aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: dts: Unify naming of gpio-led nodesPetr Štetiar2019-02-0579-79/+79
| | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
* brcm63xx: dts: Unify naming of gpio-keys nodesPetr Štetiar2019-02-0569-69/+69
| | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
* kernel: bump 4.19 to 4.19.19Koen Vandeputte2019-02-015-93/+5
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed patch: - 800-v5.0-usb-leds-fix-regression-in-usbport-led-trigger.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.97Koen Vandeputte2019-02-0111-29/+31
| | | | | | | | | | | | Refreshed all patches. Adapted patches: - 012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.154Koen Vandeputte2019-02-017-14/+16
| | | | | | | | | | | | Refreshed all patches. Adapted patches: - 012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: add first DTS changes queued for the Linux 5.1Rafał Miłecki2019-02-016-60/+154
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: rb750gr3: License DTS as GPL-2.0-or-later OR MITAnton Arapov2019-02-011-0/+1
| | | | | | | | | | | | | Adding license in order to fully satisfy dts checklist: - https://openwrt.org/submitting-patches#dts_checklist Signed-off-by: Anton Arapov <arapov@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Thibaut <hacks@slashdirt.org> Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com> Acked-by: Chuanhong Guo <gch981213@gmail.com> Acked-by: Andrew Yong <me@ndoo.sg> Acked-by: Alex Maclean <monkeh@monkeh.net>
* ramips: fix D-Link DIR-615 H1 switch port mappingMirko Parthey2019-01-301-0/+1
| | | | | | | Reuse a device-specific switch port mapping which also applies to the D-Link DIR-615 H1. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* ar71xx: fix packed-not-aligned error with GCC 8.Jo-Philipp Wich2019-01-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | Building ar71xx currently fails with: In file included from ./include/linux/ipv6.h:5, from ./include/net/ipv6.h:16, from ./include/net/inetpeer.h:16, from ./include/net/ip_fib.h:24, from ./include/net/switchdev.h:17, from ./include/net/dsa.h:23, from arch/mips/ath79/dev-dsa.h:15, from arch/mips/ath79/dev-dsa.c:17: ./include/uapi/linux/ipv6.h:107:1: error: alignment 1 of 'struct ipv6_destopt_hao' is less than 2 [-Werror=packed-not-aligned] } __attribute__((packed)); Address this issue by correcting the alignment of the struct packing pragma accordingly. Fixes: FS#1805 Reported-by: Pascal Ernster <git@hardfalcon.net> [reword subject, rewrap commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: use correct wan mac address for the TP-Link Archer C7 v4David Santamaría Rogado2019-01-301-7/+11
| | | | | | | | | | | | The correct MAC address for this device is lan_mac +1, there is no need to set lan_mac so use base_mac variable instead lan_mac. Based on this PR for ath79: https://github.com/openwrt/openwrt/pull/1726 Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com> [fix alphabetical ordering, reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: move wifi related interrupts off the main core on SMP systemsFelix Fietkau2019-01-291-0/+31
| | | | | | Improves LAN<->WLAN bridging/routing performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Add missing config option for kernel 4.14Hauke Mehrtens2019-01-281-0/+1
| | | | | | | | | | | | | Kernel 4.14.96 got the new configuration option CIFS_ALLOW_INSECURE_LEGACY which allows to deactivate support for old and insecure SMB versions like 1.0 and 2.0. Still allow these old SMB version and fix build problems which occurred because this option was not defined. This was found by build bot. Fixes: 3662157d8bed ("kernel: bump 4.14 to 4.14.96") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: add support for kernel 4.19Koen Vandeputte2019-01-282-0/+541
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.18Koen Vandeputte2019-01-2833-384/+58
| | | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 031-v5.0-MIPS-BCM47XX-Setup-struct-device-for-the-SoC.patch - 142-jffs2-Fix-use-of-uninitialized-delayed_work-lockdep-.patch Removed upstreamed hunk in: - 800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: don't use invalid mask value for clock eventsKoen Vandeputte2019-01-281-2/+4
| | | | | | | | | | | | | According to a commit from kernel 4.18-rc3, it's not valid to use "cpu_mask_all" for clock events and it should be replaced in favor of "cpu_possible_mask" [1] This warning was seen when booting kernel 4.19 on a cns3xxx board. Let's fix it also here just to be safe. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.19.18&id=fbfa9260085b5b578a049a90135e5c51928c5f7f Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: add support for kernel 4.19Koen Vandeputte2019-01-2825-0/+1562
