aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ath79: Add support for Buffalo WZR-HP-G300NHMauri Sandberg2021-03-226-5/+335
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device is a wireless router working on 2.4GHz band based on Qualcom/Atheros AR9132 rev 2 SoC and is accompanied by Atheros AR9103 wireless chip and Realtek RTL8366RB/S switches. Due to two different switches being used also two different devices are provided. Specification: - 400 MHz CPU - 64 MB of RAM - 32 MB of FLASH (NOR) - 3x3:2 2.4 GHz 802.11bgn - 5x 10/100/1000 Mbps Ethernet - 4x LED, 3x button, On/Off slider, Auto/On/Off slider - 1x USB 2.0 - bare UART header place on PCB Flash instruction: - NOTE: Pay attention to the switch variant and choose the image to flash accordingly. (dmesg / kernel logs can tell it) - Methods for flashing - Apply factory image in OEM firmware web-gui. - Sysupgrade on top of existing OpenWRT image - U-Boot TFPT recovery for both stock or OpenWRT images: The device U-boot contains a TFTP server that by default has an address 192.168.11.1 (MAC 02:AA:BB:CC:DD:1A). During the boot there is a time window, during which the device allows an image to be uploaded from a client with address 192.168.11.2. The image will be written on flash automatically. 1) Have a computer with static IP address 192.168.11.2 and the router device switched off. 2) Connect the LAN port next to the WAN port in the device and the computer using a network switch. 3) Assign IP 192.168.11.1 the MAC address 02:AA:BB:CC:DD:1A arp -s 192.168.11.1 02:AA:BB:CC:DD:1A 4) Initiate an upload using TFTP image variant curl -T <imagename> tftp://192.168.11.1 5) Switch on the device. The image will be uploaded subsequently. You can keep an eye on the diag light on the device, it should keep on blinking for a while indicating the writing of the image. General notes: - In the stock firmware the MAC address is the same among all interfaces so it is left here that way too. Recovery: - TFTP method - U-boot serial console Differences to ar71xx platform - This device is split in two different targets now due to hardware being a bit different under the hood. Dynamic solution within the same image is left for later time. - GPIOs for a sliding On/Off switch, marked 'Movie engine' on the device cover, were the wrong way around and were renamed qos_on -> movie_off, qos_off -> movie_on. Associated key codes remained the same they were. The device tree source code is mostly based on musashino's work Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
* ath79: cfi: cmdset_0002: amd chip 0x2201 - write wordsMauri Sandberg2021-03-221-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | Generally, in upstream CFI flash memory driver uses buffers for write operations. That does not work with AMD chip with id 0x2201 and we must resort to writing word sized chunks only. That is, to not apply general buffer write functionality for this given chip. Without the patch kernel logs will be flooded with entries like below: MTD do_erase_oneblock(): ERASE 0x01fa0000 MTD do_write_buffer(): WRITE 0x01fa0000(0x00001985) MTD do_erase_oneblock(): ERASE 0x01f80000 MTD do_write_buffer(): WRITE 0x01f80000(0x00001985) MTD do_write_buffer_wait(): software timeout, address:0x01f8000a. jffs2: Write clean marker to block at 0x01a60000 failed: -5 MTD do_erase_oneblock(): ERASE 0x01f60000 MTD do_write_buffer(): WRITE 0x01f60000(0x00001985) MTD do_write_buffer_wait(): software timeout, address:0x01f6000a. jffs2: Write clean marker to block at 0x01a40000 failed: -5 References: http://patchwork.ozlabs.org/project/linux-mtd/patch/20210309174859.362060-1-sandberg@mailfence.com/ Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> [added link to usptream fix submission] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm4908: backport the latest bcm_sf2 commitsRafał Miłecki2021-03-226-111/+210
| | | | | | | 1. CFP support for BCM4908 2. Upstream RGMII regs fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport DTS patch with Ethernet TX IRQRafał Miłecki2021-03-222-1/+31
| | | | | | It allows bcm4908_enet Linux driver to work more efficiently. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add MTD support for repartitioningRafał Miłecki2021-03-221-0/+28
| | | | | | | | | It's required for sysupgrade which requires: 1. Flashing new firmware 2. Finding updated bootfs partition 3. Updating bootfs content Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: fix lan port display order for sitecom wlr-7100Walter Sonius2021-03-211-1/+1
