aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* x86: Add definitions for APU6 platformPhilip Prindeville2023-01-111-0/+280
| | | | | | | The board is similar to an APU4 except it has an SFP cage for eth0. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh]
* at91: sama7: fix racy SD card image generationPetr Štetiar2023-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | We've few low spec (make -j3) build workers attached to the 22.03 buildbot instance which from time to time exhibit following build failure during image generation: + dd bs=512 if=root.ext4 of=openwrt-22.03-snapshot-r20028-43d71ad93e-at91-sama7-microchip_sama7g5-ek-ext4-sdcard.img.gz.img seek=135168 conv=notrunc dd: failed to open 'root.ext4': No such file or directory Thats likely due to the fact, that on buildbots we've `TARGET_PER_DEVICE_ROOTFS=y` which produces differently named filesystem image in the SD card image target dependency chain: make_ext4fs -L rootfs ... root.ext4+pkg=68b329da and that hardcoded root.ext4 becomes available from other target in the later stages. So lets fix this issue by using IMAGE_ROOTFS Make variable which should contain proper path to the root filesystem image. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "TODROP: test for ipq4019 target"Christian Marangi2023-01-111-1/+1
| | | | | | | | This reverts commit 4eb587f7e0a49b9c404857b18571f45981b3a7fc. Pushed by mistake while merging a pr using script. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* TODROP: test for ipq4019 targetChristian Marangi2023-01-111-1/+1
| | | | | | COMMIT TO DROP Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: refresh upstreamed patch with kernel version tagChristian Marangi2023-01-1022-497/+782
| | | | | | | | | Refresh upstreamed patch with kernel version tag and replace them with the upstream version. For krait-cc patch rework them with the upstream changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* sunxi: switch to kernel 5.15Stijn Tintel2023-01-0912-1253/+1
| | | | | | | | | The testing kernel has been available since early 2022, and is running fine for several people. Let's switch to it by default. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Karl Palsson <karlp@etactica.com> Tested-by: Jan-Niklas Burfeind <openwrt@aiyionpri.me>
* qoriq: drop unused kernel configStijn Tintel2023-01-091-384/+0
| | | | | | | | While switching qoriq to kernel 5.15, the config for kernel 5.10 was left behind. Drop it. Fixes: 230f2fccd14e ("qoriq: switch to kernel 5.15") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* layerscape: Add CONFIG_NVMEM_LAYERSCAPE_SFP kernel configuration optionHauke Mehrtens2023-01-081-0/+1
| | | | | | | | The kernel configuration option is now available on kernel 5.10 and 5.15, add it to the config for 5.15 too. Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: Add CONFIG_NVMEM_MICROCHIP_OTPC kernel configuration optionHauke Mehrtens2023-01-083-0/+3
| | | | | | | | The kernel configuration option is now available on kernel 5.10 and 5.15, add it to the config for 5.15 too. Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Refresh kernel patchesHauke Mehrtens2023-01-081-1/+1
| | | | | | | Make the patches apply cleanly again. Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: dgs-1210-10mp: add full sfp descriptionDaniel Groth2023-01-082-4/+108
| | | | | | | | Added the full SFP description for both SFP ports (lan9, 10) on D-Link DGS-1210-10MP, which enables hot-plug detection of SFP modules. Added the patch to both kernel 5.10 and 5.15 dts files. Signed-off-by: Daniel Groth <flygarn12@gmail.com>
* ramips: do not use GPIO function on switch pins on certain devicesArınç ÜNAL2023-01-084-109/+0
| | | | | | | | | | | | | | | | | | | | | The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has got a function, by default, which does the same thing as the netdev trigger. Because of bridge offloading on DSA, the netdev trigger won't see the frames between the switch ports whilst the default function will. Do not use the GPIO function on switch pins on devices that fall under this category. Keep it for: mt7621_belkin_rt1800.dts: There's only one LED which is for the wan interface and there's no bridge offloading between the "wan" interface and other interfaces. mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan" and "lan" interfaces. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add support for D-Link DAP-X1860 A1Sebastian Schaper2023-01-076-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* kernel: backport of changes & helpersRafał Miłecki2023-01-0718-5/+2407
| | | | | | This code is required for upcoming NVMEM changes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-073-65/+65
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: add stand-alone MT7915 firmware packageShiji Yang2023-01-072-28/+28
