aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* ipq40xx: WAC510: device-tree overhaulingChristian Lamparter2022-03-262-40/+33
| | | | | | | | | removes usb-port remains as neither the WAC510 nor the WAC505 come with a USB port. Update the LED properties to phase out labels and introduce generic node-names as well as adding the color, function and function-enumerator properties. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add missing (disabled) GOOGLE_* symbolsChristian Lamparter2022-03-261-0/+6
| | | | | | | | | | | | | ARM Builds like sunxi/cortexa53 or the rpi family failed to build due to a new symbols showing up: |Google Firmware Drivers (GOOGLE_FIRMWARE) [Y/n/?] y | Coreboot Table Access (GOOGLE_COREBOOT_TABLE) [M/n/y/?] m | Coreboot Framebuffer (GOOGLE_FRAMEBUFFER_COREBOOT) [N/m/?] (NEW) |Error in reading or end of file. Fixes: e5b009e53281 ("kernel: Package GOOGLE_FIRMWARE drivers") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix link for long cables with OCEDO RaccoonDavid Bauer2022-03-251-1/+12
| | | | | | | | | The OCEDO Raccoon had significant packet-loss with cables longer than 50 meter. Disabling EEE restores normal operation. Also change the ethernet config to reduce loss on sub-1G links. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: mtdsplit: support UBI after FIT imagesFelix Fietkau2022-03-251-2/+7
| | | | | | Change the partition name accordingly. Same behavior as mtdsplit_uimage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mtk_bmt: add debugfs file to attempt repair of remapped sectorsFelix Fietkau2022-03-251-1/+26
| | | | | | This can be used for sectors that are not physically damaged Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add support for mediatek NMBM flash mapping supportFelix Fietkau2022-03-254-4/+2361
| | | | | | | This NAND flash remapping method is used on newer MediaTek devices with NAND flash. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: skip bbt scan on mt7621Felix Fietkau2022-03-251-1/+1
| | | | | | reduces unnecessary flash reads and speeds up boot time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: enable support for mtk_bmt in the nand flash driverFelix Fietkau2022-03-251-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621_nand: initialize ECC_FDMADDRFelix Fietkau2022-03-251-0/+4
| | | | | | This is needed for the ECC controller to access FDM data Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621_nand: reduce log verbosityStijn Tintel2022-03-251-1/+1
| | | | | | | | | Avoid flooding the log with the message below by increasing the log level to debug: mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: move mt7621_nand driver to filesStijn Tintel2022-03-252-1356/+1353
| | | | | | | | | | | The patch was rejected by upstream. The mtk_nand driver should be modified to support the mt7621 flash controller instead. As there is no newer version to backport, or no upstream version to fix bugs, let's move the driver to the files dir under the ramips target. This makes it easier to make changes to the driver while waiting for mt7621 support to land in mtk_nand. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: mtk_bmt: on error, do not attempt to remap out-of-range blocksFelix Fietkau2022-03-252-15/+24
| | | | | | Pass errors to caller instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mtk_bmt: fix block copying on remap with bmt v2Felix Fietkau2022-03-251-6/+6
| | | | | | Copy from the previously mapped block (in case it was remapped already) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mtk_bmt: allow get_mapping_block to return an errorFelix Fietkau2022-03-254-8/+25
| | | | | | | Used by the mapping implementation to indicate that no backing block is available Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: split up mtk_bmt driver codeFelix Fietkau2022-03-255-806/+857
| | | | | | Keep a separate source file per variant Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: update E2600AC c1/c2 board张 鹏2022-03-254-16/+28
| | | | | | | | Modified the radio frequency hardware part of e2600ac c1/c2, need to cooperate with the modified board.bin file, the device can work normally. Signed-off-by: 张 鹏 <sd20@qxwlan.com>
* lantiq: xrx200: replace patch with upstream versionAleksander Jan Bajkowski2022-03-255-101/+402
