aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: fix mtk dsa tag paddingFelix Fietkau2023-03-023-9/+7
| | | | | | | | | The padding intended to avoid corrupted non-zero padding payload was accidentally adding too many padding bytes, tripping up some setups. Fix this by using eth_skb_pad instead. Fixes #11942. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: add mt7986 offload firmwareFelix Fietkau2023-03-021-1/+1
| | | | | | | This is needed for WED support on MT7986. Enable it by default for the filogic subtarget. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt7621: move uboot-envtools to DEFAULT_PACKAGESBjørn Mork2023-03-012-178/+194
| | | | | | | | | Several devices depend on fw_printenv during sysupgrade. Make sure it always is present in all images, including initramfs images built by the buildbots. Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: rt5350: enable lzma-loader for ALLNET ALL5003Sergio Paracuellos2023-03-011-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
* kernel: bump 5.15 to 5.15.96John Audia2023-02-2823-24/+24
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.95John Audia2023-02-2817-292/+297
| | | | | | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/807-v6.1-0003-nvmem-core-add-error-handling-for-dev_set_name.patch[1] bcm47xx/patches-5.15/070-net-bgmac-fix-BCM5358-support-by-setting-correct-fla.patch[2] Added fix: backport-5.15/883-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=14eea6449473c1f55e196cc104ba16d144465869 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=2603a5ca6223bb3a88814e2728335eec14f715ab 3. https://lore.kernel.org/stable/20230227211548.13923-1-kuniyu@amazon.com Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* bcm47xx: fix bgmac support for BCM5358Rafał Miłecki2023-02-274-0/+244
| | | | | | | Fix two long-standing regressions. Fixes: https://github.com/openwrt/openwrt/issues/8278 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: add pending devices supportRafał Miłecki2023-02-274-0/+252
| | | | | | This includes Lines E2500 V2 and Huawei B593u-12. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: reorder MIPS BCM47XX patchesRafał Miłecki2023-02-2712-36/+36
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* octeontx: add f2fs and ext4 supportTim Harvey2023-02-262-1/+4
| | | | | | | | Add both ext4 and f2fs support for overlayfs. The fstools mount_root application will choose f2fs if the overlay volume space available exceeds 100MB, otherwise ext4 is used. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: add default packages for on-board devicesTim Harvey2023-02-261-0/+4
| | | | | | | | | | | | | | | The Gateworks Newport boards supported by the octeontx target have the following on-board devices: - Gateworks System Controller - GPIO buttons - GPIO leds - GPS PPS - Accelerometer - MCP251X CAN controller Add kernel drivers for these devices in DEFAULT_PACKAGES Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5Tomasz Maciej Nowak2023-02-265-9/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Forward-port from ar71xx target the board introduced in commit eb9e3651dd1a (" ar71xx: add support for the MikroTik RB911-2Hn/5Hn boards"). Citing: The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet).[1] * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably.[2] End of citation. Follow intallation instruction from that commit message, using openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-initramfs-kernel.bin and openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-squashfs-sysupgrade.bin images found in ath79/mikrotik directory. Be advised that the board accepts 10-30 V on PoE input. Known issues Compared to ar71xx target image, there is still small leak of current to user LED, which makes it lit, although weaker, even if brightness is set to 0. The cause of that is still unknown. 1. https://github.com/openwrt/openwrt/pull/3652 2. RB911-5HnD should work with this commit or with [1], depending on what flash topology was used. