-0/+18
| | | | | | | Tested in a DGS-1210-28 F3, both triggering failsafe and reboot. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* bcm53xx: remove BROKEN flag from Asus RT-AC88UArınç ÜNAL2022-06-071-1/+0
| | | | | | | The image builds and works fine on Asus RT-AC88U. Therefore, remove the BROKEN flag from the makefile. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* kernel: bump 5.15 to 5.15.45Rui Salvaterra2022-06-069-9/+9
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.44Rui Salvaterra2022-06-066-8/+7
| | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.42Rui Salvaterra2022-06-0616-312/+36
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch [1] generic/pending-5.15/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch [2] generic/pending-5.15/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch [3] generic/pending-5.15/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch [4] generic/pending-5.15/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch [5] Manually rebased: generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=88b937673b3552d54da20f648e61a123f4c1fa67 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=5f4197a020c049a59ea7907c31f9ab037dcefefe [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=7613dcaceee281973145588f4244f2f78ef85b7f [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=f96b2e06721249ebf8da3254cfef29dcb6583948 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=b329889974aed47e1167c85653c07097013e01a7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.41Rui Salvaterra2022-06-0657-308/+246
| | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch [1] Other patches automatically rebased. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.41&id=99858114a3b2c8f5f8707d9bbd46c50f547c87c0 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.120John Audia2022-06-068-10/+10
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.119John Audia2022-06-065-8/+7
| | | | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.118John Audia2022-06-069-129/+13
| | | | | | | | | | | | | Removed upstreamed: generic-backport/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch generic-backport/774-v5.15-2-igc-remove-phy-type-checking.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.117John Audia2022-06-0614-91/+29
| | | | | | | | | | | | Removed upstreamed: backport-5.10/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.116Hauke Mehrtens2022-06-067-90/+6
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/900-regulator-consumer-Add-missing-stubs-to-regulator-co.patch All other patches automatically rebased. Compile-tested: lantiq/xrx200, armvirt/64 Run-tested: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: add support for ZyXEL GS1900-24ERaylynn Knight2022-06-062-0/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24E is a 24 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24E * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8GE * Ethernet: 24x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 24 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Switch: 1 Power switch on rear of device * Power 120-240V AC C13 * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin file and select open so File Path is updated with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24E is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com>
* ath79: allow use GPIO17 as regular gpio on GL-AR300M devicesPtilopsis Leucotis2022-06-051-3/+3
| | | | | | | | Small update to my previous path 'fix I2C on GL-AR300M devices'. This update allow using GPIO17 as regular GPIO in case it not used as I2C SDA line. Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com>
* ath79: ZTE MF286[,A,R]: use GPIO19 as ath9k LEDLech Perczak2022-06-051-14/+7
| | | | | | | | | | | | With the pinctrl configuration set properly by the previous commit, the LED stays lit regardless of status of 2.4GHz radio, even if 5GHz radio is disabled. Map GPIO19 as LED for ath9k, this way the LED will show activity for both bands, as it is bound by logical AND with output of ath10k-phy0 LED. This works well because during management traffic, phy*tpt triggers typically cause LEDs to blink in unison. Link: <https://github.com/openwrt/openwrt/pull/9941> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: ZTE MF286[,A,R]: fix WLAN LED mappingLech Perczak2022-06-051-0/+8
| | | | | | | | | | The default configuration of pinctrl for GPIO19 set by U-boot was not a GPIO, but an alternate function, which prevented the GPIO hog from working. Set GPIO19 into GPIO mode to allow the hog to work, then the ath10k LED output can control the state of actual LED properly. Link: <https://github.com/openwrt/openwrt/pull/9941> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ipq40xx: add support for Linksys WHW01 v1Peter Adkins2022-06-057-5/+359
