aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* base-files: fix Linksys upgrade, restore config stepMichael Trinidad2023-04-112-2/+2
| | | | | | | | | | | | | It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This corrects a typo in the call of nand_do_upgrade_failed for ipq40xx and ipq806x devices using the linksys.sh script. Fixes: 8634c1080d50 ("ipq40xx: Fix Linksys upgrade, restore config step") Fixes: 2715aff5df83 ("ipq806x: Fix Linksys upgrade, restore config step") Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
* mvebu: cortexa9: fix Linksys upgrade, restore config stepMichael Trinidad2023-04-111-1/+6
| | | | | | | | | | | | It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This restores the preservation of configs for mvebu/cortexa9 devices using the linksys.sh script. Fixes: e25e6d8e5407 ("base-files: fix and clean up nand sysupgrade code") Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
* kirkwood: fix Linksys upgrade, restore config stepMichael Trinidad2023-04-111-1/+6
| | | | | | | | | | | | | | It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This restores the preservation of configs for kirkwood devices using the linksys.sh script. Fixes: e25e6d8e5407 ("base-files: fix and clean up nand sysupgrade code") Fixes: #12298 Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
* bcm53xx: switch to Kernel 5.15 by defaultPaul Spooren2023-04-101-2/+1
| | | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org> Tested-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: switch to Kernel 5.15 by defaultPaul Spooren2023-04-101-2/+1
| | | | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org> [rmilecki: tested on GT-AC5300: boot, sysupgrade & 940 Mbps NAT] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: dts: add missing phy modesÁlvaro Fernández Rojas2023-04-105-0/+17
| | | | | | PHY modes should be defined in the device tree for the bcm63xx internal switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove source-only flagÁlvaro Fernández Rojas2023-04-101-1/+1
| | | | | | | | bmips target is now more stable and it's time to start generating buildbot images in order to receive a wider testing, which will be essential to replace bcm63xx target in the future. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add subtargets for each SoCÁlvaro Fernández Rojas2023-04-1049-382/+2037
| | | | | | | | BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: b43-sprom: fix build when SSB/BCMA disabledÁlvaro Fernández Rojas2023-04-101-16/+16
| | | | | | Fix build of B43 SPROM fallback when SSB or BCMA are disabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: allow disabling mdio-mux-bcm6368Álvaro Fernández Rojas2023-04-101-0/+10
| | | | | | This controller is only present on SoCs with B53 MMAP switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: disable CONFIG_HW_RANDOM_BCM2835Álvaro Fernández Rojas2023-04-101-0/+1
| | | | | | This HW RNG is present on some Broadcom 63XX SoCs, but not all of them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.15 to 5.15.106John Audia2023-04-097-218/+5
| | | | | | | | | | | | | | | | | | Removed upstreamed: generic/735-net-ethernet-mtk_eth_soc-fix-flow_offload-related-re.patch[1] pending-5.15/350-mips-bmips-BCM6358-disable-RAC-flush-for-TP1.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.106&id=76f09582a191dcf11118fd4bdbf50f538c90fa8d 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/mips/bmips?h=v5.15.106&id=65b723644294f1d79770704162c0e8d1f700b6f1 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod, ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* bmips: switch to LED kernel modulesÁlvaro Fernández Rojas2023-04-093-13/+19
| | | | | | | Disable LED controllers from kernel config and switch to per device kernel modules. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add LED kernel modulesÁlvaro Fernández Rojas2023-04-091-0/+30
| | | | | | | Add BCM6328 and BCM6358 LED kernel modules. This allows selecting the LED controllers only for those devices using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Sercomm SHG2500Álvaro Fernández Rojas2023-04-096-1/+776
| | | | | | | | Sercomm SHG2500 is a BCM63168 with 128M of RAM, 256M of NAND, an external BCM53124S switch for the LAN ports and internal/external Broadcom wifi. LEDs are connected to an external MSP430G2513 MCU controlled via SPI. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: use sercomm-pid scriptÁlvaro Fernández Rojas2023-04-092-21/+14
| | | | | | | Make use of sercomm-pid script for generating the Sercomm PID, which avoids having to add an array of hex bytes for every new Sercomm device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: image: rename SERCOMM_VERSION to SERCOMM_FSVERÁlvaro Fernández Rojas2023-04-092-7/+7
| | | | | | | SERCOMM_VERSION is ambiguous and it should be more clear that it refers to the version used for the filesystem. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: sercomm-payload: use pide-file argumentÁlvaro Fernández Rojas2023-04-091-1/+1
| | | | | | | Instead of passing an array of hex bytes for the Sercomm PID we can now use the --pid-file parameter. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.10 to 5.10.177John Audia2023-04-088-13/+13
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: lower re305-v3 spi-max-frequencyJoe Mullally2023-04-081-1/+1
