aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Deactivate CONFIG_COMPATHauke Mehrtens2023-04-293-11/+0
| | | | | | | | | | | | | | This deactivates the CONFIG_COMPAT kernel option. With CONFIG_COMPAT the kernel will provide syscall interfaces for arm32 binaries in addition to the interfaces needed for arm64 binaries. In OpenWrt the complete userspace is compiled for this specific architecture and support for 32 bit ARM applications is not needed. This reduces the size and the attack surface for the systems. On all other targets CONFIG_COMPAT is already deactivated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate CONFIG_LEGACY_PTYSHauke Mehrtens2023-04-2912-24/+0
| | | | | | | | | The legacy (BSD) PTY support could open security problems in a system, We do not need them in OpenWrt, deactivate this option in all targets. Debian also deactivates this option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_ARM64_SW_TTBR0_PANHauke Mehrtens2023-04-294-4/+0
| | | | | | | | | | | | | This activates the CONFIG_ARM64_SW_TTBR0_PAN option for all arm64 kernels by default. The CONFIG_ARM64_SW_TTBR0_PAN option prevents the kernel form accessing user space memory directly. This makes it harder to exploit the kernel. This is activated by default and was already activate on all other arm64 targets before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_HARDENED_USERCOPY for all targetsHauke Mehrtens2023-04-294-4/+0
| | | | | | | | | | | | | | This activates CONFIG_HARDENED_USERCOPY for the remaining targets. This adds additional checks in the copy_from_user() and copy_to_user() functions. This was not activated for ARCHS38 before because of a bug in the Linux kernel 5.4 till 5.14, which as fixed and is described here: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/15 I do not know why this was deactivated for mt7629 and rockchip. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: mt7621: add support for ZyXEL WSM20Andreas Böhler2023-04-296-1/+322
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL WSM20 aka Multy M1 is a cheap mesh router system by ZyXEL based on the MT7621 CPU. Specifications ============== SoC: MediaTek MT7621AT (880MHz) RAM: 256MiB Flash: 128MiB NAND Wireless: 802.11ax (2x2 MT7915E DBDC) Ethernet: 4x 10/100/1000 (MT7530) Button: 1x WPS, 1x Reset, 1x LED On/Off LED: 7 LEDs (3x white, 2x red, 2x green) MAC address assignment ====================== The MAC address assignment follows stock: The label MAC address is the LAN MAC address, the WAN address is read from flash. The WiFi MAC addresses are set in userspace to label MAC + 1 and label MAC + 2. Installation (web interface) ============================ The device is cloud-managed, but there is a hidden local firmware upgrade page in the OEM web interface. The device has to be registered in the cloud in order to be able to access this page. The system has a dual firmware design, there is no way to tell which firmware is currently booted. Therefore, an -initramfs version is flashed first. 1. Log into the OEM web GUI 2. Access the hidden upgrade page by navigating to https://192.168.212.1/gui/#/main/debug/firmwareupgrade 3. Upload the -initramfs-kernel.bin file and flash it 4. Wait for OpenWrt to boot and log in via SSH 5. Transfer the sysupgrade file via SCP 6. Run sysupgrade to install the image 7. Reboot and enjoy NB: If the initramfs version was installed in RAS2, the sysupgrade script sets the boot number to the first partition. A backup has to be performed manually in case the OEM firwmare should be kept. Installation (UART method) ========================== The UART method is more difficult, as the boot loader does not have a timeout set. A semi-working stock firmware is required to configure it: 1. Attach UART 2. Boot the stock firmware until the message about failsafe mode appears 3. Enter failsafe mode by pressing "f" and "Enter" 4. Type "mount_root" 5. Run "fw_setenv bootmenu_delay 3" 6. Reboot, U-Boot now presents a menu 7. The -initramfs-kernel.bin image can be flashed using the menu 8. Run the regular sysupgrade for a permanent installation Changing the partition to boot is a bit cumbersome in U-Boot, as there is no menu to select it. It can only be checked using mstc_bootnum. To change it, issue the following commands in U-Boot: nand read 1800000 53c0000 800 mw.b 1800004 1 1 nand erase 53c0000 800 nand write 1800000 53c0000 800 This selects FW1. Replace "mw.b 1800004 1 1" by "mw.b 1800004 2 1" to change to the second slot. Back to stock ============= It is possible to flash back to stock, but a OEM firmware upgrade is required. ZyXEL does not provide the link on its website, but the link can be acquired from the OEM web GUI by analyzing the transferred JSON objects. It is then a matter of writing the firmware to Kernel2 and setting the boot partition to FW2: mtd write zyxel.bin Kernel2 echo -ne "\x02" | dd of=/dev/mtdblock7 count=1 bs=1 seek=4 conv=notrunc Signed-off-by: Andreas Böhler <dev@aboehler.at> Credits to forum users Annick and SirLouen for their initial work on this device
