aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.175John Audia2023-03-2036-210/+134
| | | | | | | | | | | | | | Manually rebased: backport-5.10/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch Removed upstreamed: bcm47xx/patches-5.10/170-bgmac-fix-initial-chip-reset-to-support-BCM5358.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.175&id=cbf11ff3708ff163387da924f80a47ce7c721e9b Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.173John Audia2023-03-2035-88/+79
| | | | | | | | | Manually rebased: ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: tcindex classifier has been retiredJohn Audia2023-03-201-1/+0
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.10.173&id=18c3fa7a7fdbb4d21dafc8a7710ae2c1680930f6 Signed-off-by: John Audia <therealgraysky@proton.me>
* x86: fix deprecated CONFIG_MICROCODE_OLD_INTERACEJohn Audia2023-03-201-1/+1
| | | | | | | | | | | We use late loading[1] so need to set this option despite upstream adding a kernel taint when this option is set. See discussion in PR#12149 for more details. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.10.173&id2=v5.10.172 1. https://github.com/openwrt/openwrt/blob/master/target/linux/x86/base-files/lib/preinit/02_load_x86_ucode Signed-off-by: John Audia <therealgraysky@proton.me>
* mpc85xx: poll PHY statusDavid Bauer2023-03-202-4/+4
| | | | | | | | | | Disable interrupts for the eth-PHYs, as the interrupts are either not firing or lost within the stack. Switch to polling the PHY status in the meantime until a proper fix is implemented. Ref: https://github.com/openwrt/openwrt/issues/12192 Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: use bootwrapper for ws-ap3825iDavid Bauer2023-03-204-2/+81
| | | | | | | | | | | | | | | The boot-procedure for the Extreme WS-AP3825I is vfragile to put it mildly. It does not relocate the FDT properly. It currently exercises every step manually as well as coming with a pre-padded dtb. Use the PowerPC bootwrapper code for legacy platforms with a pre-filles DTS instead. We still need to ship a fit image to not break the fdt resize / relocate instructions on existing boards. This does not require adapting the U-Boot bootcommand. Ref: https://github.com/openwrt/openwrt/issues/12223 Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: filogic: move ilm, dlm and cpu_boot in dedicated nodesLorenzo Bianconi2023-03-207-0/+522
| | | | | | | | This fixes issues with legacy boot loaders that don't process reserved memory regions outside of system RAM Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move mediatek flow offload refcount fix and fix a logic errorFelix Fietkau2023-03-201-4/+13
| | | | | | | Move it to pending, since it wasn't actually accepted upstream yet. Fixes potential issues when doing offload between multiple MACs. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bmips: dts: fix switch compatible stringsÁlvaro Fernández Rojas2023-03-204-4/+4
| | | | | | Use the proper string for each SoC. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add pending bmips patchesÁlvaro Fernández Rojas2023-03-2015-246/+1109
| | | | | | Add patches sent upstream for bmips and b53 and remove downstream ones. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq807x: add support for Netgear WAX218Alexandru Gagniuc2023-03-206-1/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX218 is a 802.11ax AP claiming AX3600 support. It is wall or ceiling mountable. It can be powered via PoE, or a 12 V adapter. The board has footprints for 2.54mm UART headers. They're difficult to solder because the GND is connected to a large copper plane. Only try soldering if you are very skilled. Otherwise, use pogo pins. Specifications: --------------- * CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz * RAM: 366 MB of RAM available to OS, not sure of total amount * Storage: Macronix MX30UF2G18AC 256MB NAND * Ethernet: * 2.5G RJ45 port (QCA8081) with PoE input * WLAN: * 2.4GHz/5GHz with 8 antennas * LEDs: * Power (Amber) * LAN (Blue) * 2G WLAN (Blue) * 5G WLAN (Blue) * Buttons: * 1x Factory reset * Power: 12V DC Jack * UART: Two 4-pin unpopulated headers near the LEDs * "J2 UART" is the CPU UART, 3.3 V level Installation: ============= Web UI method ------------- Flashing OpenWRT using the vendor's Web UI is problematic on this device. The u-boot mechanism for communicating the active rootfs is antiquated and unreliable. Instead of setting the kernel commandline, it relies on patching the DTS partitions of the nand node. The way partitions are patched is incompatible with newer kernels. Newer kernels use the SMEM partition table, which puts "rootfs" on mtd12. The vendor's Web UI will flash to either mtd12 or mtd14. One reliable way to boot from mtd14 and avoid boot loops is to use an initramfs image. 