aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: add support for Acer Predator W6David Bauer2023-08-058-0/+579
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986A RAM: 1GB DDR4 FLASH: 4GB eMMC WiFi: 2x2 2.4 GHz 802.11 b/g/n/ax MT7916 DBDC 4x4 5 GHz 802.11 a/n/ac/ax MT7986 2x2 6 GHz 802.11ax MT7916 DBDC ETH: 4x LAN 1Gbit/s (MT7531) 1x WAN 2.5Gbit/s (GPY211) BTN: RESET, WPS LED: Antenna LEDs (GPIO) Mood-LED (Kinetic KTD2601) - unsupported UART: Header nest to USB port - 3V3 115200 8N1 [BUTTON] GND - RX - TX [USB] Installation ------------ 1. Connect to the device using serial console. 2. Interrupt the Autoboot process when promted by sending '0' twice. 3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name the image "predator.bin" and conenct the TFTP server to the routers LAN port. 4. Configure U-Boot to allow loading unsigned images from MMC $ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000'; saveenv 5. Transfer the image from U-Boot $ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 6. Wait for OpenWrt to boot 7. Transfer the OpenWrt sysupgrade image to the router using scp. 8. Install OpenWrt using sysupgrade. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7e7eb5312d7810084547bb54a4b6867c2da08182)
* kernel: bump 5.15 to 5.15.123John Audia2023-07-3194-569/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch[7] ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[8] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=40844343a8853a08b049d50c967e2a1e28f0ece6 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=6ad5ded420f5d96f7c65b68135f5787a1c7e58d7 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8590531048f138ff719c8b317c443a6a7538a762) [Refreshed on top of openwrt-23.05] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: backport more DT changes queued for v6.6Rafał Miłecki2023-07-298-28/+290
| | | | | | | Those sort out BCM53573 Ethernet info finally. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ca8868a51127f6081a524d47eab937b90af0bf05)
* bcm53xx: add BCM53573 Ethernet fix sent upstream for v6.6Rafał Miłecki2023-07-291-0/+28
| | | | | | | | | | | | | | It seems that DSA-based b53 driver never worked with BCM53573 SoCs and BCM53125. In case of swconfig-based b53 this fixes a regression. Switching bgmac from using mdiobus_register() to of_mdiobus_register() resulted in MDIO device (BCM53125) having of_node set (see of_mdiobus_register_phy()). That made downstream b53 driver read invalid data from DT and broke Ethernet support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 79fd3e62b4910731c13692b2daa2083e0f95c023)
* ipq4019: fix support for AVM FRITZ!Repeater 3000Alexander Friese2023-07-271-0/+3
| | | | | | | | | new versions of the device have NAND with 8bit ECC which was not yet supported before. This change removes ECC restrictions. Signed-off-by: Alexander Friese <af944580@googlemail.com> (cherry picked from commit 6b11f0ec83ceb9747dcbb0ffca0882b90da46b59)
* ipq40xx: add support for Teltonika RUTX50David Bauer2023-07-265-2/+203
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M Flash: 16MB SPI-NOR (W25Q128) 128MB SPI-NAND (XTX) WiFi: 2T2R (2GHz 802.11n ; 5 GHz 802.11ac) ETH: 4x LAN ; 1x WAN (Gigabit) CELL: Quectel RG501Q 3G/4G/5G UART: Available on the goldfinger connector (Pinout silkscreened) 115200 8N1 3V3 - Only connect RX / TX / GND Installation ------------ 1. Enable SSH in the Teltonika UI (System --> Administration --> Access Control) 2. Check from which partition set the device is currently running from. $ cat /proc/boot_info/rootfs/primaryboot In case this output reads 0, install a Software update from Teltonika first. After upgrade completion, check this file now reads 1 before continuing. 2. Transfer the OpenWrt factory image to the device using scp. Use the same password (user root!) as used for the Web-UI. $ scp -O openwrt-factory.bin root@192.168.1.1:/tmp 3. Connect to the device using ssh as the root user. 4. Install OpenWrt by writing the factory image to flash. $ ubiformat /dev/mtd16 -y -f /tmp/openwrt-factory.bin 5. Instruct the bootloaer to boot from the first partition set. $ echo 0 > /proc/boot_info/rootfs/primaryboot $ cat /proc/boot_info/getbinary_bootconfig > /tmp/bootconfig.bin $ cat /proc/boot_info/getbinary_bootconfig1 > /tmp/bootconfig1.bin $ mtd write /tmp/bootconfig.bin /dev/mtd2 $ mtd write /tmp/bootconfig1.bin /dev/mtd3 6. Reboot the device. $ reboot Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 844bb4bfad84cc6267f9b138d1f63b07ed3b77d0)