* kernel: mtk_bmt: refactor to avoid deep recursionMichał Kępień2023-04-291-31/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A Linksys E8450 (mt7622) device running current master has recently started crashing: [ 0.562900] mtk-ecc 1100e000.ecc: probed [ 0.570254] spi-nand spi2.0: Fidelix SPI NAND was found. [ 0.575576] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.583780] mtk-snand 1100d000.spi: ECC strength: 4 bits per 512 bytes [ 0.682930] Insufficient stack space to handle exception! [ 0.682939] ESR: 0x0000000096000047 -- DABT (current EL) [ 0.682946] FAR: 0xffffffc008c47fe0 [ 0.682948] Task stack: [0xffffffc008c48000..0xffffffc008c4c000] [ 0.682951] IRQ stack: [0xffffffc008008000..0xffffffc00800c000] [ 0.682954] Overflow stack: [0xffffff801feb00a0..0xffffff801feb10a0] [ 0.682959] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G S 5.15.107 #0 [ 0.682966] Hardware name: Linksys E8450 (DT) [ 0.682969] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.682975] pc : dequeue_entity+0x0/0x250 [ 0.682988] lr : dequeue_task_fair+0x98/0x290 [ 0.682992] sp : ffffffc008c48030 [ 0.682994] x29: ffffffc008c48030 x28: 0000000000000001 x27: ffffff801feb6380 [ 0.683004] x26: 0000000000000001 x25: ffffff801feb6300 x24: ffffff8000068000 [ 0.683011] x23: 0000000000000001 x22: 0000000000000009 x21: 0000000000000000 [ 0.683017] x20: ffffff801feb6380 x19: ffffff8000068080 x18: 0000000017a740a6 [ 0.683024] x17: ffffffc008bae748 x16: ffffffc008bae6d8 x15: ffffffffffffffff [ 0.683031] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000f00000101 [ 0.683038] x11: 0000000000000449 x10: 0000000000000127 x9 : 0000000000000000 [ 0.683044] x8 : 0000000000000125 x7 : 0000000000116da1 x6 : 0000000000116da1 [ 0.683051] x5 : 00000000001165a1 x4 : ffffff801feb6e00 x3 : 0000000000000000 [ 0.683058] x2 : 0000000000000009 x1 : ffffff8000068080 x0 : ffffff801feb6380 [ 0.683066] Kernel panic - not syncing: kernel stack overflow [ 0.683069] SMP: stopping secondary CPUs [ 1.648361] SMP: failed to stop secondary CPUs 0-1 [ 1.648366] Kernel Offset: disabled [ 1.648368] CPU features: 0x00003000,00000802 [ 1.648372] Memory Limit: none Several factors contributed to this issue: 1. The mtk_bmt driver recursively calls its scan_bmt() helper function during device initialization, while looking for a valid block mapping table (BMT). 2. Commit fa4dc86e98 ("kernel: backport MEMREAD ioctl"): - increased the size of some stack-allocated structures (like struct mtd_oob_ops, used in bbt_nand_read(), which is indirectly called from scan_bmt()), - increased the stack size for some functions (for example, spinand_mtd_read(), which is indirectly called from scan_bmt(), now uses an extra stack-allocated struct mtd_ecc_stats). 3. OpenWrt currently compiles the kernel with the -fno-optimize-sibling-calls flag, which prevents tail-call optimization. Collectively, all of these factors caused stack usage in the mtk_bmt driver to grow excessively large, triggering stack overflows. Recursion is not really necessary in scan_bmt() as it simply iterates over flash memory blocks in reverse order, looking for a valid BMT. Refactor the logic contained in the scan_bmt() and read_bmt() functions in target/linux/generic/files/drivers/mtd/nand/mtk_bmt_v2.c so that deep recursion is prevented (and therefore also any potential stack overflows it may cause). Link: https://lists.openwrt.org/pipermail/openwrt-devel/2023-April/040872.html Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* kernel: Activate CONFIG_SCHED_STACK_END_CHECKHauke Mehrtens2023-04-292-2/+2
| | | | | | | | | | | This activates the CONFIG_SCHED_STACK_END_CHECK option. The kernel will check if the kernel stack overflowed in the schedule() function. This just adds a very small computational overhead. This option is activated in Debian by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_SLAB_FREELIST_HARDENEDHauke Mehrtens2023-04-292-2/+2
| | | | | | | | | | This activates some extra checks in SLAB or SLUB to make it harder to execute kernel heap exploits. This adds a minor performance degradation which I haven't measured-. Many mainstream Linux distributions also activate this option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Initialize RNG using CPU RNG and bootloaderHauke Mehrtens2023-04-292-4/+4
