aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: fix typo image/MakefileÁlvaro Fernández Rojas2016-06-051-1/+1
| | | | | | This typo was introduced in c6990347 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add initial support for Netgear EVG2000Graham Fairweather2016-06-038-1/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set DSL-274XB-F1 ath9k LED as active highÁlvaro Fernández Rojas2016-06-0335-102/+103
| | | | | | D-Link DSL-274XB rev F1 has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: set HG556a A/B ath9k LED as active highÁlvaro Fernández Rojas2016-06-0324-61/+63
| | | | | | Huawei HG556a has an active high ath9k LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add support for inverting ath9k LED polarityÁlvaro Fernández Rojas2016-06-032-9/+12
| | | | | | | Some devices with ath9k WiFi require changing the default active low polarity to high in order to correctly operate the WiFi status LEDs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: remove obsolote preinit scripts and fix preinit iface scriptÁlvaro Fernández Rojas2016-06-034-84/+23
| | | | | | | | | | These scripts were causing ip issues in the latest version of LEDE: https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00 Fixes preinit iface script by making eth0 the default ifname and only changing it to eth1 for the devices that specifically need it. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: move profiles definitions to image/MakefileÁlvaro Fernández Rojas2016-06-0328-1359/+1072
| | | | | | This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: refresh kernel patches and configÁlvaro Fernández Rojas2016-06-034-12/+19
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: drop linux 4.1 supportÁlvaro Fernández Rojas2016-06-03162-16487/+0
| | | | | | Switch to linux 4.4 now that it has been enough tested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: switch to linux 4.4Álvaro Fernández Rojas2016-06-031-1/+2
| | | | | | Boot tested on AR-5381u, AR-5387un and WAP-5813n Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add kmod-pwm-mediatek for mt7628/mt7688Álvaro Fernández Rojas2016-06-031-1/+21
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix the number of uarts for each SoCÁlvaro Fernández Rojas2016-06-036-7/+4
| | | | | | | | - Use default number of uarts (2) for rt288x/rt305x/rt3883/mt7620. - Allow up to 3 uarts on MT7621 and MT7628. - Remove unneeded SERIAL_8250_RT288X for MT7628. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix Mi Wi-Fi Nano Wireless LED pinmuxÁlvaro Fernández Rojas2016-06-031-2/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* omap: switch to 4.4Alexander Couzens2016-06-022-98/+62
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* linux/generic: add missing config symbolsAlexander Couzens2016-06-021-0/+7
| | | | | | | | | | | | | unset following config symbols - INPUT_PALMAS_PWRBUTTON - INPUT_TPS65218_PWRBUTTON - INPUT_TWL4030_PWRBUTTON - INPUT_TWL4030_VIBRA - INPUT_TWL6040_VIBRA - KEYBOARD_TWL4030 - TWL4030_MADC Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* omap: take over maintainershipAlexander Couzens2016-06-021-1/+1
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kernel: update kernel 4.4 to version 4.4.12Álvaro Fernández Rojas2016-06-02111-1363/+567
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: fix F@ST2704V2 image generationÁlvaro Fernández Rojas2016-06-011-1/+1
| | | | | | This device needs the firmware padded to 4MB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* IB/SDK/toolchain: use lower cases filenamesAlexander Couzens2016-06-013-3/+3
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* IB/SDK/toolchain: use VERSION_DIST_SANITIZED instead of VERSION_DISTAlexander Couzens2016-06-013-3/+3
| | | | | | VERSION_DIST can contains spaces which produces problems when used as file name Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx/image/edimax shorten the revision to 13 characterAlexander Couzens2016-06-011-2/+2
| | | | | | | edimax fails if the revision is longer than 13 characters. Also change the name from OpenWrt to LEDE Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* brcm2708: fix build error introduced in 2b4e5d47Álvaro Fernández Rojas2016-06-011-4/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: add Widora-NEO board supportYuan Chenmang2016-06-016-1/+184
| | | | | | | | | The Widora board is similar to the Linkit 7688 but features a larger flash capacity. Signed-off-by: Yuan Chenmang <771992497@qq.com> [Jo-Philipp Wich: Reword commit message, cleanup initial PR] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Fix TL-WR841N v11 LEDs, use separate machineStijn Segers2016-05-318-3/+80
| | | | Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* mediatek: more nand fixesJohn Crispin2016-05-312-15/+24
| | | | | | jffs2 failed to laod off nand Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add a default profileJohn Crispin2016-05-311-0/+9
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: enable PM supportJohn Crispin2016-05-311-0/+2
| | | | | | this fixes build errors with latest mac80211 Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-05-301-2/+3
| | | | | | | | The previous image creation code would have failed if the unpadded kernel uImage size was less than 64 bytes from the next erase block boundary. Fix that. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ipq806x: remove accidentially comitted fileJohn Crispin2016-05-301-464/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: fix 3.18 supportJohn Crispin2016-05-2781-0/+23230
| | | | | | accidentially removed the files in the v4.4 commit Signed-off-by: John Crispin <john@phrozen.org>
* kernel: remove a hack that was obsoleted upstreamDaniel Gimpelevich2016-05-272-25/+1
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: Use correct macaddr generating logic for the DGN3500Daniel Gimpelevich2016-05-271-0/+5
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: Fix macaddr-setting code on DGN3500 and possibly other devicesDaniel Gimpelevich2016-05-271-4/+4
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: Use the correct SPI flash speed for the Netgear DGN3500Daniel Gimpelevich2016-05-271-1/+1
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* tools/tplink-safeloader: split CPE210 from CPE510 profileAlexander Couzens2016-05-271-0/+1
| | | | | | | | | The CPE210 was still described for the OEM upgrade as compatible, even the wireless configuration isn't compatible anymore between both series (2ghz and 5ghz). Update the CPE210 image profile to use the new profile. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: switch ordering and template to improve readabilityAlexander Couzens2016-05-271-5/+5
| | | | | | | The CPE210's ancestor is the CPE510 not the other way around. The device profile is also named after the CPE510. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-05-271-8/+4
| | | | | | | | The bootloader on this device expects the kernel partition to end on a 64k boundary. The last 64 byte of the kernel partition must contain a valid uImage header (the fakeroot partition). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* kernel/mtd: Add support for Macronix mx25u25635f, used in C2600 v1.1Ash Benz2016-05-271-0/+10
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/dts: Add Archer C2600 DTSAsh Benz2016-05-271-0/+425
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: extract ath10k caldataAsh Benz2016-05-271-0/+68
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: Add support for Archer C2600Ash Benz2016-05-272-1/+22
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x/base-files: Add Archer C2600 LEDs and boardAsh Benz2016-05-272-0/+8
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x: Add Archer C2600 to image/MakefileAsh Benz2016-05-271-1/+24
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x: Add support for linux-4.4Ram Chandra Jangir2016-05-27137-24887/+628
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
* include/image.mk: move build step tplink-safeloader to image.mkAsh Benz2016-05-271-12/+0
| | | | | | Move tplink-safeloader from target/linux/ar71xx/image/tp-link.mk to include/image.mk Signed-off-by: Ash Benz <ash.benz@bk.ru>
* lantiq: do not build images which exceed the flash sizeMathias Kresin2016-05-271-42/+46
| | | | | | | | | | The user benpicco in #openwrt reported that images are build which are bigger that the available flash size. He provided a proof of concept fix and gave permission to me to send it for inclusion. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - enable the IP101A phyMathias Kresin2016-05-272-5/+23
| | | | | | | | | | | | The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - fix pinmux configurationMathias Kresin2016-05-271-25/+1
| | | | | | | | | | | The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - fix brn partition layoutMathias Kresin2016-05-271-4/+50
| | | | | | | | | Use the brnboot partition layout as it is listed in the OpenWrt wiki article for this board. Configure the brnboot root selector for this device as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - get mac address from board_config partitionMathias Kresin2016-05-271-2/+3
| | | | | | | Use the mac address stored in the board_config partition instead of a static one. Signed-off-by: Mathias Kresin <dev@kresin.me>