* ipq40xx: move Teltonika RUT STM32 IO to specific DTSDavid Bauer2023-07-262-37/+37
| | | | | | | Prepare to re-use the DTS for the RUTX50. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit dbc4be142e206e681ac53afa3fd1e4018e7843b7)
* kernel: move NXP DPAA2 SFP patches to generic patchesMathew McBride2023-07-262-2/+2
| | | | | | | | | | | | | These are used by both the armsr (EFI boot) and layerscape targets for phylink-controlled SFP support on NXP DPAA2 platforms (LS1088,LS2088,LX2160). This is in place of commit a7bd96c98f8f ("layerscape: add patches for SFP support on DPAA2 platforms") in the main branch. armsr in main started at kernel 6.1 so there is not an equivalent 5.15 commit to cherry pick. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* layerscape: base-files: remove redundant RAMFS_COPY_* additionsMathew McBride2023-07-261-2/+2
| | | | | | | | All the tools (e.g fw_setenv, ubiupdatevol) and config (fw_env.config) needed for sysupgrade are already included in /lib/upgrade/stage2 Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 094c37708ace9040e294c5aa7be34bc9e7a8dcc1)
* layerscape: remove Traverse LS1043 boardsMathew McBride2023-07-2610-735/+0
| | | | | | | | | | | | | | | | | The Traverse LS1043 boards were not publicly released, all the production has been going to OEM customers who do not use the image format defined in the OpenWrt tree. Only a few samples were circulated outside Traverse and our OEM customers. The public release (then called Five64) of this series was cancelled in favour of our LS1088A based design (Ten64). It is best to remove these boards to avoid wasting OpenWrt project and contributor resources. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 8e7ba6fbae80838c2219ee38307af9c883606c2c)
* layerscape: armv8_64b: add Traverse Ten64 NAND variantMathew McBride2023-07-267-1/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ten64 board[1] is based around NXP's Layerscape LS1088A SoC. It is capable of booting both standard Linux distributions from disk devices, using EFI, and booting OpenWrt from NAND. See the online manual for more information, including the flash layout[2]. This patchset adds support for generating Ten64 images for NAND boot. For disk boot, one can use the EFI support that was recently added to the armvirt target. We previously supported NAND users by building inside our armvirt/EFI target[3], but this approach is not suitable for OpenWrt upstream. Users who used our supplied NAND images will be able to upgrade to this via sysupgrade. Signed-off-by: Mathew McBride <matt@traverse.com.au> [1] - https://www.traverse.com.au/hardware/ten64 [2] - https://ten64doc.traverse.com.au/hardware/flash/ [3] - Example: https://gitlab.com/traversetech/ls1088firmware/openwrt/-/commit/285e4360e1604eb466880d245d48efd9962143a5 (cherry picked from commit af0546da3440dba24217949527e503820350ff05)
* ramips: do not print error log when mdio bus is disabledShiji Yang2023-07-261-1/+1
| | | | | | | | | | The mdio bus is used to control externel switch. In most cases, they are disabled, which is the normal behavior. Treating this as an error makes no sense, so we need to change the notification level from error to info. Fixes: a2acdf960704 ("ramips: mt7620: remove useless GMAC nodes") Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit 285f0668f4058a935389985eb80353c8a5adbc7d)
* ramips: backport upstream mt762x PCIe driver error log fixesShiji Yang2023-07-263-0/+102
| | | | | | | | | | | | | | | | | | | | | These patches silence some mt762x PCIe driver error messeges by removing the useless debugging codes and replacing incorrectly used 'dev_err()' with 'dev_info()': PCI: mt7621: Use dev_info() to log PCIe card detection [1] mips: pci-mt7620: do not print NFTS register value as error log [2] mips: pci-mt7620: use dev_info() to log PCIe device detection result [3] Patch [1] has already been merged into the Linux 6.3 branch. Patches [2] and [3] have been merged into the "mips-next" tree, and they will be part of the upcoming Linux 6.5. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v6.4-rc7&id=50233e105a0332ec0f3bc83180c416e6b200471e [2] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=9f9a035e6156a57d9da062b26d2a48d031744a1e [3] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit 4e74777fa8111a2bdf63164a4920a42917faec28)