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: use actual size reads for PCIe (4.19)Koen Vandeputte2019-01-281-0/+46
| | | | | | | | | | | | | | | | | | | | | upstream commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(), which preserved the property of only doing 32-bit reads. It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(), so it changed writes from always being 32 bits to being the actual size, which works just fine. Due to: - The documentation does not mention that only 32 bit access is allowed. - Writes are already executed using the actual size - Extensive testing shows that 8b, 16b and 32b reads work as intended It makes perfectly sense to also swap 32 bit reading in favor of actual size. also backport this patch to kernel 4.19 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: refresh kernel configKoen Vandeputte2019-01-281-3/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.96Koen Vandeputte2019-01-2819-114/+26
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed patches: - 142-jffs2-Fix-use-of-uninitialized-delayed_work-lockdep-.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.153Koen Vandeputte2019-01-2811-16/+16
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.133Koen Vandeputte2019-01-288-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm2708: Fix kmod-regmap splitHauke Mehrtens2019-01-271-17/+34
| | | | | | | There are more regmap dependencies missing in the brcm2708 target. Fixes: fd5c16870169 ("kernel: Build: Split kmod-regmap") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for TP-Link Archer C2 V3 (AC900)Skirmantas Lauzikas2019-01-275-7/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the TP-link Archer C2 V3 (AC900). Specifications: - CPU: QCA9563 750Mhz - Ram: 64MB (DDR2) - Flash: 8MB (SPI NOR) - Ethernet: 5x 10/100/1000 - Wifi: QCA9563 bgn + QCA9887 an+ac - 9x Leds, 2x buttons Flash instructions: Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin via the router Web interface and flash as normal firmware update. Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt> [reorder entries, fix trailing whitespace in dts, add firmware partition compatible string, remove led default off states, use default on state for system led, reuse tplink-safeloader-uimage image build recipe, squash with dynamic partitioning commit, reword commit message, add installation instructions] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm63xx: VH4032N: add missing pinctrlDaniel Gonzalez Cabanelas2019-01-271-0/+4
| | | | | | | | Add missing pin controls for the Observa VH4032N router. This fixes the wifi radio and ethernet LAN LEDs. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: VH4032N: fix the power led and the wlan buttonDaniel Gonzalez Cabanelas2019-01-272-5/+5
| | | | | | | | - use the blue LED for power, since the red LED is already used by CFE in emergency mode. - use the correct code for the wlan button Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm2708: Move kmod-sound-soc-3dlab-nano-player to sound modulesHauke Mehrtens2019-01-271-0/+1
| | | | | | | kmod-sound-soc-3dlab-nano-player was in the global kernel menu before, add the dependency to sound to move it to the correct category. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix kmod-regmap splitHauke Mehrtens2019-01-272-2/+3
| | | | | | | | Two regmap dependencies were wrong, this patch fixes them. This was detected by the build bots. Fixes: fd5c16870169 ("kernel: Build: Split kmod-regmap") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq/led_dsl: Fix netdev led triggerMartin Schiller2019-01-271-1/+3
| | | | | | | | | | | In the upstream netdev led trigger the one mode file was replaced by 3 files named rx, tx and link. Fix the netdev trigger configuration code to use the modified API. This fix is based on 201058b35ce ("base-files: Fix netdev led trigger") Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* sunxi: Add support for SY8106A voltage regulatorDaniel Engberg2019-01-272-1/+1
| | | | | | | | | Add support for Silergy SY8106A voltage regulator which is needed for cpufreq support on boards such as Orange Pi PC Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Remove CONFIG_REGULATOR_SY8106A from cortexa7] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: backport upstream fixes for armada 37xxTomasz Maciej Nowak2019-01-273-0/+158
