aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for BOLT! ArionAbdul Aziz Amar2022-04-193-0/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device is from now-defunct BOLT! ISP in Indonesia. The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision. Specifications: - SoC: MediaTek MT7621 - Flash: 32 MiB NOR SPI - RAM: 128 MiB DDR3 - Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN) - WIFI0: MT7603E 2.4GHz 802.11b/g/n - WIFI1: MT7612E 5GHz 802.11ac - Antennas: 2x internal, non-detachable - LEDs: Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1) Non-programmable "Power" LED - Buttons: Reset and WPS Instalation: Install from TFTP Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123 Press "1" when turning on the router, and type the initramfs file name You also need to solder pin header or cable to J4 or neighboring test points (T19-T21) Pinouts from top to bottom: GND, TX, RX, VCC (3.3v) Baudrate: 57600n8 There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB. Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com> (cherry picked from commit 78c3534645958c123aa82cec9926a34eed5dd5dd)
* ramips: add support for Wavlink WL-WN531A3Davide Fioravanti2022-04-193-1/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wavlink WL-WN531A3 is an AC1200 router with 5 fast ethernet ports and one USB 2.0 port. It's also known as Wavlink QUANTUM D4. Hardware -------- SoC: Mediatek MT7628AN RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CSIG3) ETH: - 5x 10/100 Mbps Ethernet (4x LAN + 1x WAN) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 external antennas BTN: - 1x Reset button - 1x WPS button - 1x Turbo button - 1x Touchlink button - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 7x Blue leds (wifi led + 5 ethernet ports + power) USB: - 1x USB 2.0 port UART: - 57600-8-N-1 J1 O VCC +3,3V (near lan ports) o RX o TX o GND Everything works correctly. Currently there is no firmware update available. Because of this, in order to restore the OEM firmware, you must firstly dump the OEM firmware from your router before you flash the OpenWrt image. Backup the OEM Firmware ----------------------- The following steps are to be intended for users having little to none experience in linux. Obviously there are many ways to backup the OEM firmware, but probably this is the easiest way for this router. Procedure tested on M31A3.V4300.200420 firmware version. 1) Go to http://192.168.10.1/webcmd.shtml 2) Type the following line in the "Command" input box and then press enter: mkdir /etc_ro/lighttpd/www/dev; cp /dev/mtd0ro /etc_ro/lighttpd/www/dev/mtd0ro; ls -la /etc_ro/lighttpd/www/dev/mtd0ro 3) After few seconds in the textarea should appear this output: -rw-r--r-- 1 0 0 8388608 /etc_ro/lighttpd/www/dev/mtd0ro If your output doesn't match mine, stop reading and ask for help in the forum. 4) Open in another tab http://192.168.10.1/dev/mtd0ro to download the content of the whole NOR. If the file size is 0 byte, stop reading and ask for help in the forum. 5) Come back to the http://192.168.10.1/webcmd.shtml webpage and type: rm /etc_ro/lighttpd/www/dev/mtd0ro; for i in 1 2 3 4 ; do cp /dev/mtd${i}ro /etc_ro/lighttpd/www/dev/mtd${i}ro; done; ls -la /etc_ro/lighttpd/www/dev/ 6) After few seconds, in the textarea should appear this output: -rw-r--r-- 1 0 0 196608 mtd1ro -rw-r--r-- 1 0 0 65536 mtd2ro -rw-r--r-- 1 0 0 65536 mtd3ro -rw-r--r-- 1 0 0 8060928 mtd4ro drwxr-xr-x 7 0 0 0 .. drwxr-xr-x 2 0 0 0 . If your output doesn't match mine, stop reading and ask for help in the forum. 7) Open the following links to download the partitions of the OEM FW: http://192.168.10.1/dev/mtd1ro http://192.168.10.1/dev/mtd2ro http://192.168.10.1/dev/mtd3ro http://192.168.10.1/dev/mtd4ro If one (or more) of these files are 0 byte, stop reading and ask for help in the forum. 8) Store these downloaded files in a safe place. 