| | | | | | | | | | | This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: move rtl8152 patches to genericAleksander Jan Bajkowski2022-03-2516-0/+0
| | | | | | | | | | | | | This commit moves the patches for the r8152.c driver to the generic directory. Previously they were only available on the bcm27xx target. With these patches the Realtek RTL8153C, RTL8153D, RTL8156A and RTL8156B chips are supported on all targets by the kmod-usb-net-rtl8152 module. The RTL8156A and RTL8156B are the 2.5Gb/s Ethernet adapters. The patches have been tested on TP-Link UE300 (RTL8153A) and UNITEK 1313B (RTL8156B). Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: backport two intel igc patches from 5.15Pascal Coudurier2022-03-252-0/+116
| | | | | | | | | | | to allow proper initialization of device - igc: Remove _I_PHY_ID checking - igc: Remove phy->type checking Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr> (refreshed) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-cdev: re-add nu801 userspace driverChris Blake2022-03-252-2/+2
| | | | | | | | | | | | | | | | | | | | | This reverts commit 80b7a8a7f5a0a88fde6dd19f097df4d7cac9ff04. Now that 5.10 is the default kernel for all platforms, we can bring back the NU801 userspace driver for platforms that rely on it. Currently it's used on the MX100 x86_64 target, but other Meraki platforms use this controller. Note that we also now change how we load nu801. The way we did this previously with procd worked, but it meant it didn't load until everything was up and working. To fix this, let's call nu801 from boot and re-trigger the preinit blink sequence. Since nu801 runs as a daemon this is now something we can do. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (removed empty line, currently only MX100 uses it so: @TARGET_x86) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for FRITZ!Box 7520Andre Heider2022-03-251-0/+2
| | | | | | | | | | | | | This model, also know as "1&1 HomeServer", shares the same features as 7530. The vendor firmware has artificial software limitations: only 2 of the 4 LAN-Ports are GBit, and the USB-Host is only v2.0. With OpenWrt, USB is already working at v3.0. Signed-off-by: Andre Heider <a.heider@gmail.com> (updated commit message to reflect current state) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: Add subtarget for Google WiFi (Gale)Brian Norris2022-03-258-4/+453
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Google WiFi (codename: Gale) is an IPQ4019-based AP, with 2 Ethernet ports, 2x2 2.4+5GHz WiFi, 512 MB RAM, 4 GB eMMC, and a USB type C port. In its stock configuration, it runs a Chromium OS-based system, but you wouldn't know it, since you can only manage it via a "cloud" + mobile-app system. The "v2" label is coded into the bootloader, which prefers the "google,gale-v2" compatible string. I believe "v1" must have been pre-release hardware. Note: this is *not* the Google Nest WiFi, released in 2019. I include "factory.bin" support, where we generate a GPT-based disk image with 2 partitions -- a kernel partition (using the custom "Chrome OS kernel" GUID type) and a root filesystem partition. See below for flashing instructions. Sysupgrade is supported via recent emmc_do_upgrade() helper. This is a subtarget because it enables different features (FEATURES=boot-part rootfs-part) whose configurations don't make sense in the "generic" target, and because it builds in a few USB drivers, which are necessary for installation (installation is performed by booting from USB storage, and so these drivers cannot be built as modules, since we need to load modules from USB storage). Flashing instructions ===================== Documented here: https://openwrt.org/inbox/toh/google/google_wifi Note this requires booting from USB storage. Features ======== I've tested: * Ethernet, both WAN and LAN ports * eMMC * USB-C (hub, power-delivery, peripherals) * LED0 (R/G/B) * WiFi (limited testing) * SPI flash * Serial console: once in developer mode, console can be accessed via the USB-C port with SuzyQable, or other similar "Closed Case Debugging" tools: https://chromium.googlesource.com/chromiumos/third_party/hdctools/+/master/docs/ccd.md#suzyq-suzyqable * Sysupgrade Not tested: * TPM Known not working: * Reboot: this requires some additional TrustZone / SCM configuration to disable