| | | | | | | | | | | | | | | | | | | This activates the following kernel options by default: * CONFIG_RANDOM_TRUST_CPU * CONFIG_RANDOM_TRUST_BOOTLOADER With these option Linux will also use data from the CPU RNG e.g. RDRAND and the bootloader to initialize the Linux RNG if such sources are available. These random bits are used in addition to the other sources, no other sources are getting deactivated. I read that the Chacha mixer isn't vulnerable to injected entropy, so this should not be a problem even if these sources might inject bad random data. The Linux kernel suggests to activate both options, Debian also activates them. This does not increase kernel code size. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: remove mt753x driverFelix Fietkau2023-04-2916-3970/+0
| | | | | | It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: reduce Archer AX23 / MR70X SPI-frequencyDavid Bauer2023-04-272-2/+2
| | | | | | | | | | | | | | It was brought to attention the Archer AX23 v1 fails to read jffs2 data from time to time. While this is not reproducible on my unit, it is on others. Reducing the SPI frequency does the trick. While it worked with at lest 40 MHz, opt for the cautious side and choose a save frequency of 25 MHz. Apply the same treatment to the Mercusys MR70X which uses a similar design just in case. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: Convert incorrect generic/5.15 patches againOlliver Schinagl2023-04-273-0/+47
| | | | | | | | | | | | | | OpenWrt's developer guide prefers having actual patches so they an be sent upstream more easily. However, in the case of hack-5.15 patches which are not meant for upstream, adding proper fields allows for `git am` to properly function. This commit tries to rectify that, by digging in the history to find where and how it was first added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: fix external interrupt controllerÁlvaro Fernández Rojas2023-04-271-21/+2
| | | | | | | | | - irq_domain_add_simple() can't be used on bmips since interrupts aren't hardcoded with specific offsets for internal and external as opposed to bcm63xx. This is needed to avoid collisions with other interrupts. - remove unused bcm63xx-specific code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: document GPIO external interruptsÁlvaro Fernández Rojas2023-04-2712-11/+51
| | | | | | | BCM63xx SoCs have an external interrupt controller which can be used for specific GPIO keys. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: increment polled keys interval to 100Álvaro Fernández Rojas2023-04-279-9/+9
| | | | | | | There's no need to poll the gpio keys every 20 ms and the linux kernel documentation suggests 100 ms. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: ssb: fallback-sprom: check bustypeÁlvaro Fernández Rojas2023-04-241-2/+7
| | | | | | host_pci is only defined when bustype is SSB_BUSTYPE_PCI. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bcma: fallback-sprom: check hosttypeÁlvaro Fernández Rojas2023-04-241-2/+7
| | | | | | host_pci is only defined when hosttype is BCMA_HOSTTYPE_PCI. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bcma: fallback-sprom: align extraction with upstreamÁlvaro Fernández Rojas2023-04-241-355/+134
| | | | | | | | The current bcma SPROM extraction from upstream only supports SPROMs with revisions from 8 to 11. Let's align the downstream fallback driver with upstream. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: ssb: fallback-sprom: drop mac leftoversÁlvaro Fernández Rojas2023-04-241-12/+0
| | | | | | This was left behind when removing the MAC extractions from PCI SPROMs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: ssb: fallback-sprom: optimize struct dataÁlvaro Fernández Rojas2023-04-241-14/+14
| | | | | | | - Remove unneeded mac bytes from struct (it's already present in the SPROM). - Convert devid_override to boolean. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bcma: fallback-sprom: optimize struct dataÁlvaro Fernández Rojas2023-04-241-14/+14
| | | | | | | - Remove unneeded mac bytes from struct (it's already present in the SPROM). - Convert devid_override to boolean. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq40xx: convert GL-AP1300 to DSANick Hainke2023-04-244-6/+37
