aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Fix setting of rx buffer lengthJohn Crispin2015-10-052-2/+3
| | | | | | | | | | | | | | The length of the DMA rx buffer was always set to 0 because the function for extracting the length was used to calculate the value for setting it. Instead the macro has to be split in a get and set function similar to the TX_DMA_(GET_|)PLEN(0|1) macro. No problem was noticed on MT7621a before this was changed and thus maybe it was hidden by different problem which is not yet fixed. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47115
* ramips: Allow to receive vlan over untag ports on MT7530John Crispin2015-10-051-3/+33
| | | | | | | | | | | | | | | | | | | | The MT7530 switch driver with enable_vlan set will automatically set all ports to the user port mode. The hardware will remove the incoming vlan tag on these ports and use it for its internal vlan. This is usually not wanted and makes it impossible to communicate via vlan over the switch in both directions. It is possible to configure a switch port to "transparent mode" when this port is only used as untag in the switch VLANs. This will disable the VLAN untagging of packets when they were received on this port. The tagging on "tag" ports based on the vlan id is still working. The transparent port mode cannot be used when a port is both used in a VLAN as "tag" and in another one as "untag" port. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47114
* ramips: Add build files for HiWiFi HC5x61 modelsJohn Crispin2015-10-052-0/+53
| | | | | | | | | | | | | | HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com <http://www.hiwifi.com/>. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Spaces -> Tabs 2: Removed some packages Signed-off-by: Xiaoning Kang <kangxn@163.com> SVN-Revision: 47113
* ramips: Add DTS files for HiWiFi HC5x61 modelsJohn Crispin2015-10-054-0/+299
| | | | | | | | | | | | | | HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Merged most stuff into dtsi file 2: Remove unnecessary empty lines. Signed-off-by: Xiaoning Kang <kangxn@163.com> SVN-Revision: 47112
* ramips: Add base-files for HiWiFi HC5x61 modelsJohn Crispin2015-10-055-10/+45
| | | | | | | | | | | | | | | HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Fixed model order 2: Remove manufacturer name from model name 3: Use a hacky but prettier way to get mac address. Signed-off-by: Xiaoning Kang <kangxn@163.com> SVN-Revision: 47111
* ar71xx: Correct WeIO board nameJohn Crispin2015-10-051-1/+1
| | | | | | | | Trivial parch to correct WeIO board name in the system. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> SVN-Revision: 47110
* target/mpc85xx: check if 'generic' subtarget for image file ↵John Crispin2015-10-051-2/+5
| | | | | | | | | | | cuImage.tl-wdr4900-v1 Only add 'cuImage.tl-wdr4900-v1' to KERNEL_IMAGES if the selected subtarget is 'generic'. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47109
* ar71xx: rename firmware for Chinese version of TL-WR941ND v6Rafał Miłecki2015-10-051-2/+3
| | | | | | | | | | | | | It seems there are two *different* versions on TL-WR941ND v6: Chinese and European one. Currently supported by OpenWrt is Chinese one. Rename firmware to make it clear. For details see: http://wiki.openwrt.org/toh/tp-link/tl-wr941nd https://forum.openwrt.org/viewtopic.php?id=59295 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47107
* lantiq: fix binutils 2.15.1 buildMatteo Croce2015-10-041-1/+1
| | | | SVN-Revision: 47105
* kernel: update 4.1 to 4.1.10Hauke Mehrtens2015-10-0440-135/+88
| | | | | | | | | | | | | | | | | | | Fixes a regression on spi flash devices (upstream commit 1583eaece6fa). Changelogs: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10 096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied upstream and dropped. Signed-off-by: Mathias Kresin <openwrt@kresin.me> [update from 4.1.9 to 4.1.10] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47104
* ralink: add irq to mt7628 gpio nodeJohn Crispin2015-10-011-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47076
* ralink: the mmc driver can now handle CD lines that are active lowJohn Crispin2015-10-011-4/+14
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47074
* ralink: speed selection was broken in spi-mt7621John Crispin2015-10-011-4/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47073
* uml: backport another upstream patch to fix compile errorsFelix Fietkau2015-09-282-1/+95
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47067
* uml: fix build with gcc 5Felix Fietkau2015-09-271-0/+44
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47062
* uml: update to linux 4.1Felix Fietkau2015-09-277-3977/+63
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47061
* brcm47xx: describe 300-fork_cacheflush.patch & 310-no_highpage.patchRafał Miłecki2015-09-272-0/+20
| | | | | | | | These were initially commited in r9285. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47058
* brcm47xx: describe 160-kmap_coherent.patchRafał Miłecki2015-09-271-0/+8
| | | | | | | | It was initially commited in r6642. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47057
* brcm47xx: describe 610-pci_ide_fix.patchRafał Miłecki2015-09-271-0/+27
| | | | | | | | It was initially commited in r20924. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47056
* bcm53xx: add early support for Linksys EA6300 V1Rafał Miłecki2015-09-263-0/+96
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47052
* kernel: crypto: fix ubsec_ssb.c compilation with 4.0+Rafał Miłecki2015-09-251-1/+1
| | | | | | | | | SSB_DEVTABLE_END was removed in 4.0 by upstream commit 673e2baaa6d9 ("treewide: Remove unnecessary SSB_DEVTABLE_END macro"). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47047
* kernel: backport some SPI layer improvements from 4.1 to 3.18, significantly ↵Felix Fietkau2015-09-243-0/+314
| | | | | | | | improves flash speed on ramips Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47045
* kernel: remove old "rootfs" splitterRafał Miłecki2015-09-243-78/+1
| | | | | | | | | | | | | A year ago I made this old splitter obsolete (see r42828), it's time to completely remove it now. For all this time we got these warnings: "Dedicated partitioner didn't create "rootfs_data" partition, please fill a bug report!" and "Support for built-in "rootfs_data" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT" but I'm not aware of any bug reports related to that. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47040
