aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.82John Audia2021-11-2719-94/+38
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-278-12/+12
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* llvm-bpf: fix rebuild check for generating tarballFelix Fietkau2021-11-261-1/+1
| | | | | | Check the version file, as it will be regenerated on rebuild Signed-off-by: Felix Fietkau <nbd@nbd.name>
* llvm-bpf: use SOURCE_DATE_EPOCH for generated tarballFelix Fietkau2021-11-261-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: Remove _machine_restart and _machine_haltSander Vanheule2021-11-241-85/+0
| | | | | | | | | | | | | | By dropping _machine_restart, users can provide more reliable or device-specific restart modes. _machine_halt was already removed in commit f4b687d1f053 ("realtek: use kernel defined halt"), but quietly reintroduced in commit 8faffa00cb6b ("realtek: add support for the RTL9300 timer"). Let's remove it again. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Add and enable watchdog nodeSander Vanheule2021-11-243-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add and enable the Realtek Otto WDT peripheral found on these SoCs. Default all devices to use standard (cold) reboot and "soc" resets. Devices that require the PLL value fixup before restarting, should pick the "cpu" or "software" reset mode. These devices also need to provide a custom reboot mode, by adding the reboot argument to the kernel command line: WDT reset mode | kernel reboot mode ----------------+--------------------------------------- soc | reboot=cold (default if not specified) cpu | reboot=warm software | reboot=software Preferrably, these devices should use an alternative restart method like gpio-restart to provide reliable restarts. Note that watchdog restarts are not yet exposed, since the _machine_restart override is still present. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Backport Realtek Otto WDT driverSander Vanheule2021-11-243-0/+486
| | | | | | | | | | | Add patch submitted upstream to linux-watchdog and replace the MIPS architecture symbols. Requires one extra patch for the DIV_ROUND_* macros, which have moved to a different header since 5.10. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Add Lexra bus clockSander Vanheule2021-11-242-8/+13
| | | | | | | | | | | | | | | | | The CPU peripherals on RTL83xx/RTL930x are connected to the CPU via the Lexra bus. This bus can provide a clock signal to these peripherals, but no clock driver is currently available. Instead, use a fixed-clock to provide the clock frequency, and update the dependent peripherals. Lexra bus clock frequencies: - RTL838x: 200MHz - RTL839x: 200MHz - RTL930x: 175MHz Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Consolidate bootargsSander Vanheule2021-11-248-26/+2
| | | | | | | | | | All current devices use identical bootargs, so let's move that to the common devicetree includes. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: reset both ethernet NIC and queuesSander Vanheule2021-11-241-4/+7
| | | | | | | | | | | | | | | Recent versions of Realtek's SDK reset both the ethernet NIC and queues (SW_NIC_RST and SW_Q_RST bits) when initialising the hardware. Furthermore, when issuing a CPU reset on the Zyxel GS1900-8 (not supported by any current driver), the networking part of the SoC is not reset. This leads to unresponsive network after the restart. By resetting both the ethernet NIC and queues, networking always comes up reliably. Suggested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm53xx: fix platform clocks & USB 2.0 PHYRafał Miłecki2021-11-231-0/+62
| | | | | | | | This fixes WARNing, missing clocks and [ 10.422481] bcm_ns_usb2 1800c164.usb2-phy: Clock not defined Fixes: 5901917b936d ("bcm53xx: use more upsteam DT patches from 5.16 / 5.17") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: use new USB 2.0 PHY bindingRafał Miłecki2021-11-232-0/+183
| | | | | | | | | | | This fixes: [ 10.440495] bcm_ns_usb2 1800c000.usb2-phy: can't request region for resource [mem 0x1800c000-0x1800cfff] [ 10.450039] bcm_ns_usb2 1800c000.usb2-phy: Failed to map DMU regs [ 10.456183] bcm_ns_usb2: probe of 1800c000.usb2-phy failed with error -16 caused by conflict in allocating resources. Fixes: f55f1dbaad33 ("bcm53xx: switch to the kernel 5.10") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "ath79: add support for Mikrotik LHG 5"Hauke Mehrtens2021-11-236-177/+0