| | | | | | | | | | Convert GL-AP1300 to DSA and enable it. While working on it rename the GL-AP1300 leds from green to white. Tested-by: Rob White <rob@blue-wave.net> Tested-by: Robert Sommer <frauhottelmann@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: create APBoot-compatible image for Aruba AP-175Martin Kennedy2023-04-241-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As was done in commit e11d00d44c66 ("ath79: create Aruba AP-105 APBoot compatible image"), alter the Aruba AP-175 image generation process so OpenWrt can be loaded with the vendor Aruba APBoot. Since the remainder of the explanation and installation process is identical, continuing the quote from that commit: This works by prepending the OpenWrt LZMA loader to the uImage and jumping directly to the loader. Aruba does not offer bootm on these boards. This approach keeps compatibility to devices which had their U-Boot replaced. Both bootloaders can boot the same image. With this patch, new installations do not require replacing the bootloader and can be performed from the serial console without opening the case. Installation ------------ 1. Attach to the serial console of the AP-175. Interrupt autoboot and change the U-Boot env. $ setenv apb_rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x84000000 ap175.bin; go 0x84000040" $ setenv apb_fb_openwrt "cp.b 0xbf040000 0x84000000 0x10000; go 0x84000040" $ setenv bootcmd "run apb_fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap175.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run apb_rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* kernel: net: phy: realtek: fix NULL pointer dereferenceDaniel Golle2023-04-243-34/+42
| | | | | | | | | | | | | The previous attempt to replace an open coded paged read in the RealTek Ethernet PHY driver was too naive and resulted in breaking the r8169 PCIe Ethernet driver which also makes use of the RealTek Ethernet PHY driver. Fix this by instead of using the (not yet populated) paged operations rather use rtl821x_write_page and protect the whole paged read operation using the MDIO bus mutex. Fixes: 998b973157 ("kernel: net: phy: realtek: improve RealTek 2.5G PHY driver") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix green LED for D-Link DAP-X1860Sebastian Schaper2023-04-241-4/+9
| | | | | | | | | | | It was found this device uses a single tri-color power/status LED rather than individual red/orange LEDs, which also supports green. Add GPIO for green color and use with `boot` and `running` aliases. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: Cudy X6 fixes / improvementsFelix Baumann2023-04-243-16/+19
| | | | | | | | | | | | | | | | | | | | | | - Correct WiFi MACs, they didn't match oem firmware - Move nvmem-cells to bdinfo partition and remove &bdinfo reference - Add OEM device model name R13 to SUPPORTED_DEVICES This allows sysupgrading from Cudy's OpenWrt fork without force - Label red_led and use it during failsafe mode and upgrades MAC addresses as verified by OEM firmware: use address source LAN b4:4b:d6:2d:c8:4a label WAN b4:4b:d6:2d:c8:4b label + 1 2g b4:4b:d6:2d:c8:4a label 5g b6:4b:d6:3d:c8:4a label + LA-Bit set + 4th oktet increased The label MAC address is found in bdinfo 0xde00. Signed-off-by: Felix Baumann <felix.bau@gmx.de> [read wifi mac from flash offset] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for Alcatel HH40VAndreas Böhler2023-04-234-0/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Alcatel HH40V is a CAT4 LTE router used by various ISPs. Specifications ============== SoC: QCA9531 650MHz RAM: 128MiB Flash: 32MiB SPI NOR LAN: 1x 10/100MBit WAN: 1x 10/100MBit LTE: MDM9607 USB 2.0 (rndis configuration) WiFi: 802.11n (SoC integrated) MAC address assignment ====================== There are three MAC addresses stored in the flash ROM, the assignment follows stock. The MAC on the label is the WiFi MAC address. Installation (TFTP) =================== 1. Connect serial console 2. Configure static IP to 192.168.1.112 3. Put OpenWrt factory.bin file as firmware-system.bin 4. Press Power + WPS and plug in power 5. Keep buttons pressed until TFTP requests are visible 6. Wait for the system to finish flashing and wait for reboot 7. Bootup will fail as the kernel offset is wrong 8. Run "setenv bootcmd bootm 0x9f150000" 9. Reset board and enjoy OpenWrt Installation (without UART) =========================== Installation without UART is a bit tricky and requires several steps too long for the commit message. Basic steps: 1. Create configure backup 2. Patch backup file to enable SSH 3. Login via SSH and configure the new bootcmd 3. Flash OpenWrt factory.bin image manually (sysupgrade doesn't work) More detailed instructions will be provided on the Wiki page. Tested by: Christian Heuff <christian@heuff.at> Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ath79: use gpios for switch management in WZR-HP-G300NH