9) Reboot your router to remove any temporary file in ram. Installation ------------ Flash the initramfs image in the OEM firmware interface (http://192.168.10.1/update.shtml). When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Restore OEM Firmware -------------------- Flash the "mtd4ro" file you previously backed-up directly from LUCI. Warning: Remember to not keep settings! Warning2: Remember to force the flash. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:9B (factory @ 0x28) WAN XX:XX:XX:XX:XX:9C (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:9D (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:9E (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:9D 2) There is just one wifi led for both wifi interfaces. It currently shows only the 2.4 GHz wifi activity. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> (cherry picked from commit bb505d82add5636da891bb97fdabc57947280e88)
* Revert "kernel: backport MT7530 VLAN fix"Stijn Tintel2022-04-195-523/+0
| | | | | | | | | | | There are various reports on Github and in the forum that this commit causes multiple problems. This reverts commit ee6ba216d8ba1b02154c287e64d709a8bc7b0054. Fixes: #9420 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 3e0daca6447c3d5b9eb6d24ecb8e52f256f385cc)
* ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)David Musil2022-04-185-1/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. Specifications: - SoC: Qualcomm Atheros QCA9533 - Flash: 16 MB (SPI) - RAM: 64 MB - Ethernet: 1x 10/100 Mbps (PoE in) - WiFi: AR9531 2T2R 2.4 GHz (SoC) - 3x green LEDs (1x lan, 1x wlan, 1x user) See https://mikrotik.com/product/RBwAP2nD for more info. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: David Musil <0x444d@protonmail.com> (cherry picked from commit e20de224427008e0f26161f924bc347d974fd15a)
* mpc85xx: move Extreme WS-AP3825i GPIO extenderDavid Bauer2022-04-181-23/+25
| | | | | | | | Move the GPIO extender to the SoC node. Otherwise, the legacy PowerPC init code will not populate the BUS and thus never probe spi-gpio. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0c09d0305835abc7bcc32285dc82c008159936d)
* kernel: Remove patch for kernel 5.15Hauke Mehrtens2022-04-171-48/+0
| | | | | | | | This patch was accidentally backported from master for kernel 5.15 too. Remove the version for kernel 5.15 and keep the version for kernel 5.10. Fixes: 9ab337dfbce7 ("kernel: backport pgalloc memory leak fix") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.111John Audia2022-04-1723-177/+40
| | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch apm821xx/patches-5.10/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit 0085dd6cb5e3c57dd22994c22ce893575711b6f7)
* lantiq: fritz736x: Move GPIO resets to the inidvidual board.dts filesMartin Blumenstingl2022-04-174-32/+77
| | | | | | | | | | | FRITZ!Box 7360 V2 and FRITZ!Box 7360 SL both use GPIOs 37 (for &phy0) and GPIO 44 (for &phy1) to control the PHY's reset lines. FRITZ!Box 7362 SL however uses GPIO 45 (for &phy0) and GPIO 44 (for &phy1). Move the GPIO reset definitions to each individual board .dts and while at it, fix the GPIOs for the FRITZ!Box 7362 SL. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit 56cd49bdc8ff762c52327ee7faa14cb99895e0fd)
* kernel: backport ZTE RNDIS bogus MAC address fixLech Perczak2022-04-173-0/+239
| | | | | | | | | | | | This is required to support built-in modem of ZTE MF286R, in addition to other external modems, such as MF831, MF910, MF920, which refuse to reconfigure their remote MAC address, even if "locally administered" bit is set, leading to dropped traffic towards the host. Add a workaround for that issue already present in cdc_ether to rndis_host driver as well. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit c99013e242682a71051619806f9cc4f4e51a58fa)
* ipq806x: fix wrong CPU OPP for ipq8062Ansuel Smith2022-04-171-16/+16
| | | | | | | | | | Fix wrong CPU OPP for ipq8062. Revision of the SoC added an extra 25mV for every pvs. Also fix the voltage min/max value that were wrong. Reviewed-by: Robert Marko robimarko@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> (cherry picked from commit 3f0d87fd69b13f7d1fa06bdcc951a2896a0a9360)