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: mikrotik: stack ar9344 devices to single dtsiTomasz Maciej Nowak2023-02-265-271/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of boards from MikroTik with AR9344 SoC (supported and un-supported) replicate the same schematic, so stack common device nodes to a single dtsi. ar9344_mikrotik_routerboard-16m-nor.dtsi: - remove include paragraph and wmac node, make it single nor flash node for others dts to include ar9344_mikrotik_routerboard-lhg-5nd.dts: - move all of the nodes to new file ar9344_mikrotik_routerboard.dtsi and leave only power, user and lan LEDs which differ from sxt-5nd-r2 and other yet unsupported devices ar9344_mikrotik_routerboard-sxt-5n.dtsi: - remove, it made no sense to keep it, as only ar9344_mikrotik_routerboard-sxt-5nd-r2.dts included this file and added only compatible and model ar9344_mikrotik_routerboard-sxt-5nd-r2.dts: - include ar9344_mikrotik_routerboard.dtsi - add nand gpio activating node, beeper, additional LEDs and flash chips which previously have been in ar9344_mikrotik_routerboard-sxt-5n.dtsi ar9344_mikrotik_routerboard.dtsi: - inherited most of the content from ar9344_mikrotik_routerboard-lhg-5nd.dts except three LEDs - add wmac node, removed from ar9344_mikrotik_routerboard-16m-nor.dtsi Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-2626-27/+0
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* bcm53xx: Add D-Link DWL-8610AP board settingsLinus Walleij2023-02-261-0/+3
| | | | | | | | The D-Link DWL-8610AP does not make use of the B53 switch like most equipment. It lies dormant and the machine is using eth0 and eth1 directly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* bcm53xx: Add support for D-Link DWL-8610APLinus Walleij2023-02-261-0/+25
| | | | | | | | The D-Link DWL-8610AP is a pretty straight-forward BC53016 device, D-Link has invented a firmware package format which is a tar file, and we implement this for the factory image. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* sunxi: enable CONFIG_NVMEM_SYSFSJan-Niklas Burfeind2023-02-262-1/+1
| | | | | | | | | | in both the stable and the testing kernel h2+/h3/h5 devices have a Secure ID that can be read from `/sys/bus/nvmem/devices/sunxi-sid0/nvmem`. Enabling CONFIG_NVMEM_SYSFS grants sysfs access from userspace. Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* x86: remove bootloader upgrade from preinitTomasz Maciej Nowak2023-02-262-20/+1
| | | | | | | | | This hack was to bring all existing installations to the newest GRUB version as fast as possible. Since 19.07.x is EoL we can assume this task is completed. Now sysupgrade will solely be responsible for bootloader upgrade. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: add support for Buffalo LinkStation LS220DEDaniel González Cabanelas2023-02-266-0/+428
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Buffalo LinkStation LS220DE is a dual bay NAS, based on Marvell Armada 370 Hardware: SoC: Marvell Armada 88F6707 CPU: Cortex-A9 800 MHz, 1 core Flash 1: SPI-NOR 1 MiB (U-Boot) Flash 2: NAND 512 MiB (OS) RAM: DDR3 256 MiB Ethernet: 1x 1GbE USB: 1x 2.0 SATA: 2x 3Gb/s LEDs/Input: 5x / 2x (1x button, 1x slide-switch) Fan: 1x casing Flash instructions, from hard drive: 1. Get access to the "boot" partition at the hard drive where the stock firmware is installed. It can be done with acp-commander or by plugging the hard drive to a computer. 2. Backup the stock uImage: mv /boot/uImage.buffalo /boot/uImage.buffalo.bak 3. Move and rename the Openwrt initramfs image to the boot partition: mv openwrt-initramfs-kernel.bin /boot/uImage.buffalo 4. Power on the Linkstation with the hardrive inside. Now Openwrt will boot, but still not installed. 5. Connect via ssh to OpenWrt: ssh root@192.168.1.1 6. Rename boot files inside boot partition mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo /mnt/uImage.buffalo.openwrt.bak mv /mnt/initrd.buffalo /mnt/initrd.buffalo.bak 7. Format ubi partitions at the NAND flash ("kernel_ubi" and "ubi"): ubiformat /dev/mtd0 -y ubidetach -p /dev/mtd1 ubiformat /dev/mtd1 -y 8. Flash the sysupgrade image: sysupgrade -n openwrt-squashfs-sysupgrade.bin 9. Wait until it finish, the device will reboot with OpenWrt installed on the NAND flash. Restore the stock firmware: 1. Take the hard drive used for the installation and restore boot backup files to their original names: mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo.bak /mnt/uImage.buffalo mv /mnt/initrd.buffalo.bak /mnt/initrd.buffalo 2. Boot from the hard drive and perform a stock firmware update using the Buffalo utility. The NAND will be restored to the original state. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* octeontx: switch to Kernel 5.15Tim Harvey2023-02-263-474/+1
