aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* generic: mt7530: enable PHY configuration using OFDavid Bauer2023-05-111-0/+43
| | | | | | | | | | The MT753x switches provide a switch-internal MDIO bus for the embedded PHYs. Register a OF sub-node on the switch OF-node for this internal MDIO bus. This allows to configure the embedded PHYs using device-tree. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: enable CONFIG_ARM_CRYPTO for 32bit arm targetsLu jicong2023-05-1017-0/+17
| | | | | | | Fix following error when building 32bit arm targets with kmod-crypto-sha512 ERROR: module '/home/user/openwrt/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-5.15.109/arch/arm/crypto/sha512-arm.ko' is missing. Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* generic: refresh 5.15 kernel configLu jicong2023-05-1013-25/+9
| | | | | | prepare for enabling CONFIG_ARM_CRYPTO on these targets Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* ramips: add support for Linksys RE7000Christoph Krapp2023-05-093-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: - SoC: MediaTek MT7621AT (880 MHz) - Flash: 16 MB (Macronix MX25L12835FM2I-10G) - RAM: 128 MB (Nanya NT5CC64M16GP-DI) - WLAN 2.4 GHz: 2x2 MediaTek MT7603EN - WLAN 5 GHz: 2x2 MediaTek MT7615N - Ethernet: 1x 10/100/1000 Mbps - LED: Power, Wifi, WPS - Button: Reset, WPS - UART: 1:VCC, 2:GND, 3:TX, 4:RX (from LAN port) Serial console @ 57600,8n1 Flash instructions: Connect to serial console and start up the device. As the bootloader got locked you need to type in a password to unlock U-Boot access. When you see the following output on the console: relocate_code Pointer at: 87f1c000 type in the super secure password: 1234567890 Then select TFTP boot from RAM by selecting option 1 in the boot menu. As Linksys decided to leave out a basic TFTP configuration you need to set server- & client ip as well as the image filename the device will search for. You need to use the initramfs openwrt image for the TFTP boot process. Once openwrt has booted up, upload the sysupgrade image via scp and run sysupgrade as normal. Signed-off-by: Christoph Krapp <achterin@gmail.com>
* rockchip: disable UHS speed for ROC-RK3328-CCTianling Shen2023-05-091-0/+10
| | | | | | | | | | | The previously stated speed of sdr-104 in is too high for the hardware to reliably communicate with some fast SD cards. Rockchip boards have a common bug when operating uhs speed, which will hang the system during a soft reboot. To be on the safe side, lower the speed to workaround. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: enable rk805 pinctrl driverTianling Shen2023-05-091-1/+2
| | | | | | | This is required for ROC-RK3328-CC to light up the LED-s which are connected to rk805's gpio. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add Firefly ROC-RK3328-CC supportTianling Shen2023-05-093-8/+30
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* sdk: do not exclude all doc directoriesMichael Pratt2023-05-091-1/+2
| | | | | | | | | | | | | Some packages which are using local gnulib source are expecting files to exist in the directory: staging_dir/host/share/gnulib/doc so delete the other doc directories directly instead of excluding all of them. Fixes: d167adbc4 ("gettext-full: bootstrap to local gnulib source") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: add empty squashfs-lzma filesystemPaul Spooren2023-05-082-0/+3
| | | | | | | | | | | | | | | | | The filesystem is currently created on every build to trick the boot loader of some FRITZ! devices into accepting the image. Sadly the resulting squashfs-lzma filesystem is not reproducible. To fix this, create a squashfs filesystem once and include it into the repository. Creation happend as shown below rm -rf empty_dir mkdir empty_dir ./staging_dir/host/bin/mksquashfs-lzma \ empty_dir/ empty-squashfs-lzma \ -noappend -root-owned -be -nopad -b 65536 -fixed-time 0 Signed-off-by: Paul Spooren <mail@aparcar.org>
* ramips: fix dts file name for SNR-CPE-ME1Maximilian Weinmann2023-05-081-0/+0
| | | | | | | | | Rename file mt7621_snr_snr-spe-me-1.dts Fixes: #12562 Fixes: ecdb248 ("ramips: add support for SNR-CPE-ME1") Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Maximilian Weinmann <x1@disroot.org>