1. In the factory web UI, navigate to System Manager -> Firmware. 2. In the "Local Firmware Upgrade" section, click Browse 3. Navigate and select the 'web-ui-factory.fit' image 4. Click "Upload" 5. On the following page, click on "Proceed" The flash proceeds at this point and the system will reboot automatically to OpenWRT. 6. Flash the 'nand-sysupgrade.bin' using Luci or the commandline SSH method ---------- Enable SSH using the CLI or Web UI. The root account is locked out to ssh, and the admin account defaults to Netgear's CLI application. So we need to get creative: First, make sure the device boots from the second firmware partition: ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 1 Then reboot the device, and run the update: scp -O -o kexalgorithms=diffie-hellman-group14-sha1 \ -o hostkeyalgorithms=ssh-rsa \ netgear_wax218-squashfs-nand-factory.ubi \ admin@<ipaddr>:/tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/ubiformat /dev/mtd12 -f /tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 0 Now reboot the device, and it should boot into a ready-to-use OpenWRT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Francisco G Luna <frangonlun@gmail.com>
* mpc85xx: fix incorrect kernel targetDavid Bauer2023-03-201-1/+1
| | | | | | | | | | | | | | | The wrapper-image for the WL-WDR4900 was used as a build-target for the kernel. This workd fine as long as only a single wrapper is used with the OpenWrt build-system. If additional wrappers are used, the build becomes racy in the wrapper-stage. The wrapper images actually do not represent a target. They are built based on the kernel configuration. Only copy the resulting images to avoid race-conditions as explained. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: remove Watchguard T10 MAC overrideDavid Bauer2023-03-201-5/+0
| | | | | | | | As the mac-address readout never worked, the mac-address fillout by the bootloader is sufficient. Remove the readout for the Watchguard T10 then. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: fix missing system importDavid Bauer2023-03-201-0/+1
| | | | | | | The mac-address accessor functions were not included in the sourced script. Fix this by importing the correct script path. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Add CONFIG_KERNEL_HARDLOCKUP_DETECTORHauke Mehrtens2023-03-191-0/+1
| | | | | | | Make it possible to change the kernel configuration option CONFIG_HARDLOCKUP_DETECTOR from OpenWrt. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_KCOV=yHauke Mehrtens2023-03-191-0/+1
| | | | | | | This sets the CONFIG_KCOV_IRQ_AREA_SIZE kernel configuration option to its default value. This is shown when I set CONFIG_KERNEL_KCOV=y in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_KASAN=yHauke Mehrtens2023-03-191-0/+2
| | | | | | | | | This deactivates some kernel configuration options I see when CONFIG_KERNEL_KASAN=y is set in the OpenWrt configuration on x86/64. Set CONFIG_STACK_HASH_ORDER to its default value. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Set some options to default shown with CONFIG_KERNEL_UBSAN=yHauke Mehrtens2023-03-191-0/+5
| | | | | | | | This sets some kernel configuration options to their default values. I saw these as warnings when I set CONFIG_KERNEL_UBSAN=y is set in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_DYNAMIC_FTRACE=yHauke Mehrtens2023-03-191-0/+1
| | | | | | | This deactivates some kernel configuration options I see when CONFIG_KERNEL_DYNAMIC_FTRACE=y is set in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_HIST_TRIGGERS=yHauke Mehrtens2023-03-191-0/+2
| | | | | | | This deactivates some kernel configuration options I see when CONFIG_KERNEL_HIST_TRIGGERS=y is set in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_DEBUG_VIRTUAL=yHauke Mehrtens2023-03-191-0/+1
| | | | | | | This deactivates some kernel configuration options I see when CONFIG_KERNEL_DEBUG_VIRTUAL=y is set in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: Deactivate options shown with CONFIG_KERNEL_DEBUG_VM=yHauke Mehrtens2023-03-191-0/+3
| | | | | | | This deactivates some kernel configuratoion options I see when CONFIG_KERNEL_DEBUG_VM=y is set in the OpenWrt configuration on x86/64. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* ipq806x: add support for Nokia Airscale AC400iKristjan Krušič2023-03-196-0/+350