| | | | | | Switch over from testing version. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: Alternative name Asus RT-AC750L for Asus RT-AC1200V2Karl Chan2023-02-261-0/+2
| | | | | | | | The Asus RT-AC750L is identical to the already supported Asus RT-AC1200V2. Use the ALT0 buildroot tags to show both devices. Reference : https://forum.openwrt.org/t/asus-rt-ac750l-is-the-same-as-rt-ac1200-v2/151783 Signed-off-by: Karl Chan <exkc@exkc.moe>
* ipq40xx: Linksys MR8300: fix the USB port powerDaniel González Cabanelas2023-02-251-1/+11
| | | | | | | | | | | | | The USB port on the MR8300 randomly fails to feed bus-powered devices. This is caused by a misconfigured pinmux. The GPIO68 should be used to enable the USB power (active low), but it's inside the NAND pinmux. This GPIO pin was found in the original firmware at a startup script in both MR8300 and EA8300. Therefore apply the fix for both boards. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ramips: correct the PCIe port number for some mt7621 devicesFelix Baumann2023-02-252-2/+2
| | | | | | | | | | | | | | | | | | | | MT7621 uses a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Netgear R6220, WAC104 and WNDR3700 v5. According to bootlog, MT7612E (5GHz) is connected to pcie0, and MT7603E (2GHz) is connected to pcie2: [2.758986] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) [2.772862] mt7621-pci 1e140000.pcie: PCIE0 enabled [2.782579] mt7621-pci 1e140000.pcie: PCIE2 enabled ... [3.009151] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [3.125715] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Tested-by: Maximilian Baumgartner <aufhaxer@googlemail.com> Signed-off-by: Shiji Yang <yangshiji66@qq.com> [felix.bau@gmx.de: adjust commit message for Netgear devices] Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* mvebu: setup effective thermal zones on Puzzle M901 and M902Daniel Golle2023-02-253-30/+70
| | | | | | | Assign fan with 4 active cooling levels to be used for the main CPU as well as external SerDes units. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: puzzle: fix fan thermal cooling driverDaniel Golle2023-02-252-46/+110
| | | | | | | | | | | | Several fixes for the Puzzle WT61P803 hwmon driver were needed to make it behave well as thermal cooling device: - wire-up cooling device with OF node in device tree - properly parse cooling-levels (u32 with range check vs. u8) - actually use cooling-levels - keep current state and only write to uC if state has changed (avoids flooding the uC with commands which will result in uC crashing) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for GL.iNet GL-X1200Xinfa Deng2023-02-256-1/+296
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for GL-X1200. Specification: - SOC: QCA9563 (775MHz) - Flash: 16 MiB - RAM: 128 MiB DDR2 - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: QCA9563(2.4GHz) and QCA9886(5GHz) - SIM: 2x SIM card slots - MicroSD: 1x microSD slot - Antenna: 2x external 5dBi antennas - USB: 1x USB 2.0 port - Button: 1x reset button - LED: 16x LEDs (3x GPIO controllable) - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) - OEM U-Boot supplies HTTP/GUI access Implementation Notes ==================== Both the NOR and NAND variants boot off a NOR-based kernel, consistent with the OEM's firmware. The mode LEDs are * Boot, Running system * Failsafe 2G * Upgrade 5G Installation ============ Using sysupgrade ---------------- sysupgrade may be used to install a NAND image on a device running a NAND image or a NOR image on a device running a NOR image. It is recommended to *not* preserve config when upgrading from OEM firmware or previous versions of OpenWrt. No supported sysupgrade path should require "force". Transitioning from NOR to NAND can be accomplished Using U-Boot ------------ The OEM U-Boot can be put into a graphical, firmware-upload mode by holding down the button on the side of the router while applying power and for a bit more than five seconds following with the current OEM U-Boot. The power LED will come on, then the 5G LED will flash five times, about once a second. When the 5G LED stops flashing and the 2G LED lights solid, the router's U-Boot will provide an upload page at http://192.168.1.1/ Either a browser may be used to upload an image, or a utility such as curl may be used: curl -X POST -F gl_firmware=\@*-nand-squashfs-factory.img \ http://192.168.1.1/index.html or curl -X POST -F gl_firmware=\@*-nor-squashfs-sysupgrade.bin \ http://192.168.1.1/index.html Note that NOR vs. NAND is based on the file name extension. Signed-off-by: Xinfa Deng <xinfa.deng@gl-inet.com>
