aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 4.9 to 4.9.187Koen Vandeputte2019-08-0618-270/+125
| | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 021-bridge-multicast-to-unicast.patch Remove upstreamed: - 001-um-Allow-building-and-running-on-older-hosts.patch - 003-um-Fix-check-for-_xstate-for-older-hosts.patch Fixes: - CVE-2019-10207 - CVE-2019-13648 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: wpj531: fix SIG1/RSS1 LED GPIOLeon M. George2019-08-041-1/+1
| | | | | | | | | | | | | | | In commit 6c937df749c7 ("ar71xx: wpj531: fix GPIOs for LED") wrong GPIO 13 for SIG1/RSS1 LED was commited, the correct GPIO number for this LED is 12. It's listed in "Hardware Guide - wpj531 7A06 (02/07/2019)" as GPIO12/RSS1 on the LED header and same GPIO 12 is used in the vendor's SDK as well. Fixes: 6c937df749c7 ("ar71xx: wpj531: fix GPIOs for LED") Signed-off-by: Leon M. George <leon@georgemail.eu> [commit subject/message facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c070662980047838004b83f7af59e7015d3c7922)
* ar71xx: fix HiveAP 121 PLL for 1000MDavid Bauer2019-08-011-1/+1
| | | | | | | | | | | | | The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds, leading to packet-loss. 10M and 100M work fine. This commit sets the Gigabit Ethernet PLL value to the correct value, fixing packet loss. Confirmed with iperf and floodping. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit cb49e46a8a4526d86270ced3ba3aa90225ca82d7)
* kernel: bump 4.14 to 4.14.134Koen Vandeputte2019-07-312-6/+6
| | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3846 - CVE-2019-3900 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.186Koen Vandeputte2019-07-3118-39/+39
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3846 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: bump SDMA firmware to 3.5Koen Vandeputte2019-07-311-0/+0
| | | | | | | | | | | - add uart rom script address in header of sdma firmware to support the uart driver of latest kernel working well while old firmware assume ram script used for uart driver as NXP internal legacy kernel. - add multi-fifo SAI/PDM scripts. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 819b6345a206ad182dd3c2d786a3d7f04e33f751)
* imx6: bump sdma firmware to 3.4Koen Vandeputte2019-07-311-0/+0
| | | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit fa8d5ad21bd7f12c2d9c3580226d0c708255e55d)
* kernel: bump 4.14 to 4.14.132Koen Vandeputte2019-07-094-7/+7
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: fix mt7620 pinmux for second SPIMathias Kresin2019-07-012-4/+4
| | | | | | | | | | | | The mt7620 doesn't have a pinmux group named spi_cs1. The cs1 is part of the "spi refclk" group. The function "spi refclk" enables the second chip select. On reset, the pins of the "spi refclk" group are used as reference clock and GPIO. Signed-off-by: Mathias Kresin <dev@kresin.me> (cherry picked from commit 3601c3de23f15e2735adc4becdca14c803b6b1a5)
* kernel: bump 4.14 to 4.14.130Koen Vandeputte2019-06-257-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.129Koen Vandeputte2019-06-243-5/+5
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.183Koen Vandeputte2019-06-249-59/+14
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 010-revert-staging-vc04_services-prevent-integer-overflow-in-create_pagelist.patch Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm2708: Revert "staging: vc04_services: prevent integer overflow in ↵Matthias Schiffer2019-06-203-3/+48
| | | | | | | | | | | create_pagelist()" The bump to 4.9.181 broke build for bcm2708 and bcm2709. Revert the offending patch. The same revert is also queued for the next upstream 4.9.y release. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* gemini: 4.14: Fix up DNS-313 compatible stringLinus Walleij2019-06-201-1/+1
| | | | | | | | | It's a simple typo in the DNS file, which was pretty serious. No scripts were working properly. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [integrate into openwrt target]
* kernel: bump 4.14 to 4.14.128Koen Vandeputte2019-06-205-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.127Koen Vandeputte2019-06-182-3/+3
| | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-11479 - CVE-2019-11478 - CVE-2019-11477 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.182Koen Vandeputte2019-06-187-12/+12
| | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-11479 - CVE-2019-11478 - CVE-2019-11477 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "ipq806x: fix EA8500 switch control"Petr Štetiar2019-06-181-18/+4