* realtek: remove redundant is_lagmember checksJan Hoffmann2023-05-072-26/+4
| | | | | | | | | | | | | All callers of the rtl83xx_mc_group_* functions already do the same check, so these aren't needed. For rtl83xx_mc_group_alloc, this branch also incorrectly returned 0 instead of a negative value. If the branch wasn't effectively dead code anyway, this could potentially have caused bugs, as 0 is a valid multicast group entry index. Fixes: cde31976e375 ("realtek: Add support for Layer 2 Multicast") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: remove store_mcgroups/load_mcgroupsJan Hoffmann2023-05-074-58/+0
| | | | | | | | | | | | | | | | | | | The current implementation only works when store and load are called for the same port without any other calls in between. This is because the store function only saves a single port number instead of a portmask for each group. It also doesn't take into account that the allocation of multicast group entries might change between store/load calls. As a result, the multicast port mask table gets corrupted. This also includes the reserved entry for unknown multicast, which gets corrupted even when no other mdb entries have been added. Remove the code for storing/loading multicast groups entirely, as the original commit message doesn't offer a convincing reason why this would be necessary in the first place. Fixes: 724e4af530cd ("realtek: Store and Restore MC memberships for port enable/disable") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: don't add CPU port to multicast portmasksJan Hoffmann2023-05-072-10/+4
| | | | | | | | | | | | | There shouldn't be any reason to forward all multicast to the CPU. The original commit message also doesn't provide a reason for this seemingly unrelated change. The current implementation of the delete method is also broken, as it entirely removes any entry when the portmask contains only the CPU port, even if it was explicitly created. Fixes: 724e4af530cd ("realtek: Store and Restore MC memberships for port enable/disable") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: actually remove port from multicast portmaskJan Hoffmann2023-05-072-0/+2
| | | | | Fixes: 724e4af530cd ("realtek: Store and Restore MC memberships for port enable/disable") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: don't treat first multicast portmask entry as reservedJan Hoffmann2023-05-072-2/+0
| | | | | | | | | | | | | | There doesn't appear to be a reason to do this, as only the last entry is actually reserved for unknown multicast. This also fixes two issues: - As the increment happened after the bounds check, the value of the actually reserved last entry could be overwritten. - On deletion of entries, a corresponding decrement was missing, causing the wrong entry to be marked as free. Fixes: cde31976e375 ("realtek: Add support for Layer 2 Multicast") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: fix writing/deletion of CAM entriesJan Hoffmann2023-05-072-8/+8
| | | | | | | Actually use the index returned by rtl83xx_find_l2_cam_entry. Fixes: cde31976e375 ("realtek: Add support for Layer 2 Multicast") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: handle changed flags in VLAN configurationJan Hoffmann2023-05-072-37/+43
| | | | | | | | | | | The port_vlan_add method may be called while a port is already a member of that VLAN, so it needs to be able to handle changed flags. Fix it to properly handle when the PVID or UNTAGGED flag was previously set, but now no longer is. To reduce duplication, move PVID configuration to a separate function. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: fix standalone ports in presence of static fdb entriesJan Hoffmann2023-05-078-0/+100
| | | | | | | | | | | | | | | | | | | | The registers L2_PORT_STATIC_MV_ACT seem to specify the action to take when the source address of a packet exists as a static fdb entry on another port. By default the configured action is to drop such packets. For standalone ports, this behaviour is undesired, as all traffic should be forwarded to the CPU. So change the action to forward on standalone ports. A situation where this issue can occur is when a non-offloaded bond interface is part of a bridge. In that case, the CPU port will have fdb entries for devices connected to the bond interface, which are managed by the assisted learning feature. For now, this is only implemented for RTL838x/RTL839x, as the available set of registers differs for the other devices. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: initialize port masks to match the default stateJan Hoffmann2023-05-072-24/+22
