aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Expand)AuthorAgeFilesLines
* Flash mapping fixes from sn9, thanksFlorian Fainelli2008-11-012-18/+24
* setup speed/duplex on RB-433/450 (closes #4151)Gabor Juhos2008-10-313-1/+16
* add missing config optionFelix Fietkau2008-10-291-0/+1
* Update kernel configuration and add profiles and per-profile kernel configura...Florian Fainelli2008-10-285-9/+48
* Add flashmap support for AMIT and Zyxel boards, thanks sn9Florian Fainelli2008-10-282-6/+300
* Remove some configuration files, workarounds are now in the ethernet driver, ...Florian Fainelli2008-10-284-46/+38
* Add amit boards specific fixupsFlorian Fainelli2008-10-284-0/+124
* improve routing/nat performance for devices using the marvell 88e6060 switchFelix Fietkau2008-10-285-10/+89
* Prepare image Makefile to generate valid images for amit and g570s boards, th...Florian Fainelli2008-10-281-5/+21
* Fix target description and features available for rdcFlorian Fainelli2008-10-281-2/+2
* Use 2.6.27.4 kernel versionFlorian Fainelli2008-10-281-1/+1
* Add preliminary support for USR8200 boardPeter Denison2008-10-261-0/+327
* Fix typoFlorian Fainelli2008-10-241-1/+1
* select gpioctl by default on atherosFelix Fietkau2008-10-231-1/+1
* Update to 2.6.26.7Florian Fainelli2008-10-2314-14/+14
* Update targets to 2.6.27.3Florian Fainelli2008-10-231-1/+1
* fix accidentally committed typoFelix Fietkau2008-10-231-1/+1
* Update patches and rename board 9 stands for development boardFlorian Fainelli2008-10-223-9/+16
* remove more redundant files and clone files-2.6.23 for 2.6.24 - fixes rdc bui...Felix Fietkau2008-10-22165-45570/+7767
* Add missing evaloader specific changes from #2830Florian Fainelli2008-10-201-3/+8
* Do not use dynamic ticks on rb532 (#4110)Florian Fainelli2008-10-201-2/+2
* Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when ...Florian Fainelli2008-10-205-2/+120
* fix boot failure on some boardsGabor Juhos2008-10-201-0/+108
* Remove me from the gpio-spi related stuffMichael Büsch2008-10-193-70/+54
* change the way ./files* and the generic kernel files are applied. ./files now...Felix Fietkau2008-10-18122-8964/+0
* add new switch configuration apiFelix Fietkau2008-10-188-0/+2132
* atheros: clean up the board data detection code and attempt to boot the kerne...Felix Fietkau2008-10-181-17/+77
* don't override CONFIG_BLK_DEVGabor Juhos2008-10-181-1/+0
* New Broadcom BCM63xx codebase, huge thanks to Maxime ;)Florian Fainelli2008-10-1714-1/+10838
* don't override CONFIG_CRYPTOGabor Juhos2008-10-171-1/+0
* don't override CONFIG_BRIDGEGabor Juhos2008-10-171-3/+0
* change ag71xx platform device registrationGabor Juhos2008-10-175-27/+61
* fix RB-493 detectionGabor Juhos2008-10-161-0/+3
* move inclusion of the mach-ar71xx/Kconfig into the right patchGabor Juhos2008-10-166-20/+20
* refresh patches against 2.6.27 finalGabor Juhos2008-10-15133-433/+433
* preliminary support for the RB-493/AH, based on a patch by Carl RiechersGabor Juhos2008-10-153-4/+29
* minor ethernet driver updateGabor Juhos2008-10-153-9/+11
* change mtd partition map, use rootfs_split, and generate a firmware image for...Gabor Juhos2008-10-133-19/+20
* allow the mkmylofw command to fail in case the image is too big for some comp...Felix Fietkau2008-10-131-1/+1
* mark ar71xx as no longer broken and enable madwifiFelix Fietkau2008-10-131-2/+2
* enable debugfs by defaultFelix Fietkau2008-10-111-1/+1
* fixup GPS on the cambria - thanks ChrisImre Kaloz2008-10-094-24/+36
* experimental support for 2.6.27Gabor Juhos2008-10-0911-0/+595
* fix 2.6.26.x boot failure on ar2313 (closes #4082)Gabor Juhos2008-10-081-1/+1
* fix section mismatch warningGabor Juhos2008-10-081-1/+1
* sync kernel configGabor Juhos2008-10-071-3/+0
* refresh 2.6.27 patches based on -rc9Gabor Juhos2008-10-0710-52/+43
* fix compile errors in USB driver under 2.6.27Gabor Juhos2008-10-071-0/+69
* don't register GPIO 0 as LED. it drives the chip select line of the SPI flash...Felix Fietkau2008-10-071-1/+1
* update mini_fo fix for 2.6.27Gabor Juhos2008-10-061-3/+13