| | | | | | | | | | Physical port order watched from the back of the device is: 4 / 3 / 2 / 1 / WAN which also matches corresponding leds. This patch corrects LuCI switch webpage LAN port order. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [improve commit title, fix sorting in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.106John Audia2021-03-2152-140/+140
| | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx/950-0993-xhci-quirks-add-link-TRB-quirk-for-VL805.patch layerscape/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [remove accidental whitespace edit] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for ELECOM WRC-1750GST2INAGAKI Hiroshi2021-03-212-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: create shared DTSI for MT7620 Phicomm K2x series devicesShiji Yang2021-03-214-115/+31
| | | | | | | | | Improve compatibility of the device tree include file. Now a new .dtsi file will support both PSG1218A, PSG1218B and K2G. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [improve commit title, rebase] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: increase SPI frequency for Phicomm series devicesShiji Yang2021-03-214-4/+8
| | | | | | | | | | | From many teardown image in the internet, I find Phicomm K1/k2 series use Winbond W25Q64/W25Q128 or GigaDevice GD25Q64/GD25Q128 Flash chips. both of them support 100+ MHz clock spi operate and fast-read instruction. PSG1218 with W25x or GD25x has been tested and it can run well in OpenWrt v19.07. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [improve commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: increase SPI frequency for HIWIFI HC5x61 devicesShiji Yang2021-03-211-1/+2
| | | | | | | | | | | HIWIFI HC5x61 devices support high speed spi clock up to 100+ MHz. So set spi frequency to 80 MHz here (Due to frequency division the real clock is 48 MHz). I have tested HC5661 and it can run well in OpenWrt v19.07. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [adjust commit title and wrap message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: linksys-e8450: remove left-overs from dtsiDaniel Golle2021-03-211-9/+0
| | | | | | | | | | | There is an ASMedia ASM1480 PCIe switch found on mt7622-rfb1 and the BPi-R64, allowing the user to switch between SATA and PCIe1 which share the same pins on the SoC. This chip is not present on the Linksys E8450, it doesn't have SATA. Remove definitions for GPIO90 from DTSI to prevent it from being copy&pasted or otherwise causing confusion. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835Álvaro Fernández Rojas2021-03-211-0/+1
| | | | | | | | It was removed in bac74aff5e36, but it should have been disabled. More info: https://forum.openwrt.org/t/make-image-stops-at-random-number-generator-bcm27xx/91429/7 Fixes: bac74aff5e36 ("bcm27xx: bcm2711: disable HW_RANDOM_BCM2835") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: Add missing kernel config optionsHauke Mehrtens2021-03-191-0/+2
| | | | | | These two options are missing when building the x86 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Reorder kernel configuration optionsHauke Mehrtens2021-03-192-12/+9
| | | | | | | | | | | Reorder the options and remove double entries. This was generated by running this: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.10 /dev/null > target/linux/generic/config-5.10.new $ mv target/linux/generic/config-5.10.new target/linux/generic/config-5.10 $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.4 /dev/null > target/linux/generic/config-5.4.new $ mv target/linux/generic/config-5.4.new target/linux/generic/config-5.4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* archs38: Add CONFIG_HZ=100Hauke Mehrtens2021-03-191-0/+1
| | | | | | | This kernel config option was missing and resulted in a question when building. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add exfat againRosen Penev2021-03-191-0/+6
| | | | | | | | | | | | With kernel 5.10, exfat is out of staging and in tree. Added small hack to make it work with kernel 5.4 as well. Added removed config options for 5.4 to generic config. Signed-off-by: Rosen Penev <rosenp@gmail.com> [Set CONFIG_EXFAT_ config options to default values] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: enable WRT1900AC v1 and WRT32X for buildbotsTad Davanzo2021-03-191-2/+0
