aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* generic: remove brcmfmac-sdio.hBen Whitten2016-06-081-124/+0
| | | | | | This file is present in the kernel so no point overlaying it. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* treewide: replace jow@openwrt.org with jo@mein.ioJo-Philipp Wich2016-06-073-6/+6
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: add support for OpenEmbed SOM9331Allan Nick Pedrana2016-06-0712-0/+176
| | | | | | | | This patch adds the target profile SOM9331 and configures hardware functionality for the 3x Eth Ports & corresponding LED's, the USB Host, the USART to USB bridge and the System LED. Signed-off-by: Allan Nick Pedrana <nik9993@gmail.com>
* ixp4xx: fix Avila SoC audio driver compilationJo-Philipp Wich2016-06-071-1/+1
| | | | | | | | | | | | | | Upstream dropped the `dapm` member of `struct snd_soc_component`, requiring users to access it using `snd_soc_codec_get_dapm()` instead so change the driver code to do just that. Fixes the following build error spotted by the buildbots: CC [M] sound/soc/gw-avila/gw-avila.o sound/soc/gw-avila/gw-avila.c: In function 'avila_aic3x_init': sound/soc/gw-avila/gw-avila.c:104:44: error: 'struct snd_soc_codec' has no member named 'dapm' Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: fix image DEVICE_DTS handling, add proper default valueFelix Fietkau2016-06-072-31/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: only call Image/Prepare/Profile for defined profilesFelix Fietkau2016-06-071-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-07134-205/+205
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: convert OM2P to device profileFelix Fietkau2016-06-072-11/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: enable profile sorting in preparation for adding device profilesFelix Fietkau2016-06-075-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: install kernel binaries into bin/ for use with external storageFelix Fietkau2016-06-071-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: install kernel binaries into bin/ for use with external storageFelix Fietkau2016-06-071-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: lift generic x86-32 targetDaniel Golle2016-06-072-17/+136
| | | | | | | | | * build for pentium4 instead of i486 * enable PAE * enable EFI support * enable KVM guest and host support Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: reorganize x86_32 supportDaniel Golle2016-06-074-1/+238
| | | | | | copy current 'generic' target to new 'legacy' target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: split scripts/metadata.pl into target-metadata.pl and package-metadata.plFelix Fietkau2016-06-071-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: remove NAMESPACES config symbolsDirk Neukirchen2016-06-061-4/+0
| | | | | | they are available in config/Config-kernel.in Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* mpc85xx: remove unneeded symbolsDirk Neukirchen2016-06-061-3/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* zynq: remove unneeded _DIAG and _XFRM symbolsDirk Neukirchen2016-06-061-7/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* sunxi: remove XFRM_ config symbolsDirk Neukirchen2016-06-061-2/+0
| | | | | | they are part of packages Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* oxnas: remove unneeded _DIAG symbolsDirk Neukirchen2016-06-061-5/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* malta: remove NAMESPACES config symbolsDirk Neukirchen2016-06-061-6/+0
| | | | | | they are available in config/Config-kernel.in Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* malta: remove unneeded symbolsDirk Neukirchen2016-06-061-3/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* ar71xx: add WRTnode2Q supportKeLei Liang2016-06-0610-2/+165
| | | | Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
* x86: use sysfs DMI information to populate sysinfoJo-Philipp Wich2016-06-061-0/+28
| | | | | | | | | | | | | | | | | | Use the DMI data available in sysfs to extract manufacturer and model info and write it to /tmp/sysinfo/. The data will be picked up by board_detect and can be used by e.g. LuCI to display a more appropriate model description. On an APU board the files will contain the following values: # cat /tmp/sysinfo/model PC Engines APU # cat /tmp/sysinfo/board_name pc-engines-apu Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: enable DMI and DMI_SYSFSJo-Philipp Wich2016-06-063-12/+6
| | | | | | | | | | Enable support for DMI decoding in the kernel so that we can access manufacturer and model information via sysfs. Also remove redundant per-subtarget DMI overrides and preset a few previously unset symbols popping up due to the now enabled DMI support. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mediatek: remove modules from Kernel configDirk Neukirchen2016-06-051-85/+0