* ipq806x: fix USB bug in 5.10 dtsi additionsRodrigo Balerdi2022-04-171-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing device tree has incorrect definitions for usb3_0 and usb3_1 and the blocks they depend upon: their addresses and interrupts are swapped. However, their clocks and resets are not. The result is that the USB blocks are non-functional if only one of them is enabled. This fix backports the definitions from mainline Linux 5.15 to OpenWrt's 5.10 dtsi additions. See the relevant mainline code here: https://github.com/torvalds/linux/blob/v5.17/arch/arm/boot/dts/qcom-ipq8064.dtsi#L1062-L1148 This fix does not break existing ports. But some ports may have enabled both USB blocks even thought their board only implements one, because enabling a single USB block would not have worked before this fix. This means that revisiting all ports of ipq806x devices that implement a single USB port is advised. This work must be done by maintainers that can determine which USB block corresponds to the implemented port on their hardware. Note that this fix swaps the names of the hardware ports. This is unfortunate, but will happen anyway when switching to kernel 5.15. Thus, it is best to do this ASAP, before users get to depend on port names. It is strongly recommended that this fix is backported to 22.03 before its release. This will minimize the number of users affected by the port name swap. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> (cherry picked from commit 284f2c2ae0e569660effa61c9f8d0f6459a2ae19)
* ipq806x: remove non-working fixes for USB bug in 5.10 dtsi additionsRodrigo Balerdi2022-04-172-4/+0
| | | | | | | These workarrounds are incomplete and non-functional, and thus not needed. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> (cherry picked from commit 3a4d972d43987e1ab0f697817c0f68d1a4a706dc)
* mpc85xx: overhaul WS-AP3825i LED setupDavid Bauer2022-04-172-12/+31
| | | | | | | | | | | | | As the LED controller is working now, we can make good use of the LEDs now. - Drop the model-name prefix - Rename eth0 / eth1 LEDs to LAN1 / LAN2, as they are labeled as such on the casing - Enable wired LEDs in userspace Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 9024f1e466f5ab64bc752d8a463d1867a2ba8d8e)
* mediatek/mt7622: enable accelerated crypto driversEneas U de Queiroz2022-04-151-0/+10
| | | | | | | | | | Use ARMv8 Crypto Extensions for AES, ghash and sha256. This results in a 16 times speed gain in speed for aes-128-ctr, 17x in aes-128-gcm, and 9 times in sha256. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit c9c2b01b8441195807e8b492c7d3e385e6c6afdc)
* ath79: add support for Yuncore A930Thibaut VARÈNE2022-04-152-0/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit a05dcb07241aa83a4416b56201e31b4af8518981)
* ath79: add support for Yuncore XD3200Thibaut VARÈNE2022-04-155-2/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164)
* kernel: Fix oob layout of XTX XT26G0xAFelix Matouschek2022-04-111-3/+3
| | | | | | | | | | | | | | | | The correct oob layout is: ECC: region->offset = 48; region->length = 16; Free: /* Reserve 1 byte for the BBM. */ region->offset = 1; region->length = 47; Signed-off-by: Felix Matouschek <felix@matouschek.org> (cherry picked from commit a5de91a88a8a33ced147bb5340fd45599f652d4d)
* kernel: Fix readid method of XTX XT26G0xAFelix Matouschek2022-04-111-3/+3
| | | | | | | The correct readid method is SPINAND_READID_METHOD_OPCODE_ADDR. Signed-off-by: Felix Matouschek <felix@matouschek.org> (cherry picked from commit 3711aee56d864fab066d76afadc9d04e1c18102e)
* imagebuilder: export SOURCE_DATE_EPOCH to environmentDaniel Golle2022-04-101-0/+1
| | | | | | | | | Export SOURCE_DATE_EPOCH to environment so filesystem and image creation tools will make use of it. Fixes reproducibility of images generated with the ImageBuilder. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 5cf5dce05ae829ec848ad63a6da300c4fddcd510)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-1057-209/+91