| | | | | | | | | The mt7915e driver supports MT7915, MT7916 and MT7986 chips. And Only MT7915 series chips need the MT7915 firmware. To save storage, extract them from the common code package and create a new package to provide the firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: use default lzma dictionary size for better performanceShiji Yang2023-01-071-1/+0
| | | | | | | | | | | | limit dictionary size patch was introduced to solve the well known "LZMA ERROR 1 - must RESET board to recover" error. 09b6755946409d8fd8 "ramips: limit dictionary size for lzma compression" It seems that it has failed recently and we can use lzma loader to fix this error by adding "$(Device/uimage-lzma-loader)". So just remove it to use the default parameter -d24 for a higher compression ratio. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: Refresh kernel patchesHauke Mehrtens2023-01-074-4/+4
| | | | | | | Make the patches apply cleanly again. Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix bugs added with mac-address-ascii supportRafał Miłecki2023-01-072-40/+38
| | | | | | | | | | | | | | | | | | | | 1. Check for -EPROBE_DEFER If it occurs we have to return immediately. Trying other properties could result in another error and ignoring -EPROBE_DEFER which has a special meaning. 2. Check for read result Assuming property->read() success can result in NULL pointer dereference. It happens e.g. for "mac-address" with NVMEM cell containing invalid MAC. 3. Simplify code Don't move cell reading & nvmem_cell_put() into a loop. Simplify loop code. Fixes: ecd81de7a5ab ("ath79: add nvmem cell mac-address-ascii support") Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* realtek: don't relocate kernel on HPE 1920 seriesJan Hoffmann2023-01-072-16/+0
| | | | | | | This is no longer needed now that the kernel is built with a load address that matches the one hard-coded in the bootloader. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ath79: combine UniFi AC dual firmware-partitionsDavid Bauer2023-01-072-8/+3
| | | | | | | | | | | | | | | In order to maximize the available space on UniFi AC boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single kernel partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: combine USW-Flex dual firmware-partitionsDavid Bauer2023-01-072-7/+3
| | | | | | | | | | | | | | | In order to maximize the available space on USW-Flex boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single kernel partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: combine OCEDO dual firmware-partitionsDavid Bauer2023-01-074-24/+9
| | | | | | | | | | | | | | | In order to maximize the available space on OCEDO boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single OS partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-079-11/+11
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update nvmem subsystem to the latest upstreamRafał Miłecki2023-01-0695-40/+7448
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: harmonize GL.iNet GL-MV1000 MTD partitions layout with vendorEnrico Mioso2023-01-061-1/+19
| | | | | | | The GL-MV1000 ships with a 16MB spi-nor flash, containing a copy of the stock GL.iNet firmware. Add the corresponding flash areas, so our view matches the one of the in-flash stock firmware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* octeontx: add sqaushfs and ramdisk to featuresTim Harvey2023-01-061-1/+1
| | | | | | | Add squashfs and ramdisk to features as these are commonly used images for the octeontx. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: add support for Cudy M1800Leon M. Busch-George2023-01-063-4/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications SoC: MT7621 CPU: 880 MHz Flash: 32 MiB RAM: 256 MiB WLAN: MT7915 WiFi 6 (2.4/5 GHz) Ethernet: 2x Gbit ports MAC LAN b4:4b:d6:2e:c7:b0 (label) WAN b4:4b:d6:2e:c7:b1 WiFi 2.4 00:0c:43:26:46:08 WiFi 5 00:0c:43:26:59:97 Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* kernel: add patch to support en25qh256aLeon M. Busch-George2023-01-066-4/+102
| | | | | | | | | | | | | The EN25QH256A variant of the EN25QH256 doesn't initialize correctly from SFDP alone and only accesses memory below 8m (addr_width is 4 but read_opcode takes only 3 bytes). Set SNOR_F_4B_OPCODES if the flash chip variant was detected using hwcaps. The fix submitted upstream uses the PARSE_SFDP initializer that is not available in the kernel used with Openwrt. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* ath79: tiny: Do not build TPLink WPA8630Pv2 by defaultJoe Mullally2023-01-061-0/+1
| | | | | | | | | | 22.03.1+ and snapshot builds no longer fit the 6M flash space available for these models. This disables failing buildbot image builds for these devices. Images can still be built manually with ImageBuilder. Signed-off-by: Joe Mullally <jwmullally@gmail.com>
* target/imagebuilder: add help text and rename whatdepends to package_whatdepensFlorian Eckert2023-01-061-2/+10