| | | | | | | Upstream patches for processor frequency scaling, which fix possible system hard lockups. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: espressobin: correct spi node in dtsTomasz Maciej Nowak2019-01-272-8/+77
| | | | | | | | Drop customizations in: 508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch and move them to separate patch, with broader explanation. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: sort armada 37xx upstream patches chronologicallyTomasz Maciej Nowak2019-01-279-0/+0
| | | | Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: move HARDEN_BRANCH_PREDICTOR to common configTomasz Maciej Nowak2019-01-274-3/+1
| | | | | | | | This symbol is enabled in all subtargets, move it to common kernel config. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Acked-by: Rosen Penev <rosenp@gmail.com>
* kernel: Build: Split kmod-regmapHauke Mehrtens2019-01-277-42/+25
| | | | | | | | | | | | | | | | | | | | | | | This reduces the needed modifications to the mainline Linux kernel and also makes the regmap package work with an out of tree kernel which does not have these modifications. The regmap-core is only added when it is really build as a module. The regmap-core is normally bool so it cannot be built as a module in an unmodified kernel. When it is selected by on other kernel module it will always be selected as build in and it also does not show up in $(LINUX_DIR)/modules.builtin as it is not supposed to be a kernel module. When it is not in $(LINUX_DIR)/modules.builtin the build system expects it to be built as a .ko file. Just check if the module is really there and only add it in that case. This splits the regmap package into multiple packages, one for each bus type. This way only the bus maps which are really needed have to be added. This also splits the I2C, SPI and MMIO regmap into separate packages to not require all these subsystems to build them, on an unmodified upstream kernel this also causes problems in some situations. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* sunxi: spi flash dts changesOskari Lemmela2019-01-264-0/+226
| | | | | | | | Backport A64 SPI flash DTS changes to 4.14 kernel. Add Openwrt specific flash partitions to Sopine. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* sunxi: add spi flash support to kernelOskari Lemmela2019-01-262-2/+16
| | | | | | | Some of sunxi devices have onboard SPI flash. Enable SPI NOR support and MTD fit split in kernel config. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* sunxi: add a64 watchdog supportOskari Lemmela2019-01-261-0/+54
| | | | | | Backport A64 watchdog DTS change to 4.14 kernel. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* ath79: add support for Devolo WiFi Pro 1750eDjango Armstrong2019-01-264-1/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3) WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3) BTN: 1x Reset 1x WPS 1x USB eject LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports) Dupont 4 pin header Rear RJ45 serial port non-functional USB: 1x v2.0 Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password previously set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: Django Armstrong <iamdjango@hotmail.com>
* ramips: rt3883: drop jimage supportMathias Kresin2019-01-261-1/+0
| | | | | | The splitter isn't required by any of the boards in the subtarget. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: disable CONFIG_MTD_SPLIT_FIRMWAREMathias Kresin2019-01-265-5/+0
| | | | | | | It's no longer needed as all mt7621 devices use DT binding (supported by upstream mtd code) for specifying "firmware" part format explicitly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: specify "firmware" partition format for remaining devicesRafał Miłecki2019-01-263-0/+3
| | | | | | | | | It results in calling the right MTD parser directly instead of trying them one by one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [use the lzma splitter for the AR670W] Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: Add a config for kernel v4.19Linus Walleij2019-01-261-0/+495
| | | | | | | This adds a config for kernel v4.19 to the Gemini target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Add v4.19 kernel patchesLinus Walleij2019-01-2618-0/+1631