| | | | | | | | | | | | | Fix flash I/O instability observed in newer devices with cFeon QH64A-104HIP (detected as en25qh64). Ref: https://forum.openwrt.org/t/support-for-tp-link-re305-v3/75893/91 Reported-by: Dimitri Souza <dimitri.souza@gmail.com> Tested-by: Dimitri Souza <dimitri.souza@gmail.com> Signed-off-by: Joe Mullally <jwmullally@gmail.com> [alter commit-message - target master] Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: refresh patchesDavid Bauer2023-04-082-3/+3
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add support for Enterasys WS-AP3715iDavid Bauer2023-04-0812-2/+507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: don't compress kernel image for WS-AP3825iDavid Bauer2023-04-081-1/+1
| | | | | | | The kernel is already compressed with XZ by the bootwrapper, thus we gain nothing by compressing it a second time. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: reserve upper 1MB of RAM for WS-AP3825iDavid Bauer2023-04-081-1/+2
| | | | | | | | | | | | The bootpage for the second core is placed by U-Boot in the upper 128k of syste-memory. This could either be a reserved-area or deducted from the total system-memory. As only the latter is parsed by the bootwrapper, reduce the available system memory for linux in order to preserve the bootpage from being overwritten. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: backport bootwrapper patch to kernel 5.10David Bauer2023-04-081-0/+28
| | | | | | | Kernel 5.10 builds currently fail because the patch for using the simpleImage bootwrapper were not added to 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add properties normally added by U-BootDavid Bauer2023-04-081-0/+26
| | | | | | | This adds properties to PCIe as well as ethernet nodes which are normally added by the Extreme Networks U-Boot. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix incorrect CPU node / propertiesDavid Bauer2023-04-081-2/+8
| | | | | | | This adds properties normally filled by U-Boot. Also it fixes the node name, which is incorrectly referring to a P1010 core. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add localbus frequency for WS-AP3825iDavid Bauer2023-04-081-0/+4
| | | | | | This is normally filled by U-Boot. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: add linux,stdout-path for WS-AP3825iDavid Bauer2023-04-081-0/+1
| | | | | | | This is normally filled by U-Boot. Prevents double-printing of early console messages. Also enables debug-output by the zImage wrapper. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: define remapping-range for DAP-X1860David Bauer2023-04-081-0/+7
| | | | | | | | | Prevent the BBT translation layer from remapping the UBI used for storing rootfs. Explicitly define the number of blocks reserved for remapping. Signed-off-by: David Bauer <mail@david-bauer.net>
* octeon: switch to Kernel 5.15 by defaultPaul Spooren2023-04-081-2/+1
| | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kirkwood: switch to Kernel 5.15 by defaultPaul Spooren2023-04-081-2/+1
| | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org>
* tegra: switch to Kernel 5.15 by defaultPaul Spooren2023-04-081-2/+1
| | | | | | | Getting ready for the next release. Acked-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* realtek: Fix typo for EnGenius EWS2910PRaylynn Knight2023-04-071-1/+1
| | | | | | | | Fix mis-typed DEVICE-MODEL in mk file for EnGenius EWS2910P. Signed-off-by: Raylynn Knight <rayknight@me.com> [ fix wrong SoB format and improve commit title/description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: backport NVMEM patch for U-Boot env data "ethaddr" cellRafał Miłecki2023-04-067-21/+183
| | | | | | Adjust our local code to avoid breakage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport NVMEM patches queued for the v6.4Rafał Miłecki2023-04-0646-0/+3960
| | | | | | | | | They add NVMEM layouts support. It allows handling NVMEM content independently of NVMEM device access. Skip U-Boot env data patch for now as it break our downstream MAC hacks. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd fixes for nvmemRafał Miłecki2023-04-065-5/+197
| | | | | | They are needed for NVMEM changes pending for v6.4. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport of_request_module()Rafał Miłecki2023-04-0611-1/+1275
| | | | | | It's needed by NVMEM changes queued for 6.4. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: introduce KERNEL_LOADADDR to Device/Default templateDaniel Golle2023-04-055-16/+7
| | | | | | | | | | | | | | | | | | We need to reset KERNEL_LOADADDR if we use it on a per-device base. Otherwise the previous value will be kept in case a device doesn't define KERNEL_LOADADDR and relies on the default. Move initializing KERNEL_LOADADDR to target/linux/mediatek/image/Makefile, similar to how it's done also on the ramips target. This fixes image size related breakage on devices which rely on the default value of KERNEL_LOADADDR. While at it use 0x48000000 which is more common than the previous default 0x44000000 for the filogic subtarget. Fixed: e7c399bee6 ("filogic: add support for ASUS TUF-AX4200") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: make TUF-AX4200 KERNEL simply expandedDavid Bauer2023-04-041-1/+1