| | | | | | | | | | | | | All ports are disabled by default, so configure the port isolation masks and the pm field accordingly in the setup function. When port_enable is called for a port, the isolation masks will be set up so that traffic can flow between the port and the CPU. While at it, change the code to also use the traffic_set method in rtl83xx_setup, instead of writing to the RTL838x_PORT_ISO_CTRL(i) registers directly. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: properly update port masks when port leaves bridgeJan Hoffmann2023-05-072-10/+10
| | | | | | | | | | | | | | | | | Correctly update the isolation mask of the port being configured. The port_bitmap variable should contain all other bridge members and needs to be actually removed from the isolation mask instead of added to it. Also actually remove the port being configured from the pm field of the other ports, so that any other ports that are currently disabled will be configured correctly when they are enabled. Fixes: df8e6be59a1f ("rtl838x: add new architecture") [fixed updating pm field of other ports] Fixes: 2b88563ee5aa ("realtek: update the tree to the latest refactored version") [reintroduced incorrect pm field update] Fixes: 27029277f98d ("realtek: add switch driver support for the RTL93XX based switches") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* layerscape: Add support for Felix DSA switchWojciech Dubowik2023-05-071-0/+5
| | | | | | It's present on LS1028ARDB reference board from NXP. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* layerscape: Add ls1028ardb supportWojciech Dubowik2023-05-075-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NXP LS1028ARDB reference board. It's a dual core Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are connected to MSCC Felix switch). The original layout of NXP board has been kept but firmware images are adapted to be more sysupgrade friendly. At the moment NOR and SD boots are supported. NOR flash instructions: * make sd card with sdboot image * boot * write firmware image to spi flash $ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb- squashfs-firmware.bin /dev/mtd0 * change jumper to NOR boot and reset V3: * Added board specific network defaults for lan/wan v2: * Added INA220 curent monitor, PCF2129 RTC clock and NXP SA56004ED temperature sensor to default packages * removed compat fixups for thist board Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* ramips: add support for SNR-CPE-ME1Maximilian Weinmann2023-05-073-0/+227
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 16 MiB (GD25Q128CSIG) - WLAN : 2.4 GHz (MediaTek MT7603EN) 5 GHz (MediaTek MT7610EN) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (in SoC) - USB : 3.0 x1 - UART : through-hole on PCB - [J4] 3.3V, RX, TX, GND (57600n8) - Power : 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME1 to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface Signed-off-by: Maximilian Weinmann <x1@disroot.org>
* ath79: add support for ZTE MF282Andreas Böhler2023-05-063-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZTE MF282 is a LTE router used (exclusively?) by the network operator "3". Specifications ============== SoC: QCA9563 (775MHz) RAM: 128MiB Flash: 8MiB SPI-NOR + 128MiB SPI-NAND LAN: 1x GBit LAN LTE: ZTE MF270 (Cat4), detected as P685M WiFi: QCA9880ac + QCA9560bgn MAC addresses ============= LAN: from config WiFi 1: from config WiFi 2: +1 Installation ============ TFTP installation using UART is preferred. Disassemble the device and connect serial. Put the initramfs image as openwrt.bin to your TFTP server and configure a static IP of 192.168.1.100. Load the initramfs image by typing: setenv serverip 192.168.1.100 setenv ipaddr 192.168.1.1 tftpboot 0x82000000 openwrt.bin bootm 0x82000000 From this intiramfs boot you can take a backup of the currently installed partitions as no vendor firmware is available for download. Once booted, transfer the sysupgrade image and run sysupgrade. LTE Modem ========= The LTE modem is probably the same as in the MF283+, all instructions apply. Configuring the connection using modemmanager works properly, the modem provides three serial ports and a QMI CDC ethernet interface. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ath79: refactor ZTE MF28x dts filesAndreas Böhler2023-05-063-329/+233