* lantiq: add patches headersAleksander Jan Bajkowski2023-07-269-32/+129
| | | | | | | | This commit adds headers to the patches, so they can be applied with the git am command. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 5d51079fd064a86119c6f44920e737cf5e25d3a0)
* kernel: update patches for mediatek filogicFelix Baumann2023-07-261-1/+1
| | | | | | | | Fix complaint from actions Check Kernel patches (mediatek, filogic) https://github.com/openwrt/openwrt/actions/runs/5569719763/job/15081672586?pr=13072 Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* kernel: drop mips highmem offset start overridesFelix Fietkau2023-07-242-38/+0
| | | | | | | | | | | | The maximum offset that can be supported is 0x20000000 Do not override it to to something bigger than that on MT7621, as that could cause issues based on the fixed memory mappings. This makes the last 64 MB RAM unusable on MT7621 devices with 512 MB but avoids incurring a heavy performance hit Fixes: cd2b74e01e8d ("ramips: mt7621: disable highmem support and remove highmem offset patch") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a110de8152df46a1e2adf7010ba75fb3b1236cd8)
* ramips: mt7621: disable highmem support and remove highmem offset patchFelix Fietkau2023-07-242-3/+19
| | | | | | | | | | | On MT7621 it was observed, that enabling highmem support causes a significant performance drop, as documented in: https://github.com/openwrt/openwrt/issues/13151 By adjusting the highmem start offset, we avoid leaving any RAM unaddressable, even on devices with 512 MB Fixes: https://github.com/openwrt/openwrt/issues/13151 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit cd2b74e01e8d5f5b80b82db1cb204c13ed99dd58)
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-234-1/+257
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0445746f6fd96fc7c5394b238153bd2ff22bc5b)
* mediatek: filogic: set DEVICE_DTS_LOADADDR for BPi-R3Daniel Golle2023-07-221-0/+1
| | | | | | | | U-Boot complains that the overlayed DT needs relocation, so set DEVICE_DTS_LOADADDR to have it relocated. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b1d10e0174f71099016a7e6dcd27b65a77fd51b4)
* octeon: ubnt-edgerouter-4/6p: devicetree cleanupCarsten Spieß2023-07-153-30/+10
| | | | | | | | | | | removed redundant eeprom partition nodes from cn7130_ubnt_edgerouter-4.dts and cn7130_ubnt_edgerouter-6p.dts as they are identically defined in cn7130_ubnt_edgerouter-e300.dtsi. Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (integrated eeprom referenced node in the .dtsi) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 700f11aaadb7baa38285ed8f928e976a29a72eed)
* octeon: ubnt-edgerouter-e300: fix missing MTD partitionCarsten Spieß2023-07-151-16/+22
| | | | | | | | | | | | | | | The MAC addresses should be read from 3rd MTD partition, but only two MTD partitions are populated. To fix it, a partitions node has to surround the partition nodes in device tree. Tested with Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (fixed checkpatch complains) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 2b1d7965c7e74e1b31ff29a966eaf6334b0d7057)
* octeon: ubnt-edgerouter-e300: fix LED settingsCarsten Spieß2023-07-151-2/+2
| | | | | | | | | | | | | | LEDs on Edgerouter 6P didn't work correctly: blue /white LED swapped, on/off state inverted Fixed in device tree: swap the GPIO ports for power:blue and power:white LEDs change LED activity from LOW to HIGH Tested on Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (cherry picked from commit 9009672930f7bda99ec8f6f09a92eb49b6c9aac8)
* ib: split out processing user provided packagesTomasz Maciej Nowak2023-07-151-1/+3
| | | | | | | | | | Some device recipes remove default target packages. If user tries to add them back they will be ignored, since packages list is processed in one go. Process the device recipe packages first and do user ones later, so additions won't get filtered out. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit e40b9a7fa002154e85459791101a0444d99dfb86)
* sdk: rename README + update MakefileTomasz Maciej Nowak2023-07-152-1/+1
