aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* x86_64: Add support for EFI framebuffer (FS#515)Alif M. Ahmad2017-02-211-1/+2
| | | | | | | | | | | | | | | CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on EFI framebuffer. CONFIG_FB_EFI is needed when the kernel is directly launched via EFI shell or EFI startup.nsh script. CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In this case, grub2 has prepared a gfxterm framebuffer and the kernel just need to use the already prepared grub's gfxterm framebuffer to display console text. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* bcm53xx: add kernel 4.9 configRafał Miłecki2017-02-201-0/+335
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix vlan settings for some boardsWeijie Gao2017-02-201-1/+1
| | | | | | | | | | | For AR71XX devices, GMAC1 always connects port 0 of the built-in switch, as the CPU port. This patch sets correct vlan for some devices with wrong settings: a) mark port 0 as CPU port, tagged b) reverse port order, marking these ports untagged Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* ar71xx: Add more boards to the routerboard serial detection patchThibaut VARENE2017-02-201-1/+3
| | | | | | This patch enables serial console on the 435 series and the 953gs. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for TL-WR802N Version 2Thomas Roberts2017-02-2012-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
* sdk: emit proper tag references for base URLsJo-Philipp Wich2017-02-191-3/+5
| | | | | | | | | Properly resolve symbolic tag names when constructing the base feed Git url and avoid emitting "HEAD" references when building from detached commits. Fixes #495, #501. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: fix warning if ltq_atm modules are missingMathias Kresin2017-02-181-2/+1
| | | | | | | | | Fixes the following warning on first boot if the ltq_atm modules are not included in the image: ls: /lib/modules/4.4.49/ltq_atm*: No such file or directory Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set the internet led interface according to wan interfaceMathias Kresin2017-02-181-0/+1
| | | | | | | | Use the nas0 interface for the netdev trigger as default. Use the ptm0 interface for xRX200 boards to match the default wan interface set in 02_network. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: introduce lantiq_is_vdsl_systemMathias Kresin2017-02-182-1/+5
| | | | | | | Move the code to check if the current system is a system with vdsl support to a dedicate function to make it reusable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV7519RW22 switch port indexingMathias Kresin2017-02-181-1/+1
| | | | | | Fixes FS#454. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: fix ethernet PLL configuration for QCA956xFelix Fietkau2017-02-171-1/+1
| | | | | | | QCA956x is configured like AR934x, not like the older chips. Should fix ethernet hangs when using the WAN port without SGMII Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix lan ports on archer C59 and C60Henryk Heisig2017-02-174-14/+39
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* x86: Add Geos profile for Geode subtargetDavid Woodhouse2017-02-173-0/+44
| | | | | | | | | | This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* ar71xx: add support for 8devices Lima boardKarol Dudek2017-02-1710-0/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lima is a module for the (IoE) internet of everything applications, based on Qualcomm/Atheros QCA4531. Specification: - 650/600/216 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 32 MB of FLASH - 2T2R 2.4 GHz - 2x 10/100 Mbps Ethernet - USB 2.0 Host - PCIe - UART for serial console - 14x GPIO Flash instruction: 1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin and rename it to 8dev_recovery.bin 2. Binary file copy to USB stick and plug into slot USB 3. Press S2 (reset) button 4. Press and hold the S1 button by 5 seconds 5. Wait ~40 seconds to complete recovery Tested on: - Lima development kit Signed-off-by: Karol Dudek <karoiz@sli.pl>
* mediatek: add more missing symbolsJohn Crispin2017-02-162-0/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add v4.9 supportJohn Crispin2017-02-1650-0/+11894
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add config file for v4.9John Crispin2017-02-161-0/+435
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: add linux 4.9 supportFelix Fietkau2017-02-1662-1/+9799
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-161-0/+1
| | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
* mediatek: bump to v4.9John Crispin2017-02-16110-27215/+136
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix the number of uarts for MT7688Furong Xu2017-02-162-4/+4
| | | | | | Same as MT7621 and MT7628, MT7688 allows up to 3 uarts Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: fix PWM pin mux conflict in dtsiFurong Xu2017-02-161-4/+0
| | | | | | | | | | | | | GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict [ 0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm [ 0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22 [ 0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0 on device rt2880-pinmux [ 0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back Keep PWM disabled. Signed-off-by: Furong Xu <xfr@outlook.com>
* kernel: update kernel 4.4 to version 4.4.49Hauke Mehrtens2017-02-163-47/+4
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to version 4.9.10Hauke Mehrtens2017-02-1622-135/+43
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: fix button inversion for Asus WL-500WMirko Parthey2017-02-161-0/+38
| | | | | | | | | The Asus WL-500W buttons are active high, but the software treats them as active low. Fix the inverted logic. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: fix USB driver choice for Asus WL-500WMirko Parthey2017-02-151-1/+1
| | | | | | | | | | | | | | | | BCM4704 SoC has only USB 1.1 core: ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243) but this device actually comes with two USB 2.0 ports. It appears embedded controller isn't used but instead there are two PCI attached controllers (next to the BCM4321 wireless card): 1106:3038 VT82xx/62xx UHCI USB 1.1 Controller 1106:3104 USB 2.0 Choose a set of USB drivers which actually support this hardware. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix crashes on MIPS when loading kernel modules under memory pressureFelix Fietkau2017-02-153-3/+12
| | | | | | | | | | | When memory is tight, modules may need to be loaded into vmalloc() space. The code then has to generate jump trampolines which enable relocations between vmalloc space and physical address space. The code had a bug that was freeing these trampolines even when the module was successfully loaded. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add preliminary kernel support for several RB SPI NOR devicesThibaut VARENE2017-02-153-0/+184