| | | | | | | Move common dts entries of ZTE MF281 and ZTE MF286 to a common .dtsi file to reduce redundancies. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ramips: mt7621: rename Asus RT-AC57U to v1Felix Baumann2023-05-062-4/+6
| | | | | | rename RT-AC57U to avoid confusion with unsupported revisions 2 and 3 Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* realtek: adapt patch description to it's current useNick Hainke2023-05-061-3/+2
| | | | | | The patch is not doing anymore what the descriptions says. Update it. Signed-off-by: Nick Hainke <vincent@systemli.org>
* generic: 5.15: remove outdated symbolsNick Hainke2023-05-051-8/+0
| | | | | | | | | | | | | Remove symbols that are no longer present in 5.15: - CONFIG_CRYPTO_RMD128 - CONFIG_CRYPTO_RMD256 - CONFIG_CRYPTO_RMD320 - CONFIG_CRYPTO_SALSA20 - CONFIG_CRYPTO_TGR192 - CONFIG_RAW_DRIVER - CONFIG_ENABLE_MUST_CHECK Signed-off-by: Nick Hainke <vincent@systemli.org>
* generic: 5.15: add patch fixing compiling mvebu with gcc-13Nick Hainke2023-05-051-0/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes errors in the form of: drivers/ata/libahci.c: In function 'ahci_led_store': ././include/linux/compiler_types.h:334:45: error: call to '__compiletime_assert_363' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long) 334 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ ././include/linux/compiler_types.h:315:25: note: in definition of macro '__compiletime_assert' 315 | prefix ## suffix(); \ | ^~~~~~ ././include/linux/compiler_types.h:334:9: note: in expansion of macro '_compiletime_assert' 334 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^~~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert' 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) | ^~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG' 50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) | ^~~~~~~~~~~~~~~~ ./include/linux/nospec.h:62:9: note: in expansion of macro 'BUILD_BUG_ON' 62 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \ | ^~~~~~~~~~~~ drivers/ata/libahci.c:1143:23: note: in expansion of macro 'array_index_nospec' 1143 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS); | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq: switch to Kernel 5.15 by defaultPaul Spooren2023-05-041-2/+1
| | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org>
* lantiq: xway: use capital letters in Fritz!Box nameNick Hainke2023-05-041-1/+1
| | | | | | | Rename to Fritz!Box to keep naming uniform. Fixes: ceac4ae3b403 ("lantiq: xway: add support for AVM FRITZ!Box 7330") Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq: xrx200: mark subtarget as source-onlyAleksander Jan Bajkowski2023-05-041-1/+1
| | | | | | | | | The current problems blocking the switch to the kernel 5.15 are related to the GSWIP driver. This driver is only used by the xrx200 subtarget. The other subtargets are unaffected by this problem. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* Revert "lantiq: mark source only"Aleksander Jan Bajkowski2023-05-041-1/+1
| | | | | | | | This reverts commit c306385474f4f183657423be708ac7813ee38b47. It should be sufficient to disable only the xrx200 subtarget. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: improve handling of CONFIG_IO_URINGTony Ambardar2023-05-0314-14/+0