| | | | | | | | | | | | most symbols should be in Kernel packages depending on HW the removal of CONFIG_REALTEK_PHY and USB symbols might be wrong compile tested only Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* ipq806x: add diag.sh scriptSigned-off-by: Henryk Heisig2016-06-051-0/+31
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* lantiq: un-macro the image building codeJohn Crispin2016-06-0516-382/+394
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-06-051-3/+3
| | | | | | | Calling `cat foo bar | dd ... conv=sync` *may* add extraneous padding. Avoid this. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: rebrand Netgear EX2700 fakeroot uImageJoseph C. Lehner2016-06-051-0/+0
| | | | | | Change image name: "OpenWrt fakeroot" -> "LEDE fakeroot" Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* arc: Build uImage as well as vmlinux output filesAlexey Brodkin2016-06-052-16/+72
| | | | | | | | | | | | | | | | | | | | | | Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* lantiq/image: move tplink specific image into own fileAlexander Couzens2016-06-052-44/+46
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* lantiq: unmacro tp-link boardsAlexander Couzens2016-06-051-14/+25
| | | | | | | even it's a little bit verbose, unmacrod board descriptions are much easier to read and to understand. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kernel/mtd: Add support for Macronix mx25u25635f, used in Archer C2600 v1.1Ash Benz2016-06-051-0/+10
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ixp4xx: Drop linux 4.1 supportTed Hess2016-06-0542-9767/+0
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* ixp4xx: Add support for 4.4 kernel, refresh patchesTed Hess2016-06-0543-1/+9768
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* brcm63xx: fix typo image/MakefileÁlvaro Fernández Rojas2016-06-051-1/+1
| | | | | | This typo was introduced in c6990347 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add initial support for Netgear EVG2000Graham Fairweather2016-06-038-1/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set DSL-274XB-F1 ath9k LED as active highÁlvaro Fernández Rojas2016-06-0335-102/+103
| | | | | | D-Link DSL-274XB rev F1 has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set HG556a A/B ath9k LED as active highÁlvaro Fernández Rojas2016-06-0324-61/+63
| | | | | | Huawei HG556a has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add support for inverting ath9k LED polarityÁlvaro Fernández Rojas2016-06-032-9/+12
| | | | | | | Some devices with ath9k WiFi require changing the default active low polarity to high in order to correctly operate the WiFi status LEDs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: remove obsolote preinit scripts and fix preinit iface scriptÁlvaro Fernández Rojas2016-06-034-84/+23
| | | | | | | | | | These scripts were causing ip issues in the latest version of LEDE: https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00 Fixes preinit iface script by making eth0 the default ifname and only changing it to eth1 for the devices that specifically need it. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: move profiles definitions to image/MakefileÁlvaro Fernández Rojas2016-06-0328-1359/+1072
| | | | | | This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: refresh kernel patches and configÁlvaro Fernández Rojas2016-06-034-12/+19
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: drop linux 4.1 supportÁlvaro Fernández Rojas2016-06-03162-16487/+0
| | | | | | Switch to linux 4.4 now that it has been enough tested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: switch to linux 4.4Álvaro Fernández Rojas2016-06-031-1/+2
| | | | | | Boot tested on AR-5381u, AR-5387un and WAP-5813n Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add kmod-pwm-mediatek for mt7628/mt7688Álvaro Fernández Rojas2016-06-031-1/+21
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix the number of uarts for each SoCÁlvaro Fernández Rojas2016-06-036-7/+4
| | | | | | | | - Use default number of uarts (2) for rt288x/rt305x/rt3883/mt7620. - Allow up to 3 uarts on MT7621 and MT7628. - Remove unneeded SERIAL_8250_RT288X for MT7628. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix Mi Wi-Fi Nano Wireless LED pinmuxÁlvaro Fernández Rojas2016-06-031-2/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* omap: switch to 4.4Alexander Couzens2016-06-022-98/+62
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* linux/generic: add missing config symbolsAlexander Couzens2016-06-021-0/+7
| | | | | | | | | | | | | unset following config symbols - INPUT_PALMAS_PWRBUTTON - INPUT_TPS65218_PWRBUTTON - INPUT_TWL4030_PWRBUTTON - INPUT_TWL4030_VIBRA - INPUT_TWL6040_VIBRA - KEYBOARD_TWL4030 - TWL4030_MADC Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 20:45:28 +0000