aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* archs38: switch to kmod-usb2Evgeniy Didin2018-02-141-1/+1
| | | | | | | | | | | We have managed to get USB 2.0 working good enough on all archs38 platforms so we're ready to switch to much faster USB 2.0. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Hauke Mehrtens <hauke@hauke-m.de> CC: John Crispin <john@phrozen.org>
* generic: swconfig: reduce lock duration on sysfs filesKevin Darbyshire-Bryant2018-02-141-8/+12
| | | | | | | | sysfs attributes 'port_mask' & 'speed_mask' held locks whilst doing mundane tasks such as sprintf. Refactor code to reduce length of time locks are held unnecessarily. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* generic: swconfig: add mode led attributeKevin Darbyshire-Bryant2018-02-141-12/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
* mvebu: Migrate uci config to new PCIe pathHauke Mehrtens2018-02-131-0/+41
| | | | | | | | | | | | | | | | | | | | The name of the PCIe controller node in device tree changed between kernel 4.9 and kernel 4.14. Migrate the configuration when an update from kernel 4.9 to 4.14 or back is done to the new name to make the existing wifi configuration compatible with the new names. This replaces the "pcie-controller" part with "pcie" on all nodes if the file exists in sys fs. This is not done in the uci-defualts, because they are getting executed to late in the boot process. The kernel module gets loaded before the uci-defaults scripts are executed. When the mwlwifi driver gets loaded it will trigger an event via hotplug to detect new devices and as the paths are not in the uci configuration they will be added again. When the migration is done before the script will detect that they are already there. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Add support for kernel 4.14Hauke Mehrtens2018-02-1329-0/+3893
| | | | | | | | | | Add support for kernel 4.14 to the mvebu target. This also replaces the old sfp and phylink patches with new versions from Russell's clearfog-4.13 branch http://git.arm.linux.org.uk/cgit/linux-arm.git/log/?h=clearfog-4.13 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: move files to files-4.9 and files-4.4 folderHauke Mehrtens2018-02-134-0/+568
| | | | | | | | This is needed to prevent copying it into kernel 4.14. These device tree files are already integrated into kernel 4.14 and we would like to use the upstream versions only. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: ubifs: create use file system format 4 by defaultHauke Mehrtens2018-02-132-0/+64
| | | | | | | | | | | | | | | | | | | Instead of creating an ubifs file system with format version 5 by default on empty UBI volumes use the older format 4 by default. This will make it possible to mount these file systems also on older kernel versions. When a user wants to do a sysupgrade from kernel 4.14 to kernel 4.9 the old kernel has to read the file system created by the more recent kernel which currently does not work for ubifs. This fixes the problem by creating file systems which are compatible with older kernel versions by default. Kernel 4.14 will still be able to read and write UBI FS file system version 5, it will just not be used when a ubifs partition is created implicitly on an empty UBI volume. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing config optionsHauke Mehrtens2018-02-131-0/+5
| | | | | | These were found when compiling the new octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm63xx: drop root parameter from cmdlineJonas Gorski2018-02-1388-88/+88
| | | | | | | | | | | The root= parameter overrides the automatic rootfs detection by partition name, so drop it. Fixes boot from flash after renumeration changes of partitions due to parser changes. Fixes FS#1350. Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ipq806x: switch to full dual-boot for the nbg6817 sysupgrade supportStefan Lippers-Hollmann2018-02-131-3/+23
| | | | | | | | | | | | | | Instead of writing to the currently booted partition set, this implements full dual-boot support for sysupgrade by always writing to the other, currently inactive, partition set and toggling the dualflag after a successful flash. The currently active/ booted partition set is determined by parsing /proc/cmdline for its rootfs parameter (supplied by the DTS), instead of reading from the 0:DUAL_FLAG mtd, in order to prevent (potentially) bricking both partition sets. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: request the first free loop device dynamically for the nbg6817 ↵Stefan Lippers-Hollmann2018-02-131-4/+5
| | | | | | | | | | | | sysupgrade Instead of hardcoding /dev/loop0, it's safer to query for the first free loop device and assign that dynamically. While /dev/loop0 is a reasonable assumption immediately following "losetup --detach-all", detaching the mounted overlay is no longer strictly necessary once dual-boot support has been added for the nbg6817. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: use absolute the device path in $kernel for the nbg6817 sysupgradeStefan Lippers-Hollmann2018-02-131-4/+4
| | | | | | | Harmonize the variable usage for $kernel and $rootfs to always contain the full device path, instead of just its basename. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ipq806x: support new location of USB PHY kernel moduleLuis Araneda2018-02-131-1/+3
