aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* brcm47xx: board detection WNDR3400v2Hauke Mehrtens2013-02-253-4/+9
| | | | | | | | | | | | | | | | WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#". CFE and NVRAM contain different vars - example: CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0 CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0 Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 (and on wikidevi for example) Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 35790
* ar71xx: add profile and build image fot the TL-WA830RE v1 boardGabor Juhos2013-02-252-0/+12
| | | | | | | | | | | Added support for the TP-LINK TL-WA830RE v1 Range Extender. Based on the WA901ND v1 support. Hardware IDs checked against original firmware. Patch was successfully tested on hardware. Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35789
* ar71xx: add model detection for the TL-WA830RE boardGabor Juhos2013-02-251-0/+3
| | | | | | | Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35788
* brcm47xx: use same board detection code as kernel 3.8Hauke Mehrtens2013-02-241-24/+24
| | | | SVN-Revision: 35770
* adm5120: add support for 3.8Gabor Juhos2013-02-2417-0/+1038
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35769
* adm5120: remove __dev{init,exit} annotationsGabor Juhos2013-02-243-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35768
* adm5120: remove a superfluous patchGabor Juhos2013-02-221-13/+0
| | | | | | | | | | | | | | | The NO_IRQ symbol is not used by the amba core since upstream commit: dfb85185bda373a70409c70c2632b02fb0f8f449 AMBA: get rid of last two uses of NO_IRQ This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35748
* adm5120: avoid warning caused by wrong AMBA irq valuesGabor Juhos2013-02-221-2/+2
| | | | | | | | | | | | | | | | | | | The amba core throws a warning if -1 is used as an irq value since upstream commit: 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3 ARM: amba: make use of -1 IRQs warn Make the core warn about the use of -1 (NO_IRQ) Cange the value of the unused IRQs to zero for the UART devices to get rid of the warning. Based on #12729. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35747
* cns21xx: add support for 3.8Gabor Juhos2013-02-2119-0/+7843
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35737
* mpc83xx: add support for 3.8Gabor Juhos2013-02-2111-0/+4547
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35736
* ppc44x: add support for 3.8Gabor Juhos2013-02-213-0/+300
| | | | | | | | Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35735
* ppc40x: add support for 3.8Gabor Juhos2013-02-218-0/+2043
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35734
* mpc85xx: add user-space support for the TL-WDR4900 v1Gabor Juhos2013-02-219-0/+320
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35733
* mpc85xx: update 3.8 configGabor Juhos2013-02-211-5/+18
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35732
* ar71xx: fix MAC address assignment on the DIR-825-Bx boardsGabor Juhos2013-02-211-7/+10
| | | | | | | | | | | Use the same MAC addresses as the original firmware. Based on a patch from #10421. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Gabor Varga <vargagab@gmail.com> SVN-Revision: 35730
* mpc85xx: add support for 3.8Gabor Juhos2013-02-217-0/+988
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35729
* ar71xx: add support for 3.8Gabor Juhos2013-02-21101-0/+9696
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35728
* atheros: add support for linux kernel v3.8Gabor Juhos2013-02-2113-0/+6528
| | | | | | | | | | | | | | | | | | | | | This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35727
* linux/3.8: add missing config symbolsGabor Juhos2013-02-211-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35726
* bcm63xx: Fix sysupgrade for tag-version 7 and 8Jonas Gorski2013-02-211-1/+1
| | | | | | | | Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724
* generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLANJonas Gorski2013-02-211-4/+2
| | | | | | | | | | Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723
* generic: b53: remove empty spacesJonas Gorski2013-02-211-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722
* ramips: print image build warnings/errors to stderrJonas Gorski2013-02-211-6/+6
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721
* cns21xx: print image build warnings/errors to stderrJonas Gorski2013-02-211-4/+4
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35720
* ar71xx: print image build warnings/errors to stderrJonas Gorski2013-02-211-5/+5
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35719
* mpc85xx: add kmod-leds-gpio to the default packagesGabor Juhos2013-02-211-1/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35708
* mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900Gabor Juhos2013-02-211-1/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35707
* brcm47xx: do not use vlan0 any more.Hauke Mehrtens2013-02-203-43/+43
| | | | | | | | The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704
* mpc85xx: add kernel support for the TL-WDR4900 v1 boardGabor Juhos2013-02-202-0/+571
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35690
* mpc85xx: use a foreach loop to copy boot imagesGabor Juhos2013-02-201-1/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35689
* ar71xx: remove __dev{init,exit} annotations from kernel filesGabor Juhos2013-02-1913-34/+34
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35687
* linux/3.8: add missing Kconfig symbolsGabor Juhos2013-02-191-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35686
* mpc85xx: add default profileGabor Juhos2013-02-191-0/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35677
* mpc85xx: add gpio-keys to OF match tableGabor Juhos2013-02-191-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35676
* mpc85xx: enable squashfs featureGabor Juhos2013-02-192-1/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35675
* mpc85xx: add swconfig to default packagesGabor Juhos2013-02-191-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35674
* kernel: update linux 3.8-rcX to 3.8Gabor Juhos2013-02-199-11/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35672
* x86/rdc: migrate to common led helper functionsFlorian Fainelli2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35664
* rb532: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35663
* cobalt: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-15/+12
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35662
* brcm63xx: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-49/+2
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661
* au1000: migrate to common led helper functionsFlorian Fainelli2013-02-181-15/+11
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35660
* ar7: migrate to common led helper functionsFlorian Fainelli2013-02-181-33/+27
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35659
* ramips: migrate to common led helper functionsGabor Juhos2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652
* cns21xx: migrate to common led helper functionsGabor Juhos2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35651
* ar71xx: migrate to common led helper functionsGabor Juhos2013-02-181-29/+5
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35650
* adm5120: migrate to common led helper functionsGabor Juhos2013-02-181-32/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35649
* kernel: update linux 3.7 to 3.7.9Gabor Juhos2013-02-1715-15/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644
* generic: ar8216: cleanup function/variable namesGabor Juhos2013-02-171-110/+110
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35642
* generic: ar8216: rename struct ar8216_priv to ar8xxx_privGabor Juhos2013-02-171-94/+94
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35641
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 19:18:20 +0000