aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: ZyXEL Keenetic Omni align factory imagesVitaly Chekryzhev2017-04-281-2/+2
| | | | | | ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: correct keenetic-series switch indexVitaly Chekryzhev2017-04-281-1/+1
| | | | | | Fix switch name typo Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: add support for Netgear WN3000RPv3Thibaut VARENE2017-04-287-2/+163
| | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix mac address of miwifi-miniBangLang Huang2017-04-282-1/+5
| | | | | | | For the miwifi-mini, the offset of ethernet mac should be 0x28 which you can easyily dump from 'Factory' partition. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips: Clean duplicated status property for Omega2 WMAC in dtsiFurong Xu2017-04-281-4/+0
| | | | | | At the tail of dtsi, wmac is enabled twice, clean the first one Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: fixed sms led polarity into dwr-512 DTGiuseppe Lippolis2017-04-281-1/+1
| | | | Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: WN3000RPv3: do not setup switchThibaut VARENE2017-04-281-0/+1
| | | | | | | | | The WN3000RPv3 is a repeater with a single ethernet port. Setting up the switch, even to disable it, is unnecessary and possibly confusing. Configure LAN as eth0 instead. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* x86: enable 4G high memory support for generic (32bit) subtargetJo-Philipp Wich2017-04-272-3/+8
| | | | | | | | | This is required to fully support a number of 32bit x86 systems equipped with more than one GB ram, e.g. certain Atom CPU machines. Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* generic: keep module aliases inside .modinfoYousong Zhou2017-04-272-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems module aliases are actually essential info. E.g. other modules may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the kernel will request user mode modprobe helper for ipt_hashlimit and ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko Compile-tested for armvirt, there is nearly no size impact. Before -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:07 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums After -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:10 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: use skb_cow_head() to deal with cloned skbsÁlvaro Fernández Rojas2017-04-237-0/+267
| | | | | | | | | | | We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes Ethernet<->WiFi bridge for Raspberry Pi and probably other devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: fix minor syntax error in /lib/upgrade/platform.shMatthias Schiffer2017-04-221-1/+1
| | | | | | | Fix a '==' that should be a '=' in a test condition. Busybox fortunately doesn't care. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter XMatthias Schiffer2017-04-221-1/+1
| | | | | | Fixes removal of unneeded kernel modules with per-device rootfs. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* bcm53xx: backport BCM5301X patchesRafał Miłecki2017-04-209-2/+975
| | | | | | | This fixes GIC interrupts (required before switching to 4.9), adds few new entires & introduces DTS for Archer C5. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: parepare for building more Linksys imagesRafał Miłecki2017-04-201-1/+16
| | | | | | We still can't enable them by default without proper TRX support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: prepare for building Archer C5 V2 imageRafał Miłecki2017-04-201-0/+9
| | | | | | Don't enable it yet as kernel needs to be updated first. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: add TP-LINK TL-WR841N/ND v12 imageVittorio Gambaletta2017-04-201-1/+7
| | | | | | | | | | | | | This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). If the stock firmware web interface doesn't accept LEDE factory image, it can be flashed via the U-Boot TFTP recovery mode, by long-pressing the reset button after power on. The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12). Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* kernel: update kernel 4.4 to 4.4.61Jo-Philipp Wich2017-04-154-115/+7
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add RP-N53 pcie wireless eepromMathias Kresin2017-04-121-0/+9
| | | | | | | | | | Fix the PCIe 5GHz wireless by using the on flash eeprom/caldata. Disable the 2.4GHz band as this band has no antennas attached but is enabled in the eeprom/caldata. Fixes: FS#691 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix WHR-600D eeprom dt propertyMathias Kresin2017-04-121-3/+3
| | | | | | | | | | | Fix the PCIe 5GHz wireless by using the ralink mtd-eeprom property as this board have a RT5592 and uses the rt2x00 driver. The mediathek device tree bindings do not work here. Fixes: FS#691 Fixes: d8dd207ea6f2 ("ramips: use the ralink,mtd-eeprom device tree property") Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: Fix the incorrect i_nlink count after jffs2's RENAME_EXCHANGE ↵Jing Qiu2017-04-051-5/+28
| | | | | | | | | | | | | | | | | | | | | operations. The problem is caused by the incorrect handling of the parent inode's i_nlink count for the dentry to be RENAME_EXCHANGED. There are 3 cases to consider. Assume we want to RENAME_EXCHANGE struct dentry *a and struct dentry *b, and inode_a is pointed to by dentry_a, inode_b is pointed to by dentry_b: 1. If inode_a is a directory, but inode_b isn't, then we must decrease the i_nlink count of old_dir_i, and increase the i_nlink of new_dir_i. 2. If inode_a isn't a directory, but inode_b is a directory, then we must increase the i_nlink of old_dir_i, and decrease the i_nlink count of new_dir_i. 3. If the types of inode_a and inode_b are the same, we don't change the i_nlink for either old_dir_i or new_dir_i. Signed-off-by: Jing Qiu <aqiu0720@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix Wallys DR344 ethernet MAC addresses offsetsPiotr Dymacz2017-04-021-2/+3
| | | | | | | Without this fix, ethernet interfaces on Wallys DR344 use random MAC addresses. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: update kernel 4.4 to 4.4.59Hauke Mehrtens2017-04-0267-525/+133
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: wrt3200acm enable SDIO interfaceHenryk Heisig2017-03-112-0/+11
| | | | | | add mwifiex-sdio package to wrt3200acm Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* brcm2708: remove duplicated gzip from image generationÁlvaro Fernández Rojas2017-03-111-1/+0