| | | | | | | PHY drivers were grouped into vendor specific directories by upstream commit 0b56e9a7e8358e59b21d8a425e463072bfae523c Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ar71xx: add more registers to ar71x_regs.hJulien Dusser2018-02-133-11/+388
| | | | | | | | | | Add more registers and flags to ar71x_regs.h for QCA955x and QCA956x SoCs. Values come from Qualcomm Atheros u-boot code. Patches can be merged into 622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* ramips: add support for D-Link DAP-1522 A1George Hopkins2018-02-137-9/+173
| | | | | | | | | | | | | | | | | | D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: mtdsplit: split by WRG headerGeorge Hopkins2018-02-131-3/+18
| | | | | | | Support splitting WRG images, which can be found in older D-Link devices. Signed-off-by: George Hopkins <george-hopkins@null.net>
* kernel: add missing symbolJohn Crispin2018-02-132-0/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: Add eTactica EG-200 supportKarl Palsson2018-02-1312-1/+139
| | | | | | | | | | | | | | EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
* ramips: use new image build code for WHR-G300NINAGAKI Hiroshi2018-02-132-42/+21
| | | | | | | | The tftp.bin image for Buffalo WHR-G300N was not built, so I was fixed it after rewriting to new image build code. And the code for factory-EU.bin was broken, so I deleted it. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: remove the CPU_SUBTYPEJohn Crispin2018-02-131-1/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* cns3xxx: remove linux 4.9 supportKoen Vandeputte2018-02-1329-1607/+13
| | | | | | | | - Remove kernel 4.9 support - Apply specific 4.14 changes directly to source - Refreshed all Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add missing symbol for v4.14John Crispin2018-02-131-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* octeontx: add support for OCTEON TX targetTim Harvey2018-02-138-0/+1049
| | | | | | | | | | | The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and periperhals from the Cavium ThunderX SoC. This initial support provides a 4.14 kernel and kernel+initramfs that is bootable on the Gateworks Newport GW630x as well as the Cavium sff8104 reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mxs: rename files to files-4.9Michael Heimpold2018-02-131-0/+0
| | | | | | | | The Device Tree file for I2SE Duckbill boards was updated upstream. Let's use the upstream version for upcoming kernel 4.14 by keeping our current version for v4.9 still around. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ramips: Add support for the GnuBee Personal Cloud TwoRosen Penev2018-02-137-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 3.5" Drives - One SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: Three Ports - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Three GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud Two ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Errata: - While there are three ethernet ports, the third requires support for the second GMAC. This will come in kernel 4.14. - The first hard drive slot has a clearance issue with the two fan headers. Workaround is to pull the headers out and connect the pins to jumper wires. - Using this device as a NAS is problematic with the 4.9 kernel as many /dev/sdX reads throw silent errors. The current theory behind this is some kind of unhandled DMA mapping error in the kernel. This is not an issue with kernel 4.4. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* layerscape: fix call trace of pfe module removingYangbo Lu2018-02-131-14/+5
| | | | | | | | Updated pfe kernel patch to clean up iounmap(pfe->ddr_baseaddr). pfe->ddr_baseaddr was got through phys_to_virt() not ioremap(), so iounmap() for pfe->ddr_baseaddr should be removed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix DPAA2 QDMA issueYangbo Lu2018-02-131-0/+134
| | | | | | | This patch is to reverse a upstream dmatest patch for now which is causing DPAA2 QDMA test issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add a make menuconfig known issue in READMEYangbo Lu2018-02-131-0/+6
| | | | | | | This patch is to add a known issue of make menuconfig in README file. This is also a common issue for OpenWrt. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix type for kernel 4.9 dpaa2_mac_get_stats() functionYangbo Lu2018-02-131-7/+8
| | | | | | | | This patch changes the declarations of ndo_get_stats64 handlers to the previous struct rtnl_link_stats64 * return type instead of the mainline void return. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update READMEYangbo Lu2018-02-131-23/+32
| | | | | | | | Tis patch is to fix up some descriptions in README. Per-device rootfs had been supported, and a known issue had been found. These also should be updated accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: support ubifs rootfsYangbo Lu2018-02-133-10/+37
| | | | | | | | | Some layerscape devices (ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb) were using ext4 rootfs because there were issues using squashfs. This patch is to drop using ext4 rootfs and use ubifs rootfs instead which is more proper for SPI-NOR flash. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB configs for 64-bitYangbo Lu2018-02-131-46/+2
