aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* bcm63xx: Remove patch already in Linux stableHauke Mehrtens2022-02-011-34/+0
| | | | | | | Remove the 434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch, it was already applied to Linux 5.10.37 and is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-018-18/+18
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.95Rui Salvaterra2022-02-012-4/+4
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-01132-459/+380
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: add MikroTik cAP ac supportAlar Aun2022-02-018-1/+279
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD (cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/cap_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port, PoE in and passive PoE out Unsupported: - PoE out Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Alar Aun <alar.aun@gmail.com>
* Revert "ramips: add support for ipTIME AX2004M"Stijn Tintel2022-02-014-192/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f4a79148f8cb ("ramips: add support for ipTIME AX2004M") seems to leak KERNEL_LOADADDR 0x82000000 to other devices, causing the to no longer boot. The leak is visible in u-boot: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0x840000e4 Data Size: 10750165 Bytes = 10.3 MiB Architecture: MIPS OS: Linux Load Address: 0x82000000 Entry Point: 0x82000000 Normally, it should look like this: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0xbfca00e4 Data Size: 2652547 Bytes = 2.5 MiB Architecture: MIPS OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Revert the commit to avoid more people soft-bricking their devices. This reverts commit f4a79148f8cbb7dfbcddfb0c1128caec45a01596. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm4908: backport first 5.18 DTS changesRafał Miłecki2022-02-017-40/+424
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: af8a059bb41d ("ath79: add support for GL.iNet GL-XE300") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq806x: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: f44e933458b1 ("ipq806x: provide WiFI mac-addresses from dts") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: improve support for Dongwon T&I DW02-412HSungbo Eo2022-02-015-75/+60
| | | | | | | | | * Move &nand node to DTSI * Utilize nvmem for fetching caldata * Rename build recipe, clean before build * Simplify KERNEL definition Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mediatek: mt7623: simplify partition generationDaniel Golle2022-01-311-6/+1
| | | | | | | | | The two options 'emmc' and 'sdmmc' now became identical lines after introducing CONFIG_TARGET_ROOTFS_PARTSIZE. Remove the now useless if-clauses. Fixes: a40b4d335a ("mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZE") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: u7623-02: enable early console also in legacy imageDaniel Golle2022-01-311-1/+1
| | | | | | | | Append 'earlycon=uart8250,mmio32,0x11004000' to the boot arguments embedded in device-tree in order to enable early console on the UniElec U7623 board when using the vendor/stock bootloader. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: backport bcm_sf2 patch for better LED registers supportRafał Miłecki2022-01-316-4/+422
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fixup pinctrl patches for kernel 5.4Rafał Miłecki2022-01-312-7/+8
| | | | | Fixes: b0145891676f ("bcm4908: backport BCM4908 pinctrl driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport BCM4908 pinctrl driverRafał Miłecki2022-01-316-0/+1492
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: ASUS RP-AC66 use flash till the endTamas Balogh2022-01-302-2/+2
| | | | | | | | | | | | This makes available the additional space, which was occupied by OEM's jffs2 partition before: "0x000000f80000-0x000001000000 : jffs2" Reverting to the OEM firmware will also recover this partition, i.e. it is not needed and can be used by OpenWrt. Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com>
* ramips: add support for Wavlink WL-WN535K1Davide Fioravanti2022-01-304-0/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wavlink WL-WN535K1 is a "mesh" router with 2 gigabit ethernet ports and one fast ethernet port. Mine is branded as Talius TAL-WMESH1. It can be found in kits of 2 or 3 (WL-WN535K2 or WL-WN535K3). The motherboard is labelled as WS-WN535G3-B-V1.2 so this image could potentially work for WL-WN535G3R and WS-WN535G3R with little to none effort, but it's untested. Hardware -------- SoC: Mediatek MT7620A RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CS) ETH: - 2x 10/100/1000 Mbps Ethernet (RTL8211F) - 1x 10/100 Mbps Ethernet (integrated in SOC) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 internal