| | | | | | The KERNEL variable was recursively expanded, breaking other devices. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: disable SGMII in-band AN for RealTek 2.5G PHYsDaniel Golle2023-04-031-0/+43
| | | | | | | | | | | | | MAC drivers don't use SGMII in-band autonegotiation unless told to do so in device tree using 'managed = "in-band-status"'. When using MDIO to access a PHY, in-band-status is unneeded as we have link-status via MDIO. Switch off SGMII in-band autonegotiation using magic values. Reported-by: Chen Minqiang <ptpt52@gmail.com> Reported-by: Chukun Pan <amadeus@jmu.edu.cn> Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Tested-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: use genphy_soft_reset for RealTek 2.5G PHYsDaniel Golle2023-04-031-0/+65
| | | | | | | | | Some vendor bootloaders do weird things with those PHYs which result in link modes being reported wrongly. Start from a clean sheet by resetting the PHY. Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: interface mode switch for RTL8221B PHYChukun Pan2023-04-031-0/+61
| | | | | | | | Add dynamic interface mode update for the rtl8221 phy to match various wire speeds. 10M/100M/1000M use SGMII, 2500M uses 2500Base-X. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: refresh patchesDaniel Golle2023-04-032-2/+2
| | | | | | | | Refresh patches which were no longer applying cleanly after a recently added SFP quirk. Fixes: 658b45ce48 ("generic: add quirk for HG MXPD-483II 2500M fiber SFP") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "mpc85xx: remove Watchguard T10 MAC override"David Bauer2023-04-031-0/+5
| | | | | | | | | | This reverts commit aa4a9058fbf4d2ca7ef3af9ebb5bbec896625e93. The assumption the bootloader fills out the MAC-address is not correct. The MAC-address has to be set from userspace based on information found in the device_id partition. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add quirk for HG MXPD-483II 2500M fiber SFPDaniel Golle2023-04-032-3/+16
| | | | | | | | | | | | | | | | | | | The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify: Transceiver type : Ethernet: 1000BASE-LX ... BR, Nominal : 2600MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60 X-Patchwork-Id: 13197378 X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Reported-by: chowtom <chowtom@gmail.com> Tested-by: chowtom <chowtom@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: fix lzma-loader for Netgear DGN 3500(B)Maik Goette2023-04-022-5/+18
| | | | | | | Fixes Uncompressing Kernel Image ... ERROR: LzmaDecode.c, 561 Fixes: #11701 for both 3500(B) Signed-off-by: Maik Goette <github@beeit.de>
* ramips: add support for OrayBox X1Bin We2023-04-024-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for OrayBox X1. It is a 802.11n router, based on MediaTek MT7628N. Specifications: SoC: MediaTek MT7628N (580MHz) RAM: 64 MiB Flash: 16 MiB NOR (Winbond W25Q128JVSIQ) Wireless: 802.11b/g/n 2x2 2.4GHz (Built In) Ethernet: 1x 100Mbps only USB: 1x USB Type-A 2.0 Host Port Button: 1x "Reset" button LED: 1x Blue LED + 1x Red LED + 1x White LED Power: 5V Micro-USB input Manufacturer Page: https://pgy.oray.com/router/x1.html/parameter Flash Layout: 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "kpanic" 0x000000040000-0x000000050000 : "factory" 0x000000050000-0x000000fe0000 : "firmware" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "reserve" Install via SSH: Original firmware is based on OpenWRT, but SSH is not start by default, You should enable it first 1. Login into web admin (10.168.1.1), default password is 'admin' 2. Open the following link, and the result should be {"code":0}; SSH is now started, username is root, password is same as web admin password http://10.168.1.1/cgi-bin/oraybox?_api=ssh_set&enabled=1 4. You can flash firmware via mtd: mtd write /tmp/firmware_image.bin firmware Signed-off-by: Bin We <me@udp.pw>
* lantiq: nand: don't yield while holding spinlockThomas Nixon2023-04-022-0/+76
| | | | | | | | | | | | | | | | | | | The nand driver normally while waiting for the device to become ready; this is normally fine, but xway_nand holds the ebu_lock spinlock, and this can cause lockups if other threads which use ebu_lock are interleaved. Fix this by waiting instead of polling. This mainly showed up as crashes in ath9k_pci_owl_loader (see https://github.com/openwrt/openwrt/issues/9829 ), but turning on spinlock debugging shows this happening in other places too. This doesn't seem to measurably impact boot time. Tested on bt_homehub-v5a with 5.10 and 5.15. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> [Add commit description into patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: Fix Linksys upgrade, restore config stepJacob Aharon2023-04-021-1/+6
| | | | | | | | | | | | | | | | | | It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This restores the preservation of configs for ipq806x devices using the linksys.sh script. Other devices and targets have not been examined. This commit uses the same functionality and terminology used in commit 8634c10 ("ipq40xx: Fix Linksys upgrade, restore config step") Fixes: e25e6d8 ("base-files: fix and clean up nand sysupgrade code") Tested-on: EA8500 Signed-off-by: Jacob Aharon <ah.jacob@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 18:35:43 +0000