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
* lantiq: xway: add phy reset pin to AVM Fritz!Box 7320Aleksander Jan Bajkowski2023-03-191-0/+17
| | | | | | | | | | This commit adds the PHY reset gpio for the LAN1 port to the dts. According to the GPL sources, gpios 34 and 36 are used on the AVM FritzBox 7320 and 7330. The second port is unsupported. The gpio assignment has been verified on the FritzBox 7330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ipq40xx: mf18a: rename wifi0 calibration variant to ZTE-MF18AChristian Marangi2023-03-181-1/+1
| | | | | | | Rename wifi0 calibration variant to ZTE-MF18A to allign to BDF changes for ZTE MF18A. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: rutx10: Add missing variant to ath10k wifiChristian Marangi2023-03-181-0/+10
| | | | | | | Add missing variant to ath10k wifi to allign to BDF changes for Teltonika RUTX10. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: mf18a: Add missing variant to PCI ath10k cardChristian Marangi2023-03-181-0/+1
| | | | | | | Add missing variant to PCI ath10k card to allign to BDF changes for ZTE MF18A. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 5.15 to 5.15.100John Audia2023-03-18148-964/+391
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0421-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch bcm27xx/patches-5.15/950-0706-media-i2c-imx219-Scale-the-pixel-clock-rate-for-the-.patch ramips/patches-5.15/810-uvc-add-iPassion-iP2970-support.patch Removed upstreamed: bcm27xx/patches-5.15/950-0707-drm-vc4-For-DPI-MEDIA_BUS_FMT_RGB565_1X16-is-mode-1-.patch[1] bcm27xx/patches-5.15/950-0596-drm-vc4-dpi-Add-option-for-inverting-pixel-clock-and.patch[2] ipq807x/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch [3] ipq807x/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch [4] ipq807x/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch [5] ipq807x/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch [6] ipq807x/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch [7] ipq807x/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch [8] ipq807x/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch [9] ipq807x/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch [10] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.99&id=d2991e6b30020e286f2dd9d3b4f43548c547caa6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/gpu/drm/vc4/vc4_dpi.c?h=v5.15.100&id=8e04aaffb6de5f1ae61de7b671c1531172ccf429 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=a55a645aa303a3f7ec37db69822d5420657626da 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=d9df682bcea57fa25f37bbf17eae56fa05662635 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=7e6eeb5fb3aa9e5feffdb6e137dcc06f5f6410e1 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=e88204931d9a60634cd50bbc679f045439c4b91d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=1563af0f28afd3b6d64ac79a2aecced3969c90bf 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=feb8c71f015d416f1afe90e1f62cf51e47376c67 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=69c7a270357a7d50ffd3471b14c60250041200e3 10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=dd3d021ae5471d98adf81f1e897431c8657d0a18 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Tested-by: Robert Marko <robimarko@gmail.com> #ipq807x/Dynalink WRX36 Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, ath79/tl-wdr3600, ipq806x/g10, ipq806x/nbg6817
* kernel: tcindex classifier has been retiredJohn Audia2023-03-181-1/+0
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.15.100&id=7c183dc0af472dec33d2c0786a5e356baa8cad19 Signed-off-by: John Audia <therealgraysky@proton.me>
* x86: set deprecated CONFIG_MICROCODE_OLD_INTERACEJohn Audia2023-03-181-1/+1
| | | | | | | | | | | We use late loading[1] so need to set this option despite upstream adding a kernel taint when this option is set. See discussion in PR#12149 for more details. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.15.100&id2=v5.15.98 1. https://github.com/openwrt/openwrt/blob/master/target/linux/x86/base-files/lib/preinit/02_load_x86_ucode Signed-off-by: John Audia <therealgraysky@proton.me>
* uencrypt: add support for mbedtlsEneas U de Queiroz2023-03-172-3/+3
