aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ath79: image: disable sysupgrade images for routerstations and ja76pf2Tomasz Maciej Nowak2019-09-012-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Because a bug in handling partial erase blocks in 4.19 kernel, using sysupgrade images will hard brick devices that use RedBoot bootloader and have "FIS directory" with "RedBoot config" on the same erase block. Since flashing the devices from bootloader is safe, and to not cause a situation where external chip programmer or JTAG is needed, disable sysupgrade images for affected boards while creating kernel.bin and rootfs.bin for jjPlus JA76PF2 board, which doesn't have factory image. To set up the JA76PF2 board follow "Installation" instructions in b3a0c97 ("ath79: add support for jjPlus JA76PF2") except the part of loading initramfs image and using sysupgrade image for flashing (point 6 and 7). Enter following commands to flash the board from bootloader: fis init load -r -b 0x80060000 <openwrt_kernel_image_name> fis create linux load -r -b %{FREEMEMLO} <openwrt_rootfs_image_name> fis create rootfs fis load -l linux exec -c "" For RouterStations use TFTP recovery procedure. Ref: FS#2428 Cc: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: fix FIS partition detection for 4.19 kernelTomasz Maciej Nowak2019-09-011-0/+44
| | | | | | | | | When bumping to 4.19 the patch responsible for scaning flash for FIS partition got left out. Without it devices with RedBoot bootloader using automatic partitions detection in dts won't boot with the new kernel. Fixes: 3771176 ("ath79: add support for linux 4.19") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: image: add supported string for routerstations and ja76pf2Tomasz Maciej Nowak2019-09-012-0/+3
| | | | | | | | | Now that the md5 check is fixed and metadata present, sysupgrade on ar71xx will complain about device not being supported by the image. Since the cause is not matching strings for supported devices add them accordingly. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: image: append metadata to routerstations and ja76pf2 imagesTomasz Maciej Nowak2019-09-012-2/+2
| | | | | | | | This target enforces metadata check so add the necessary information. It was previously removed because md5 sum check. When using these sysupgrade images on ar71xx target the check would complain about them not matching. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ar71xx: sysupgrade: accept ath79 combined-imageTomasz Maciej Nowak2019-09-011-1/+1
| | | | | | | | | | There is md5 sum of whole image embedded in combined-image header which is checked on sysupgrade. The check will fail for ath79 images which may have embedded metadata. This is because metadata are appended after the combined image is created. To allow smooth transition from ar71xx to ath79, strip metadata before calculating md5 sum for whole image. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: image: retire combined-image for Adtran/Bluesocket devicesTomasz Maciej Nowak2019-09-011-1/+1
| | | | | | | | | | | | During review it slipped by that these devices use combined-image which should never be used for newly added ones. Therefore switch to sysupgrade-tar generated images introduced in 8f6f260 ("ath79: routerstation: prepare to use sysupgrade-tar format image"). The sysupgrade accepts both images for now so no reression should occur. Cc: Brian Gonyer <bgonyer@gmail.com> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: dts: fix ja76pf2 spi frequencyTomasz Maciej Nowak2019-09-011-1/+1
| | | | | | | | | | | The frequency was filled acording the information from datasheet for particular chip (Winbond 25Q128BVFG). Unfortunately this led to coruption and introduced bad blocks on the chip. Reducing the frequency to commonly used in ath79, made the board more stable and no new bad blocks were spoted. Fixes: b3a0c97 ("ath79: add support for jjPlus JA76PF2") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ath79: correct OCEDO Ursus phy-mode propertyDavid Bauer2019-08-311-1/+3
| | | | | | | | | This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0. See 62abbd587dc9 ("ath79: correct various phy-mode properties") for more details. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: Replace backticks by $(...)Adrian Schmutzler2019-08-312-4/+4
| | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: WNR2200: remove redundant GPIO for WLAN LEDMichal Cieslakiewicz2019-08-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Without this patch, an extra entry appears for AR9287 GPIO that duplicates WLAN LED but in fact drives nothing: gpiochip1: GPIOs 502-511, ath9k-phy0: gpio-502 ( |netgear:blue:wlan ) out hi gpio-503 ( |netgear:amber:test ) out hi gpio-504 ( |netgear:green:power ) out lo gpio-505 ( |rfkill ) in hi gpio-507 ( |wps ) in hi gpio-508 ( |reset ) in hi gpio-510 ( |ath9k-phy0 ) out hi <===! The pin pointed above is default LED GPIO (8) for AR9287. For WNR2200 it is not connected anywhere - pin 0 drives blue WLAN LED instead - but initialization code is missing that information. This fix calls ap9x_pci_setup_wmac_led_pin() function at device setup, forcing WLAN LED pin to be 0 and removing redundant entry. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: etactica-eg200: fix restore buttonKarl Pálsson2019-08-311-1/+1
| | | | | | | | | The button is labelled reboot/restore in documentation, and has always been used for that. Naming it WPS has always been wrong. Signed-off-by: Karl Pálsson <karlp@etactica.com> [matched author to SoB] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: add support for Netgear R6260 and R6850Christoph Krapp2019-08-318-146/+251
