aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: copy 5.4 patches/kconfigs to 5.10Rui Salvaterra2021-02-2353-0/+5216
| | | | | | | | | | Just a simple copy, no refresh yet. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [do not duplicate files] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: refresh the 5.4 kernel configsRui Salvaterra2021-02-233-283/+24
| | | | | | | | | Remove the implicit/inherited symbols. While not strictly necessary, this will make reviewing the diff between 5.4 and 5.10 easier. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: add further generic kconfig symbolsRui Salvaterra2021-02-231-0/+7
| | | | | | | | | | This will make the specific kconfig smaller. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [improved commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: fix SMP CPU mappingÁlvaro Fernández Rojas2021-02-232-11/+58
| | | | | | | | SMP isn't supported on BCM6358 since it has a shared TLB. Some boards boot with CPU #1 instead of CPU #0, and this is currently not supported do to a smp-bmips bug. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to accepted upstream patchÁlvaro Fernández Rojas2021-02-232-8/+25
| | | | | | This patch has been accepted and is going to be in linux v5.12. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: rename upstream patchesÁlvaro Fernández Rojas2021-02-239-0/+0
| | | | | | These patches were applied in linux v5.11, not v5.12. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6358: add watchdogÁlvaro Fernández Rojas2021-02-231-0/+9
| | | | | | | Watchdog node was missing in commit 029093a302. Fixes: 029093a302c9 ("bmips: add new target") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove unneeded downstream serial patchÁlvaro Fernández Rojas2021-02-232-12/+1
| | | | | | Disabling CONFIG_SERIAL_8250 makes the upstream serial driver work OOB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: pinctrl: fix BCM6348 groupsDaniel González Cabanelas2021-02-235-58/+21
| | | | | | | | | | | | | | | | | | | | The current driver has some troubles: - Some groupings are wrong. - The pinctrl group0 owns pins never used (at least in Openwrt) for any pinmux. The driver hijacks all the pins on the group avoiding any other use, spite they're free. I.e. for buttons, causing this kernel error: [ 4.735928] gpio-keys-polled keys: unable to claim gpio 479, err=-22 [ 4.742642] gpio-keys-polled: probe of keys failed with error -22 - Minor errors about groupings on the documentation - Missing "diag" grouping in dtsi - Wrong groupings in dtsi Fix it by setting the correct groups. And relax the pin capturing, letting the gpios belonging to any group to be used for other purposes like buttons. This was the behavior with stock firmwares and old OpenWrt versions which never caused any trouble. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: bcm6358: fix EHCI/OHCI kernel panicsÁlvaro Fernández Rojas2021-02-232-0/+70
| | | | | | | ARCH_HAS_SYNC_DMA_FOR_CPU_ALL is causing kernel panics when EHCI or OHCI are enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* imx6: remove redundant IMAGE_NAMEAdrian Schmutzler2021-02-231-2/+0
| | | | | | | | | | IMAGE_NAME is set twice for ventana, and the second value actually matches the default in image.mk. Remove both. Fixes: ded905ce431b ("imx6: extend cubox support to hummingboard, add support for building full images") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove redundant KERNEL_PREFIX definitionsPaul Spooren2021-02-234-7/+0
| | | | | | | | | | The variables KERNEL_INITRAMFS_PREFIX and KERNEL_PREFIX are already defined in include/image.mk and don't have to be redefined in the target Makefiles. Signed-off-by: Paul Spooren <mail@aparcar.org> [also cover imx6] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: split base-files into subtargetsAdrian Schmutzler2021-02-235-6/+36
| | | | | | | | | Like done for several targets already, splitting base-files into subtarget will provide smaller images due to more specific distribution of files per subtarget and allow to use default cases more effectively. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: add JFFS2 unaligned access patchÁlvaro Fernández Rojas2021-02-221-0/+26
| | | | | | This patch is also needed on bmips if SMP is enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6368: fix bcm2835-rngÁlvaro Fernández Rojas2021-02-222-0/+76