| | | | | | | | | | | | | | | | | | | | | | Kernel setting CONFIG_IO_URING supports high-performance I/O for file access and servers, generally for more performant platforms, and adds ~45 KB to kernel sizes. The need for this on less "beefy" devices is questionable, as is the size cost considering many platforms have kernel size limits which require tricky repartitioning if outgrown. The size cost is also large relative to the ~180 KB bump expected between major OpenWRT kernel releases. No OpenWrt packages have hard dependencies on this; samba4 and mariadb can take advantage if available (+KERNEL_IO_URING:liburing) but otherwise build and work fine. Since CONFIG_IO_URING is already managed via the KERNEL_IO_URING setting in Config-kernel.in (default Y), remove it from those target configs which unconditionally enable it, and update the defaults to enable it conditionally only on more powerful 64-bit x86 and arm devices. It may still be manually enabled as needed for high-performance custom builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: fix handling of CONFIG_DYNAMIC_DEBUGTony Ambardar2023-05-039-9/+2
| | | | | | | | | | Since CONFIG_DYNAMIC_DEBUG is already managed via the KERNEL_DYNAMIC_DEBUG setting in Config-kernel.in (default N), remove or disable it in target configs which unconditionally enable it, along with the related setting CONFIG_DYNAMIC_DEBUG_CORE. This saves several KB in the kernels for ipq40xx, ipq806x, filogic, mt7622, qoriq, and sunxi. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: bump 5.15 to 5.15.110John Audia2023-05-032-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq40xx: convert AVM FRITZ!Repeater 3000 to DSANick Hainke2023-05-033-2/+22
| | | | | | Convert the repeater to DSA. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: Activate CONFIG_SLAB_FREELIST_RANDOMHauke Mehrtens2023-05-032-2/+2
| | | | | | | | | | | | | This activates CONFIG_SLAB_FREELIST_RANDOM. This option make the free list less predictable. This makes it harder to exploit heap based security vulnerabilities. This adds a little bit more code to the kernel and a small additional compute overhead. This option is activated in Debian by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omap: mark source onlyPaul Spooren2023-05-031-1/+1
| | | | | | | | The target is currently broken with Kernel 5.15 and no one in sight to fix it. Instead of stalling the next release indefinitely, make it source only and see if someone steps up to fix it. Signed-off-by: Paul Spooren <paul.spooren@rhebo.com>
* lantiq: mark source onlyPaul Spooren2023-05-031-1/+1
| | | | | | | | The target is currently broken with Kernel 5.15 and no one in sight to fix it. Instead of stalling the next release indefinitely, make it source only and see if someone steps up to fix it. Signed-off-by: Paul Spooren <paul.spooren@rhebo.com>
* ramips: mt7621: add support for Cudy X6 v2Felix Baumann2023-05-025-52/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename existing device to v1 and create common .dtsi Difference to v1: 16MB Flash Specifications: SoC: MediaTek MT7621 RAM: 256 MB Flash: 16 MB (SPI NOR, XM25QH128C on my device) WiFi: MediaTek MT7915E Switch: 1 WAN, 4 LAN (Gigabit) Buttons: Reset, WPS LEDs: Two Power LEDs (blue and red; together they form purple) Power: DC 12V 1A center positive Serial: 115200 8N1 C440 - (3V3 - GND - RX - TX) - C41 | v1 and v2 (P - G - R - T) | v2 labels them on the board Installation: Download and flash the manufacturer's built OpenWrt image available at http://www.cudytech.com/openwrt_software_download Install the new OpenWrt image via luci (System -> Backup/Flash firmware) Be sure to NOT keep settings. Recovery: Loads only signed manufacture firmware due to bootloader RSA verification Serve tftp-recovery image as /recovery.bin on 192.168.1.88/24 Connect to any lan ethernet port Power on the device while holding the reset button Wait at least 8 seconds before releasing reset button for image to download MAC addresses as verified by OEM firmware: use address source LAN f4:a4:54:86:75:a2 label WAN f4:a4:54:86:75:a3 label + 1 2g f4:a4:54:86:75:a2 label 5g f6:a4:54:b6:75:a2 label + LA-Bit set + 4th oktet increased The label MAC address is found in bdinfo 0xde00. Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* realtek: hpe_1920-8g: add phy-handle for SFP portsJan Hoffmann2023-04-302-0/+4
| | | | | | | | The switch driver actually expects every port to have a PHY handle, and several branches in the code determine if a port is valid by checking for a non-zero phy field. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* mediatek: no longer hard-code WAN PHY of Netgear WAX206Daniel Golle2023-04-301-2/+2