variantsTony Ambardar2023-04-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The RTL8366S/RB switch node in DTS defines "mii-bus = <&mdio0>" to permit management via SMI but this has likely never worked, instead falling back to using GPIOs in the past: rtl8366s switch: cannot find mdio bus from bus handle (yet) rtl8366s switch: using GPIO pins 19 (SDA) and 20 (SCK) rtl8366s switch: RTL8366 ver. 1 chip found Recently, the rtl8366s and rtl8366_smi drivers were changed from built-in to loadable modules. This affected driver probing order and caused switch initialization (and network access) to fail: rtl8366s switch: using MDIO bus 'ag71xx_mdio' rtl8366s switch: unknown chip id (ffff) rtl8366s switch: chip detection failed, err=-19 Force using GPIOs to manage the switch by dropping the "mii-bus" DTS definition, which works for both built-in and loadable switch drivers. Fixes: 6e0f0eae5b ("ath79: use rtl8366s and rtl8366_smi as a module") Fixes: 575ec7a4b1 ("ath79: use rtl8366rb as a module") Tested-by: Tony Ambardar <itugrok@yahoo.com> # WZR-HP-G300NH (RTL8366S) Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ath79: fix switch support for WZR-HP-G300NH devicesTony Ambardar2023-04-231-1/+2
| | | | | | | | | | | | Switch drivers for RTL8366S/RB were packaged as modules but not properly added to device definitions for WZR-HP-G300NH router variants, breaking network access to both after installation or upgrade. Assign the correct switch driver package for each router. Fixes: 6e0f0eae5b ("ath79: use rtl8366s and rtl8366_smi as a module") Fixes: 575ec7a4b1 ("ath79: use rtl8366rb as a module") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ramips: fix lzma-loader for buffalo_WSR_600DHPHaoan Li2023-04-231-0/+1
| | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of similar devices. Fixes: #11919 Signed-off-by: Haoan Li <lihaoan1001@163.com>
* bmips: shg2500: add BCM4360 fallback SPROMÁlvaro Fernández Rojas2023-04-232-2/+16
| | | | | | | | Apart from the embedded BCM63268 wireless, this device has an external BCM4360 connected by PCIe which needs a fallback SPROM. b43 isn't enabled for this device because BCM4360 isn't supported (AC PHY). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dgnd3700v2: add b43 wireless driverÁlvaro Fernández Rojas2023-04-231-0/+1
| | | | | | | | Apart from the embedded BCM6362 wireless, Netgear DGND3700v2 has external BCM43228 wireless connected by PCIe. Fallback SPROM isn't needed for this one because it has a physical SPROM. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: leds-sercomm-msp430: improve driverÁlvaro Fernández Rojas2023-04-231-3/+7
| | | | | | | - Add missing module functions. - Fix infinite pattern trigger by converting negative values to 0. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enet: add missing module functionsÁlvaro Fernández Rojas2023-04-232-3/+14
| | | | | | | | | - Add missing MODULE_DEVICE_TABLE(). - Switch bcm6348-iudma to module_platform_driver(). - Add missing MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE and MODULE_ALIAS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: pci: use standard module functionsÁlvaro Fernández Rojas2023-04-233-24/+21
| | | | | | | late_initcall_sync() is no longer needed so standard module functions can be used on all bmips PCI/PCIe drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop custom b43-sprom fixupsÁlvaro Fernández Rojas2023-04-232-1199/+0
| | | | | | b43-sprom fixups and no longer used and can be removed from bmips targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to generic bcma/ssb fallback SPROMÁlvaro Fernández Rojas2023-04-2312-64/+12
| | | | | | | | Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add bcma/ssb fallback SPROM supportÁlvaro Fernández Rojas2023-04-236-3/+1841
| | | | | | | This adds generic kernel support for Broadcom Fallback SPROMs so that it can be used in any target, even non Broadcom ones. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: 5.15: replace ramips AR8033 fiber patch with 5.18 patchesDaniel Kestrel2023-04-225-184/+375
| | | | | | | | | | | | A patch was added in kernel 5.4 to support the fiber operation of AR8033 with ramips devices. In kernel 5.18 similar enhancements were added to the kernel. Those patches are required for other fiber based devices but when added, build fails for ramips targets. This commit removes the ramips patch and adds the kernel 5.18 ones. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de> [ split commit,refresh patch and improve commit message ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.10: replace ramips AR8033 fiber patch with 5.18 patchesDaniel Kestrel2023-04-226-184/+456