| | | | | | | | | | | | | | This commit includes some additional changes: - better handling of iv and keys in openssl/wolfssl variants - fix compiler warnings and whitespace - build all 3 variants as separate packages - adjust the new package name in targets' DEVICE_PACKAGES - remove PKG_FLAGS:=nonshared [Beeline SmartBox Flash - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> [after test: replaced a hardcoded IV size of 16 by cipher_info->iv_size] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: update v6.3 of patchesRafał Miłecki2023-03-1712-108/+164
| | | | | | | 1. Use final (accepted) patches 2. Add two more required for v6.4 nvmem stuff Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq40xx: update Crisis Innovation Lab MeshPoint.One BDFMantas Pucka2023-03-171-1/+1
| | | | | | | | | | Make sure it uses updated Jalapeno BDF inherited from Device/8dev_jalapeno-common Fixes: 146eb4925c7f ("ipq40xx: add support for Crisis Innovation Lab MeshPoint.One") Signed-off-by: Mantas Pucka <mantas@8devices.com> [ fix Fixes tag to correct format and fix commit title ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: set specific BDF file for 8devices Habanero/JalapenoMantas Pucka2023-03-171-0/+2
| | | | | | | | | Set specific BDF file for 8devices Habanero/Jalapeno in ipq40xx generic.mk Signed-off-by: Mantas Pucka <mantas@8devices.com> [ split ipq40xx changes in separate commit ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* layerscape: switch to Kernel 5.15 by defaultPaul Spooren2023-03-171-2/+3
| | | | | | | Getting ready for the next release. Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm4908: add HVC workaround for booting kernel 5.15Rafał Miłecki2023-03-161-0/+30
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: include usbport triggerRafał Miłecki2023-03-161-1/+2
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport v6.4 pending DTS changesRafał Miłecki2023-03-1618-2/+1582
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: tweak Kconfig optionsÁlvaro Fernández Rojas2023-03-163-16/+49
| | | | | | Add patch to reduce and improve selected bmips kernel config options. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: irq-bcm6345-l1: register memory regionÁlvaro Fernández Rojas2023-03-161-0/+38
| | | | | | | Add new patch sent upstream for requesting the memory region in the bcm6345-l1 interrupt controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: update patches sent upstreamÁlvaro Fernández Rojas2023-03-162-20/+42
| | | | | | Update bmips patches with the latest version sent upstream Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add support for TP-Link Archer AX23 v1David Bauer2023-03-154-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: MediaTek MT7621 DAT RAM: 128MB DDR3 (integrated) FLASH: 16MB SPI-NOR () WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax SERIAL: 115200 8N1 LEDs - (3V3 - GND - RX - TX) - ETH ports Installation ------------ Upload the factory image using the Web-UI. Web-Recovery ------------ The router supports a HTTP recovery mode by holding the reset-button when powering on. The interface is reachable at 192.168.0.1 and supports installation using the factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* imagebuilder: allow to specific ROOTFS_PARTSIZEPaul Spooren2023-03-141-1/+3
| | | | | | | | | | | Setting this options modifies the rootfs size of created images. When installing a large number of packages it may become necessary to increase the size to have enough storage. This option is only useful for supported devices, i.e. with an attached SD Card or installed on a hard drive. Signed-off-by: Paul Spooren <mail@aparcar.org>
* realtek: switch to Kernel 5.15 by defaultPaul Spooren2023-03-141-2/+1
| | | | | | | | | Getting ready for the next release. Tested-by: Sander Vanheule <sander@svanheule.net> Tested-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath79: fix user LED glow on Mikrotik 911 Lite boardsLech Perczak2023-03-121-1/+1
| | | | | | | | | | GPIO3, to which the user LED is connected on RB911-Lite boards seems to still sink current, even when driven high. Enabling open drain for this pin fixes this behaviour and gets rid of the glow when LED is set to off, so enable it. Fixes: 43c7132bf8e7 ("ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: refactor devolo WiFi pro image definitionsDavid Bauer2023-03-101-18/+11
| | | | | | | | Reuse common parts for the devolo WiFi pro series. The series is discontinued and we support all existing devices, so changes due to new revisions or models are highly unlikely Signed-off-by: David Bauer <mail@david-bauer.net>