| | | | | | | | | | | | | | | There is a problem with the EA8500, the switch will not work after soft reboot, the only way to get it working again is to power cycle it manually. There are probably several issues in the play, it's quite hard to fix it without having access to the actual device, so I don't see any other option now, then revert the offending commit. Ref: PR#2047 Fixes: FS#2168 ("Switch no longer work after restart on Linksys EA8500") Reported-by: Adam <424778940z@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 4.14 to 4.14.126Koen Vandeputte2019-06-181-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mvebu: fixes commit f63a1caf22cbGeorge Amanakis2019-06-181-1/+1
| | | | | | | | | | | | err_free_stats has been deprecated. Replace with err_netdev. Compile-tested on: mvebu Runtime-tested on: mvebu Fixes: f63a1caf22cb ("kernel: bump 4.14 to 4.14.125") Signed-off-by: George Amanakis <gamanakis@gmail.com> [altered hashes] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: backport 4.18 patch adding DMI_PRODUCT_SKURafał Miłecki2019-06-171-0/+57
| | | | | | | | | | It's needed for applying some hardware quirks. This fixes: drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c:60:20: error: 'DMI_PRODUCT_SKU' undeclared here (not in a function); did you mean 'DMI_PRODUCT_UUID'? DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"), Fixes: 2cd234d96bd7 ("mac80211: brcm: backport remaining brcmfmac 5.2 patches") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 4d11c4c3784196ed3e5b5a1f81fa415d99ef32b0)
* kernel: mt29f_spinand: fix memory leak during page programMantas Pucka2019-06-151-0/+90
| | | | | | | | | Memory is allocated with devm_kzalloc() on every page program and leaks until device is closed (which never happens). Convert to kzalloc() and handle error paths manually. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* kernel: bump 4.14 to 4.14.125Koen Vandeputte2019-06-1210-31/+32
| | | | | | | | | | | | | Refreshed all patches. Altered patches: - 403-net-mvneta-convert-to-phylink.patch - 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch Compile-tested on: cns3xxx, imx6, mvebu Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.181Koen Vandeputte2019-06-128-14/+14
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: re-add bridge allow reception on disabled portChen Minqiang2019-06-072-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "bridge allow reception on disabled port" implementation was broken after these commits: b765f4be407c ("kernel: bump 4.14 to 4.14.114") 456f486b53a7 ("kernel: bump 4.9 to 4.9.171") This leads to issues when for example WDS is used, tied to a bridge: [ 96.503771] wlan1: send auth to d4:5f:25:eb:09:82 (try 1/3) [ 96.517956] wlan1: authenticated [ 96.526209] wlan1: associate with d4:5f:25:eb:09:82 (try 1/3) [ 97.086156] wlan1: associate with d4:5f:25:eb:09:82 (try 2/3) [ 97.200919] wlan1: RX AssocResp from d4:5f:25:eb:09:82 (capab=0x11 status=0 aid=1) [ 97.208706] wlan1: associated [ 101.312913] wlan1: deauthenticated from d4:5f:25:eb:09:82 (Reason: 2=PREV_AUTH_NOT_VALID) It seems upstream introduced a new patch, [1] so we have to reimplement these patches properly: target/linux/generic/pending-4.9/150-bridge_allow_receiption_on_disabled_port.patch target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch [1] https://lkml.org/lkml/2019/4/24/1228 Fixes: b765f4be407c ("kernel: bump 4.14 to 4.14.114") Fixes: 456f486b53a7 ("kernel: bump 4.9 to 4.9.171") Signed-off-by: Chen Minqiang <ptpt52@gmail.com> [updated commit message and title] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.123Koen Vandeputte2019-06-032-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.122Koen Vandeputte2019-06-036-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.179Koen Vandeputte2019-06-033-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* apm821xx: backport accepted linux-crypto patchesChristian Lamparter2019-06-0110-0/+1149
| | | | | | | | | Rather than wait until the patches hit vanilla and get backported via the stable kernel, this patch patches the crypto4xx driver with the latest fixes from the upstream linux-crypto tree. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Fix arc kernel 4.14 buildHauke Mehrtens2019-05-301-10/+10
| | | | | | | | | This fixes a patch for the ARC architecture. This was found by the build bot. Fixes: 810ee3b84a2b ("kernel: bump 4.14 to 4.14.104") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm63xx: drop linux,part-probe usage where possibleJonas Gorski2019-05-2387-180/+5
| | | | | | | | | | | | | It was present as 4.4 compatibility, but since we now use 4.9 or later with the new upstream solution, we don't need it anymore. This also fixes a serious regression introduced by ac9bcefa3b04, which changed the precedence of linux,part-probe and the new-type partitions node compatible string, causing caldata partitions to be overwritten. Fixes: ac9bcefa3b04 ("kernel: use V10 of mtd patchset adding support for "compatible" string") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> (cherry picked from commit 7880a6f7fee89efe9e5e4c707b59ba45f02e21cf)