| | | | | | | | | | | | A patch was added in kernel 5.4 to support the fiber operation of AR8033 with ramips devices. In kernel 5.18 similar enhancements were added to the kernel. Those patches are required for other fiber based devices but when added, build fails for ramips targets. This commit removes the ramips patch and adds the kernel 5.18 ones. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de> [ split commit, refresh patch and improve commit title ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.10: replace pending 730-net-phy-at803x-fix... with upstreamChristian Marangi2023-04-2210-32/+34
| | | | | | | | | Replace pending 730-net-phy-at803x-fix-feature-detection.patch with upstream version and move it to backport. Refresh other related patch while moving it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: refresh 729-net-phy-realtek-introduce-rtl822x_probe.patchDaniel Golle2023-04-221-7/+7
| | | | | | | The patch needs to be refreshed to apply cleanly. Fixes: 998b973157 ("kernel: net: phy: realtek: improve RealTek 2.5G PHY driver") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for TP-Link TL-XDR4288/608xChukun Pan2023-04-228-4/+543
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128MB RAM: ESMT M15T4G16256A 512MB Ethernet (Max Speed): XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan WiFi: XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R) XDR6086/XDR6088: WiFi1: MT7976GN 2.4GHz 4T4R WiFi2: MT7976AN 5GHz 4T4R Button: Reset, WPS, Turbo USB: 1 x USB 3.0 Power: DC 12V 4A Flash instructions: 1. Execute the following operation to open nc shell: https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting 2. Replace the stock bootloader to OpenWrt's: dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip 3. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 4. Download the initramfs image, and restart the router, waiting for tftp recovery to complete. 5. After openwrt boots up, perform sysupgrade. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> [Add uboot build, fit and sysupgrade support, fix RealTek PHYs] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: net: phy: realtek: improve RealTek 2.5G PHY driverDaniel Golle2023-04-228-31/+251
| | | | | | | | | | | | | | | | | | | | * use interface mode switching only when operating in C45 mode Linux prevents switching the interface mode when using C22 MDIO, hence use rate-adapter mode in case the PHY controlled via C22. * use phy_read_paged where appropriate * use existing generic inline functions to handle 10GbE advertisements instead of redundantly defining register macros in realtek.c which are not actually vendor-specific. * make sure 10GbE advertisement is valid, preventing false-positive warning "Downshift occurred from negotiated speed 2.5Gbps to actual speed 1Gbps, check cabling!" with some link-partners using 1G mode. * Support Link Down Power Saving Mode (ALDPS) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.178John Audia2023-04-2218-110/+41
| | | | | | | | | | | Removed upstreamed: backport-5.10/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1] 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.178&id=0279e82e148407feec88466990de14bcba9e12c0 All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.108John Audia2023-04-2225-195/+41
| | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1] backport-5.15/612-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=85d7a7044b759d865d10395a357632af00de5867 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=906a6689bb0191ad2a44131a3377006aa098af59 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: update nvmem cell mac-address-ascii supportChukun Pan2023-04-212-42/+52
| | | | | | | | Instead of use mac-address-ascii in nvmem_get_mac_address function, move it into of_get_mac_addr_nvmem function to support more devices. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: MSG1500 X.00: switch to mac-address-ascii dtsChukun Pan2023-04-213-17/+30
| | | | | | | | The Config partition of some machines is special, and the openwrt script cannot read the protest_lan_mac correctly. This problem can be solved by reading the mac address (ascii) in dts. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: remove redundant code for tuf-ax4200Chukun Pan2023-04-211-2/+1
| | | | | | Remove redundant code in 02_network. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: move mac address setting togetherChukun Pan2023-04-211-4/+6
| | | | | | Simultaneously sort in the order of letters. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 22:18:25 +0000