| | | | | | | Kernel size limits have been dealt with. Effective revert of a1eb2c46 and ac9730c4. Signed-off-by: Tad Davanzo <tad@spotco.us>
* mvebu: venom resize kernel to 6MBTad Davanzo2021-03-193-7/+8
| | | | | | | | | | | | | | | | | | | | | | | venom has a 3MB kernel partition as specified by the DTS. 3MB is not sufficient for building with many kernel modules or newer kernel versions. venom uboot however as set from factory will load up to 6MB. This can be observed by looking a uboot log: NAND read: device 0 offset 0x900000, size 0x600000 6291456 bytes read: OK and from uboot environment variables: $ fw_printenv | grep "priKernSize"; priKernSize=0x0600000 Resize the root partitions from 120MB to 117MB to let kernel expand into it another 3MB. And set kernel target size to 6MB. Lastly set the kernel-size-migration compatibility version on venom to prevent sysupgrading without first reinstalling from a factory image. Signed-off-by: Tad Davanzo <tad@spotco.us>
* mvebu: mamba resize kernel to 4MBTad Davanzo2021-03-194-2/+92
| | | | | | | | | | | | | | | | | | | | | | | | mamba has a 3MB kernel partition as specified by the DTS. 3MB is not sufficient for building with many kernel modules or newer kernel versions. mamba uboot however as set from factory will load up to 4MB. This can be observed by looking a uboot log: NAND read: device 0 offset 0xa00000, size 0x400000 4194304 bytes read: OK and from uboot environment variables: $ fw_printenv | grep "pri_kern_size"; pri_kern_size=0x400000 Resize the root partitions from 37MB to 36MB to let kernel expand into it another 1MB. And set kernel target size to 4MB. Lastly add a compatibility version message: kernel-size-migration. And set it on mamba to prevent sysupgrading without first reinstalling from a factory image. Signed-off-by: Tad Davanzo <tad@spotco.us>
* kernel: add missing config symbols, fix typosTony Ambardar2021-03-196-9/+15
| | | | | | | | | | Update 5.10 generic config to add missing options prompting during builds, when setting CONFIG_ALL_KMODS. Refresh the x86 subtargets to drop symbols added to the generic config. Also fix a typo in 5.4/5.10 generic configs: "CONFIG_CONFIG_KVM_AMD_SEV". Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq806x: work-around vendor 'rootfs_data' GPT partitionDaniel Golle2021-03-191-1/+1
| | | | | | | | | | ZyXEL NBG6817 comes with an eMMC which contains a GPT partition named 'rootfs_data'. This currently confuses fstools and makes it pick that (not suitable) partition. Use the newly introduced fstools_ignore_partname=1 kernel cmdline parameter to have fstools ignore that partition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: backport b53 mmap device tree supportÁlvaro Fernández Rojas2021-03-191-13/+23
| | | | | | This patch has been accepted upstream for linux v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: backport b53 legacy tags supportÁlvaro Fernández Rojas2021-03-193-88/+216
| | | | | | These patches have been accepted upstream for linux 5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: backport upstream dsa b53 is63xx patchÁlvaro Fernández Rojas2021-03-191-3/+5
| | | | | | This patch has been accepted for linux v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: move spi-nor-add-gd25q512 patch to genericIlya Lipnitskiy2021-03-191-0/+0
| | | | | | | A SPI NOR flash should not be target-specific, so move it to generic in case another platform needs to use it. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* rampis: use lzma-loader for ZTE MF283+Lech Perczak2021-03-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Without that, after merging support to master, the device fails to boot due to LZMA decompression error: 3: System Boot system code via Flash. ## Booting image at bc080000 ... raspi_read: from:80000 len:40 . Image Name: MIPS OpenWrt Linux-5.4.99 Created: 2021-02-25 23:35:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1786664 Bytes = 1.7 MB Load Address: 80000000 Entry Point: 80000000 raspi_read: from:80040 len:1b4328 ............................ Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover Use lzma-loader to fix it. Fixes: 59d065c9f81c ("ramips: add support for ZTE MF283+") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ramips: improve GPIO pin control for HC5x61Shiji Yang2021-03-193-22/+16