Qualcomm's SDI. I have a proposal upstream, and based on IRC chats, this might be acceptable with additional DT logic: [RFC PATCH] firmware: qcom_scm: disable SDI at boot https://lore.kernel.org/linux-arm-msm/20200721080054.2803881-1-computersforpeace@gmail.com/ * SMP: enabling secondary CPUs doesn't currently work using the stock bootloader, as the qcom_scm driver assumes newer features than this TrustZone firmware has. I posted notes here: [RFC] qcom_scm: IPQ4019 firmware does not support atomic API? https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/ * There's a single external button, and a few useful internal GPIO switches. I haven't hooked them up. The first two are fixed with subsequent commits. Additional notes ================ Much of the DTS is pulled from the Chrome OS kernel 3.18 branch, which the manufacturer image uses. Note: the manufacturer bootloader knows how to patch in calibration data via the wifi{0,1} aliases in the DTB, so while these properties aren't present in the DTS, they are available at runtime: # ls -l /sys/firmware/devicetree/base/soc/wifi@a*/qcom,ath10k-pre-calibration-data -r--r--r-- 1 root root 12064 Jul 15 19:11 /sys/firmware/devicetree/base/soc/wifi@a000000/qcom,ath10k-pre-calibration-data -r--r--r-- 1 root root 12064 Jul 15 19:11 /sys/firmware/devicetree/base/soc/wifi@a800000/qcom,ath10k-pre-calibration-data Ethernet MAC addresses are similarly patched in via the ethernet{0,1} aliases. Signed-off-by: Brian Norris <computersforpeace@gmail.com> (updated 901 - x1pro moved in the process) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: qcom_scm: Fix cold boot address commandBrian Norris2022-03-251-0/+121
| | | | | | | | | | | | | See my upstream questions: https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/ This effectively reverts upstream Linux commit 13e77747800e ("firmware: qcom: scm: Use atomic SCM for cold boot"), because Google WiFi boot firmwares don't support the atomic variant. This fixes SMP support for Google WiFi. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ipq40xx: qcom_scm: Disable SDI at bootBrian Norris2022-03-251-0/+47
| | | | | | | | | | | | See my upstream RFC of this: https://lore.kernel.org/linux-arm-msm/20200721080054.2803881-1-computersforpeace@gmail.com/ This fixes warm boot (reboot) for Google WiFi devices using their factory bootloader/firmware. I may resend this upstream eventually. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ipq40xx: Support Chromium OS image-type creationBrian Norris2022-03-251-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | See firmware-utils.git commits [1], which implemented the cros-vbutil verified-boot payload-packing tool, and extended ptgen for the CrOS kernel partition type. With these, it's now possible to package kernel + rootfs to make disk images that can boot a Chrome OS-based system (e.g., Chromebooks, or even a few AP models). Regarding PARTUUID= changes: Chromium bootloaders work well with a partition number offset (i.e., relative to the kernel partition), so we'll be using a slightly different root UUID line. NB: I've made this support specific to ip40xx for now, because I only plan to support an IPQ4019-based AP that uses a Chromium-based bootloader, but this image format can be used for essentially any Chromebook, as well as the Google OnHub, a prior Chromium-based AP using an IPQ8064 chipset. [1] ptgen: add Chromium OS kernel partition support https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=6c95945b5de973026dc6f52eb088d0943efa96bb cros-vbutil: add Chrome OS vboot kernel-signing utility https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=8e7274e02fdc6f2cb61b415d6e5b2e1c7e977aa1 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* apm821xx: fix crash/panic related to SATA/SSD choiceChristian Lamparter2022-03-251-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ticerex on the OpenWrt Forum reported a gnarly crash when he was using Samsung 840 and 850 EVOs with his MyBook Live: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This turned out this is an issue with upstream changing ATA_TAG_INTERNAL's value from 31 to 32 during 4.18 release. Update "SATA_DWC_QCMD_MAX" to account for that. Link: https://forum.openwrt.org/t/my-book-live-duo-reboot-loop/122464 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: disable non-building tel(co Electronics) x1proChristian Lamparter2022-03-251-0/+1