| | | | | | | | | | | As Netgear uses the same image for R6260, R6350 & R6850 we can merge device tree files and generate separate images for each device. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [add missing WiFi compatible string, fix network configuration] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add factory image for Netgear R6350Christoph Krapp2019-08-311-1/+6
| | | | | | | | | | | | This adds factory image generation for all three devices. These images can be flashed via WebUI for easy installation. Thanks to David Bauer for the inspiration. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [altered commit to only include the R6350] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add mt7615e support to Netgear R6350Christoph Krapp2019-08-312-1/+10
| | | | Signed-off-by: Christoph Krapp <achterin@googlemail.com>
* ramips: fix network setup for various NETGEAR boardsDavid Bauer2019-08-311-11/+6
| | | | | | | | | | | | | | | | There are currently the following issues present for the Netgear R6220, R6350 and WNDR3700 v5: - LAN and WAN MAC-addresses are inverted - WAN MAC-address is off. It are +2 compared to the LAN MAC-address (R6350 only) - Switchport order is inverted in LuCi This commit fixes both these issues by assigning correct MAC-addresses to LAN and WAN interfaces and defining the switchports with the correct labels. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: use phy trigger for various Netgear boardsDavid Bauer2019-08-313-1/+2
| | | | | | | | | This commit switches the default trigger for the WiFi LED from a netdev trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED to work, even when the wireless interface is not named "wlan0" without modifiying the LED settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add factory image for NETGEAR R6220David Bauer2019-08-311-1/+6
| | | | | | | | | | This adds an easy-installation factory image for the NETGEAR R6220 router. The factory image can either be flashed via the vendor Web-UI or the bootloader using nmrpflash. Tested with NETGEAR V1.1.0.86 firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: disable badblock shifting for MT7621 NANDDavid Bauer2019-08-311-1/+1
| | | | | | | | | | | | | | | | | The MediaTek MT7621 NAND driver currently intransparently shifts NAND pages when a block is marked as bad. Because of this, offsets for e.g. caldata and MAC-addresses seem to be off. This is, howeer, not a task for the mtd NAND driver, as the flash translation layer is tasked with this. This patch disables this badblock shifting. This fix was originally proposed by Jo-Philipp Wich at https://bugs.openwrt.org/index.php?do=details&task_id=1926 Fixes FS#1926 ("MTD partition offset not correctly mapped when bad eraseblocks present") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 4.19 to 4.19.69Koen Vandeputte2019-08-304-10/+8
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.141Koen Vandeputte2019-08-301-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mediatek: backport a pcie fixJohn Crispin2019-08-301-0/+534
| | | | | | PCI/e probe was failing under certain situations. Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: sysupgrade: fix uDPU eMMC check regressionVladimir Vid2019-08-291-23/+27
| | | | | | Add udpu_ prefix in all other function names Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* brcm2708: remove duplicated patchÁlvaro Fernández Rojas2019-08-291-10/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add disable_eap_hack sysfs attributeEtienne Champetier2019-08-283-12/+165
| | | | | | | We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed as a first step, add disable_eap_hack sysfs config to allow to disable it Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* mediatek: update v4.19 switch support to latest vendor versionJohn Crispin2019-08-2818-641/+726
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: bump 4.19 to 4.19.68Koen Vandeputte2019-08-284-74/+11
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 950-0307-Revert-pwm-Set-class-for-exported-channels-in-sysfs.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.140Koen Vandeputte2019-08-282-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.190Koen Vandeputte2019-08-284-6/+6
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3900 Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm2708: fix DMA leaks in bcm2835-mmcÁlvaro Fernández Rojas2019-08-272-0/+79
| | | | | | Add patches from https://github.com/raspberrypi/linux/pull/3164 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update to latest patches from RPi foundationÁlvaro Fernández Rojas2019-08-271193-59093/+64679
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx/ath79: ag71xx: dont fetch the same var againKoen Vandeputte2019-08-272-2/+2
| | | | | | | tx_size was just declared above and set to BIT(tx->order) Use the declaration instead, which could avoid a pointer deref Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: use base address value directly from the sourceKoen Vandeputte2019-08-271-2/+2
| | | | | | This brings the code more inline with the ath79 flavour Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: make use of managed dev API simplifying codeKoen Vandeputte2019-08-271-51/+34
| | | | | | | | | Backport of a4eef43a120d ("ath79: ag71xx: replace alloc_etherdev with devm_alloc_etherdev") combined with the initial changes from John Crispin. Simplifies the code a lot by using the Managed dev API. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: replace ag71xx_get_phy_if_mode_name with phy_modes()Koen Vandeputte2019-08-271-22/+1
| | | | | | Backport of f73b2d64ed56 ("ath79: ag71xx: replace ag71xx_get_phy_if_mode_name() with phy_modes()") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: pass correct device pointer to dmaKoen Vandeputte2019-08-271-7/+7