| | | | | | | | This reverts commit 48774decea9b42e97edd53ce33e574de7d85f3df. This commit does not contain a valid name in the Signed-off-by line. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: specify switch ports on TP-LINK devicesRafał Miłecki2021-11-221-0/+92
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/llvm-bpf: move tarball packing to target/llvm-bpfFelix Fietkau2021-11-222-2/+36
| | | | | | | This ensures that the tarball is regenerated after make clean or after switching to a different target Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: build kernel with sun6i-rtc driverDaniel Golle2021-11-212-0/+2
| | | | | | | | | | | | | | | | | sun6i-rtc cannot be built as a module and the hardware is only present in some of the sunxi SoCs, see driver source: { .compatible = "allwinner,sun6i-a31-rtc" }, { .compatible = "allwinner,sun8i-a23-rtc" }, { .compatible = "allwinner,sun8i-h3-rtc" }, { .compatible = "allwinner,sun8i-r40-rtc" }, { .compatible = "allwinner,sun8i-v3-rtc" }, { .compatible = "allwinner,sun50i-h5-rtc" }, { .compatible = "allwinner,sun50i-h6-rtc" }, Set CONFIG_RTC_DRV_SUN6I=y in kernel config file for cortexa7 and cortexa53 subtargets which covers all of the above. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "sunxi: add rtc-sun6i driver package"Daniel Golle2021-11-211-18/+0
| | | | | | | sun6i-rtc is a builtin_platform_driver and cannot be built as a module. Hence this reverts commit e178d9a5494747a9b6ea34f2fc9e798b4b1ecc16. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix ralink_i2s_debugfs_remove declarationEneas U de Queiroz2021-11-202-2/+2
| | | | | | | Correct ralink_i2s_debugfs_remove declaration in ralink patches when CONFIG_DEBUG_FS is not selected. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ramips: use lzma-loader on D-Link DIR-615 H1Mirko Parthey2021-11-201-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* ramips: add support for Wavlink WL-WN576A2Thomas Aldrian2021-11-204-2/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Wavlink WL-WN576A2 wall-plug wireles repeater / router. It is also sold under the name SilverCrest SWV 733 B1. Device specs: - CPU: MediaTek MT7628AN - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 1x 10/100 Mbps - 2.4 GHz: b/g/n SoC - 5 GHz: a/n/ac MT7610EN - Buttons: WPS, reset, sliding switch (ap/repeater) - LEDs: 5x wifi status, 1x LAN/WAN, 1x WPS Flashing: U-Boot launches a TFTP client if WPS button is held during boot. - Server IP: 192.168.10.100 - Firmware file name: firmware.bin Device will reboot automatically. First boot takes about 90s. Coelner (waenger@gmail.com) is the original author, but I have made some fixes. He does not wish to sign off using his real name. Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
* ath79: merge D-Link DAP-2695 with dtsiSebastian Schaper2021-11-202-81/+25
| | | | | | | | | | | | Further devices from the series have been added in the meantime, introducing `qca955x_dlink_dap-2xxx.dtsi`. Thus, merge support for DAP-2695 with the existing dtsi. This implies factory images can now be flashed via the regular OEM Web UI, as well as the bootloader recovery. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: move cal-data extraction to dts for DAP-2695Sebastian Schaper2021-11-203-5/+2
| | | | | | | | | | This device can be merged with the existing dtsi, which declares the location of ath9k cal-data via devicetree, correcting the 2.4G mac address in `10_fix_wifi_mac` rather than `10-ath9k-eeprom`. To make these changes more visible, apply before merging with dtsi. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* ath79: increase SPI frequency for D-Link DAP-2695Sebastian Schaper2021-11-201-1/+1
| | | | | | | | | This device can be merged with the existing dtsi, which will increase spi-max-frequency to 50 MHz. To make this change more visible, increase to 50 MHz before merging. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