| | | | | | | | | | This is the remainder of kernel patches for the v4.19 kernel. A whole slew of the previous patch stack is now upstream, so this mainly contains the stuff that was added upstream between v4.19 and v5.0-rc1, and then the USB FOTG201 patches from Hans. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ramips: add support for Archer C50 v4David Bauer2019-01-266-1/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the TP-Link Archer C50 v4. It uses the same hardware as the v3 variant, sharing the same FCC-ID. CPU: MediaTek MT7628 (580MHz) RAM: 64M DDR2 FLASH: 8M SPI WiFi: 2.4GHz 2x2 MT7628 b/g/n integrated WiFI: 5GHz 2x2 MT7612 a/n/ac ETH: 1x WAN 4x LAN LED: Power, WiFi2, WiFi5, LAN, WAN, WPS BTN: WPS/WiFi, RESET UART: Near ETH ports, 115200 8n1, TP-Link pinout Create Factory image -------------------- As all installation methods require a U-Boot to be integrated into the Image (and we do not ship one with the image) we are not able to create an image in the OpenWRT build-process. Download a TP-Link image from their Wesite and a OpenWRT sysupgrade image for the device and build yourself a factory image like following: TP-Link image: tpl.bin OpenWRT sysupgrade image: owrt.bin > dd if=tpl.bin of=boot.bin bs=131584 count=1 > cat owrt.bin >> boot.bin Installing via Web-UI --------------------- Upload the boot.bin via TP-Links firmware upgrade tool in the web-interface. Installing via Recovery ----------------------- Activate Web-Recovery by beginning the upgrade Process with a Firmware-Image from TP-Link. After starting the Firmware Upgrade, wait ~3 seconds (When update status is switching to 0%), then disconnect the power supply from the device. Upgrade flag (which activates Web-Recovery) is written before the OS-image is touched and removed after write is succesfull, so this procedure should be safe. Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1. When active, all LEDs but the WPS LED are off. Remeber to assign yourself a static IP-address as DHCP is not active in this mode. The boot.bin can now be uploaded and flashed using the web-recovery. Installing via TFTP ------------------- Prepare an image like following (Filenames from factory image steps apply here) > dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1 > dd if=tpl.bin of=tmp.bin bs=131584 count=1 > dd if=tmp.bin of=boot.bin bs=512 skip=1 > cat boot.bin >> tp_recovery.bin > cat owrt.bin >> tp_recovery.bin Place tp_recovery.bin in root directory of TFTP server and listen on 192.168.0.66/24. Connect router LAN ports with your computer and power up the router while pressing the reset button. The router will download the image via tftp and after ~1 Minute reboot into OpenWRT. U-Boot CLI ---------- U-Boot CLI can be activated by holding down '4' on bootup. Dual U-Boot ----------- This is the first TP-Link MediaTek device to feature a split-uboot design. The first (factory-uboot) provides recovery via TFTP and HTTP, jumping straight into the second (firmware-uboot) if no recovery needs to be performed. The firmware-uboot unpacks and executed the kernel. Web-Recovery ------------ TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 / TL-WR1043v5. Stock-firmware sets a flag in the "romfile" partition before beginning to write and removes it afterwards. If the router boots with this flag set, bootloader will automatically start Web-recovery and listens on 192.168.0.1. This way, the vendor-firmware or an OpenWRT factory image can be written. By doing the same while performing sysupgrade, we can take advantage of the Web-recovery in OpenWRT. It is important to note that Web-Recovery is only based on this flag. It can't detect e.g. a crashing kernel or other means. Once activated it won't boot the OS before a recovery action (either via TFTP or HTTP) is performed. This recovery-mode is indicated by an illuminated WPS-LED on boot. Signed-off-by: David Bauer <mail@david-bauer.net>
* gemini: dlink-dir-685: fix rt2800-pci package nameChristian Lamparter2019-01-261-1/+1
| | | | | | The package is now called kmod-rt2800-pci. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Linksys EA6350v3Oever González2019-01-2610-2/+734