| | | | | | | | | Backport of 4eaa3626a821 ("ath79: ag71xx: pass correct device pointer to dma functions") While 4.14 does not contain the warnings, it still makes sense to use the proper pointers here. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: ag71xx: get ring_mask consistentKoen Vandeputte2019-08-272-2/+2
| | | | | | | | | All other instances of this identical declaration fetch the value directly from the ring_order. Also do it here. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: ag71xx: add missing register writesKoen Vandeputte2019-08-271-0/+5
| | | | | | These are added in ath79, but were not backported here Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.67Koen Vandeputte2019-08-276-4/+8
| | | | | | | | | | | | Refreshed all patches. Also add a missing symbol for x86 which got used now in this bump. - ISCSI_IBFT Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.139Koen Vandeputte2019-08-275-1/+5
| | | | | | | | | | | | Refreshed all patches. Also add a missing symbol for x86 which got used now in this bump. - ISCSI_IBFT Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: move crypto-arc4 into a moduleFelix Fietkau2019-08-263-3/+3
| | | | | | It is no longer required by wireless drivers, so we can save some space here Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: drop unreachable ipq-wifi package for the AP120C-ACChristian Lamparter2019-08-241-1/+1
| | | | | | | | | | | | | Harri Hursti reported that ALFA Network AP120C-AC does not work anymore due to: "Unknown package 'ipq-wifi-alfa-network_ap120c-ac'." This patch fixes the issue by removing the stale package from the device's dependencies as the calibration data is now provided by the upstream board-2.bin. Reported-by: Harri Hursti <harri@nordicinnovationlabs.com> Fixes: 8f757d427cce ("ipq-wifi: drop upstreamed custom board-2.bin") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: add NAS goodies on U25AWF-H1 + U35[N|W]FChristian Lamparter2019-08-241-2/+4
| | | | | | | | | These devices are sold as a "NAS HDD Enclousure" and have a "NAS Media Streaming & File Server & AP" on the box. That's why I think they should have some support for the HDD right out-of-the-box. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: refresh patchesLuka Perkov2019-08-246-13/+8
| | | | Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
* mvebu: uDPU: add sysupgrade supportVladimir Vid2019-08-247-4/+261
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds sysupgrade, uboot-env and networking support for Methode uDPU device. Device features 4 partitions: ----------------------------------------- | boot | recovery | rootfs | misc | | (ext4) | (ext4) | (fsf2) | (f2fs) | _________________________________________ Idea was to use f2fs only but the u-boot currently lacks support so first 2 partition are ext4 to be u-boot readable, and this was a reason why custom build and sysupgrade sections were required. On the sysupgrade, boot and rootfs partitions are updated, firmare image and user configuration is saved on the misc partition and if the upgrade was successfull, recovery partition will be updated on after the reboot from preinit script. If the sysupgrade fails for any reason, device will fallback to recovery initramfs image. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* kernel: 4.19: backport mx25u12835f support from linux 5.0Vladimir Vid2019-08-241-0/+30
| | | | Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* ath79: add support for gl-ar750Luochongjun2019-08-244-0/+158
| | | | | | | | | | | | | | | | | | | | This patch supports gl-ar750, which was previously supported by ar71xx. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 2xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Switch: 1x switch - Button: 1x reset button - LED: 3x LEDS (white) Flash instruction: Support for sysupgrade directive upgrades, as well as luci upgrades. Signed-off-by: Luochongjun <luochongjun@gl-inet.com>
* ramips: add support for ADSLR G7Zhenjian Zhang2019-08-243-0/+128
| | | | | | | | | | | | | | | | | | | SoC: MT7621AT RAM: 256MB Flash: 16M SPI Ethernet: 5x GE ports WiFi: 2.4G: MT7615N 5G: MT7615N Flash instruction: 1.Modify the file to linux.bin 2.Set up FTP service 3.Computer settings fixed IP: 192.168.179.50 255.255.255.0 4.Turn on the power and press and hold the reset button until the indicator light is on for about 5 seconds. Signed-off-by: Zhenjian Zhang <itdesk.zhang@gmail.com> [fix mac location] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ipqx0xx: add Generic subtargetPaul Spooren2019-08-224-0/+4
| | | | | | | | | | | | | | | | | | Both targets miss a subtarget causing an image naming style which is different from other all othe targets, even tho it already uses `x/generic/` as subfolder as if the subtarget would exist. This commit adds the Generic subtarget resulting in consistent naming. ~/src/openwrt/openwrt/bin/targets/ipq806x/generic$ ls openwrt-ipq806x-generic-netgear_d7800-initramfs-uImage openwrt-ipq806x-generic-netgear-d7800.manifest openwrt-ipq806x-generic-netgear_d7800-squashfs-factory.img openwrt-ipq806x-generic-netgear_d7800-squashfs-sysupgrade.bin CC: John Crispin <john@phrozen.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* lantiq: add device alias for Alpha ASL56026Daniel Golle2019-08-221-2/+4
| | | | | | | | BT Openreach ECI VDSL Modem V-2FUb/I is an alias of Alpha ASL56026 as also stated in the original commit message adding the device (commit 6254a2028c "lantiq: add support for the Alpha ASL56026"). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: sort device definitions in image/MakefileAdrian Schmutzler2019-08-221-344/+343
| | | | | | | | | This sorts the device definitions in image/Makefile alphabetically for each subtarget/block. The order of blocks has not been touched. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>