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* ipq40xx: add RT-AC2200 alternative name to RT-AC42U/RT-ACRH17Ray Wang2022-04-101-0/+2
| | | | | | | RT-AC2200 is the same device with a different name. The OEM firmwares have the same MD5. Signed-off-by: Ray Wang <raywang777@foxmail.com> (cherry picked from commit 3204906569768cabcbedb5eaa3a11e2fcb18cd48)
* ath79: Move TPLink WPA8630Pv2 to ath79-tiny targetJoe Mullally2022-04-109-42/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally <jwmullally@gmail.com> Tested-by: Robert Högberg <robert.hogberg@gmail.com> (cherry picked from commit 44e1e5d153d00915a7e516c9af3f440cbd84cf78)
* at91: Automatically detect USB featureHauke Mehrtens2022-04-071-1/+1
| | | | | | | | | | | The sama7 sub target does not have USB support, the feature should not be activated there. OpenWrt can automatically detect if the target supports USB by using the scripts/target-metadata.pl script. With the automatic detection USB support will only get activated on subtargest which actually support USB like sam9x and sama5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit f6d566301ee3dc12fd41e131f89dfc4777b002f3)
* at91/sama7: Do not build in BluetoothHauke Mehrtens2022-04-071-6/+0
| | | | | | | | | | Bluetooth should be activated as an optional kmod package instead of compiling it into the kernel. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 3296881a1d631bc6db38fe72ab73adaa27af6f8c)
* at91/sama7: Use ext4 driver for ext2 and ext3Hauke Mehrtens2022-04-071-6/+0
| | | | | | | | | | Use the ext4 driver for ext2 and ext3 too. This feature is activated in the OpenWrt generic configuration. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 6709b67265d04ee82b1e79e2a6c8eaeca9d5dfe4)
* at91/sama7: Deactivate certification and key systemHauke Mehrtens2022-04-071-16/+0
| | | | | | | | | | This was probably activated by mac80211 which was activated before. mac80211 is build from backports in OpenWrt. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit ac2bc4b893999709776bc93c46e907147aef3a44)
* at91/sama7: Do not activate cgroups and namespacesHauke Mehrtens2022-04-071-17/+0
| | | | | | | | | | cgroups and namespaces should be configured by the generic OpenWrt configuration and not for a specific target. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit a2f1db99f62554699b30de5d379f5b16c1138f41)
* at91/sama7: Remove config options build as moduleHauke Mehrtens2022-04-071-38/+2
| | | | | | | | | | | | | | Remove the configuration options which are building modules for the sub target configuration. These kernel modules are not packaged. Kernel options should only be build as a module when they are selected by a kmod package and not by setting them to =m in the target kernel configuration. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 5a84a8764d9f6e753eb6f11f214b0a3e5cb5ff80)
* kernel: bump 5.10 to 5.10.109Hauke Mehrtens2022-04-072-7/+7
| | | | | | | | | Patches automatically rebased. Compile-tested: lantiq/xrx200 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* qoriq: enable support for Marvell Alaska PHYsStijn Tintel2022-04-051-0/+1
| | | | | | | | | The WatchGuard Firebox M200 and M300 use a Marvell 88e1543 PHY for the first 3 ethernet ports. This PHY is supported by the Marvell Alaska PHY driver, so enable it. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit d7eba8059b3bfe89f90f1d18f1f0d23cbbb42423)
* kernel: mark CONFIG_PSTORE_COMPRESS_DEFAULT as "is not set"Christian Lamparter2022-04-051-1/+1
| | | | | | | | | # CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" this can lead to confusion. Thankfully, in the KConfig world this setting is still interpreted as disabled. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit de4879c1ae92bf625a91ff3f07a65ec0e4bb8ed1)
* ipq40xx: add support for FRITZ!Box 7520Andre Heider2022-04-051-0/+2