| | | | | | | IPSEC needs a reset before using its HW RNG. Otherwise, the numbers generated won't be random at all. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix Phicomm PSG1218A switch port labelsShiji Yang2021-02-221-1/+1
| | | | | | | | The lan port sequence was reversed compared to the labels. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: move aliases to the top in SoC DTSI filesAdrian Schmutzler2021-02-229-47/+47
| | | | | | | The aliases node is expected as one of the first entries, and having it there matches alphabetic sorting as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: drop redundant definitions of serial0 in aliasesAdrian Schmutzler2021-02-224-4/+0
| | | | | | | | These were redefines of the same value already set in the SoC dtsi files. Reported-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: add new targetÁlvaro Fernández Rojas2021-02-2280-0/+12048
| | | | | | | | | | | | | | | | | This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: limit name metadata to model nameÁlvaro Fernández Rojas2021-02-221-5/+1
| | | | | | | Since there are only 16 characters available, on most cases the vendor name will fit in the metadata, but the model name won't fit. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: mtdsplit: add support for BCM63XX CFE firmwareÁlvaro Fernández Rojas2021-02-225-0/+194
| | | | | | | | Broadcom CFE bootloader relies on a tag for identifying the current firmware, such as version, image start address, kernel address and size, rootfs size, board id, signatures, etc. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: correct/add Phicomm K2x WAN/label MAC addressShiji Yang2021-02-221-4/+4
| | | | | | | | | | | | | | Phicomm K2G: add missing label_mac Phicomm PSG1218A & PSG1218B: The previous wan mac was set as factory@0x28 +1 (originally based on the default case for the ramips target), but the correct wan mac is factory@0x28 -1, being equal to factory@0x2e. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: bcm63268: fix GPIO interruptsÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | | | pinctrl should rely on external interrupt controller for GPIO interrupts. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: add missing symbolDavid Bauer2021-02-221-0/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: enable Regulator support for targetDavid Bauer2021-02-225-3/+2
| | | | | | | | | | | | Regulator support was enabled on all subtargets except for ath79-nand. With Kernel 5.10, AT803x requires Regulator support, thus enabling on the complete target, as ath79-nand requires AT803x. While this is only required on Kernel 5.10, enable it also on 5.4. We have no major size-constraint, so enabling it on 5.4 allows us to clean up the occurences in the subtarget configuration. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add testing kernel for p1020David Bauer2021-02-222-0/+4
| | | | | | | CONFIG_REGULATOR is required for the p1020 subtarget, as the AT803X driver depends on it. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: use ioremap kernel version independentDavid Bauer2021-02-221-14/+0
| | | | | | | | | | As mangix pointed out on IRC, ioremap and ioremap_nocache are functionally equivalent on kenrel 5.4 and 5.10. Therefore we can use ioremap regardless of the kernel the driver gets compiled for. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: sort configAleksander Jan Bajkowski2021-02-212-6/+6
| | | | | | | | | | | | | This was done by executing this script: find . -name "config-*" > ../configs.txt for config in $(cat ../configs.txt); do ./scripts/kconfig.pl '+' $config /dev/null > $config-new mv $config-new $config done rm ../configs.txt Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* bcm27xx: remove urngd packageÁlvaro Fernández Rojas2021-02-201-0/+2
| | | | | | Now that khwrngd is working on all subtargets we can remove urgnd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: enable bcm2711 HW RNGÁlvaro Fernández Rojas2021-02-203-0/+27
| | | | | | Also add a patch setting its quality, which should make it usable by khwrngd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: add bcm2835-rng quality patchÁlvaro Fernández Rojas2021-02-202-0/+52
| | | | | | | This patch allows devices without a high resolution timer to boot up faster. It should speed up boots for bcm2708 and bcm63xx. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* x86: add led driver for PC Engines APU1Andreas Eberlein2021-02-204-5/+50