| | | | | | | | | | | | | 'help' target fails not finding a file, so follow up on a change[2] made as a fix for main README[1]. 1. d0113711a31f ("README: port to 21st century") 2. 751486b31fd9 ("build: fix README.md reference after rename") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit 2d5f7035cf45801158bed6f5d0ac0de0002c1810) (cherry picked from commit e9911f10e482f3174f745a36c0c9fd7964758caf) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* armsr: v8: fix NVMEM_IMX_OCOTP_ELE build errorChristian Lamparter2023-07-151-0/+1
| | | | | | | | | | | there's a new symbol NVMEM_IMX_OCOTP_ELE that needs to be defined. otherwise the build will fail: | i.MX On-Chip OTP Controller support (NVMEM_IMX_OCOTP_ELE) [N/m/y/?] (NEW) | make[6]: *** [scripts/kconfig/Makefile:77: syncconfig] Error 1 | make[5]: *** [Makefile:628: syncconfig] Error 2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: backport DT changes queued for v6.6Rafał Miłecki2023-07-1410-4/+450
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 37ff916af789911fdefb802ce9903e866eb82435)
* mediatek: replace hack for MaxLinear 2.5G PHYDaniel Golle2023-07-133-166/+63
| | | | | | | Replace hack with proper patch also for Linux 5.15. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 712fa3eff82086da8a13e7e5bc577df17892a581)
* mediatek: dts: mt7988a: remove boottrap hackDaniel Golle2023-07-131-5/+0
| | | | | | | | The PHY driver now uses regmap created from pio syscon, we no longer need the boottrap device. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit f321a49fd523a8d393be8e3cd2de41d67855da91)
* mediatek: use backported Ethernet PHY driver also for 5.15Daniel Golle2023-07-134-1345/+1417
| | | | | | | | Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the driver in files-5.15. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9fac59009657068d5a58b3d0255d4ca1507dd457)
* mediatek: dts: mt7988a: wire-up mediatek,pio for PHY LEDsDaniel Golle2023-07-132-1/+2
| | | | | | | | | | | The PHY driver needs to read a register containing the values of the bootstrap pins (which happen to be the PHY LEDs) to determine the LED polarities. Allow regmap access to first pinctrl bank by adding the 'syscon' compatible, and reference the pinctrl in the MDIO bus where the PHY driver will look for it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 1f1e0b1144ebaa4ba8b948a12d989a0a6fc9b76f)
* mediatek: filogic: add H3C Magic NX30 Pro supportChukun Pan2023-07-135-0/+278
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: W25N01GVZEIG 128MB RAM: NT5CB128M16JR-FL 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, WPS Power: DC 12V 1A Flash instructions: 1. PC run command: "telnet 192.168.124.1 99" Username: H3C, password is the web login password of the router. 2. Download preloader.bin and bl31-uboot.fip 3. PC run command: "python3 -m http.server 80" 4. Download files in the telnet window: "wget http://192.168.124.xx/xxx.bin" Replace xx with your PC's IP and the preloader.bin and bl31-uboot.fip. 5. Flushing openwrt's uboot: "mtd write xxx-preloader.bin BL2" "mtd write xxx-bl31-uboot.fip FIP" 6. Connect to the router via the Lan port, set a static ip of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 7. Download initramfs image, reboot router, waiting for tftp recovery to complete. 8. After openwrt boots up, perform sysupgrade. Note: 1. The u-boot-env partition on mtd is empty, OEM stores their env on ubi:u-boot-env. 2. Back up all mtd partitions before flashing. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit e78d1a06c8a47be9ea5a306bfb43f3d7ceb89646)
* mediatek: add support for Netgear EX6250v2 seriesWenli Looi2023-07-134-0/+279
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 73de41898fcd06d837b013449c370c493bcdc595)
* image: add additional fields to Netgear encrypted imageWenli Looi2023-07-132-0/+11
| | | | | | | | | | | | | | | | | These fields are used for EAX12 and EX6250v2 series, and perhaps other devices. Compatibility is preserved with the WAX202 and WAX206. In addition, adds the related vars to DEVICE_VARS so that the variables work correctly with multiple devices. References in GPL source: https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz * tools/imgencoder/src/gj_enc.c Contains code that generates the encrypted image. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 0a1ebccc8702cadc50bc096f1e185472f3927786)
* ath79: DTS improvement for buzzer on RB951G-2HnDPavel Pernička2023-07-121-0/+6