| | | | | | | | | | | | | | This model, also know as "1&1 HomeServer", shares the same features as 7530. The vendor firmware has artificial software limitations: only 2 of the 4 LAN-Ports are GBit, and the USB-Host is only v2.0. With OpenWrt, USB is already working at v3.0. Signed-off-by: Andre Heider <a.heider@gmail.com> (updated commit message to reflect current state) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit cb6f4be13703f0224fc462caaeac14e725c72986)
* Revert "octeon: mark source-only"Stijn Tintel2022-04-031-1/+1
| | | | | | | | | | The memory leak is fixed by the kernel patches backported in the previous commit. This reverts commit 1fa8780056a8c7a2e26c8b4d5e6979232f117349. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit f6cda9f06b09c94457e838a28ef300b2f3c6be77)
* kernel: backport pgalloc memory leak fixStijn Tintel2022-04-032-0/+96
| | | | | | | | Backport a fix for the massive memory leak observed in Octeon after switching to kernel 5.10. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 9283359bd53a889a270da4a7d5bbe3eaaa771e70)
* octeon: mark source-onlyStijn Tintel2022-04-011-1/+1
| | | | | | | | There is a hard to reproduce, even harder to track down memory leak in Octeon since kernel 5.10. Mark octeon source-only until it is plugged. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 1fa8780056a8c7a2e26c8b4d5e6979232f117349)
* ath79: migrate Archer C5 5GHz radio device pathsJan-Niklas Burfeind2022-03-311-0/+1
| | | | | | | | | | | | When upgrading a TP-Link Archer C5 v1 from ar71xx to ath79, the 5ghz radio stops working because the device path changed. Same has been done for the Archer C7 before: commit e19506f20618 ("ath79: migrate Archer C7 5GHz radio device paths") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit c6eb63d48f942f1e54737ed182776cf9a08de542)
* ath79: fix label MAC address for Ubiquiti UniFi AP Outdoor+Matthias Schiffer2022-03-303-2/+4
| | | | | | | | | | The label has the MAC address of eth0, not the WLAN PHY address. We can merge the definition back into ar7241_ubnt_unifi.dtsi, as both DTS derived from it use the same interface for their label MAC addresses after all. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit aee9ccf5c1b536189ebee8c232273657334da843)
* realtek: Fix tc default packageHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | The tc package does not exits any more, it was split into tc-tiny, tc-full and tc-bpf. Include tc-bpf by default into realtek images. This increases the compressed image size by about 232KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 34fb36e165d5b6e6e37d33b4b0da789a8f1430bb)
* realtek: Use firewall4Hauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | The realtek target is not a router, but basic device, see DEVICE_TYPE. The basic device type does not come with firewall by default, see include/target.mk for details. The realtek target extended DEFAULT_PACKAGES manually with firewall. This changes the defaults to take firewall4 and nftables instead of firewall and iptables. This also adds the additional package kmod-nft-offload. The only difference to the router type is the missing ppp, ppp-mod-pppoe, dnsmasq and odhcpd-ipv6only package. This increases the compressed image size by about 422KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 469030659c5cb140bdbff1b3d8fc9691f98f984b)
* realtek: Remove dnsmasq and odhcpd-ipv6only from defaultHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | | Do not include the dnsmasq and odhcpd-ipv6only package by default any more. These services are not needed on a switch. If someone needs this it is still possible to use opkg or image builder to add them. This decreases the compressed image size by about 165KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 2acebbdcaafbdfd3f677052c28bc0af04c6b5ab8)
* ipq40xx: WAC510: device-tree overhaulingChristian Lamparter2022-03-272-40/+33