| | | | | | | Removed USB configs for 64-bit device since they're already in kmod package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: remove USB and TI specific configs for 32-bitYangbo Lu2018-02-131-155/+2
| | | | | | | | This patch is to remove USB configs for 32-bit device since they're already in kmod package. Also removed TI platform specific configs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update patches-4.9 to LSDK1712Yangbo Lu2018-02-1333-2062/+5557
| | | | | | | | | | | | | Patches changes - Updated patches-4.9 to NXP LSDK1712 linux-4.9. - Merged changes of patch 303 into integrated patch 201. - Split changes of patch 706 into dpaa part and dpaa2 part, and merged these changes into integrated patches 701 and 705. - Removed patch 819 since ehci-fsl driver could be compiled now. - Refreshed these patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update build guide in READMEYangbo Lu2018-02-131-0/+4
| | | | | | | Added package feeds updating and installing in build guide of README. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ar71xx: add support for TP-Link RE355Henryk Heisig2018-02-1314-5/+99
| | | | | | | | | | | | | | | | | | | | | | | | This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* brcm63xx: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | Now that we have support for it, let's switch to kernel 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: switch to kernel 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | With generic run tested and ac49x compile tested, and no complaints so far, let's switch to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7: fix ac49x compilation with 4.9Jonas Gorski2018-02-121-1/+1
| | | | | | | | This will introduce a warning on 3.18, but fixes an error when compiling for 4.9. Fixes: cf9e0a59aabd ("ar7: add kernel 4.9 support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* Revert "mediatek: activate fpu feature flag"John Crispin2018-02-121-1/+1
| | | | | | | | This reverts commit 3594447a7d0398c55ea78f658b52b7d8084ae9f9. This causes the userland to not come up properly Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: fix sysupgrade from 17.04 for clearfog proJonas Gorski2018-02-111-0/+1
| | | | | | | | | When clearfog was renamed to clearfog pro, it broke sysupgrade from 17.04 as the new images now get rejected as incompatible. Fix this by adding the legacy boardname to the compatible devices. Fixes: ec4a8c6dee81 ("mvebu: ClearFog renamed upstream to ClearFog Pro") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.14 supportJonas Gorski2018-02-11193-0/+23023
| | | | | | | Add support for kernel 4.14. Increases compressed kernel size by ~64k compared to 4.9. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add kernel 4.9 supportJonas Gorski2018-02-11204-0/+23683
| | | | | | | | Add support for kernel 4.9 based on the more upstream comformant partition defintions. Increases compressed kernel size by ~95k compared to 4.4. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: switch to new partition layout specificationJonas Gorski2018-02-1187-863/+1407
| | | | | | | Now that we support parsing the expected upstream definition, update the dts files to it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: enhance dt partitions support to match upstream more closelyJonas Gorski2018-02-111-9/+19
| | | | | | | Partitions are supposed to be enclosed in an extra partitions node. Allow the bcm63xxpart parser to cope with that. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport latest bcm63xx_enet changes from upstreamJonas Gorski2018-02-1111-19/+201
| | | | | | No functional changes, just simple cleanups. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix ephy reset gpio lookupJonas Gorski2018-02-111-1/+1
| | | | | | | The lookup needs to be called just "reset" for the common code. Fixes: 054c0d4e3193 ("brcm63xx: backport mdio-bus reset gpio support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: add missing config symbol ATH79_MACH_CF_E375ACMatthias Schiffer2018-02-112-0/+2
| | | | | Fixes: bf66bb8c96 "ar71xx:add support for COMFAST CF-E375AC" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mediatek: activate fpu feature flagHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | The arm CPUs uses in the supported Mediatket SoCs have a FPU accordingly to the datasheet, activate it also. The CPU subtype "neon-vfpv4" is selected, but the toolcahin generated for this SoC will still be compiled with soft float and not with the hard float ABI as we haven't the fpu feature flag set. If this toolchain is reused by other targets this will even affect other targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: drop OpenMesh A42 board-2.binSven Eckelmann2018-02-111-1/+1
| | | | | | | | | | | The BDFs for OpenMesh A42 were upstreamed [1] to the ath10k-firmware repository and are now part of ath10k-firmware 2018-01-26. The ipq-wifi-openmesh_a42 package can now be dropped because OpenWrt already ships the QCA4019 board-2.bin from this version. [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 14:48:28 +0000