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Linksys WHW01 v1 ("Velop") [FCC ID Q87-03331]. Specification ------------- SOC: Qualcomm IPQ4018 WiFi 1: Qualcomm QCA4019 IEEE 802.11b/g/n WiFi 2: Qualcomm QCA4019 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Ethernet: Qualcomm QCA8072 (2-port) SPI Flash 1: Mactronix MX25L1605D (2MB) SPI Flash 2: Winbond W25M02GV (256MB) DRAM: Nanya NT5CC128M16IP-DI (256MB) LED Controller: NXP PCA963x (I2C) Buttons: Single reset button (GPIO). Notes ----- There does not appear to be a way to trigger TFTP recovery without entering U-Boot. The device must be opened to access the serial console in order to first flash OpenWrt onto a device from factory. The device has automatic recovery backed by a second set of partitions on the larger of the two SPI flash ICs. Both the primary and secondary must be flashed to prevent accidental rollback to "factory" after 3 failed boot attempts. Serial console -------------- A serial console is available on the following pins of the populated J2 connector on the device mainboard (115200 8n1). (<-- Top of PCB / Device) J2 [o o o o o o] | | | | | `-- GND | `---- TX `--------- RX Installation instructions ------------------------- 1. Setup TFTP server with server IP set to 192.168.1.236. 2. Copy compiled `...squashfs-factory.bin` to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Revert to "factory" ------------------- 1. Download latest firmware update from vendor support site. 2. Copy extracted `.img` file to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Link: https://github.com/openwrt/openwrt/pull/3682 Signed-off-by: Peter Adkins <peter@sunkenlab.com> (calibration from nvmem, updated to 5.10+5.15) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: remove patch to fix vlan setup on mv88e6xxxJosef Schlehofer2022-06-051-27/+0
| | | | | | | | | | | | This patch was present in Linux kernel [1] since version 5.11rc1, but it was superseded by another patch, which set configure_vlan_while_not_filtering to true by default since kernel v5.12-rc2 [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/net/dsa/mv88e6xxx/chip.c?h=v5.15.41&id=b8b79c414eca4e9bcab645e02cb92c48db974ce9 [2] https://github.com/torvalds/linux/commit/0ee2af4ebbe3c4364429859acd571018ebfb3424# Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xxChristian Lamparter2022-06-052-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hannu Nyman wrote in openwrt's github issue #9962: |Based on forum discussion, the commit 0bc794a |"kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash" |causes flash memory chip misdetection for some other |Fritzbox devices, as the commit only defines a 4-byte flash |memory chip ID that matches several chips used in the devices. | |See discussion from this onward |<https://forum.openwrt.org/t/openwrt-22-03-0-rc1-first-release-candidate/126045/182> | |OpenWrt 22.03.0-rc2 and rc3 are causing on a Fritzbox 7412 |bootloops due to a misdetected flash chip. | |Yup, that patch is missing the 5th ID byte entirely - both chips |share the same first 4; | | TC58NVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0x72 (digikey datasheet, page 35) | TC58BVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0xf2 (digikey datasheet, page 28) | |The commit has also been backported to openwrt-22.03 after rc1, |so both rc2 and rc3 suffer from this bug." Andreas' TC58NVG0S3H seems not to follow Toshibas/Kioxa's own datasheet. It only reports the first four bytes: "98 f1 80 15 00 00 00 00". This patch changes the id_len in the entry to 8. This makes it so that Andreas' NAND is still detected. At the same time, this prevents other Toshiba NAND flash chips - that share the same four bytes - from being misdetected. The issue has been reported upstream, since they also accepted the initial patch... so if not addressed, 5.19/5.20 will also break those affected devices again. Reported-by: Peter-vdL Fixes: 0bc794a66845 ("kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash") Link: <https://github.com/openwrt/openwrt/issues/9962> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: modules: make ar8216/8327 modularizableChristian 'Ansuel' Marangi2022-06-052-6/+10
| | | | | | | Make ar8216/8327 swconfig driver modularizable and add entry to the netdevices.mk kernel modules file. Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* generic: 5.15: fix wrong PACKET_MANGLE select in swconfig switch patchChristian 'Ansuel' Marangi2022-06-051-1/+1
| | | | | | | | | In the rebase process of 5.15 hack patch the ETHERNET_PACKET_MANGLE got wrongly swapped from AR8216_PHY to PSB6970_PHY. Restore the ETHERNET_PACKET_MANGLE select to the right place. Fixes: 1f302afd7350 ("generic: 5.15: rework hack patch") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* sunxi/cortexa53: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-042-0/+20
| | | | | | | This enables armv8 crypto extensions version of AES, GHASH, SHA1, and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* sunxi/cortexa53: refresh kernel 5.15 configEneas U de Queiroz2022-06-041-8/+6
| | | | | | | | | This is result of a make kernel_oldconfig CONFIG_TARGET=subtarget. One new option popped up: Support for the Allwinner H616 CCU (SUN50I_H616_CCU) [Y/n/?] (NEW) n Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 15:25:14 +0000