| | | | | | | | | | removes usb-port remains as neither the WAC510 nor the WAC505 come with a USB port. Update the LED properties to phase out labels and introduce generic node-names as well as adding the color, function and function-enumerator properties. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 026fda10a5c45d56fd856628b6e9e69b95fd5e58)
* lantiq: xrx200: replace patch with upstream versionAleksander Jan Bajkowski2022-03-275-101/+402
| | | | | | | | | | | | This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit b4970dab6b0c3e13715f4b13de42d72a74c1c9e9)
* kernel: bump 5.10 to 5.10.108Rui Salvaterra2022-03-277-15/+15
| | | | | | | | | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Tested-by: John Audia <graysky@archlinux.us> Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64 Run-tested: ramips/mt7621, mvebu Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 2c26eb4e484fe6d7a8159a22f97b6db7ca6e9221)
* x86: Add support for Sophos XG 85 and XG 86 devicesRaylynn Knight2022-03-272-2/+3
| | | | | | | | | | | | | This commit builds on previous efforts to add support for Sophos devices. * Add support for Sophos XG 85 with/without wireless * Add support for Sophos XG 86 with/without wireless Tested on Sophos XG 85w rev1 and XG 86 rev 1 Signed-off-by: Raylynn Knight <rayknight@me.com> (cherry picked from commit c7bcbcd49280a79b287cc072cd0ca7de777a7ac4)
* generic: sync mtd rootfs hack with part_bitsDaniel Golle2022-03-271-1/+1
| | | | | | | | | | | | | | | In commit ab143647ef ("kernel: generic: improve FIT partition parser") part_bits was bumped to 2 in order to allow up to 3 additional FIT sub-images mapped into sub-partitions. This change has to be reflected also in our local patch 420-mtd-set-rootfs-to-be-root-dev.patch which still assumed part_bits==1 for mtdblock devices in case of CONFIG_FIT_PARTITION=y. Fixes: #9557 Fixes: ab143647ef ("kernel: generic: improve FIT partition parser") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 13960fb0e0babcd99530fcb234073af0c0a5e2f5)
* kernel: generic: fix warning in FIT partition parserDaniel Golle2022-03-271-2/+2
| | | | | | | Use 'const char *' where necessary to make gcc get quiet. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit d3a4607fc61f890d5d4bedef6e542046038294d9)
* kernel: generic: improve FIT partition parserDaniel Golle2022-03-272-13/+41
| | | | | | | | | | * only map filesystems configured in 'loadables' * allow mapping more than one filesystem (e.g. customization/branding or localization in addition to rootfs) * small cleaning here and there Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ab143647efef2a13bcce2f28a2797899fbc83946)
* kernel: generic: use chosen bootconf in FIT partition parserDaniel Golle2022-03-271-4/+13
| | | | | | | | | | If the selected boot configuration is stored by U-Boot in '/chosen' node as 'bootconf' attribute, use that configuration to resolve the block device used as rootfs. Fall back to use the default configuration in case 'bootconf' is not present. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 503f3b9f0e9693bb983a0f259aa4ba106a690140)
* kernel: add (disabled) ASYMMETRIC_TPM_KEY_SUBTYPE symbolChristian Lamparter2022-03-271-0/+1
| | | | | | | | | | | | | | | at91/sama7 fails to build due to: | Asymmetric (public-key cryptographic) key type (ASYMMETRIC_KEY_TYPE) [Y/?] y | Asymmetric public-key crypto algorithm subtype (ASYMMETRIC_PUBLIC_KEY_SUBTYPE) [Y/?] y | Asymmetric TPM backed private key subtype (ASYMMETRIC_TPM_KEY_SUBTYPE) [N/m/?] (NEW) |Error in reading or end of file. please note that asym_tpm (module) has been removed in 5.17: <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d3cff4a9> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 638771509383cf36617c49b9cc1e0c4a9aedaa0d)
* ipq40xx: update E2600AC c1/c2 board张 鹏2022-03-264-16/+28
| | | | | | | | | | Modified the radio frequency hardware part of e2600ac c1/c2, need to cooperate with the modified board.bin file, the device can work normally. Signed-off-by: 张 鹏 <sd20@qxwlan.com> (cherry picked from commit bdc786e82c13547b01bd8f699d00598a974c14f6) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 02:56:29 +0000