| | | | | | | | | | Tel(co Electronics) X1 Pro is preventing ipq40xx generic from building due to the KERNEL_SIZE. Whenever bigger kernels are possible, if lzma is supported is unknown. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix TPLINK_HWREV field for TL-WR1043ND v4Matthias Schiffer2022-03-251-0/+1
| | | | | | | | | | Required to allow sysupgrades from OpenWrt 19.07. Closes #7071 Fixes: 98fbf2edc021 ("ath79: move TPLINK_HWID/_HWREV to parent for tplink-safeloader") Tested-by: J. Burfeind <git@aiyionpri.me> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* imagebuilder: fix broken image generation with external targetsPetr Štetiar2022-03-251-1/+1
| | | | | | | | | | When using external targets there is a symlink being created for the target under target/linux which then becomes dangling under Image Builder. Fix it by dereferencing the possible symlink. Tested on IB with external target, ipq40xx and mvebu. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* qoriq: remove CONFIG_GDB_SCRIPTS from kernel configStijn Tintel2022-03-251-1/+0
| | | | | | | | It is disabled in the generic kernel config and not used in any of the other targets. There was no specific reason for enabling it, so let's be consistent and remove it from the qoriq kernel config. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mpc85xx: overhaul WS-AP3825i LED setupDavid Bauer2022-03-242-12/+31
| | | | | | | | | | | | As the LED controller is working now, we can make good use of the LEDs now. - Drop the model-name prefix - Rename eth0 / eth1 LEDs to LAN1 / LAN2, as they are labeled as such on the casing - Enable wired LEDs in userspace Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: move Extreme WS-AP3825i GPIO extenderDavid Bauer2022-03-241-23/+25
| | | | | | | Move the GPIO extender to the SoC node. Otherwise, the legacy PowerPC init code will not populate the BUS and thus never probe spi-gpio. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: change Ubiquiti UniFi AP model name to include "AP"Matthias Schiffer2022-03-242-2/+2
| | | | | | | | | While it hasn't always been clear whether the "AP" is part of the model name on the Ubiquiti website, we include it for all other pre-AC variants (AP Pro and the AP Outdoor+). Add it to the original UniFi AP as well for consistency. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath79: fix label MAC address for Ubiquiti UniFiMatthias Schiffer2022-03-243-4/+2
| | | | | | The label has the MAC address of eth0, not the WLAN PHY address. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: generic: fix warning in FIT partition parserDaniel Golle2022-03-241-2/+2
| | | | | | Use 'const char *' where necessary to make gcc get quiet. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: generic: improve FIT partition parserDaniel Golle2022-03-242-13/+41
| | | | | | | | | * only map filesystems configured in 'loadables' * allow mapping more than one filesystem (e.g. customization/branding or localization in addition to rootfs) * small cleaning here and there Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: generic: use chosen bootconf in FIT partition parserDaniel Golle2022-03-211-4/+13
| | | | | | | | | If the selected boot configuration is stored by U-Boot in '/chosen' node as 'bootconf' attribute, use that configuration to resolve the block device used as rootfs. Fall back to use the default configuration in case 'bootconf' is not present. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: cortexa7: fix ethernet link detection on a20-olinuxino-lime2Petr Štetiar2022-03-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | a20-olinuxino-lime2 is currently having hard time with link detection of certain 1000Mbit partners due to usage of generic PHY driver, probably due to following missing workaround introduced in upstream in commit 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround"): The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. This patch implements the workaround by defining a KSZ9031 specific get_feature callback to force the Asymmetric Pause capability bit to be cleared. This fixes issues where the link would not come up at boot time, or when the Asym Pause bit was set later on. As a20-olinuxino-lime2 has Micrel KSZ9031RNXCC-TR Gigabit PHY since revision H, so we need to use Micrel PHY driver on those devices. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips/mediatek: enable threaded NAPI in the ethernet driverFelix Fietkau2022-03-212-1/+42
