aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* brcm47xx: update watchdog driverHauke Mehrtens2012-11-2417-103/+1566
| | | | | | | | This watchdog driver should work with SoC having a PMU. This fixes #11720. SVN-Revision: 34323
* bcm63xx: Add a fixup for rt2x00 devices.Jonas Gorski2012-11-2475-150/+567
| | | | | | | | | This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34322
* bcm63xx: Enable LED pin support for ath9k pci fixup.Jonas Gorski2012-11-2430-46/+146
| | | | | | | | | | Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34321
* bcm63xx: fix spi transfer handlingJonas Gorski2012-11-245-3/+619
| | | | | | | | | | * Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34320
* ar71xx: set pad6 cfg for AR8327 on the AP136 boardGabor Juhos2012-11-232-20/+38
| | | | | | | | | Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34316
* generic: ar8216: set delay values for SGMII mode on AR8327Gabor Juhos2012-11-231-0/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34315
* add preliminary support for muslFlorian Fainelli2012-11-231-0/+4
| | | | | | | | Musl is an alternative C-library, see http://www.musl-libc.org for more infos. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34314
* imagebuilder: merge r25078 to align files/ handling with current buildrootJo-Philipp Wich2012-11-221-0/+8
| | | | SVN-Revision: 34301
* generic: ar8216: introduce ar8216_mib_op helperGabor Juhos2012-11-221-26/+9
| | | | | | | | | | | | | The ar8216_mib_{capture,flush} functions are similar. Move the common code into a helper and use that from the original functions. This change also fixes a lockdep warning in ar8216_mib_flush. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34297
* swconfig: make it compatible with 3.7Gabor Juhos2012-11-213-3/+63
| | | | | | | | | | | | | | | | | | | swconfig does not compile with 3.7 because struct netlink_notify->pid has been renamed to struct netlink_notify->portid and struct genl_info->snd_pid has been renamed to struct genl_info->snd_portid Use the new names and add compatibility patches to 3.3 and 3.6. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34288
* adds proper package selection for dgn3500John Crispin2012-11-211-1/+1
| | | | SVN-Revision: 34286
* cns21xx: add support for 3.6Gabor Juhos2012-11-2019-0/+7822
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34285
* generic: add some missing symbols for 3.7Gabor Juhos2012-11-201-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34284
* generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'Gabor Juhos2012-11-201-1/+3
| | | | | | | | Also add a WARN_ON to 'ar8216_mib_fetch_port_stat' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34283
* generic: ar8216: remove an unblanced mutex_unlock callGabor Juhos2012-11-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following warning: [ 94.080000] [ 94.080000] ===================================== [ 94.080000] [ BUG: bad unlock balance detected! ] [ 94.080000] 3.3.8 #2 Tainted: G O [ 94.080000] ------------------------------------- [ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at: [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] but there are no more locks to release! [ 94.080000] [ 94.080000] other info that might help us debug this: [ 94.080000] 2 locks held by swconfig/1220: [ 94.080000] #0: (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34 [ 94.080000] #1: (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4 [ 94.080000] [ 94.080000] stack backtrace: [ 94.080000] Call Trace: [ 94.080000] [<8028dc58>] dump_stack+0x8/0x34 [ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc [ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8 [ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394 [ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214 [ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8 [ 94.080000] [<80222440>] genl_rcv+0x24/0x34 [ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c [ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0 [ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c [ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270 [ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c [ 94.080000] [<8006ad78>] stack_done+0x20/0x40 [ 94.080000] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34282
* generic: ar8216: add missing locking callsGabor Juhos2012-11-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following lockdep warning: [ 19.160000] ------------[ cut here ]------------ [ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4() [ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7 crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 19.210000] Call Trace: [ 19.220000] [<8028dc38>] dump_stack+0x8/0x34 [ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4 [ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24 [ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4 [ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0 [ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98 [ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460 [ 19.250000] [<8008a630>] worker_thread+0x22c/0x334 [ 19.260000] [<8008e544>] kthread+0x88/0x90 [ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18 [ 19.270000] [ 19.270000] ---[ end trace 22e9d696adfa6a08 ]--- Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34281
* generic: convert yaffs to use kuid_t and kgid_t on 3.6+Gabor Juhos2012-11-206-22/+1162
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34280
* ar71xx: make rb750_nand driver compatible with 3.7Gabor Juhos2012-11-204-17/+131
| | | | | | | | | Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34279
* ar71xx: make ar934x_nfc driver compatible with 3.7Gabor Juhos2012-11-204-14/+59
| | | | | | | | | Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34278
* ar71xx: refresh rb4xx_nand patchGabor Juhos2012-11-201-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34277
* ar71xx: remove buffer verification reference from rb4xx_nand.cGabor Juhos2012-11-201-3/+0
| | | | | | | | It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34276
* ar71xx: fix GPIO function selection for AR934xGabor Juhos2012-11-206-14/+222
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34275
* ar71xx: restore rb4xx kernel partition size to the original valueGabor Juhos2012-11-201-1/+1
| | | | | | | | | The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34274
* ar71xx: install lzma compressed elf kernel image from wget2nandGabor Juhos2012-11-201-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34273
* ar71xx/image: provide lzma compressed elf kernel imageGabor Juhos2012-11-201-0/+2
| | | | | | | | This will be used on the RB4xx/RB7xx/RB2011 boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34272
* ar71xx/image: relink loader.elf image to LOADADDRGabor Juhos2012-11-202-5/+21
| | | | | | | | | This allows to load the resulting image directly from RouterBOOT. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34271
* ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350Gabor Juhos2012-11-202-0/+10
| | | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270
* mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHzGabor Juhos2012-11-201-0/+1
| | | | | | | | | [juhosg: move ramips specific stuff into a followup patch] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34269
* refresh all kernel configurationsGabor Juhos2012-11-204-9/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34267
* Revert "target specific patches have nothing to do in generic.."Jonas Gorski2012-11-191-0/+0
| | | | | | | | | | | | | | This reverts commit r34230, as it is causing build failures: make[3] -C package/mtd compile imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory compilation terminated. make[4]: *** [imagetag.o] Error 1 Any patches modifying exported kernel headers need to reside in generic as toolchain/kernel-headers only applies generic patches. SVN-Revision: 34255
* fix 820-usb_add_usb_find_device_by_name.patchImre Kaloz2012-11-191-6/+6
| | | | SVN-Revision: 34254
* kernel: refresh patchesHauke Mehrtens2012-11-182-2/+2
| | | | SVN-Revision: 34253
* brcm47xx: add support for kernel 3.6Hauke Mehrtens2012-11-1844-0/+7700
| | | | | | This is based on the patch by Peter Wagner. SVN-Revision: 34252
* kernel: add missing generic config options for 3.6+Hauke Mehrtens2012-11-182-0/+6
| | | | SVN-Revision: 34250
* kernel: add CONFIG_XZ_DEC=y to genericHauke Mehrtens2012-11-183-3/+3
| | | | | | CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved. SVN-Revision: 34249
* ar71xx: use custom LZMA dictionary size for WNDR3700 imagesGabor Juhos2012-11-181-4/+4
| | | | | | | | Based on a patch by Hannu Nyman. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34248
* add 3.7-rc6 support (patch 820 still has to be fixed)Imre Kaloz2012-11-18150-0/+26067
| | | | SVN-Revision: 34247
* generic: ar8216: add MIB counter support for the AR8216 switch as wellGabor Juhos2012-11-182-1/+89
| | | | | | | | Thanks to Jonas Gorski for the reference URL. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34245
* generic: ar8216: rename AR8216_*_STATS_* definesGabor Juhos2012-11-182-82/+82
| | | | | | | | | | | The names are misleading, those are only valid from AR8236. The AR8216 chip uses different offsets. Thanks to Jonas Gorski for the report. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34244
* generic ar8216: allow to read/reset MIB counters via swconfigGabor Juhos2012-11-182-7/+492
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34243
* generic: ar8216: use dynamically allocated private data in ar8216_probeGabor Juhos2012-11-181-3/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34242
* ar71xx: add user-space support for the RB435G boardGabor Juhos2012-11-182-0/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34240
* ar71xx: add kernel support for the RB435G boardGabor Juhos2012-11-183-0/+49
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34239
* ar71xx: update PCI IRQ map for RB4xx devicesGabor Juhos2012-11-181-0/+28
| | | | | | | | Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34238
* ar71xx: create profile and build image for the OpenMesh MR600 boardGabor Juhos2012-11-182-0/+12
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34237
* ar71xx: enable sysupgrade for the OpenMesh MR600Gabor Juhos2012-11-182-15/+42
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34235
* ar71xx: rename om2p.sh upgrade script to openmesh.shGabor Juhos2012-11-181-0/+0
| | | | | | | | | It will be used on other boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34234
* scripts/om-fwupgradecfg-gen.sh: add support for the MR600Gabor Juhos2012-11-181-2/+3
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34233
* ar71xx: add user-space support for the OpenMesh MR600 boardGabor Juhos2012-11-184-0/+13
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34232
* ar71xx: add kernel support for the OpenMesh MR600 boardGabor Juhos2012-11-185-0/+208
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34231
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 05:57:44 +0000