| | | | | | | | The RealTek 2.5G PHY providing the WAN port of the Netgear WAX206 has previously been hard-coded in the device tree. Now that the PHY can be probed correctly also via Clause-45 MDIO, use that instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: net: phy: realtek: detect early version of RTL8221BDaniel Golle2023-04-301-0/+63
| | | | | | | | | | Early versions (?) of the RTL8221B PHY cannot be identified in a regular Clause-45 bus scan as the PHY doesn't report the implemented MMDs correctly but returns 0 instead. Implement custom identify function using the PKGID instead of iterating over the implemented MMDs to work-around this problem. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.109John Audia2023-04-3010-59/+10
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/743-v6.3-0005-net-dsa-b53-mmap-add-phy-ops.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.109&id=357fa038d93d0e9159a0f0d45bae0f8654e2ade5 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.179John Audia2023-04-308-14/+14
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* ramips: add factory image for TP-Link EC330-G5u v1Mikhail Zhilkin2023-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds factory.bin image for TP-Link EC330-G5u v1. This allows to install OpenWrt without connecting a serial cable (UART). Installation using factory image -------------------------------- Tested with "3.16.0 0.9.1 v6037.0 Build 191016 Rel.30619nb" TP-Link firmware. 1. Login to the router web interface (http://192.168.0.1/ by default) and save running config to "conf.bin" file 2. Open configuration file in any TP-Link config editor (e.g. https://jahed.github.io/tp-link-config-editor/) 3. Find "DeviceInfo" section and insert a new string "<Description val="Modem Router`telnetd -p 1023 -l login`" />" according to the following example: <DeviceInfo> ... <Description val="Modem Router`telnetd -p 1023 -l login`" /> ... </DeviceInfo> 4. Save configuration file and upload changed configuration using stock firmware interface 5. Login using telnet to IP:192.168.0.1 (Username:admin, password:1234) 6. Run "cat /proc/mtd | grep mtd7" a. If the result is 'mtd7: 03000000 00020000 "rootfs" 03400000', then install stock firmware using web interface to toggle booted firmware image from "os1" to "os0" b. If the result is 'mtd7: 03000000 00020000 "rootfs" 00400000', then all is ok, go to the next step 7. Set up a tftp server with OpenWrt factory.bin image (IP:192.168.0.100 in this example) 8. Login using telnet to 192.168.0.1 9. Download OpenWrt factory.bin image from the tftp server: cd /tmp tftp -g -r factory.bin 192.168.0.100 10. Write OpenWrt factory.bin image: dd if=/tmp/factory.bin of=/dev/mtdblock1 11. Power cycle the router Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: TP-Link EC330-G5u v1: switch to mac-address-asciiMikhail Zhilkin2023-04-293-10/+26
| | | | | | | | | | | | | The TP-Link EC330-G5u v1 router has MAC address that stored in factory mtd in ascii format. This commit makes the router use of "mac-address-ascii" in dts. After the change: 1. All MAC addresses are explicitly assigned in dts (the workarounds in network scripts are no longer needed); 2. gmac0 (eth0) MAC address is no longer random. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: lzma-loader: Refactor loaderAntonio Vázquez2023-04-299-87/+75
| | | | | | | | | * Delete unused lantiq makefile * Delete redundant makefiles and unify them into the main makefile * Refactor and unify board code into a single file * Add support and review subtarget specific board support Signed-off-by: Antonio Vázquez <antoniovazquezblanco@gmail.com>
* ramips: add support for D-Link DAP-1620 B1Rani Hod2023-04-295-8/+191
| | | | | | | | | | | | | | | | | | | | | | | | | The DAP-1620 rev B is a wall-plug AC1300 repeater. Specifications: - MT7621AT, 256 MiB RAM, 16 MiB SPI NOR - MT7615DN 2x2 802.11n +2x2 802.11ac (DBDC) - Ethernet: 1 port 10/100/1000 - Status LEDs (1x red+green) - LED RSSI bargraph (2x green, 1x red+green) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tail -c+117 DAP1620B1_FW212B03.bin | \ openssl aes-256-cbc -d -md md5 -out decrypted.bin \ -k 905503a4e0c3cd3c1ce062246de427a68962347e - flash decrypted.bin via D-Link Web Recovery Signed-off-by: Rani Hod <rani.hod@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-19 07:53:12 +0000