* oxnas: add platform_pre_upgrade for sysupgradeRafał Miłecki2015-09-241-0/+4
| | | | | | | | | | | | | | | | | We're in process of cleaning nand_do_platform_check. Currently it leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows all other targets making it finally possible to change nand_do_platform_check. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47039
* oxnas: drop some unused sysupgrade codeRafał Miłecki2015-09-241-9/+0
| | | | | | | | | | | | First of all platform_do_upgrade_phase2 doesn't seem to be defined anywhere. Other than that platform_do_upgrade is not likely to be ever called. There is a call to nand_do_platform_check which triggers nand_upgrade_stage1 call with "exit 0" in it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47038
* ar71xx: Add WeIO Board SupportFelix Fietkau2015-09-247-6/+187
| | | | | | | | | | Add support for WeIO board (http://we-io.net). This board is based on Carambola2 board form 8Devices. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups] SVN-Revision: 47036
* ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)Felix Fietkau2015-09-241-3/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47034
* imx6: disable ext2/ext3 filesystem support (ext4 is enough)Felix Fietkau2015-09-241-8/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47032
* uml: disable ext2/ext3 filesystem support (ext4 is enough)Felix Fietkau2015-09-242-4/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47031
* arm64: disable ext2/ext3 filesystem support (ext4 is enough)Felix Fietkau2015-09-241-2/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47030
* mxs: fixup permissions of image generation scriptsJo-Philipp Wich2015-09-232-0/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47029
* kernel: add a patch to fix crashes on pppoe disconnect/reconnectFelix Fietkau2015-09-224-4/+36
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47026
* mxs: re-work SD card image generationZoltan Herpai2015-09-214-25/+68
| | | | | | | | | | - Duckbill uses a different partitioning approach than standard FSL and Olimex - use new sdimage to integrate U-Boot into the SD card images Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 47021
* mxs: adopt SD card generation to fixed U-Boot pathZoltan Herpai2015-09-211-2/+2
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 47019
* omap: add Kernel 4.1Felix Fietkau2015-09-216-0/+1019
| | | | | | | | tested on Beagleboard C4 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47013
* arm64: switch to Kernel 4.1Felix Fietkau2015-09-183-14/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix Kernel dts subdir location - enable virtio networking we are using -M virt which supports virtio devices changes in symbols due to make kernel_oldconfig: - CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y : removed fix security: upstream id: d1fd836dcf00d2028c700c7e44d2c23404062c90 - CONFIG_ARM64_CPU_SUSPEND: removed commit id: af3cfdbf56b91785650f54e7c9a899d814b4b9fb - CONFIG_ARM64_PGTABLE_LEVELS=3 : renamed PGTABLE_LEVELS commit id: 9f25e6ad58e1fb3b4d441e4c55635c4598a6fa94 - CONFIG_GENERIC_CLOCKEVENTS_BUILD=y : removed upstream commit id: 9f083b74df3a7eaa100b456f2dc195512daf728e -# CONFIG_PREEMPT_RCU: unnecessary unknown remove reasons: -CONFIG_GENERIC_IOMAP=y -# CONFIG_POWER_RESET_GPIO is not set -# CONFIG_POWER_RESET_GPIO_RESTART is not set -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_SYSCON is not set -# CONFIG_XEN is not set tested and boot, networking work with qemu Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47005
* kernel: fix dependencies of the sock_diag debloat patch (#20544)Felix Fietkau2015-09-182-0/+40
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46997
* kernel: solos-pci: Increase headroom on received packetsFelix Fietkau2015-09-172-0/+108
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46993
* kernel: ipv6: ip6_fragment: fix headroom tests and skb leakFelix Fietkau2015-09-173-1/+203
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46992
* x86/geode: enable DMI and Geos support (fixes #20512)Felix Fietkau2015-09-171-0/+5
| | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 46986
* x86: fix Geode LX timekeeping (#20531)Felix Fietkau2015-09-171-0/+61
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46985
* kernel: remove lantiq specific ATM API hacks and their kernel space users ↵Felix Fietkau2015-09-173-42/+0
| | | | | | | | (fixes #20523) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46984
* kernel: unbreak atm ABI for 4.0 and 4.1John Crispin2015-09-162-14/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46983
* kernel: properly guard the lantiq atm abi hack with an ifdefJohn Crispin2015-09-161-1/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46981
* kernel 3.18/kernel 4.0/kernel 4.1: add missing symbolJohn Crispin2015-09-163-0/+3
| | | | | | | | deactivate NET_SCTPPROBE just like NET_TCPPROBE Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46974
* x86: add missing symbolJohn Crispin2015-09-161-0/+1
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46973
* ar71xx: add support for ap152 reference boardJohn Crispin2015-09-166-0/+202
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46972
* ath79: dev-eth: fix QCA9561 set phy interface mode and maskJohn Crispin2015-09-161-2/+7
| | | | | | | | | | QCA9563 and QCA9561 are two series of Qualcomm SoC Dragonfly. The only different is QCA9563 w/o internal switch. It has one GMAC with SGMII interface. But they have the same device ID(0x1150). So they share the same codes. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46971
* ar71xx: uci-defaults: fix ap143 to appropriate groupJohn Crispin2015-09-161-1/+1
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46970
* kernel: unbreak the atm abiJohn Crispin2015-09-161-7/+7
| | | | | | | | | the lantiq dsl hack to struct atm_trafprm broke the ABI fix this by moving the variables to the end of the struct Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46964
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 03:31:18 +0000