* bmips: dts: fix warningsÁlvaro Fernández Rojas2023-03-097-2/+22
| | | | | | | | - Add missing interrupt-parent to ext_intc. - Add missing #address-cells and #size-cells to gpio_cntl. - Use proper gpio handle for gpios (ar-5315u). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvebu: add support for Fortinet FortiGate 50EINAGAKI Hiroshi2023-03-086-0/+588
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820). Specification: - SoC : Marvell Armada 385 88F6820 - RAM : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ") - Flash : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G) - Ethernet : 7x 10/100/1000 Mbps - LAN 1-5 : Marvell 88E6176 - WAN 1, 2 : Marvell 88E1512 (2x) - LEDs/Keys : 18x/1x - UART : "CONSOLE" port (RJ-45, RS-232C level) - port : ttyS0 - settings : 9600bps 8n1 - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC , 8:NC - note : compatible with Cisco console cable - HW Monitoring: nuvoTon NCT7802Y - Power : 12 VDC, 2 A - plug : Molex 5557-02R Flash instruction using initramfs image: 1. Power on FG-50E and interrupt to show bootmenu 2. Call "[R]: Review TFTP parameters.", check TFTP parameters and connect computer to "Image download port" in the parameters 3. Prepare TFTP server with the parameters obtained above 4. Rename OpenWrt initramfs image to "image.out" and put to TFTP directory 5. Call "[T]: Initiate TFTP firmware transfer." to download initramfs image from TFTP server 6. Type "r" key when the following message is showed, to boot initramfs image without flashing to spi-nor flash "Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?" 7. On initramfs image, backup mtd if needed minimum: - "firmware-info" - "kernel" - "rootfs" 7. On initramfs image, upload sysupgrade image to the device and perform sysupgrade 8. Wait ~200 seconds to complete flashing and rebooting. If the device is booted with stock firmware, login to bootmenu and call "[B]: Boot with backup firmware and set as default." to set the first OS image as default and boot it. Notes: - All "SPEED" LEDs(Green/Amber) of LAN and 1000M "SPEED" LEDs(Green) of WAN1/2 are connected to GPIO expander. There is no way to indicate link speed of networking device on Linux Kernel/OpenWrt, so those LEDs cannot be handled like stock firmware. On OpenWrt, use netdev(link) trigger instead. - Both colors of Bi-color LEDs on the front panel cannot be turned on at the same time. - "PWR" and "Logo" LEDs are connected to power source directly. - The following partitions are added for OpenWrt. These partitions are contained in "uboot" partition (0x0-0x1fffff) on stock firmware. - "firmware-info" - "dtb" - "u-boot-env" - "board-info" Image header for bootmenu tftp: 0x0 - 0xf : ? 0x10 - 0x2f : Image Name 0x30 - 0x17f: ? 0x180 - 0x183: Kernel Offset* 0x184 - 0x187: Kernel Length* 0x188 - 0x18b: RootFS Offset (ext2)* 0x18c - 0x18f: RootFS Length (ext2)* 0x190 - 0x193: DTB Offset 0x194 - 0x197: DTB Length 0x198 - 0x19b: Data Offset (jffs2) 0x19c - 0x19f: Data Length (jffs2) 0x1a0 - 0x1ff: ? *: required for initramfs image MAC addresses: (eth0): 70:4C:A5:xx:xx:7C (board-info, 0xd880 (hex)) WAN 1 : 70:4C:A5:xx:xx:7D WAN 2 : 70:4C:A5:xx:xx:7E LAN 1 : 70:4C:A5:xx:xx:7F LAN 2 : 70:4C:A5:xx:xx:80 LAN 3 : 70:4C:A5:xx:xx:81 LAN 4 : 70:4C:A5:xx:xx:82 LAN 5 : 70:4C:A5:xx:xx:83 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: add support for SNR-CPE-ME2-SFPAleksey Nasibulin2023-03-083-0/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME2-SFP is a wireless router with SFP cage manufactured by SNR/NAG company. Specification: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB (GD25Q127CSIG) - RAM: 256 MB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7615DN) - Ethernet: 4x 10/100/1000 Mbps - SFP cage (using RTL8211FS-CG) - USB 3.0 port - Power: 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME2 to recovery mode (press reset button and power on device, hold button for ~10 seconds) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 6A:C4:DD:xx:xx:28 | | Ethernet | + 1 | 6A:C4:DD:xx:xx:29 | | 2g | + 2 | 6A:C4:DD:xx:xx:2A | | 5g | + 3 | 6A:C4:DD:xx:xx:2B | +----------+------------------+-------------------+ Notes: - Reading sfp eeprom is not supported [1] (driver issue). Stock image has the same situation. References: 1. https://forum.openwrt.org/t/mt7621-and-reading-sfp-eeprom/152249 Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
* ipq40xx: convert Netgear EX6100/EX6150 v2 to DSADavid Bauer2023-03-083-5/+19
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 18:08:19 +0000