aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* generic: 5.15: add missing tag for some backports patchesChristian Marangi2022-10-182-0/+0
| | | | | | | | Add for mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch and hwmon-lm70-Add-ti-tmp125-support.patch the 5.18 tag as it was merged in kernel 5.18. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add 6.1 tag to upstream patchChristian Marangi2022-10-188-0/+0
| | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: filogic: don't rely on image preset in flash or sysupgradeDaniel Golle2022-10-181-11/+6
| | | | | | | | Instead of trying to figure out the actual root device, just use the kernel 'root' cmdline parameter as a hint to decide which device to flash to. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: use UBI fast map to speed up bootDaniel Golle2022-10-181-0/+1
| | | | | | | Use UBI fast map feature to avoid scanning the whole flash on each boot which takes several seconds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: don't break auxadc without 32k clkDaniel Golle2022-10-181-5/+7
| | | | | | | Make the newly added 32k clock optional for the auxadc driver also used on pre-filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loaderPetr Štetiar2022-10-181-0/+1
| | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of similar devices. References: https://github.com/openwrt/openwrt/issues/10645#issuecomment-1282607274 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add missing config symbols for 5.15Josef Schlehofer2022-10-181-0/+5
| | | | | | | | | | | | When I enabled CONFIG_HOTPLUG_PCI for mvebu platform, it was asking for more symbols. Fixes: Support for PCI Hotplug (HOTPLUG_PCI) [Y/?] y CompactPCI Hotplug driver (HOTPLUG_PCI_CPCI) [N/y/?] n SHPC PCI Hotplug driver (HOTPLUG_PCI_SHPC) [N/y/?] (NEW) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: bump 5.15 to 5.15.74John Audia2022-10-181-6/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* mt7621: netgear_ex6150: fix reboot loop by using LZMA loaderPetr Štetiar2022-10-181-0/+1
| | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of similar devices. Fixes: #10645 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq806x: 5.15: refresh target patchesChristian Marangi2022-10-1712-93/+29
| | | | | | Refresh ipq806x target patches for kernel 5.15. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bcm53xx: 5.10: refresh target patchesChristian Marangi2022-10-171-6/+1
| | | | | | Refresh bcm53xx target patches for kernel 5.10. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.10: refresh hack patchesChristian Marangi2022-10-161-6/+6
| | | | | | Refresh hack patches for kernel 5.10. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.10: refresh backport patchesChristian Marangi2022-10-164-14/+15
| | | | | | Refresh backport patches for kernel 5.10. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: refresh hack patchesChristian Marangi2022-10-161-6/+6
| | | | | | Refresh hack patches for kernel 5.15. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: refresh backport patchesChristian Marangi2022-10-166-58/+28
| | | | | | Refresh backport patches for kernel 5.15. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mpc85xx: fix unset kernel symbolDavid Bauer2022-10-141-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: p1010: make TP-Link WDR4900 v1 build againMatthias Schiffer2022-10-141-3/+17
| | | | | | | Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mpc85xx: add SPI kernel loader for TP-Link TL-WDR4900 v1Matthias Schiffer2022-10-1422-0/+1364
| | | | | | | | | | Similar to the lzma-loader on our MIPS targets, the spi-loader acts as a second-stage loader that will then load and start the actual kernel. As the TL-WDR4900 uses SPI-NOR and the P1010 family does not have support for memory mapping of this type of flash, this loader needs to contain a basic driver for the FSL ESPI controller. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* generic: 5.15: backport qca8k fixup patches for Big-Endian systemsChristian Marangi2022-10-142-0/+251
| | | | | | | | Backport qca8k fixup patches for inband mgmt on Big-Endian systems. This is needed for ath79 and mpc85xx targets that are Big-Endian and use qca8k based switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: mt7623: fix thermal zoneBruno Umuarama2022-10-141-0/+48
| | | | | | | | | | | | | | | | | | | | | Raising the temperatures for passive and active trips. @VA1DER proposed at issue 9396 to remove passive trip. This commit relates to his suggestion. Without this patch. the CPU will be throttled all the way down to 98MHz if the temperature rises even a degree above the trip point, and it was further discovered that if the internal temperature of the device is above the first trip point temperature when it boots then it will start in a throttled state and even $ echo disabled > /sys/class/thermal/thermal_zone0/mode will have no effect. The patch increases the passive trip point and active cooling map. The throttling temperature will then be at 77°C and 82°C, which is still a low enough temperature for ARM devices to not be in the real danger zone, and gives some operational headroom. Signed-off-by: Bruno Umuarama <anonimou_eu@hotmail.com>
* mediatek: clean up mt7622 kernel configFelix Fietkau2022-10-141-5/+2
| | | | | | Remove a few unused options to reduce kernel size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove target specific CONFIG_IKCONFIG linesFelix Fietkau2022-10-1412-24/+0
| | | | | | Use generic configuration for this feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing lockdep config symbols for 5.15Felix Fietkau2022-10-141-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fill wlan device entries in board.json on mt7622Felix Fietkau2022-10-141-0/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* airoha: fix imagebuilder generation by introducing generic targetNick Hainke2022-10-131-0/+1
| | | | | | | | | | | | | | | The generic imagebuilder does not have a generic in the name, although this is the default naming scheme. Apply the same fix as for the octeon target. Thanks to @dangowrt for reporting that the same issues applies also for the airoha target. Before the fix: openwrt-imagebuilder-airoha.Linux-x86_64.tar.xz After: openwrt-imagebuilder-airoha-generic.Linux-x86_64.tar.xz Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm53xx: linksys ea6500-v2: extend RAM to full 256MBAleksey Nasibulin2022-10-132-0/+64
| | | | | | | | | Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM. Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru> [ wrap to 80 columns ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: backport gnu11 upgradeOlliver Schinagl2022-10-136-0/+367
| | | | | | | | | | | Upstream has switched to gnu11 not too long ago. One advantage of backporting this to these older kernels is, that we can encourage and write better upstreamable kernels. E.g. the kernel devs prefer loop declarations. Shrinking the master/local gap will be useful in these cases. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: Fix wrong GPIO for internal status LED on ZTE MF289FGiammarco Marzano2022-10-121-1/+1
| | | | | | | | Change GPIO from 10 to 35 to make it works as expected Fixes: 0de6a3339f1a ("ipq40xx: Add ZTE MF289F") Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq806x: switch to 5.15 kernel by defaultChristian Marangi2022-10-111-2/+1
| | | | | | | Switch to 5.15 kernel by default to promote more wider testing and use better upstream patch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add clk krait fixes/improvement patchChristian Marangi2022-10-112-0/+198
| | | | | | Add various krait fixes patch that correctly bringup mux and cpu clocks. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: enable again usb node for each deviceChristian Marangi2022-10-1121-15/+343
| | | | | | | Usb node now are disabled by default in dtsi. Enable again them in each device dts. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add krait-cc modernization patch and fixupChristian Marangi2022-10-1110-8/+760
| | | | | | | | Add multiple patch for krait-cc modernization and multiple fixup for the driver. Also modify a patch to enable the qsb fixed clock and add pxo to krait-cc node. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add krait clock modernization patchChristian Marangi2022-10-115-0/+282
| | | | | | Backport krait clock modernization patch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: backport qcom clk fixes for krait and hfpllChristian Marangi2022-10-112-0/+127
| | | | | | Backport some qcom clock fixes for krait and hfpll driver. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: renumber tsens patch with new orderChristian Marangi2022-10-112-0/+0
| | | | | | Renumber tsens patch with new order for consistency. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: enable new devfreq scaling driver in configChristian Marangi2022-10-111-1/+3
| | | | | | Enable new devfreq scaling driver in kernel config. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: rework nand_pins for wg2600hp3 dtsChristian Marangi2022-10-111-2/+0
| | | | | | | nand_pins definition is now shipped in ipq8064 dtsi. Rework the nand_pins definition for wg2600hp3 5.15 files. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add boot-partitions binding to fix block warningChristian Marangi2022-10-1110-8/+12
| | | | | | | | | | | | | | The patch has changed implementation and now the binding has changed. Replace the old binding with boot-partitions and reimplement the definition with the new definition. The new definition is: <offset1 size1 offset2 size2 offset3 ...> and now supports sparsed patch. Also add missing binding in some dts and add the backup boot partition to the boot-partitions list. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: remove useless spm patchChristian Marangi2022-10-111-10/+0
| | | | | | | Remove useless spm patch as using the normal qcom,spm compatible is enough to register it with no clks. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace nandc patch with upstream versionChristian Marangi2022-10-114-281/+674
| | | | | | Replace nandc fix patch with upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace fab scaling patch with devfreq driverChristian Marangi2022-10-113-243/+251
| | | | | | Replace fab scaling patch with devfreq driver. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: add new version of cache cpu scaling driverChristian Marangi2022-10-115-1001/+292
| | | | | | | Use a new implementation by using a devfreq driver to scale the shared cache of the krait cpu cores. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: backport devfreq new cpufreq based PASSIVE governorChristian Marangi2022-10-1110-0/+1399
| | | | | | | Backport devfreq new cpufreq based PASSIVE governor needed for devfreq based fab and cache scaling. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace stmmac pcs fix with upstream versionChristian Marangi2022-10-113-83/+261
| | | | | | Replace stmmac pcs fix with upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace gcc fixes with upstream versionChristian Marangi2022-10-1113-272/+1761
| | | | | | Replace gcc patch fixes with upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace lcc patch with upstream versionChristian Marangi2022-10-114-59/+294
| | | | | | Replace lcc patch with proposed upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: replace dtsi patches with upstream versionChristian Marangi2022-10-1148-1179/+1618
| | | | | | | | | Reorganize dtsi patches with upstream version and drop dtsi in 5.15 files. Also add an additional upstream patch for hwspinlock support. Refresh all the dts with needed changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: remove PCI_DOMAINS patch not needed anymoreChristian Marangi2022-10-111-29/+0
| | | | | | | This doesn't cause any panic anymore and no regression are observed with ath10k. Remove this additional patch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: remove qcom adm Documentation patchChristian Marangi2022-10-111-71/+0
| | | | | | | Remove qcom adm Documentation patch that is not needed for the target. Probably a leftover when the adm bus was added, now merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: split files dir to 5.10 and 5.15Christian Marangi2022-10-1164-0/+8525
| | | | | | | In preparation for a cleanup of 5.15 patches copy the files dir to 5.10 and 5.15 kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-08 08:15:14 +0000