aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* imx6-gateworks: enable new canbus packagesLuka Perkov2014-04-191-2/+2
| | | | | | | | | The canbus package was recently changed to a more active project. This patch updates the default package names to include the same functionality as before. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40531
* lantiq: ARV7519RW22: several fixesJohn Crispin2014-04-164-127/+99
| | | | | | | | | | - Fix ethernet ports. - Clean DTS files. - WiFi is lantiq based (not supported yet), remove ath9k. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40519
* sunxi: remove mainlined patchesZoltan Herpai2014-04-142-78/+0
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40512
* ar71xx: rb91x: fix ethernet packet loss issuesGabor Juhos2014-04-131-0/+19
| | | | | | | | | | | | | | The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40509
* ar71xx/mikrotik: enable the AT803x PHY driverGabor Juhos2014-04-131-0/+1
| | | | | | | | It will be used on the RB91x boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40508
* ar71xx: allow to configure AR803x PHYs via platform dataGabor Juhos2014-04-131-0/+134
| | | | | | | | | Add a patch for the at803x phy driver, in order to be able to configure some register settings via platform data. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40507
* ar71xx: add phy_mmd_{read,write} helpersGabor Juhos2014-04-131-0/+40
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40506
* ar71xx: enable console on the RB91x boardsGabor Juhos2014-04-131-2/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40505
* ralink: add port_init for rt2880John Crispin2014-04-131-1/+2
| | | | | | | | | Forgotten patch to fix ethernet for rt2880. Based on previously submitted patch from Claudio. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40504
* ar71xx: add profile and build image for the ZyXEL NBG6716 boardGabor Juhos2014-04-133-0/+88
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: remove the non-existing zyxelnand subtarget specific stuff] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40502
* ar71xx: add user-space support for the ZyXEL NBG6716 boardGabor Juhos2014-04-134-0/+21
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40500
* ar71xx: add kernel support for ZyXEL NBG 6716Gabor Juhos2014-04-134-2/+325
| | | | | | | | | | | | | | | | | | | | | | With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40499
* lantiq: enable switch on td8970John Crispin2014-04-121-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40498
* Fix ARV7519RW imagesJohn Crispin2014-04-121-6/+6
| | | | | | | | This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40495
* Fix Asus rt-n15 board supportJohn Crispin2014-04-121-8/+18
| | | | | | | | | * gpio leds and buttons * ethernet Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40494
* rt2880 DT fixesJohn Crispin2014-04-121-2/+36
| | | | | | | | | | * add pinctrl * fix ethernet port * make wifi available by default Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40493
* Fix pinmux-rt2880John Crispin2014-04-121-6/+6
| | | | | | | | The last arg to FUNC() is count, not last pin. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40492
* Add wmac clock for rt2880John Crispin2014-04-121-0/+21
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40491
* Don't try to generate whr-g300n image if it's going to be more than 4MJohn Crispin2014-04-121-7/+9
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40489
* ar71xx: build firmware image for the WNDR3700 v4 boardGabor Juhos2014-04-122-4/+8
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40481
* ar71xx/image: allow to use more arguments for some macrosGabor Juhos2014-04-121-7/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40480
* ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesGabor Juhos2014-04-122-4/+4
| | | | | | | | | Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40479
* ar71xx: wndr4300: enable 5V power for the USB portGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | | | | The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40478
* ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonGabor Juhos2014-04-121-1/+1
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40477
* ar71xx: add default LED config for WiFi LEDs on the WNDR4300Gabor Juhos2014-04-121-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40476
* ar71xx: wndr4300: add LED for 2.4Ghz wifi interfaceGabor Juhos2014-04-121-0/+6
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40475
* ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOsGabor Juhos2014-04-121-0/+6
| | | | | | | | | The bootloader does not initializes the output function correctly for all LEDs. DO that from the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40474
* ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesGabor Juhos2014-04-122-9/+14
| | | | | | | | | | | | The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40473
* ar71xx: fix typos in TP-Link rssileds definitionGabor Juhos2014-04-121-2/+2
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40472
* ar71xx: add rssileds for Ubiquiti XM boardsGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40471
* x86/net5501: remove broken flagGabor Juhos2014-04-121-1/+0
| | | | | | | | | | According to Christophe, the kernel boots on the Soekris net5501 board. Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40468
* kernel: update 3.10 to 3.10.36Gabor Juhos2014-04-1233-62/+52
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467
* ar71xx: fix image generationGabor Juhos2014-04-121-5/+5
| | | | | | | | | Move the comments out from the shell script to fix build breakage introduced in r40464. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40466
* ar71xx: avoid spurious restarts caused by the watchdog on AR934xGabor Juhos2014-04-122-1/+49
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40465
* ar71xx: add comments for image Makefile.Gabor Juhos2014-04-121-0/+50
| | | | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5075/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40464
* ar71xx: initial support for TP-Link Archer C7v2Gabor Juhos2014-04-122-2/+4
| | | | | | | | | | | | | | | | | | The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40463
* brcm2708: add missing configuration symbolsFlorian Fainelli2014-04-111-0/+3
| | | | | | | | Spotted by buildbot and while doing a CONFIG_ALL=y build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 40462
* lantiq: add an extra partition to the TDW8970 flash that can be used to ↵John Crispin2014-04-111-1/+6
| | | | | | | | store the vdsl firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40461
* lantiq: more vdsl related cleanupsJohn Crispin2014-04-112-10/+23
| | | | | | | | | | | * atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40460
* x86_64: add usb support (including storage) to the kernel configFelix Fietkau2014-04-111-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40455
* x86: set default kernel version to 3.10Felix Fietkau2014-04-1111-12/+2
| | | | | | | | | Place the previous selection (3.3.8) into the only subtarget that did not override it to 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40454
* x86: remove linux 3.8 supportFelix Fietkau2014-04-1110-1465/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40453
* generate esxi compatible vmdks, tooImre Kaloz2014-04-111-0/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40452
* reuqire qemu-img to be installed (the one we have in tools is too old)Imre Kaloz2014-04-111-0/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40451
* generic: remove obsolete symbol export from block2mtd init patchFelix Fietkau2014-04-104-40/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40445
* x86: try harder to attach block2mtd to fix boot issues on devices with ↵Felix Fietkau2014-04-1011-63/+422
| | | | | | | | longer delays Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40444
* specify the adapter type for the vmdk conversionImre Kaloz2014-04-101-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40442
* lantiq: move the dsl-modem config to network.@dsl-modem[-1]John Crispin2014-04-101-0/+32
| | | | | | | | make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40439
* lantiq: make dsl_notify.sh executableJohn Crispin2014-04-091-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40436
* enable native KVM and VMware driversImre Kaloz2014-04-091-15/+48
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40434
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 20:16:11 +0000