| | | | | | | | | | | Mikrotik RB951 router has a buzzer on the board, which makes annoying noises due to the interference caused by PoE input or Wifi transmission when no GPIO pin state is set. I added buzzer node to device's DTS in order to set deault level to 1 and to provide easier access for it. Signed-off-by: Pavel Pernička <pernicka.pa@gmail.com> (cherry picked from commit dac0a133cf8dbf0bd9afabecdc1092456c451ec7)
* ath79: add support for MikroTik RB951G-2HnDMichał Kępień2023-07-125-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik RB951G-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit 7a709573d7 ("ar71xx: add kernel support for the Mikrotik RB951G board"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8327 switch, 5x 10/100/1000 Mbit/s - 1x PoE in (port 1, 8-30 V input) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 8x LED: - 1x power (green, not configurable) - 1x user (green, not configurable) - 5x GE ports (green, not configurable) - 1x wireless (green, not configurable) - 1x button (restart) Unlike on the RB951Ui-2HnD, none of the LEDs on this device seem to be GPIO-controllable, which was also the case for older OpenWRT versions that supported this board via a mach file. The Ethernet port LEDs are controlled by the switch chip. See https://mikrotik.com/product/RB951G-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień <openwrt@kempniu.pl> (cherry picked from commit db02cecd6ad2e5962e6e9d8307da34855a083ad6)
* ath79: mikrotik: extract common bits for RB951x-2HnD devicesMichał Kępień2023-07-122-80/+83
| | | | | | | | | Mikrotik RouterBOARD 951Ui-2HnD and Mikrotik RouterBOARD RB951G-2HnD are very similar devices. Extract the DTS bits that are identical for these two boards to a separate DTSI file. Signed-off-by: Michał Kępień <openwrt@kempniu.pl> (cherry picked from commit c6ef4170945c6ab5432382110389f31fea92a76c)
* bcm53xx: backport DT changes from v6.5Rafał Miłecki2023-07-1125-9/+4634
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8674b41c0d84f09e14bf8ebe08e1d6dc6ac5fa64)
* kernel: bgmac: fix regressed support for BCM53573 SoCsRafał Miłecki2023-07-101-0/+45
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d54f3b2cfdbd34aa61ca67fd590eebfdf3db51cf)
* bcm47xx: fix bgmac MTU patch filenameRafał Miłecki2023-07-101-0/+0
| | | | | | Fixes: 4970dd027bce ("bcm47xx: revert bgmac back to the old limited max frame size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 83aeb0bbd47638b42ee6cdda351d0c51e014d790)
* kernel: backport NVMEM patches queued for the v6.5Rafał Miłecki2023-07-1013-1/+920
| | | | | | | This includes some driver changes and support for fixed cells layout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 07bdc5551558287f7a99f6ae8e6d82d7d09d5781)
* kernel: net: phy: realtek: fix rtl822x_probe on unsupported devicesMartin Schiller2023-07-082-21/+5
| | | | | | | | | Calling rtl822x_probe() on phy devices which uses the rtl822x_read_mmd() and rtl822x_write_mmd() functions makes no sense and the probe ends with an EOPNOTSUPP error. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 5af7d47cd7fb936dc7d640e1ba63443152d0416a)
* ramips/mt7621: disable the cpufreq driverFelix Fietkau2023-07-081-7/+3
| | | | | | | It causes a noticeable performance decrease Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit dc38199b96ee3ef0ac52873893c42e28fa0564fa)
* kernel: sort generic configurationAleksander Jan Bajkowski2023-07-081-1/+1
| | | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new $ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new $ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 4f197f91342bc5e1f202c091c2c2f90e949d0749)
* kernel: bump 5.15 to 5.15.120John Audia2023-07-085-6/+6
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 0dc0504fc8e5f0c3cafe6c1da7192f51a09c5bc3)
* x86: set CONFIG_X86_AMD_PLATFORM_DEVICEJohn Audia2023-07-082-2/+2
| | | | | | | Needed by AMD processors using Carrizo and later chipsets Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 946100ba4128dbee8faf3c03afb692bca74d75fa)
* mxs: rework image generationZoltan HERPAI2023-07-065-100/+56
| | | | | | | | Migrate to "new" image generation method. Device profiles will be generated based on image/Makefile instead of profiles/ , which will also allow to automatically build images for all supported devices via buildbot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq-wifi: fix upstream board-2.bin ZTE M289F snafuChristian Lamparter2023-07-041-1/+1