| | | | | | | | | This driver adds the LED support for the PC Engines APU1. This integrates the Linux kernel driver and includes a patch to support newer firmware versions. Also the default LED configuration is updated to use the correct devices. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
* sdk: expose binary strip settingsDavid Bauer2021-02-201-0/+46
| | | | | | | Expose the SDK options for binary stripping to the menuconfig. This way, packages can easily be built with debug symbols using the SDK. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: overwrite reset gpio properties in EX6150 DTSStijn Segers2021-02-201-0/+3
| | | | | | | | | | | | | | | The Netgear EX6150 can, just like the D-Link DIR-860L rev B1, fail to initialise both radios in some cases. Add the reset GPIOs explicitly so the PCI-E devices get re-initialised properly. See also FS #3632. Error shows up in dmesg as follows: [ 1.560764] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) Tested-by: Kurt Roeckx <kurt@roeckx.be> Signed-off-by: Stijn Segers <foss@volatilesystems.org> [removed period from commit title] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add kernel 5.10 supportDavid Bauer2021-02-2042-1/+3854
| | | | | | | | | | | | | | | | This adds Kernel 5.10 support for the generic, nand and tiny subtargets. The following patch is not contained, as it needs to be reworked: platform/920-mikrotik-rb4xx.patch Tested-on: - Siemens WS-AP3610 - Enterasys WS-AP3710 - Aerohive HiveAP 121 - TP-Link TL-WA901 v2 - TP-Link TL-WR741 v1 Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: ar934x-nand: add kernel 5.10 compatibilityDavid Bauer2021-02-201-0/+30
| | | | | | | | | Adapt the driver to make it work with the NAND subsystem changes between kernel 5.4 and 5.10. Tested-on: Aerohive HiveAP121 Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: specify device-type for PCI controllersDavid Bauer2021-02-206-0/+14
| | | | | | | | Specify the device_type property for PCI as well as PCIe controllers. Otherwise, the PCI range parser will not be selected when using kernel 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: ag71xx: make kernel 5.10 compatibleDavid Bauer2021-02-202-1/+28
| | | | | | | Add the necessary kernel version ifdef switches in order to support the kernel version 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx-p1010: add Kernel 5.10 supportDavid Bauer2021-02-2011-0/+735
| | | | | | | | | | | | | | Tested on: Sophos RED 15W The TP-Link WL-WDR4900 needs to be disabled when 5.10 becomes the default kernel. When building with all kmods enabled, the resulting kernel image exceeds the maximum size the bootloader reads from the flash. For more information, see GitHub issue #1773 Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: add Kernel 5.10 supportDavid Bauer2021-02-2012-318/+1178
| | | | | | | | | | | | | | Remove all upstreamed patches and add the kernel configuration for version 5.10. The Rock Pi 4 was split in multiple versions. Add a DTS with the old name in order to keep compatibility while having kernel 5.4 and 5.10 in parallel. Switch to the Rock Pi 4A DTS once Kernel 5.4 support is removed. Tested-on: Nanoi R2S Signed-off-by: David Bauer <mail@david-bauer.net>
* kirkwood: rename files-5.4 to filesSungbo Eo2021-02-197-0/+0
| | | | | | | Move local DTS files from "files-5.4" to "files" directory so kernel 5.10 can use it. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* layerscape: add new devices in README and clean upYangbo Lu2021-02-191-33/+70
| | | | | | | | | Support new devices LS1046AFRWY and LX2160ARDB in README. Clean up README, and add missing LS1021ATWR deploy guide. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [adjust set of devices added, update commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add LX2160ARDB (Rev2.0 silicon) board supportYangbo Lu2021-02-192-4/+61
| | | | | | | | | | | | | | | | | | | | | | The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add FRWY-LS1046A board supportYangbo Lu2021-02-192-0/+46
| | | | | | | | | | | | | | | | | | | The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: move rework-sdcard-images out of fsl-sdbootAdrian Schmutzler2021-02-192-2/+6
| | | | | | | Upcoming devices will not need the migration setup, so let's move it out of the common definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use lzma-loader for Wevo devicesSeo Suchan2021-02-191-0/+2