| | | | | | | | HC5661 does not have USB port, remove usb power control pin. HC5x61 do not have LAN LEDs, remove ethernet LED control pin. Only HC5861 has PA in 2.4G channel. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2021-03-1936-86/+23
| | | | | | Move some disabled symbols found in armvirt target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* lantiq: set maximum kernel size for ARV7519RW22Aleksander Jan Bajkowski2021-03-181-0/+2
| | | | | | | | | | Some users report that current snapshot producies non-bootable images. Stock uboot can boot images if the kernel is smaller than 2MB. Set maximum kernel size and disable image building for this board. Ref: https://forum.openwrt.org/t/astoria-arv7519rw22-bootloops-after-upgrade/89843 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* mediatek: fix broken UniFi 6 LR imageDavid Bauer2021-03-181-0/+1
| | | | | | | | Ubiquiti's own bootloader expects the configuration mode to be present with a "@" instead of a "-" for the sperator character. Otherwise booting of the image fails. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix broken UniFi 6 Lite imageDavid Bauer2021-03-181-0/+1
| | | | | | | | Ubiquiti's own bootloader expects the configuration mode to be present with a "@" instead of a "-" for the sperator character. Otherwise booting of the image fails. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2Hauke Mehrtens2021-03-171-1/+0
| | | | | | | This fixes writing to the U-Boot environment by making the partition writable and setting the correct flash sector size of 128K. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1Daniel Golle2021-03-173-1/+82
| | | | | | | | | | The Bananapi BPi-R64 got a SATA interface which cannot be used at the same time as the second mPCIe slot. The decission is made by hogging GPIO 90. Embed two addtional DT overlay blobs into the image to allow bootloader selection of either SATA or PCIE1 feature. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* include/image*: add support for device-tree overlaysDaniel Golle2021-03-171-0/+3
| | | | | | | | | | | Add new target feature 'dt-overlay' which makes DTC keep the symbol names in the generated dtb. Make sure additional DT overlay sources specified by the new device variable DEVICE_DTS_OVERLAY get compiled together with the main DTS (currently overlays got to be in the same folder). Let Build/fit pass the generated DT overlay blobs to mkits.sh. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: fix RS-485 on Teltonika RUT-955Daniel Golle2021-03-173-14/+6
| | | | | | | | | DTR GPIO isn't actually needed and triggers boot warning. TX pin was off by one (GPIO 19 instead of GPIO 18). Reported-by: @tophirsch Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* malta: prune subtarget configsTony Ambardar2021-03-174-62/+0
| | | | | | | Drop autogenerated kernel config options. These aren't needed to build and can obscure options relevant to the subtarget. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* malta: update kernel 5.10 configsTony Ambardar2021-03-171-62/+9
| | | | | | | Update generic config to add missing options that prompt during builds. Run "make kernel_oldconfig" to refresh malta target config. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* malta: support kernel 5.10Tony Ambardar2021-03-172-0/+341
| | | | | | Add linux 5.10 as testing kernel and copy generic config from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* realtek: enable SerDes NWAY and SGMII negotiationBjørn Mork2021-03-172-3/+42
| | | | | | | This allows copper SFPs to negotiate speeds lower than 1gig. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: enabled Marvell and Realtek PHYsBjørn Mork2021-03-171-0/+2
| | | | | | | | | | The rtl83xx-phy driver is necessary for proper configuration of the PHYs if U-Boot hasn't done that. 1000Base-T SFPs often contains a Marvell 88E1111 and will not work without this driver. Include it by default to support copper SFPs. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: enable HWMON for SFP sensorsBjørn Mork2021-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds SFP sensors as a hwmon device, allowing readout of temperatures, DOM and other sensor readings available from the SFP. Example from a ZyXEL GS1900-10HP with a DOM capable 1000Base-SX SFP: root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/* /sys/class/hwmon/hwmon0/curr1_crit:90 /sys/class/hwmon/hwmon0/curr1_crit_alarm:0 /sys/class/hwmon/hwmon0/curr1_input:4 /sys/class/hwmon/hwmon0/curr1_label:bias /sys/class/hwmon/hwmon0/curr1_lcrit:0 /sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/curr1_max:85 /sys/class/hwmon/hwmon0/curr1_max_alarm:0 /sys/class/hwmon/hwmon0/curr1_min:0 /sys/class/hwmon/hwmon0/curr1_min_alarm:0 /sys/class/hwmon/hwmon0/in0_crit:3795 /sys/class/hwmon/hwmon0/in0_crit_alarm:0 /sys/class/hwmon/hwmon0/in0_input:3317 /sys/class/hwmon/hwmon0/in0_label:VCC /sys/class/hwmon/hwmon0/in0_lcrit:2805 /sys/class/hwmon/hwmon0/in0_lcrit_alarm:0 /sys/class/hwmon/hwmon0/in0_max:3465 /sys/class/hwmon/hwmon0/in0_max_alarm:0 /sys/class/hwmon/hwmon0/in0_min:3135 /sys/class/hwmon/hwmon0/in0_min_alarm:0 /sys/class/hwmon/hwmon0/name:sfp_p10 /sys/class/hwmon/hwmon0/power1_crit:708 /sys/class/hwmon/hwmon0/power1_crit_alarm:0 /sys/class/hwmon/hwmon0/power1_input:259 /sys/class/hwmon/hwmon0/power1_label:TX_power /sys/class/hwmon/hwmon0/power1_lcrit:89 /sys/class/hwmon/hwmon0/power1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power1_max:501 /sys/class/hwmon/hwmon0/power1_max_alarm:0 /sys/class/hwmon/hwmon0/power1_min:126 /sys/class/hwmon/hwmon0/power1_min_alarm:0 /sys/class/hwmon/hwmon0/power2_crit:1259 /sys/class/hwmon/hwmon0/power2_crit_alarm:0 /sys/class/hwmon/hwmon0/power2_input:404 /sys/class/hwmon/hwmon0/power2_label:RX_power /sys/class/hwmon/hwmon0/power2_lcrit:6 /sys/class/hwmon/hwmon0/power2_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power2_max:794 /sys/class/hwmon/hwmon0/power2_max_alarm:0 /sys/class/hwmon/hwmon0/power2_min:10 /sys/class/hwmon/hwmon0/power2_min_alarm:0 /sys/class/hwmon/hwmon0/temp1_crit:100000 /sys/class/hwmon/hwmon0/temp1_crit_alarm:0 /sys/class/hwmon/hwmon0/temp1_input:22547 /sys/class/hwmon/hwmon0/temp1_label:temperature /sys/class/hwmon/hwmon0/temp1_lcrit:-50000 /sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/temp1_max:85000 /sys/class/hwmon/hwmon0/temp1_max_alarm:0 /sys/class/hwmon/hwmon0/temp1_min:-40000 /sys/class/hwmon/hwmon0/temp1_min_alarm:0 /sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1 Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: re-enable sfp driver for ZyXEL GS1900-10HPBjørn Mork2021-03-171-18/+6
| | | | | | | | | | | | | There is no need to define a static link or a phy for the sfp ports. Using phy-mode and managed properties to describe the link to the sfp phy. We have to keep the now unconnected virtual "phys" because the switch driver uses their "phy-is-integrated" property to figure out which ports to enable as fibre ports. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: need to handle PHY_INTERFACE_MODE_NA for sfpsBjørn Mork2021-03-171-0/+1
| | | | | | | | | | From the validate docs in include/linux/phylink.h: When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the MAC driver to return all supported link modes. Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: fix link-state interruptBjørn Mork2021-03-171-4/+3
| | | | | | | This bug was the root cause for the failing sfp driver. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* bcm4908: backport recent bcm_sf2 changesRafał Miłecki2021-03-177-8/+265
| | | | | | One 5.12 link fix and 5.13 crossbar support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport recent bcm4908_enet changesRafał Miłecki2021-03-164-0/+431
| | | | | | This includes 5.12 fix and 5.13 improvements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build,ib: add STRIP_ABI option for manifestPaul Spooren2021-03-161-1/+2
| | | | | | | | | | | | The ImageBuilder `make manifest` prints all installed packages. This function can be used to create a list of package and corresponding package versions before attempting image creation. When called with `--strip-abi` OPKG can automatically strip attached ABIVersions from package names. Make this function accessible for the ImageBuilder by adding a `STRIP_ABI` variable. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bmips: backport bcm6368-mdio-mux supportÁlvaro Fernández Rojas2021-03-162-7/+109
| | | | | | This patch has been accepted for linux v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enable CONFIG_B53_MDIO_DRIVERÁlvaro Fernández Rojas2021-03-161-1/+1
| | | | | | Some devices have external switches connected by MDIO. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 16:50:03 +0000