| | | | | | Images are now automatically gziped so remove custom image command Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: add ath10k driver and firmware for Netgear R6100 to firmware imageStijn Segers2017-03-111-1/+1
| | | | | | | | A Netgear R6100 owner reported the LEDE images lack the ath10k driver and firmware [1]. This patch adds both to the R6100 image. [1] https://forum.lede-project.org/t/netgear-r6100-5ghz-wifi-not-working-after-initial-install/2222 Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* brcm2708: add support for the new Raspberry Pi Zero WStijn Tintel2017-03-094-4/+12
| | | | | | Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: order boards and models alphabeticallyStijn Tintel2017-03-084-20/+24
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2017-03-0843-9/+3194
| | | | | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y - led1 can't be controlled on rpi-3 for linux 4.4, remove it. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix Linksys RE6500 switch port mappingJo-Philipp Wich2017-03-071-1/+4
| | | | | | | | Properly map the internal switch ports to the proper LAN1..LAN4 labels. Fixes #530. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to 4.4.52Kevin Darbyshire-Bryant2017-03-032-9/+9
| | | | | | | | Bump kernel from 4.4.50 to 4.4.52 Refresh patches Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* bcm53xx: backport accepted BCM5301X and BCM53573 patchesRafał Miłecki2017-03-039-0/+689
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: include Broadcom PHY driver in the kernelRafał Miłecki2017-03-031-0/+2
| | | | | | | | | | | | | | | | | Initial idea was to use package with this PHY driver for devices that need it. Unfortunately this can't work as bgmac is built-in and PHY probing happens before loading modules - it results in PHY subsystem picking default (generic) PHY driver. There were two ways of solving this: 1) Making bcm53xx use bgmac as module xor 2) Built-in Broadcom PHY driver After some quick discussion it seems we can simply built-in the driver as increased kenel size is relatively small (1805 B). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kirkwood: fix include in etc/board.d/02_networkAlberto Bursi2017-03-011-0/+1
| | | | | | the mtd_get_mac_ascii function called within this script requires the inclusion of /lib/functions/system.sh Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* archs38: only calculate entry point address when necessaryFelix Fietkau2017-03-011-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: only calculate entry point address when necessaryFelix Fietkau2017-03-011-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix platform_find_rootfspart()Thibaut VARENE2017-03-011-1/+1
| | | | | | | | platform_find_rootfspart() fails if the kernel partition comes before the rootfs partition. The proposed patch fixes this while preserving what I understand was the original idea: stop at first match. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Airlink AR725W device titleMathias Kresin2017-03-011-1/+1
| | | | | | Gemtek is the ODM but the board was sold by Airlink101. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86/64: Enable GPIO sysfs & GPIO LED supportChris Blake2017-03-011-0/+9
| | | | | | | | The following changes enables GPIO sysfs as well as the LEDS_GPIO option within the kernel. This is required to enable LEDs over a GPIO interface. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* lantiq: fix broadcast packets leaking on the wrong vlan on xrx200Felix Fietkau2017-02-231-5/+6
| | | | | | | | | | | | | | | The ethernet driver uses a port map override via special tag to control the ports on which multicast packets are sent. This was added to work around an issue in the switch that was occasionally leaking packets onto the wrong vlan. Unfortunately the change had some leftover lines that were overwrting the port map with a list of all ports, thus always leaking packets onto the wront vlan. Fix this by only enabling the override with the VLAN port map and only if a matching VLAN port map was actually found Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move upstream accepted bcm47xxpart TRX cleanupsRafał Miłecki2017-02-222-3/+10
| | | | | | Use 0xx prefix for accepted patches. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport bcm47xxsflash support for reading 32 MiB flashesRafał Miłecki2017-02-222-0/+144
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 5c49fecf72c9c10b1d302b0a9d4db3b4ce3c782c)
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-221-0/+1
| | | | | | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Fixes FS#384. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> (cherry picked from commit 237454991618e0e8b7ceb8a8a2a43fca12c1a454) Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.4 to version 4.4.50Jo-Philipp Wich2017-02-2013-88/+45
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Remove images for rb-941-2ndThibaut VARENE2017-02-191-2/+0
| | | | | | | | | | The code that generates this image is broken in many ways. The new code currently in master generates images that will not be compatible with the ones in 17.01. To avoid a migration nightmare, this patch removes image generation for this device in 17.01 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* sdk: emit proper tag references for base URLsJo-Philipp Wich2017-02-191-3/+5
| | | | | | | | | Properly resolve symbolic tag names when constructing the base feed Git url and avoid emitting "HEAD" references when building from detached commits. Fixes #495, #501. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: set the internet led interface according to wan interfaceMathias Kresin2017-02-181-0/+1
| | | | | | | | Use the nas0 interface for the netdev trigger as default. Use the ptm0 interface for xRX200 boards to match the default wan interface set in 02_network. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: introduce lantiq_is_vdsl_systemMathias Kresin2017-02-182-1/+5
| | | | | | | Move the code to check if the current system is a system with vdsl support to a dedicate function to make it reusable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV7519RW22 switch port indexingMathias Kresin2017-02-181-1/+1
| | | | | | Fixes FS#454. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: fix ethernet PLL configuration for QCA956xFelix Fietkau2017-02-171-1/+1
| | | | | | | QCA956x is configured like AR934x, not like the older chips. Should fix ethernet hangs when using the WAN port without SGMII Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 14:59:30 +0000