* bcm47xx: switch default kernel to the 5.15Rafał Miłecki2023-02-241-2/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: relocate LZMA loader #2Rafał Miłecki2023-02-241-2/+2
| | | | | | | | | | | | | | | | | | | | Increased size of the 5.15 kernel requires bumping BZ_TEXT_START again. Without this CFE hangs at the: Starting program at 0x80001000 This fixes booting 5.15 based mips74k images on: 1. BCM4706 (Luxul XWR-1750) 2. BCM5357B0 (Linksys E1000 V2.1) 3. BCM47186B0 (Luxul XWR-600) 4. BCM5358 (Linksys E2500 V3) It isn't needed but also doesn't break: 1. BCM5354 (Asus WL-500gP V2) Ref: 4cd97e476089 ("bcm47xx: relocate LZMA loader") Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add CONFIG_PPC_QUEUED_SPINLOCKS configuration optionHauke Mehrtens2023-02-232-1/+1
| | | | | | | | | | The CONFIG_PPC_QUEUED_SPINLOCKS configuration option is not defined for kernel 5.15, it is defined for kernel 5.10. This fixes the compilation of mpc85xx/p2020 with kernel 5.15. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport NVMEM late fixes from v6.2Rafał Miłecki2023-02-2310-16/+282
| | | | | | | They were backported to stable kernels but we backport more stuff on our own so we have to pick up few remaining. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: switch default kernel to 5.15Nick Hainke2023-02-221-2/+1
| | | | | | | | | | The default kernel should be switched to 5.15 in order to enable testing by a broader audience. Tested on TP-Link TL-WDR4900 v1. Acked-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mvebu: mochabin: enlarge PCI memory windowRobert Marko2023-02-211-0/+1
| | | | | | | | | | | | | | | | Armada 7040 uses a rather small 15MB memory window for every PCI adapter, however this is not sufficient for Qualcomm QCA6390 802.11ax cards that are shipped along with the OpenWrt WLAN model of MOCHAbin as ath11k requires at least 16MB of memory. So, similar to what MACCHIATOBin has been doing for years, lets move to using the second PCIe 2 memory window and expand it to 128MB to make it future proof. This has been already sent upstream [1]. [1] https://lore.kernel.org/linux-arm-kernel/20230219121418.1395401-1-robert.marko@sartura.hr/ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: update NVMEM subsystem to the v6.3Rafał Miłecki2023-02-2124-0/+2664
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mcp85xx: Switch TP-Link TL-WDR4900 v1 to DSAPawel Dembicki2023-02-208-25/+105
| | | | | | | | | This patch introduces DSA support for TP-Link TL-WDR4900 v1 switch. Swconfig driver for QCA8327 switch is removed because this router is only one device which use Qualcom swconfig switch. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Nick Hainke <vincent@systemli.org> # TP Link WDR4900 v1 (5.15)
* mpc85xx: refresh kernel configPawel Dembicki2023-02-202-27/+15
| | | | | | It was done by "make kernel_oldconfig" command for 5.10 and 5.15. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* toolchain: remove installing twice in the "initial" subdirAndre Heider2023-02-191-1/+0
| | | | | | | | | | | | | | | | This was apparently introduced to recreate the toolchain (wipe staging_dir/toolchain*, but keep build_dir/toolchain*, followed by a `make toolchain/compile`). But it leaves leftovers and causes re-links to happen at src_install phase, because of the changed paths, possibly adding yet another source of issues. With the prior commits removing various hacks related to the "initial" folder we can remove installing it twice altogether. The recreated toolchain is exactly the same as before. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ramips: add alternative device name for Wiflyer WF3526-PShiji Yang2023-02-191-0/+2
| | | | | | | | | Wiflyer WF3526-P and Zbtlink ZBT-WE1326 have the same circuit design. Installing the misunderstading firmware of ZBT-WE3526 will cause Wi-Fi not work due to allocate the wrong pcie port. Add alternative name to help users easily build or download the correct firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: correct the PCIe port number for Zbtlink ZBT-WE1326Shiji Yang2023-02-191-2/+2