antennas BTN: - 1x Reset button - 1x Touchlink button (set to WPS) - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 3x Green leds (ethernet port status/act) UART: - 57600-8-N-1 Everything works correctly. Currently there is no firmware update available. Because of this, in order to restore the OEM firmware, you must firstly dump the OEM firmware from your router before you flash the OpenWrt image. Backup the OEM Firmware ----------------------- The following steps are to be intended for users having little to none experience in linux. Obviously there are many ways to backup the OEM firmware, but probably this is the easiest way for this router. Procedure tested on WN535K1_V1510_200916 firmware version. 1) Go to http://192.168.10.1/webcmd.shtml 2) Type the following line in the "Command" input box and then press enter: mkdir /etc_ro/lighttpd/www/dev; dd if=/dev/mtd0ro of=/etc_ro/lighttpd/www/dev/mtd0ro 3) After few seconds in the textarea should appear this output: 16384+0 records in 16384+0 records out If your output doesn't match mine, stop reading and ask for help in the forum. 4) Open in another tab http://192.168.10.1/dev/mtd0ro to download the content of the whole NOR. If the file size is 0 byte, stop reading and ask for help in the forum. 5) Come back to the http://192.168.10.1/webcmd.shtml webpage and type: rm /etc_ro/lighttpd/www/dev/mtd0ro;for i in 1 2 3 4 5; do dd if=/dev/mtd${i}ro of=/etc_ro/lighttpd/www/dev/mtd${i}ro; done 6) After few seconds, in the textarea should appear this output: 384+0 records in 384+0 records out 128+0 records in 128+0 records out 128+0 records in 128+0 records out 14720+0 records in 14720+0 records out 1024+0 records in 1024+0 records out If your output doesn't match mine, stop reading and ask for help in the forum. 7) Open the following links to download the partitions of the OEM FW: http://192.168.10.1/dev/mtd1ro http://192.168.10.1/dev/mtd2ro http://192.168.10.1/dev/mtd3ro http://192.168.10.1/dev/mtd4ro http://192.168.10.1/dev/mtd5ro If one (or more) of these files are 0 byte, stop reading and ask for help in the forum. 8) Store these downloaded files in a safe place. 9) Reboot your router to remove any temporary file in ram. Installation ------------ Flash the initramfs image in the OEM firmware interface (http://192.168.10.1/update_mesh.shtml). When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Restore OEM Firmware -------------------- Flash the "mtd4ro" file you previously backed-up directly from LUCI. Warning: Remember to not keep settings! Warning2: Remember to force the flash. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:E2 (factory @ 0x28) WAN XX:XX:XX:XX:XX:E3 (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:E4 (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:E5 (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:E5 2) The OEM firmware upgrade page accepts only files containing the string "WN535K1" in the filename. 3) Additional notes 1,2,3 in the WS-WN583A6 commit are still valid (https://github.com/openwrt/openwrt/commit/92780d80ab6f5f03fac2407c06eb267dd83914a1) Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> [remove trailing whitespace] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for ipTIME AX2004MSungbo Eo2022-01-294-0/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME AX2004M is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specification: * SoC: MT7621A * RAM: 256 MiB * Flash: NAND 128 MiB * Wi-Fi: * MT7915D: 2.4/5 GHz (DBDC) * Ethernet: 5x 1GbE * Switch: SoC built-in * USB: 1x 3.0 * UART: J4 (115200 baud) * Pinout: [3V3] (TXD) (RXD) (GND) MAC address: | interface | MAC | source | comment |-----------|-------------------|----------------|--------- | LAN | 58:XX:XX:00:XX:9B | | [1] | WAN | 58:XX:XX:00:XX:99 | | | WLAN 2G | 58:XX:XX:00:XX:98 | factory 0x4 | | WLAN 5G | 5A:XX:XX:40:XX:98 | | | | | | | | 58:XX:XX:00:XX:98 | config ethaddr | [1] Used in this patch as WLAN 5G MAC address with the local bit set Load address: * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry Installation via **recovery** mode: 1. Press reset button, power up the device, wait >10s for CPU LED to stop blinking. 2. Upload recovery image through the recovery web page at 192.168.0.1. Revert to stock firmware: 1. Install stock image via recovery mode. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: make the relocation address configurableSungbo Eo2022-01-291-1/+1
| | | | | | | | | If no argument is given to relocate-kernel, KERNEL_LOADADDR will be used just as before. This is a preparation for ramips support of ipTIME AX2004M. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: add support for ipTIME NAS1dualSungbo Eo2022-01-294-0/+337
| | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: remove duplicate CONFIG_POWER_RESET entriesSungbo Eo2022-01-293-6/+1
| | | | | | | The option is already enabled in the target config since 9149ed4f05f8 ("mvebu: cortexa9: Add support for Ctera C200-V2"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-295-4/+3
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for ipTIME NAS1Sungbo Eo2022-01-296-0/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: rework 02_networkSungbo Eo2022-01-291-42/+67
| | | | | | | Just like other targets do, introduce two setup functions for interfaces and MAC addresses. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: drop kernel 5.4 supportSungbo Eo2022-01-2920-1937/+0
| | | | | | | It has been 3 months since we switched this target to 5.10, now we can remove the 5.4 files. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: move bootargs-append patch to genericSungbo Eo2022-01-294-7/+7
| | | | | | | | | | This moves bootargs-append support patch from ipq40xx and ipq806x to generic. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This is a preparation for kirkwood support of ipTIME NAS1. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-2817-75/+33
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* octeontx: Refresh kernel configurationHauke Mehrtens2022-01-281-7/+1
| | | | | | | Refresh the kernel configuration. No manual changes done. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add CONFIG_CRYPTO_DEV_OCTEONTX_CPT kernel config optionHauke Mehrtens2022-01-281-0/+1
| | | | | | | This new kernel configuration option is available when building the octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix compile warningHauke Mehrtens2022-01-282-4/+8
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arc770: Remove arc770 targetHauke Mehrtens2022-01-2810-411/+0
| | | | | | | | | | | | | | | | | The arc700 target is not booting up since some time, see here: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/400 It looks like there is a problem in the toolchain when using glibc. Currently no one is working on fixing this problem, remove the target instead. This target also does not have many users we are aware of. If someone wants to have this target back, feel free to add a fixed version of this target again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: enable I2C_CHARDEV in mt7621/config-5.10Stijn Tintel2022-01-281-0/+1
| | | | | | | | I2C_CHARDEV used to be enabled in mt7621/config-5.4. Enable it in the 5.10 config, as it's required for PoE control on Unifi Switch Flex. Fixes: b4aad29a1d7a ("ramips: add support for kernel 5.10") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-282-181/+1
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* sdk: ship llvm toolchainFelix Fietkau2022-01-271-2/+1
| | | | | | This allows ebpf packages like qosify to be built with it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rockchip: disable UHS modes for NanoPi R4SDavid Bauer2022-01-271-0/+26
| | | | | | | | | | | The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting while U-Boot requires the card to be in 3.3V mode. Remove UHS support from the SD controller so the card remains in 3.3V mode. This reduces transfer speeds but ensures a reboot whether from userspace or following a kernel panic is always working. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: mt7623: include regular AHCI PCI driverDaniel Golle2022-01-251-1/+1
| | | | | | | | | The legacy image for the UniElec U7623-02 until now included kmod-ata-ahci-mtk. The MT7623 chip doesn't have that IP and that board uses a PCIe-connected AHCI controller for the SATA port and mSATA-pins of the mPCIe socket. Hence include kmod-ata-ahci instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: drop 5.4 kernelRobert Marko2022-01-2448-7415/+0
| | | | | | | Since 5.10 is now default, no point in keeping 5.4 around. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mediatek: store random MAC address in U-Boot env on first bootDaniel Golle2022-01-231-0/+14
| | | | | | | For devboards without a MAC address assigned from factory, store the random MAC in U-Boot env on first boot to make it persistent. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add configuration for UniElec U7623 boardDaniel Golle2022-01-231-5/+5
| | | | | | | Add U-Boot env settings to allow accessing the environment using fw_printenv and fw_setenv tools on the UniElec U7623 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: rework images for U7623-02 boardDaniel Golle2022-01-2313-313/+95