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4018 RAM: 256 MiB Samsung K4B2G1646F-BYK0 FLASH1: MX25L1605D 2 MB FLASH2: Winbond W25N01GV 128Mb ETH: Qualcomm QCA8075 WLAN0: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN1: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: WPS, Reset LED: Status - Green SERIAL: Header at J19, Beneath DC Power Jack 1-VCC ; 2-TX ; 3-RX; 4-GND; Serial 115200-8-N-1. Tested and working: - USB (requires extra packages) - LAN Ethernet (Correct MAC-address) - WAN Ethernet (Correct MAC-address) - 2.4 GHz WiFi (Correct MAC-address) - 5 GHz WiFi (Correct MAC-address) - Factory installation from Web UI - OpenWRT sysupgrade - LED - Reset Button Need Testing: - WPS button Install via Web UI: - Attach to a LAN port on the router. - Connect to the Linksys Smart WiFi Page (default 192.168.1.1) and login - Select the connectivity tab on the left - In the manual update box on the right - Select browse, and browse to openwrt-ipq40xx-linksys_ea6350v3-squashfs-factory.bin - Click update. - Read and accept the warning - The router LED will start blinking. When the router LED goes solid, you can now navigate to 192.168.1.1 to your new OpenWrt installation. Sysupgrade: - Flash the sysupgrade image as usual. Please: try to do a reset everytime you can (doing it with LuCI is easy and can be done in the same step). Recovery (Automatic): - If the device fails to boot after install or upgrade, whilst the unit is turned on: 1 - Wait 15 seconds 2 - Switch Off and Wait 10 seconds 3 - Switch on 4 - Repeat steps 1 to 3, 3 times then go to 5. 5 - U-boot will have now erased the failed update and switched back to the last working firmware - you should be able to access your router on LAN. Recovery (Manual): - The steps for manual recovery are the same as the generic u-boot tftp client method. Back To Stock: - Use the generic recovery using the tftp client method to flash the "civic.img". Also you can strip-and-pad the original image and use the generic "mtd" method by flashing over the "kernel" partition. * Just be careful to flash in the partition that the device is currently booted. Signed-off-by: Ryan Pannell <ryan@osukl.com> Signed-off-by: Oever González <notengobattery@gmail.com> [minor edits, removed second compatible of nand, added dtb entry to 4.19] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: dts: Unify naming of gpio-led nodesPetr Štetiar2019-01-268-8/+8
| | | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> [split up, removed entries where it could clash due to ath9k-leds] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: dts: Unify naming of gpio-keys nodesPetr Štetiar2019-01-2613-13/+13
| | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
* ramips: fix support for MX25L25635F flashDeng Qingfang2019-01-264-6/+80
| | | | | | | | | | | | | | | | | | | Patch picked from commit 82618062cf7e This enables 4B opcodes for MX25L25635F, to fix the reboot crash issue (FS#1120) At least 3 devices are using this flash - GeHua GHL-R-001 - Youku YK1 - Newifi D1 Now the MX25L25635F can be correctly detected without breaking MX25L25635E [ 3.034324] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 3.045962] m25p80 spi0.0: mx25l25635f (32768 Kbytes) [ 3.056098] 4 fixed-partitions partitions found on MTD device spi0.0 [ 3.068748] Creating 4 MTD partitions on "spi0.0": Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added deprecation notice]
* mpc85xx: add support for OCEDO PandaDavid Bauer2019-01-2611-0/+472
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU: FSL P1020 (2x 800MHz E500 PPC) RAM: 1GB DDR3 FLASH: 256MiB NAND WiFi: 2x Atheros AR9382 2x2:2 abgn ETH: 2x BCM54616S - 1x BCM53128 8-port switch LED: 5x LEDs (Power, WiFi1, WiFi2, N/D, SYS) BTN: 1x RESET Installation ------------ 1. Download initrams kernel image, dtb binary and sysupgrade image. 2. Place initramfs kernel into tftp root directory. Rename to "panda-uimage-factory". 3. Place dtb binary into tftp root directory. Rename to "panda.fdt". 4. Start tftp server on 192.168.100.8/24. 5. Power up the device with the reset button pressed. It will download the initrams and dtb via tftp and boot into OpenWRT in RAM. 6. SSH into the device and remove the factory partitions. > ubirmvol /dev/ubi0 --name=kernel1 > ubirmvol /dev/ubi0 --name=rootfs1 > ubirmvol /dev/ubi0 --name=devicetree1 You will have around 60 MiB of free space with that. You can also delete "kernel2", "devicetree2", "rootfs2" and "storage" respectively in case you do not want to go back to the vendor firmware. 7. Modify the U-Boot bootcmd to allow for booting OpenWRT > fw_setenv bootcmd_owrt "ubi part ubi && ubi read 0x1000000 kernel && bootm 0x1000000" > fw_setenv bootargs_owrt "setenv bootargs console=ttyS0,115200 ubi.mtd=3,2048" > fw_setenv bootcmd "run bootargs_owrt; run bootcmd_owrt" 8. Transfer the sysupgrade image via scp into the /tmp directory. 9. Upgrade the device > sysupgrade -n /tmp/<imagename> Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 20:16:25 +0000