| | | | | | | | | | | | | | | | | MT7621 gets a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Zbtlink ZBT-WE1326. According to the bootlog, MT7612E (5 GHz) is connected to pcie1, and MT7603E (2 GHz) is connected to pcie2: [4.197658] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [4.204609] mt7621-pci 1e140000.pcie: PCIE1 enabled [4.209476] mt7621-pci 1e140000.pcie: PCIE2 enabled ... [4.307988] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [4.367206] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* tools/squashfs: rename to squashfs3-lzmaChristian Marangi2023-02-181-1/+1
| | | | | | | | | | | | | | | | The name of squashfs is confusing since in reality it's a really old version using an old lzma library. This tools is used for old ath79 netgear target and to produde a fake squasfs3 image needed for some specific bootloader from some OEM (AVM for example) Rename squashfs tool to squasfs3-lzma to better describe it. Rename the installed bin from mksquashfs-lzma to mksquashfs3-lzma. Use tar transform to migrate the root directory in tar to the new naming. Drop redundant PKG_CAT variable not needed anymore. Also update any user of this tool. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: chromium: Enable kmod-ramoops by defaultBrian Norris2023-02-181-1/+5
| | | | | | | | Chromium devices (like Google WiFi) have ramoops memory reserved by the bootloader. Let's enable the ramoops kernel module by default, so we get better crash logging. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ipq806x: chromium: Enable kmod-ramoops by defaultBrian Norris2023-02-181-1/+5
| | | | | | | | Chromium devices (like OnHub) have ramoops memory reserved by the bootloader. Let's enable the ramoops kernel module by default, so we get better crash logging. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ramips: add support for Huasifei WS1208V2Arınç ÜNAL2023-02-183-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a Quectel RM520N-GL cellular modem which supports QMI and MBIM modes. Specifications: - MT7621AT, 256 MiB RAM, 16 MiB SPI Flash - MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN - Quectel RM520N-GL Cellular Modem - 2 WLAN & 4 Cellular Antennas - 5 Gigabit Ethernet Ports - 1 USB 2.0 port - 1 PCI-E Slot - 1 M.2 slot - 1 SIM card slot - 1 SD card slot Installation: - Install sysupgrade image via ROOter OS. TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* kernel: bump 5.10 to 5.10.168John Audia2023-02-189-82/+14
| | | | | | | | | | | | | | | | | | Manually rebased: backport-5.10/804-v5.14-0001-nvmem-core-allow-specifying-of_node.patch Removed upstreamed: generic-backport/807-v5.17-0003-nvmem-core-Fix-a-conflict-between-MTD-and-NVMEM-on-w.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.168&id=34ec4c7831c416ac56619477f1701986634a7efc Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: add label MAC address for EPG600 and ESR600Michael Pratt2023-02-181-0/+1
| | | | | | | set label mac for the current ESR600 and new EPG600 using the board.d scripts Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: add support for Senao Engenius EPG600Michael Pratt2023-02-183-0/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: A8J-EPG600 Engenius EPG600 is an indoor wireless router with 1 Gb ethernet switch, dual-band wireless, internal antenna plates, USB, and phone lines (not supported) this board is a Senao device: the hardware is equivalent to EnGenius ESR600 (except for phone lines) the software is Senao SDK which is based on openwrt and uboot which uses the legacy Senao header with Vendor / Product IDs to verify the firmware upgrade image. **Specification:** - MT7620 SOC MIPS 24kec, 2.4 GHz WMAC, 2x2 - RT5592N WLAN PCI chip, 5 GHz, 2x2 - QCA8337N Gb SW RGMII GbE, SW P0 -- SOC P5, 5 LEDs - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 64 MB RAM NT5TU32M16 - UART console J2, populated - USB 2.0 port direct to SOC - 6 GPIO LEDs power, 2G, 5G, wps2g, wps5g, line - 3 buttons reset, wps, "reg" (registeration) - 4 antennas internal omni-directional plates NOT YET SUPPORTED: VoIP - Si3050-FT + Si3019-FT Voice DAA, SPI control, PCM data - Phone Ports "TEL", "LINE" RJ11, 4P2C (2 pins) **MAC addresses:** MAC address labeled as MAC ADDRESS MACs present in both wifi cal data and uboot environment eth0.1/phy1 ---- *:82 rf 0x4 phy0 ---- *:83 factory 0x4 eth0.2 MAC *:b8 "wanaddr" **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.0.1 username and password 'admin' Navigate to gear icon, "Device Management", "Tools" select the factory.dlf image Upload and verify checksum Method 2: Serial to upload initramfs: Follow directions for TFTP recovery upload and boot initramfs