* brcm63xx: drop own implementation of DT partitions in favour of upstreamJonas Gorski2019-05-234-320/+0
| | | | | | | The binding works the same, so we can just drop the revert and the patch. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> (cherry picked from commit abb28bec251a0b243dff87f87d09763792128349)
* kernel: bump 4.14 to 4.14.120Koen Vandeputte2019-05-2132-247/+247
| | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 0067-generic-Mangle-bootloader-s-kernel-arguments.patch - 006-mvebu-Mangle-bootloader-s-kernel-arguments.patch - 996-generic-Mangle-bootloader-s-kernel-arguments.patch Compile-tested on: cns3xxx, imx6, mvebu Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.177Koen Vandeputte2019-05-213-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Fix network setup for TP-Link Archer C25 v1Adrian Schmutzler2019-05-191-9/+9
| | | | | | | | | Network for the Archer C25 v1 is set up without switch for no obvious reason. The LED setup is even done switch-based. This patch changes network setup so a switch is created. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Fix arc kernel buildHauke Mehrtens2019-05-171-10/+10
| | | | | | | | | This fixes a patch for the ARC architecture. This was found by the build bot. Fixes: 5183df0dbf5f ("kernel: bump 4.9 to 4.9.161") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: rt305x: Reduce size of a5-v11 imageHauke Mehrtens2019-05-171-1/+0
| | | | | | | | | | The root file system of the a5-v11 image was too big and broke the build, remove the USB modules from the default image to make it smaller. This should fix the build again. This was found by the build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.118Koen Vandeputte2019-05-156-9/+9
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.175Koen Vandeputte2019-05-157-13/+13
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.172Koen Vandeputte2019-05-065-7/+7
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.114Koen Vandeputte2019-05-0234-215/+146
| | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 150-bridge_allow_receiption_on_disabled_port.patch - 201-extra_optimization.patch Remove upstreamed: - 022-0006-crypto-crypto4xx-properly-set-IV-after-de-and-encryp.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.171Koen Vandeputte2019-05-027-175/+177
| | | | | | | | | | | | | Refreshed all patches. Altered patches: - 150-bridge_allow_receiption_on_disabled_port.patch - 201-extra_optimization.patch Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.113Koen Vandeputte2019-04-231-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.170Koen Vandeputte2019-04-232-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.112Koen Vandeputte2019-04-222-2/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.169Koen Vandeputte2019-04-224-3/+5
| | | | | | | | | | | | | Refreshed all patches. New symbols: - CONFIG_PPC_BARRIER_NOSPEC - CONFIG_LDISC_AUTOLOAD Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: GL.iNet AR300M family: correct LED definitionsAndreas Ziegler2019-04-222-8/+2
| | | | | | | | | remove USB as this is no LED but power control rename WiFi LED with correct color red (like in stock firmware) set middle LED to be used for LAN link/activity Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de> (cherry picked from commit 53c46b504c630e4c9c5a00bf644a69919bfc0c03)
* lantiq: tdw89x0: Fix WLAN LED on TP-Link W8970 v1.2 (FS#2232)Petr Štetiar2019-04-171-0/+1
| | | | | | | | | | This patch fixes disfunctional WLAN LED on TP-Link W8970. The LED was reported working in the CC release[1], but doesn't work anymore in 18.06.2. 1. https://github.com/openwrt/chaos_calmer/commit/420cb24d41fcd650795f09d2b26e0e1d2cf21165 Tested-by: Damian Janarek <dzanar18@o2.pl> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: Fix IMAGE_SIZE for TP-Link Archer C7 v5Adrian Schmutzler2019-04-111-1/+1
| | | | | | | | | | | | | | IMAGE_SIZE for C7v5 is wrong in openwrt-18.06, looks like it was just copied from C7v4. In master, this got fixed with the introduction of dynamic partitioning in https://github.com/openwrt/openwrt/commit/7c78be1b747eb0c8d64da67deb3a8aec75bd7b9c However, this is not connected to the changes introduced there, but also applies to the static partitioning in openwrt-18.06. It appears to be simply wrong at the moment ... Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: Correct MAC address for WAN interface of Archer C7 v5Adrian Schmutzler2019-04-111-0/+4
| | | | | | | | | | | This device shares the network config with v4, thus the WAN MAC also needs to be fixed the same way. However, the partition where the MAC address resides has been changed. Backport of commit 93d23aced24c2e620461e1b0448d35be21f7e501 Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 09:43:05 +0000