| | | | | | | | | | | | | | | | | | | | | | Users of older OpenWrt versions need sysupgrade using the *emmc.img.gz file once which will upgrade U-Boot and switch to the new image layout. Users of the vendor firmware need to first flash the legacy image to then sunsequently carry out a full-flash upgrade. Alternatively the board can also be flashed using MediaTek's proprietary SP Flash Tool. Configuration as well as persistent MAC address will be lost once at this point and you will have to redo (or restore) all configuration manually. To restore the previous persistent MAC address users may set it manually using fw_setenv ethaddr 00:11:22:33:44:55 For future upgrades once running OpenWrt past this commit, the usual *sysupgrade.itb file can be used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add common DTS aliases for UniElec U7623 boardDaniel Golle2022-01-231-2/+8
| | | | | | | | * Use serial0 instead of serial2 for the only serial port * Add LED aliases * Add ethernet0 alias to inherit ethaddr from U-Boot env Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uml: make use of 'rootfs-part' featureDaniel Golle2022-01-231-1/+1
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_uml in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: make use of 'rootfs-part' featureDaniel Golle2022-01-231-1/+1
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_sunxi in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* omap: make use of 'rootfs-part' featureDaniel Golle2022-01-231-1/+1
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_omap in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZEDaniel Golle2022-01-233-5/+5
| | | | | | | Enable 'rootfs-part' feature to make the size of the partition of the production image configurable instead of hard-coding it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for GL.iNet GL-XE300Victorien Molle2022-01-222-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL.iNet GL-XE300 is a 4G LTE Wireless router, based on QCA9531 SoC. Specifications: - SoC: QCA9531 (650MHz) - RAM: DDR2 128M - Flash: SPI NOR 16M + SPI NAND 128M - WiFi: 2.4GHz with 2 antennas - Ethernet: - 1x LAN (10/100M) - 1x WAN (10/100M) - LTE: - USB: 1x USB 2.0 port - UART: - 3.3V, TX, RX, GND / 115200 8N1 MAC addresses as verified by OEM firmware: use address source LAN *:c5 art 0x0 (label) WAN *:c6 label + 1 WLAN *:c7 art 0x1002 Installation via U-Boot rescue: 1. Press and hold reset and power buttons simultaneously 2. Wait for the LAN led to blink 5 times 3. Release reset and power buttons 4. The rescue page is accessible via http://192.168.1.1 5. Select the OpenWrt factory image and start upgrade 6. Wait for the router to flash new firmware and reboot Revert to stock firmware: i. Download the stock firmware from GL.Inet website ii. Use the same method explained above to flash the stock firmware Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr> [update commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: correct vendor name for COMFAST/JoowinRodrigo Araujo2022-01-227-44/+50
| | | | | | | | | | | | | | | | When Joowin WR758AC V1 and V2 devices were added, they should have been added with the primary manufacturer name which is COMFAST, since Joowin is just an alternate vendor name on some coutries or stores. Fix this by changing the the vendor name on the respective files and set Joowin as ALT0 variants while ensuring compatibility for early users. Also adjust the model names to better follow the naming rules. As a side effect, fix mt76x8 network script which was left incorrectly unsorted on the case block conditions. Fixes: 766733e172 ("ramips: add support for Joowin WR758AC V1 and V2") Signed-off-by: Rodrigo Araujo <araujo.rm@gmail.com>
* ramips: read Tenbay T-MB5EU address from single locationDavid Bauer2022-01-221-5/+2
| | | | | | | | | | | | | Currently the WAN MAC address is read from a different offset contrary to all other addresses. There's conflicting information whether offset 0x28 on the factory partition contains the valid WAN mac for all devices while 0x4 seems to be uniform. Read the WAN mac from this location and calculate it. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: update Tenbay T-MB5EU wireless MAC addressDavid Bauer2022-01-221-2/+1
| | | | | | | | | | | | | | The current MAC address assignment is still incorrect. Use the same MAC address as seen on the stock firmware for both wireless interfaces. The 5GHz MAC address OUI is +2 in the first EUI octet. We currently don't do this in OpenWrt. Ignore this offset for now. With the current assignment, recurring MAC addresses between radios is already taken care of. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: Netgear D7800: Fix RAM and enable PCIe #2David Woodhouse2022-01-211-1/+15
| | | | | | | This board has 512MiB of RAM like the R7800, and the VDSL modem is attached to the second PCIe port. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 13:08:47 +0000