and do a sysupgrade **TFTP recovery:** Requires UART serial console, reset button does nothing rename initramfs-kernel.bin to 'uImageEPG600' make available on TFTP server at 192.168.99.8 power board, interrupt boot with "4" execute `tftpboot` and `bootm` (with the load address) **Return to OEM:** Images from OEM are provided, but not compatible with openwrt sysupgrade. So it must be modified. Alternatively, back up all mtd partitions before flashing **Note on switch registers:** The necessary registers needed for the QCA8337 switch can be read from interrupted boot (tftpboot, bootm) by using the following lines in the switch driver ar8327.c in the function 'ar8327_hw_config_of' where 'qca,ar8327-initvals' is parsed from DTS before the new register values are written: pr_info("0x04 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD0_MODE)); pr_info("0x08 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD5_MODE)); pr_info("0x0c %08x\n", ar8xxx_read(priv, AR8327_REG_PAD6_MODE)); pr_info("0x10 %08x\n", ar8xxx_read(priv, AR8327_REG_POWER_ON_STRAP)); Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: mt7620: split gsw hw_init to mac_init, ephy_initMichael Pratt2023-02-181-16/+24
| | | | | | | | | | | | | | | | | | | in order for the option ephy-disable to work without also needing ephy-base option, we have to skip all the lines that write to mdio addresses that assume those addresses do not have an external switch. Otherwise, ephy ports will be disabled in hardware, but register writes still happen as if they are enabled. Split the functions so that other things are done first, and ephy port setup can be skipped with a simple "return". Tested on Engenius EPG600 (MT7620A ver:2 eco:3) with QCA8337 external switch Ref: cc6fd6fbb505 ("ramips: mt7620: add ephy-disable option to switch driver") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ipq807x: Add bluetooth driver to zyxel nbg7815Karol Przybylski2023-02-181-1/+2
| | | | | | | | | | Zyxel NBG7815 supports bluetooth with blsp1_uart3. Configuration are already added to dts file, device needs only module to working bluetooth properly. Tested at below posts: https://forum.openwrt.org/t/openwrt-support-for-armor-g5-nbg7815/98598/259?u=itork Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Karol Przybylski <karol.przybylski@esm-technology.pl>
* ramips: fix the name of ASUS AX54 because it has dupilcated twiceKarl Chan2023-02-181-5/+3
| | | | | | The name of ASUS AX54 has dupilcated in the DEVICE_ALT0_VENDOR/DEVICE_ALT0_MODEL Signed-off-by: Karl Chan <exkc@exkc.moe>
* mediatek: add support for Netgear WAX206Marcel Ziswiler2023-02-185-1/+591
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MediaTek MT7622BV * RAM: DDR3 512 MiB (Nanya NT5CC256M16ER-EK) * Flash: SPI-NAND 256 MiB (Toshiba TC58CVG1S3HRAIJ) * Wi-Fi 2.4/5 GHz 4T4R: * 2.4 GHz: MediaTek MT7622BV * 5 GHz: MediaTek MT7915AN/MT7975AN * Ethernet: 4x 10/100/1000 Mbps LAN, 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221B PHY) * Switch: MediaTek MT7531AE * LEDs/Keys: 8/1 (Power, Internet, LAN1, LAN2, LAN3, LAN4, Wifin and Wifia dual-colour LEDs + Reset pin) * UART: Marked J19 on board VCC GND TX RX, beginning from "1". 3.3v, 115200n8 * Power: 12 VDC, 2.5 A Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * U-Boot allows booting an initramfs image via TFTP as follows: setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.100 tftpboot openwrt-mediatek-mt7622-netgear_wax206-initramfs-recovery.itb bootm Known Limitations: * The 2.5G WAN port labeled 'wan' only works for speeds up to 1G at the moment. If connected to a multi-gig port the speed has to be manually set to 1G/full either for the switch port or in OpenWrt. For example add the following to /etc/rc.local to set it on boot: /usr/sbin/ethtool -s wan speed 1000 duplex full Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to WAX206 GPL source: https://www.downloads.netgear.com/files/GPL/WAX206_V1.0.4.0_Source.rar * openwrt/target/linux/mediatek/dts/mt7622-netgear-wax206.dts DTS file for this device. * openwrt/target/linux/mediatek/image/mt7622.mk Image creation code for this device Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [fix WAN port (1G only), adjust partition layout, adjust image creation] Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
* kernel: bump 5.15 to 5.15.94John Audia2023-02-1819-73/+73
| | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-09 00:06:11 +0000