| | | | | | | | | | As kernel size increased it start to fail to load squishfs image, using lzma-loader fixed it. wevo_11acnas is almost same device as w2914ns-v2 except ram size, so I expect same thing would've happen in that device too. Signed-off-by: Seo Suchan <abnoeh@mail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7621: add TP-Link EAP235-Wall supportSander Vanheule2021-02-193-0/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP235-Wall is a wall-mounted, PoE-powered AC1200 access point with four gigabit ethernet ports. When connecting to the device's serial port, it is strongly advised to use an isolated UART adapter. This prevents linking different power domains created by the PoE power supply, which may damage your devices. The device's U-Boot supports saving modified environments with `saveenv`. However, there is no u-boot-env partition, and saving modifications will cause the partition table to be overwritten. This is not an issue for running OpenWrt, but will prevent the vendor FW from functioning properly. Device specifications: * SoC: MT7621DAT * RAM: 128MiB * Flash: 16MiB SPI-NOR * Wireless 2.4GHz (MT7603EN): b/g/n, 2x2 * Wireless 5GHz (MT7613BEN): a/n/ac, 2x2 * Ethernet: 4× GbE * Back side: ETH0, PoE PD port * Bottom side: ETH1, ETH2, ETH3 * Single white device LED * LED button, reset button (available for failsafe) * PoE pass-through on port ETH3 (enabled with GPIO) Datasheet of the flash chip specifies a maximum frequency of 33MHz, but that didn't work. 20MHz gives no errors with reading (flash dump) or writing (sysupgrade). Device mac addresses: Stock firmware uses the same MAC address for ethernet (on device label) and 2.4GHz wireless. The 5GHz wireless address is incremented by one. This address is stored in the 'info' ('default-mac') partition at an offset of 8 bytes. From OEM ifconfig: eth a4:2b:b0:...:88 ra0 a4:2b:b0:...:88 rai0 a4:2b:b0:...:89 Flashing instructions: * Enable SSH in the web interface, and SSH into the target device * run `cliclientd stopcs`, this should return "success" * upload the factory image via the web interface Debricking: U-boot can be interrupted during boot, serial console is 57600 baud, 8n1 This allows installing a sysupgrade image, or fixing the device in another way. * Access serial header from the side of the board, close to ETH3, pin-out is (1:TX, 2:RX, 3:GND, 4:3.3V), with pin 1 closest to ETH3. * Interrupt bootloader by holding '4' during boot, which drops the bootloader into its shell * Change default 'serverip' and 'ipaddr' variables (optional) * Download initramfs with `tftpboot`, and boot image with `bootm` # tftpboot 84000000 openwrt-initramfs.bin # bootm Revert to stock: Using the tplink-safeloader utility from the firmware-utils package, TP-Link's firmware image can be converted to an OpenWrt-compatible sysupgrade image: $ ./staging_dir/host/bin/tplink-safeloader -B EAP235-WALL-V1 \ -z EAP235-WALLv1_XXX_up_signed.bin -o eap235-sysupgrade.bin This can then be flashed using the OpenWrt sysupgrade interface. The image will appear to be incompatible and must be force flashed, without keeping the current configuration. Known issues: - DFS support is incomplete (known issue with MT7613) - MT7613 radio may stop responding when idling, reboot required. This was an issue with the ddc75ff704 version of mt76, but appears to have improved/disappeared with bc3963764d. Error notice example: [ 7099.554067] mt7615e 0000:02:00.0: Message 73 (seq 1) timeout Hardware was kindly provided for porting by Stijn Segers. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ramips: remove factory image for TP-Link Archer C20 v1Stijn Segers2021-02-191-0/+1
| | | | | | | | | | | | Similarly to the Archer C2 v1, the Archer C20 v1 will brick when one tries to flash an OpenWrt factory image through the TP-Link web UI. The wiki page contains an explicit warning about this [1]. Disable the factory image altogether since it serves no purpose. [1] https://openwrt.org/toh/tp-link/tp-link_archer_c20_v1#installation Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ath79: fix position of SPDX license identifierAdrian Schmutzler2021-02-191-1/+0
| | | | | | | Strictly, the identifier needs to be in the line directly after the shebang. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix SPDX license identifier on local DTS filesAdrian Schmutzler2021-02-194-8/+4
| | | | | | | | | | | The SPDX license identifier must be in the first line of a file, unless there is a shebang (then it's the second line). Fix this for the local files, do not care about the upstream patches. While at it, update the identifiers where necessary. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 00:01:00 +0000