| | | | | | Improves performance, especially under load Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Fix patch headerMarek Behún2022-03-211-1/+1
| | | | | | | | | | Remove "a" character from the first line of patch 738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch Otherwise `git am` fails to apply this patch which is annoying when trying to do some development / rebasing. Signed-off-by: Marek Behún <kabel@kernel.org>
* mvebu: udpu: include LM75 kmod by defaultRobert Marko2022-03-211-1/+1
| | | | | | | uDPU has 2 LM75 compatible temperature sensors, so include the driver for them by default in order to utilize them. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mvebu: udpu: fix initramfs bootingRobert Marko2022-03-211-1/+1
| | | | | | | | | | uDPU provides a FIT based initramfs, but currently gets stuck after U-boot starts the kernel at "Starting kernel..". It is due to the load address being too low, so increase it in order to get the initramfs booting again. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: delete Linux 5.4 config and patchesDaniel Golle2022-03-211708-477713/+0
| | | | | | | | As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-205-2/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* mediatek: Add GD5F1GQ5xExxG to mtk-snandRichard Huynh2022-03-201-0/+4
| | | | | | Some units of the Xiaomi Redmi Router AX6S/Xiaomi Router AX3200 contain this part. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* ipq40xx: add support for Telco X1 ProNicholas Smith2022-03-195-2/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | Telco X1 Pro is a Cat12 LTE-A Pro modem router. Vendor firmware is based on a recent version of OpenWrt. Flashing is possible via CLI using sysupgrade -F -n The serial headers allow bootloader and console access Serial setting: 115200 8N1 Brief Specifications: IPQ4019 SoC 32MB flash 512MB RAM 4x gigabit LAN 1x gigabit WAN Dual-band Wave-2 wifi 2x SMA LTE antenna connectors 2x RP-SMA wifi antennas 1x USB 2.0 port 1x Reset button Serial headers installed 1x Nano SIM tray 1x Quectel EM-12G LTE-A Pro modem 1x M.2 slot attached to USB 3.0 1x internal micro SD card slot Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
* ramips: add support for D-Link DIR-878 R1Igor Nazarov2022-03-192-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MT7615N (2.4GHz) and MT7615N (5Ghz) - Switch: 1 WAN, 4 LAN (Gigabit) - Buttons: Reset, WiFi Toggle, WPS - LEDs: Power, Internet, WiFi 2.4G WiFi 5G The R1 revision is identical to the A1 revision except - No Config2 Parition, therefore - factory partition resized to 64k from 128K - Firmware partition offset is 0x50000 not 0x60000 - Firmware partitions size increased by 64K - Firmware partition type is "denx,uimage", not "sge,uimage" - Padding of image creation "uimage-padhdr 96" removed Installation: Update to the last D-Link firmware through web-ui before OpenWRT installation then follow the instructions to patch your device using D-Link FailsafeUI. - D-Link FailsafeUI: Power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing, then jack into any lan port and manually assign a static IP address in 192.168.0.0/24 other than 192.168.0.1 (e.g. 192.168.0.2) and go to http://192.168.0.1 Flash with the factory image. Signed-off-by: Igor Nazarov <tigron.dev@gmail.com>
* kernel: bump 5.10 to 5.10.107John Audia2022-03-194-10/+3
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* ramips: add support for Beeline SmartBox FlashMikhail Zhilkin2022-03-196-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beeline SmartBox Flash is a wireless AC1300 (WiFi 5) router manufactured by Arcadyan company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB, Winbond W632GU6NB Flash: 128 MiB (NAND), Winbond W29N01HVSINF Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2 Wireless 5 GHz (MT7615DN): a/n/ac, 2x2 Ethernet: 3xGbE (WAN, LAN1, LAN2) USB ports: 1xUSB3.0 Button: 1 (Reset/WPS) LEDs: 1 RGB LED Power: 12 VDC, 1.5 A Connector type: Barrel Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2) OEM: Arcadyan WE42022 Installation ------------ 1. Place *factory.trx on any web server (192.168.1.2 in this example) 2. Connect to the router using telnet shell (no password required) 3. Save MAC adresses to U-Boot environment: uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \ awk '{print $5}') uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \ awk '{print $5}') uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \ awk '{print $5}') uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \ awk '{print $5}') 4. Ensure that MACs were saved correctly: uboot_env --get --name eth2macaddr uboot_env --get --name eth3macaddr uboot_env --get --name ra0macaddr uboot_env --get --name rax0macaddr 5. Download and write the OpenWrt images: cd /tmp wget http://192.168.1.2/factory.trx mtd_write erase /dev/mtd4 mtd_write write factory.trx /dev/mtd4 6. Set 1st boot partition and reboot: uboot_env --set --name bootpartition --value 0 reboot Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv bootpartition 1 reboot 2. Optional step. Upgrade the stock firmware with any version to overwrite the OpenWrt in Slot 1. MAC addresses ------------- +-----------+-------------------+----------------+ | Interface | MAC | Source | +-----------+-------------------+----------------+ | label | 30:xx:xx:51:xx:09 | No MACs was | | LAN | 30:xx:xx:51:xx:09 | found on Flash | | WAN | 30:xx:xx:51:xx:06 | [1] | | WLAN_2g | 30:xx:xx:51:xx:07 | | | WLAN_5g | 32:xx:xx:41:xx:07 | | +-----------+-------------------+----------------+ [1]: a. Label wasb't found neither in factory nor in other places. b. MAC addresses are stored in encrypted partition "glbcfg". Encryption key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack with saving of the MACs to u-boot-env during the installation was applied. c. Default Ralink ethernet MAC address (00:0C:43:28:80:36) was found in "Factory" 0xfff0. It's the same for all Smartbox Flash devices. OEM firmware also uses this MAC when initialazes ethernet driver. In OpenWrt we use it only as internal GMAC (eth0), all other MACs are unique. Therefore, there is no any barriers to the operation of several Smartbox Flash devices even within the same broadcast domain. Stock firmware image format --------------------------- +--------------+---------------+----------------------------------------+ | Offset | 1.0.15 | Description | +==============+===============+========================================+ | 0x0 | 5d 43 6f 74 | TRX magic "]Cot" | +--------------+---------------+----------------------------------------+ | 0x4 | 00 70 ff 00 | Length (reverse) | +--------------+---------------+----------------------------------------+ | | | htonl(~crc) from 0xc ("flag_version") | | 0x8 | 72 b3 93 16 | to "Length" | +--------------+---------------+----------------------------------------+ | 0xc | 00 00 01 00 | Flags | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of Kernel partition | | 0x10 | 1c 00 00 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of RootFS partition | | 0x14 | 00 00 42 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | 0x18 | 00 00 00 00 | Zeroes | +--------------+---------------+----------------------------------------+ | 0x1c | 27 05 19 56 … | Kernel data + zero padding | +--------------+---------------+----------------------------------------+ | | | RootFS data (starting with "hsqs") + | | 0x420000 | 68 73 71 73 … | zero padding to "Length" | +--------------+---------------+----------------------------------------+ | | | Some signature data (format is | | | | unknown). Necessary for the fw | | "Lenght" | 00 00 00 00 … | update via oem fw web interface. | +--------------+---------------+----------------------------------------+ | "Lenght" + | | TRX magic "HDR0". U-Boot is | | 0x10c | 48 44 52 30 | checking it at every boot. | +--------------+---------------+----------------------------------------+ | | | 1.00: | | | | Zero padding to ("Lenght" + 0x23000) | | | | 1.0.12: | | | | Zero padding to ("Lenght" + 0x2a000) | | "Lenght" + | | 1.0.13, 1.0.15, 1.0.16: | | 0x110 | 00 00 00 00 | Zero padding to ("Lenght" + 0x10000) | +--------------+---------------+----------------------------------------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-1920-57/+47
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 06:02:34 +0000