* omap: switch to kernel 5.10Andre Heider2021-11-201-1/+1
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: update kernel 5.10 configAndre Heider2021-11-201-88/+29
| | | | | | | | | | | | | | | | | | | Manually set toggles are: MMC_SDHCI_OMAP=y TI_PRUSS_INTC=y DRM_TI_TPD12S015=y (successor to DRM_OMAP_ENCODER_TPD12S015 [0] [1]) DRM_DISPLAY_CONNECTOR=y (for DRM_TI_TPD12S015 [1]) DRM_SIMPLE_BRIDGE=y (for DRM_TI_TPD12S015 [1]) Manually unset toggles are: SND_MIXER_OSS=y (disabled by generic config) The rest was automatically modified by the kernel_oldconfig make target. [0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cff5e6f7e83f6271ed75972e9a2920e2c7f62d6c [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e7e67d9a2f1dd2f938adcc219b3769f5cc3f0df7 Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: copy kernel 5.4 config for 5.10Andre Heider2021-11-201-0/+740
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath79: add support for Mikrotik LHG 5Jakob (Jack/XDjackieXD)2021-11-206-0/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik LHG 5 series (product codes RBLHG-5nD, RBLHG-5HPnD and RBLHG-5HPnD-XL) devices are an outdoor 5GHz CPE with a 24.5dBi or 27dBi integrated antenna built around the Atheros AR9344 SoC. It is very similar to the SXT Lite5 series which this patch is based upon. Specifications: - SoC: Atheros AR9344 - RAM: 64 MB - Storage: 16 MB SPI NOR - Wireless: Atheros AR9340 (SoC) 802.11a/n 2x2:2 - Ethernet: Atheros AR8229 switch (SoC), 1x 10/100 port, 8-32 Vdc PoE in - 8 user-controllable LEDs: - 1x power (blue) - 1x user (white) - 1x ethernet (green) - 5x rssi (green) See https://mikrotik.com/product/RBLHG-5nD for more details. Notes: The device was already supported in the ar71xx target. Flashing: TFTP boot initramfs image and then perform a sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Jakob (Jack/XDjackieXD) <jakob@chaosfield.at>
* sunxi: add rtc-sun6i driver packageZhao Yu2021-11-201-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AP6212 wifi need wifi_pwrseq, but from OrangePi Lite 2 dts : wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; }; this pwrseq need rtc clock, or kernel won't find this device. but now rtc-sunxi.c only support A10/A20. Orangepi Lite 2 use H6 ,from rtc-sun6i.c show compatible is { .compatible = "allwinner,sun6i-a31-rtc" }, { .compatible = "allwinner,sun8i-a23-rtc" }, { .compatible = "allwinner,sun8i-h3-rtc" }, { .compatible = "allwinner,sun8i-r40-rtc" }, { .compatible = "allwinner,sun8i-v3-rtc" }, { .compatible = "allwinner,sun50i-h5-rtc" }, { .compatible = "allwinner,sun50i-h6-rtc" }, So it need this to let kernel find this mmc wifi device. As suggested by hauke, let it build as package. Signed-off-by: Zhao Yu <574249312@qq.com>
* ath79: mikrotik: enable USB module on RouterBoard wAPR-2nDRoger Pueyo Centelles2021-11-202-1/+9
| | | | | | | | | | | The MikroTik RouterBOARD wAPR-2nD (wAP R) router features a miniPCI-e slot with USB lines connected, which are used by some USB cards with miniPCI-e form factor, like the R11e-LR8. Enabling USB support is required for such cards to work. Tested on a MikroTik wAP LR8 kit (RB wAPR-2nD + R11e-LR8). Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* octeon: add USB3 support (for Ubiquiti EdgeRouter 6P)Laurent DEBOMY2021-11-202-0/+4
| | | | | | Fixes: FS#4086 Signed-off-by: Laurent DEBOMY <laurent.debomy@canal-belletrud.fr>
* mvebu: backport mvneta basic MQPrio patchKabuli Chana2021-11-201-0/+109
| | | | | | | Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel: bump 5.4 to 5.4.159John Audia2021-11-203-6/+6
| | | | | | | | | Manually rebased: generic-backport/850-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch All other patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: remove non-existent config symbolsJianhui Zhao2021-11-202-2/+0
| | | | | | | The crashlog patch as not ported to kernel 5.4. Fixes: 4e0c54bc5bc8 ("kernel: add support for kernel 5.4") Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* mediatek/mt7622: unifi-6-lr: fix ucidef network configuration typoMark Mentovai2021-11-191-1/+1
| | | | | | | | There's no such thing as ucidef_set_interfaces_lan. It's ucidef_set_interface_lan. Cc: David Bauer <mail@david-bauer.net> Signed-off-by: Mark Mentovai <mark@moxienet.com>