| | | | | | | Add the command `package_whatdepends` to show all package that have a dependency to this packages. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: update help text for manifest targetFlorian Eckert2023-01-061-1/+2
| | | | | | | - Add a help text for the manifest command. - Unify command detail help text to use `manifest`. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: change help text for image buildFlorian Eckert2023-01-061-1/+1
| | | | | | Using command `image` to unify help text. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: add depends target to show all package that gets installedFlorian Eckert2023-01-061-1/+17
| | | | | | | | This commits adds the makefile targets `depends` this wrapper is a call to `opkg depends`. This command shows which runtime dependencies exist if this package is installed into the image. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ath79: convert UBNT Aircube AC WiFis to nvmem-cellsStefan Kalscheuer2023-01-062-13/+26
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* ramips: add support for Keenetic KN-1613Maxim Anisimov2023-01-064-4/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keenetic KN-1613 is a 2.4/5 Ghz band 11ac (Wi-Fi 5) router, based on MT7628AN. Specification: - System-On-Chip: MT7628AN - CPU/Speed: 580 MHz - Flash-Chip: Winbond w25q256 - Flash size: 32768 KiB - RAM: 128 MiB - 4x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - Wireless No1 (2T2R): SoC Built-in 2.4 GHz 802.11bgn - Wireless No2 (2T2R): MT7613BE 5 GHz 802.11ac - 4x LED, 2x button, 1x mode switch Notes: - The device supports dual boot mode - The firmware partitions were concatinated into one - The FN button led indicator has been reassigned as the 2.4GHz wifi indicator. Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-keenetic_kn-1613-squashfs-factory.bin" to "KN-1613_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power led start blinking. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: enable mtd virtual concat support for mt76x8 subtargetMaxim Anisimov2023-01-062-0/+2
| | | | | | This is required for upcoming Keenetic KN-1613 support Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* generic: fix silicon labs spidev bindingsVincent Tremblay2023-01-0610-40/+111
| | | | | | | | | | | | | | | Fix Silicon Labs bindings in the spidev driver Some bindings for Silicon Labs chips already exists upstream. These bindings can be found in trivial-devices.yaml. The existing bindings are using "silabs" instead of "siliconlabs" to identify the manufacturer. This commit add two submitted patches for silabs chips and rename the manufacturer in the different DTS for more coherence. Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* ath79: add support for Fortinet FAP-221-BMichael Pratt2023-01-068-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: U2M-CAP4100AG Fortinet FAP-221-B is an indoor access point with 1 Gb ethernet port, dual-band wireless, internal antenna plates, and 802.3at PoE+ Hardware and board design from Senao **Specification:** - AR9344 SOC 2G 2x2, 5G 2x2, 25 MHz CLK - AR9382 WLAN 2G 2x2 PCIe, 40 MHz CLK - AR8035-A PHY RGMII, PoE+ IN, 25 MHz CLK - 16 MB FLASH MX25L12845EMI-10G - 2x 32 MB RAM W9725G6JB-25 - UART at J11 populated, 9600 baud - 6 LEDs, 1 button power, ethernet, wlan, reset Note: ethernet LEDs are not enabled because a new netifd hotplug is required in order to operate like OEM. Board has 1 amber and 1 green for each of the 3 case viewports. **MAC addresses:** 1 MAC Address in flash at end of uboot ASCII encoded, no delimiters Labeled as "MAC Address" on case OEM firmware sets offsets 1 and 8 for wlan eth0 *:1e uboot 0x3ff80 phy0 *:1f uboot 0x3ff80 +1 phy1 *:26 uboot 0x3ff80 +8 **Serial Access:** Pinout: (arrow) VCC GND RX TX Pins are populated with a header and traces not blocked. Bootloader is set to 9600 baud, 8 data, 1 stop. **Console Access:** Bootloader: Interrupt boot with Ctrl+C Press "k" and enter password "1" OR Hold reset button for 5 sec during power on Interrupt the TFTP transfer with Ctrl+C to print commands available, enter "help" OEM: default username is "admin", password blank telnet is available at default address 192.168.1.2 serial is available with baud 9600 to print commands available, enter "help" or tab-tab (busybox list of commands) **Installation:** Use factory.bin with OEM upgrade procedures OR Use initramfs.bin with uboot TFTP commands. Then perform a sysupgrade with sysupgrade.bin **TFTP Recovery:** Using serial console, load initramfs.bin using TFTP to boot openwrt without touching the flash. TFTP is not reliable due to bugged bootloader, set MTU to 600 and try many times. If your TFTP server supports setting block size, higher block size is better. Splitting the file into 1 MB parts may be necessary example: $ tftpboot 0x80100000 image1.bin $ tftpboot 0x80200000 image2.bin $ tftpboot 0x80300000 image3.bin $ tftpboot 0x80400000 image4.bin $ tftpboot 0x80500000 image5.bin $ tftpboot 0x80600000 image6.bin $ bootm 0x80100000 **Return to OEM:** The best way to return to OEM firmware is to have a copy of the MTD partitions before flashing Openwrt. Backup copies should be made of partitions "fwconcat0", "loader", and "fwconcat1" which together is the same flash range as OEM's "rootfs" and "uimage" by loading an initramfs.bin and using LuCI to download the mtdblocks. It is also possible to extract from the OEM firmware upgrade image by splitting it up in parts of lengths that correspond to the partitions in openwrt and write them to flash, after gzip decompression. After writing to the firmware partitions, erase the "reserved" partition and reboot. **OEM firmware image format:** Images from Fortinet for this device ending with the suffix .out are actually a .gz file The gzip metadata stores the original filename before compression, which is a special string used to verify the image during OEM upgrade. After gzip decompression, the resulting file is an exact copy of the MTD partitions "rootfs" and "uimage" combined in the same order and size that they appear in /proc/mtd and as they are on flash. OEM upgrade is performed by a customized busybox with the command "upgrade". Another binary, "restore" is a wrapper for busybox's "tftp" and "upgrade". Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: allow skipping hash for Senao sysupgradeMichael Pratt2023-01-064-28/+30
| | | | | | | | | | | | | | Some vendors of Senao boards have a similar flash layout situation that causes the need to split the firmware partition and use the lzma-loader, but do not store checksums of the partitions or otherwise do not even have a uboot environment partition. This adds simple shell logic to skip that part. Also, simplify some lines and variable usage. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: use lzma-loader for Senao initramfs imagesMichael Pratt2023-01-061-0/+1
| | | | | | | | | Some vendors of Senao boards have put a bootloader that cannot handle both large gzip or large lzma files. There is no disadvantage by doing this for all of them. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* kernel: 5.10: update nvmem subsystem to the 5.15 stateRafał Miłecki2023-01-0631-15/+1733
| | | | | | | This allows cleanly backporting more recent stuff that's important for OpenWrt. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.10 to 5.10.162John Audia2023-01-061-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: 5.15: Improve error handling in rtl838x_pie_rule_write()Pascal Ernster2023-01-051-6/+10
| | | | | | | In target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c, make rtl838x_pie_rule_write() return non-zero value case of error. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: 5.15: Improve rtl838x dsa driver error handlingPascal Ernster2023-01-051-24/+32
| | | | | | | | | Make sure functions calling rtl838x_smi_wait_op() return its return value in target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c. This brings the code style in line with the rtl839x implementation. Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: return correct error value for phy opsPascal Ernster2023-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | A behavioural change was introduced with commit 758c88b96963 ("realtek: Whitespace and codestyle cleanup") causing rtl838x_read_phy() and rtl838x_write_phy() to unconditionally return -ETIMEDOUT. As a result, probing the device during boot fails: Error setting up netdev, freeing it again. rtl838x-eth: probe of 1b00a300.ethernet failed with error -5 Fix the bootloop caused by this regression with kernel 5.15 on rtl838x devices, by properly returning 0 on success. Tested on a Netgear GS108T v3, a Netgear GS310TP v1, a Zyxel GS1900-8HP v1 and an HPE 1920-8G. Fixes: 758c88b969639d0e6b684669d2e54dd1be3102f4 ("realtek: Whitespace and codestyle cleanup") Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Migrate to upstream generic MIPS addressesOlliver Schinagl2023-01-053-4/+4
| | | | | | | | | | Upstream generic MIPS uses 0x80100000 and 0x80100400 for the LOADADDR and ENTRY addresses. As we do not want to diverge from upstream and patch upstream when not needed, adjust our addresses as well to be future proof. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: Jan Hoffmann <jan@3e8.eu> # HPE 1920-8G, HPE 1920-48G
* ramips: add Unielec U7621-06 32M build targetIgnas Poklad2023-01-052-0/+90
| | | | | | | | | Add 32M build target Rest of the details as per commit 46ab81e405d2 ("ramips add support for UniElec U7621-06") Signed-off-by: Ignas Poklad <ignas2526@gmail.com>
* ath79: convert Netgear WNDAP360 WiFis to nvmem-cellsNick Hainke2023-01-043-31/+32
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-041-1/+4
| | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 04:52:45 +0000