| | | | | | | | | | | | | | | | | | | | | The upstream board-2.bin file in the linux-firmware.git repository for the QCA4019 contains a packed board-2.bin for this device for both 2.4G and 5G wifis. This isn't something that the ath10k driver supports. Until this feature either gets implemented - which is very unlikely -, or the upstream boardfile is mended (both, the original submitter and ath10k-firmware custodian have been notified). OpenWrt will go back and use its own bespoke boardfile. This unfortunately means that 2.4G and on some revisions the 5G WiFi is not available in the initramfs image for this device. Fixes: #12886 Reported-by: Christian Heuff <christian@heuff.at> Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d)
* ramips: mt7621: add TP-Link EAP613 v1Sander Vanheule2023-07-034-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP613 v1 is a ceiling-mount 802.11ax access point. It can be powered via PoE or a DC barrel connector (12V). Connecting to the UART requires fine soldering and careful manipulation of any soldered wires. Device details: * SoC: MT7621AT * Flash: 16 MiB SPI NOR * RAM: 256 MiB DDR3L * Wi-Fi: * MT7905DA + MT7975D: 2.4 GHz + 5 GHz (DBDC), 2x2:2 * Two stamped metal antennas (ANT1, ANT2) * One PCB antenna (ANT3) * One unpopulated antenna (ANT4) * Ethernet: * 1× 10/100/1000 Mbps port with PoE * LEDs: * Array of four blue LEDs with one control line * Buttons: * Reset * Board test points: * UART: next to CPU RF-shield and power circuits * JTAG: under CPU RF-shield (untested) * Watchdog: 3PEAK TPV706 (not implemented) Althought three antennas are populated, the MT7905DA does not support the additional Rx chain for background DFS detection (or Bluetooth) according to commit 6cbcc34f50a3 ("ramips: disable unsupported background radar detection"). MAC addresses: * LAN: 48:22:54:xx:xx:a2 (device label) * WLAN 2.4 GHz: 48:22:54:xx:xx:a2 * WLAN 5 GHz: 48:22:54:xx:xx:a3 The radio calibration blob stored in flash also contains valid MAC addresses for both radio bands (OUI 00:0c:43). Factory install: 1. Enable SSH on the device via web interface 2. Log in with SSH, and run `cliclientd stopcs` 3. Upload -factory.bin image via web interface. It may be necessary to shorten the filename of the image to e.g. 'factory.bin'. Recovery: 1. Open the device by unscrewing four screws from the backside 2. Carefully remove board from the housing 3. Connect to UART (3.3V): * Find test points labelled "VCC", "GND", "UART_TX", "UART_RX" * Solder wires to test points or connect otherwise. Be careful not to damage the PCB e.g. by pulling on soldered wires. * Open console with 115200n8 settings 4. Interrupt bootloader and use tftpboot to start an initramfs: setenv ipaddr $DEVICE_IP setenv serverip $SERVER_IP tftpboot 84000000 openwrt-initramfs-kernel.bin bootm DO NOT use saveenv to store modified u-boot environment variables. The environment is saved at flash offset 0x30000, which erases part of the (secondary) bootloader. The device uses two bootloader stages. The first stage will load the second stage from a uImage stored at flash offset 0x10000. In case of a damaged second stage, the first stage should allow uploading a new image via y-modem (untested). Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 11588c52b47c2c3b2cdc7849ce9e4804bfdb8bb5)
* mediatek: define NMBM management region for WAX220David Bauer2023-07-021-0/+5
| | | | | | | | | The NETGEAR WAX220 employs NMBM on SPI-NAND. In order to avoid dealing with invalid factory data, enable NMBM in the area preceding the UBI volume. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 92eec257dd562547bc08ee76c1901eb22b66937c)
* generic: filter out CONFIG_FRAME_WARNRobert Marko2023-07-021-0/+1
| | | | | | | | | | | | | | CONFIG_FRAME_WARN value is set by config/Config-kernel.in based on the target type dynamically since commit: 16a2051 ("kernel: Set CONFIG_FRAME_WARN depending on target"). However, CONFIG_FRAME_WARN was not set to get filtered out so it ended up in multiple target configs during refreshes. So, lets filter out CONFIG_FRAME_WARN as its set dynamically to prevent it ending up in more target configs. Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 7a9a4168bb7f4b77c300afb99c163c793305e84f)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 03:18:12 +0000