* bcm4908: build chk image for Netgear RAXE500Rafał Miłecki2021-11-191-1/+1
| | | | | Fixes: 63ba3eaccdde ("bcm4908: start working on Netgear RAXE500 image") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: start working on Netgear RAXE500 imageRafał Miłecki2021-11-192-0/+36
| | | | | | | | bootfs still needs more work before it's ready. For some unknown reason model RAXE500 uses board id RAX220. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: enable MTD_CMDLINE_PARTSRafał Miłecki2021-11-192-0/+2
| | | | | | | It's needed to support devices with U-Boot. That bootloader passes MTD layout using cmdline. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: continue work on images for U-Boot based devicesRafał Miłecki2021-11-193-0/+96
| | | | | | It still isn't ready though - more data needs to be added to the bootfs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sunxi: 5.10: Orange Pi Zero Plus: Fix networkingRobert Marko2021-11-191-0/+32
| | | | | | | | | | | | | | | | Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its currently set to plain RGMII mode meaning that it doesn't introduce delays. With this setup, TX packets are completely lost and changing the mode to RGMII-ID so the PHY will add delays internally fixes the issue. It looks like this got broken in 5.10 as the PHY RGMII config got fixed due to datasheet being available and a lot of boards got broken by that. This has already been sent upstream and received multiple reviews. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-1943-483/+62
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm4908: backport upstream DT commitsRafał Miłecki2021-11-1814-16/+468
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: use more upsteam DT patches from 5.16 / 5.17Rafał Miłecki2021-11-184-9/+116
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: improve ethernet performanceAleksander Jan Bajkowski2021-11-1514-0/+706
| | | | | | | | This commit contains a series of fixes for DMA. The burst length patch significantly improves Ethernet performance. Patches were tested on the xRX200 and xRX330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: fix mac-address-increment patchAnsuel Smith2021-11-154-28/+48
| | | | | | | | | Fix mac address increment patch. Permit to overflow to the next byte and correctly calculate the incremented mac. Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: 5.10: backport explicit MAC06 disable patchMatthew Hagan2021-11-151-0/+47
| | | | | | | | | Backport of Ansuel Smith's "net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled", to ensure mac06 is disabled even if enabled by the bootloader. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* mxs: drop kernel 5.4 supportZoltan HERPAI2021-11-142-355/+0
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mxs: switch to Kernel 5.10Paul Spooren2021-11-141-2/+2
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* lantiq: fix mac address from nvmem-cellsMathias Kresin2021-11-142-2/+0
| | | | | | | | | | The devicetree property mac-address is expected to be set by the bootloader and has priority over the nvmem supplied one. Drop the mac-address address property from the dtsi files, to let the mac address from nvmem-cells get used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: fix missing includeChristian Lamparter2021-11-141-0/+1
| | | | | | | | | | | | This patch fixes a blunder of mine. The include needed for LED_COLOR_ID_BLUE property is missing. This caused the builds to fail with: |Error: arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi:91.13-14 syntax error |FATAL ERROR: Unable to parse input tree Fixes: 12d33d388c52 ("ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: reenable Zyxel NBG6617 by defaultChristian Lamparter2021-11-141-1/+0
| | | | | | | | | The Zyxel NBG6617 already uses lzma to compress the kernel. A local build with every module enabled (either as =Y or =M) ended produced a 3058 KiB kernel (the kernel partition is 4MiB). It booted just fine, let's reenable the device. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-20 06:17:32 +0000