| | | | | | | | | | | | | | | | | | | The cAP 2nD, mAP 2nD and wAP 2nD apparently all share the same QCA953x/SPI-NOR platform. This patch adds preliminary kernel support based on init data used in Mikrotik's linux-3.3.5 kernel patch. Since this is totally experimental and untested, the necessary glue in base-files has not been added, the code is provided as a starting point in case somebody with that hardware wants to help getting it supported. The cAP lite (cAPL 2nD) should also be supported once it is determined whether or not it uses the same board identifier as the mAP lite. Code has been successfully built and has no side effect (no impact on already supported devices). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add new SPI NOR RB devices to the list of serial-enable patchThibaut VARENE2017-02-151-1/+5
| | | | Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for RB750r2Thibaut VARENE2017-02-157-4/+19
| | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD hEX lite https://routerboard.com/RB750r2 Specifications: - SoC: Qualcomm QCA9531 (850MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in) This ethernet router is based on the same platform as the hEX PoE lite (it shares the same board identifier), but has no USB and no PoE out. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for RB750UPr2Thibaut VARENE2017-02-159-19/+68
| | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD hEX PoE lite https://routerboard.com/RB750UPr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A This ethernet router is based on the same platform as the wireless router hAP. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for RB951Ui-2nDThibaut VARENE2017-02-159-1/+170
| | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD hAP https://routerboard.com/RB951Ui-2nD Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: provide support for RB-941-2nD via mach-rbspi.cThibaut VARENE2017-02-158-194/+44
| | | | | | | | | This patch implements support for the hAP lite in mach-rbspi.c hAP lite was supported via mach-rb941.c, so this file is removed as well as the corresponding build bits. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: add support for RB mAP L-2nDThibaut VARENE2017-02-1512-4/+313
| | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD mAP lite https://routerboard.com/RBmAPL-2nD Specifications: - SoC: Qualcomm QCA9533 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9533, 2x2:2 - Ethernet: 1x100M This is another 16M SPI NOR mikrotik device. The machine file is named mach-rbspi.c because I plan to add support for several of the other spi-based RouterBOARD devices in subsequent patches: they share most of the hardware and thus the same codebase. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: replace remaining instances of ralink, port-mapDaniel Golle2017-02-1511-11/+11
| | | | | | | | | | | | Some boards were apparently forgotten when ralink,portmap was renamed to mediatek,portmap -- probably because they used the long obsolete ralink,port-map attribute. If this commit breaks ethernet wan/lan assignment, this is because the port-map attribute wasn't actually parsed, you'll have to replace "wllll" by "llllw" in the dts file belonging to that board (and send a patch doing that!) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix mt7621 ethernet support for v4.9John Crispin2017-02-152-1/+8
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add missing symbol for v4.9John Crispin2017-02-151-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* x86: Add board configs for the PC Engines APU2Chris Blake2017-02-152-0/+8
| | | | | | | | This adds the default LED and network settings for the PC Engines APU2 when running under the x86 target. [dwmw2: Change Ethernet port setup] Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Enable DIAG LED on GeosDavid Woodhouse2017-02-152-1/+79
| | | | | | | | | Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's do it by using the LED configuration instead of hard-coding it for each board type. And try using /bin/board_detect to do the default behaviour, on the first boot where the config hasn't yet been generated. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* x86: Move Traverse Geos configs into x86 base-filesChris Blake2017-02-152-0/+0
| | | | | | | | | | This change moves the files in 657418d to the root of the x86 target. This is done in preperation for adding more devices under other subtargets. CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ramips: export slic IRQ line in dwr-512Giuseppe Lippolis2017-02-151-0/+4
| | | | | | | | The DWR-512 embeds the hw slic device si3210. This device have the IRQ line attached to the gpio1. This patch export the gpio1 with proper name and parameters to the sysfs. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* octeon: only copy sysupgrade file if presentJohn Crispin2017-02-151-1/+1
| | | | | | | | | | this caused 'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory' when running sysupgrade -n Signed-off-by: John Crispin <john@phrozen.org>
* octeon: bump to v4.9John Crispin2017-02-142-1/+297
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* build: add buildbot specific config option for setting defaultsFelix Fietkau2017-02-142-1/+3
| | | | | | | | | | This can be used to tweak the buildbot behavior without having to change buildbot's configuration. It will also allow us to add more aggressive clean steps (e.g. on toolchain changes), which would break developers' workflows if enable by default. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: revert faulty 4.4 config change from 9c242270907Felix Fietkau2017-02-141-9/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix DEFAULT_PACKAGES for mikrotik devicesFelix Fietkau2017-02-141-1/+2
| | | | | | Include packages from the default profile for NAND devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Add support for D-Link EBR-2310 Rev. CAlexandru Gagniuc2017-02-149-1/+22
| | | | | | | Add support for the EBR-2310, which is almost identical to the DIR-615 rev E4, without the wifi. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* ar71xx: add support for TP-Link TL-WA850RE v2Piotr Dymacz2017-02-1413-5/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/391/195 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x internal antennas (embedded on PCB) - 9x LED (all can be turned off with GPIO15), 2x button - UART (J3) header on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in US version of the device, but should work also with the same device version sold in other countries. Available FLASH space, with LEDE trunk, is only 240 KB. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: Clean duplicated status property for Omega2 WMAC in dtsiFurong Xu2017-02-141-4/+0
| | | | | | At the tail of dtsi, wmac is enabled twice, clean the first one Signed-off-by: Furong Xu <xfr@outlook.com>
* ramips: fixed sms led polarity into dwr-512 DTGiuseppe Lippolis2017-02-141-1/+1
| | | | Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>