aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: change compiler flags to arm cortex-a15Josh Bendavid2016-07-171-1/+1
| | | | Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* ramips: mt7621: add missing kernel symbolJo-Philipp Wich2016-07-161-0/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: add software transmit timestamp supportStephen Walker2016-07-152-0/+3
| | | | | | Add software transmit timestamp and ethtool (-T) timestamp support Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
* ar71xx: define wmac reset function for QCA955xFelix Fietkau2016-07-152-3/+85
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target.mk: rework arm architecture level detectionFelix Fietkau2016-07-151-6/+0
| | | | | | | | Use kernel config as input instead of -march CFLAGS. With this change, -march can be dropped and replaced with more specific optimization flags for better code generation. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: clean up redundant code related to DEVICE_DTSFelix Fietkau2016-07-1510-20/+6
| | | | | | | | It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: image: don't suppress "mv" command echoingRafał Miłecki2016-07-141-1/+1
| | | | | | | | We call all commands normally, with standard echoing. It's useful for debugging with V=s. Don't make lzma compression an exception, it's a bit confusing this way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: simplify image building codeFelix Fietkau2016-07-142-40/+15
| | | | | | Use append-ubi template for ubinize, remove mkfs override Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: remove duplicate template data from the image makefileFelix Fietkau2016-07-141-8/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: clean up UBI related device variable definitionsFelix Fietkau2016-07-143-6/+5
| | | | | | | Move UBI related variable export to core, since the variables are used by a core Build/ template Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: remove obsolete UBINIZE_OPTS variablesFelix Fietkau2016-07-141-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for jjPlus JWAP230Piotr Dymacz2016-07-1310-0/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel/mtd: add support for EON EN25Q128Piotr Dymacz2016-07-131-0/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Wallys DR531Piotr Dymacz2016-07-1311-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* sdk: Allow to configure signed pacakge listsDaniel Dickinson2016-07-131-0/+4
| | | | | | Add option to enable signing packages lists in SDK. Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ar71xx: fix build error when initramfs is disabledFelix Fietkau2016-07-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to version 4.4.15Hauke Mehrtens2016-07-1319-208/+62
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: fix a legacy image porting issueFelix Fietkau2016-07-132-8/+1
| | | | | | | Get rid of remaining IMAGE_PROFILE references and move template calls the right place Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x64: add legacy IDE, fix VirtualBox bug #84 and Fujitsu Futro S550-2Lucian Cristian2016-07-121-1/+3
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* kernel: Add upstream fix for module loadingAlexey Brodkin2016-07-111-0/+46
| | | | | | | | | | Instead of disabling unwinding entirely this upstream patch just disables generation of async unwind tables. Once the patch in question lands in stable 4.4 tree this change essentially must be removed (otherwise patch application will fail). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* Revert "linux: arc: disable kernel unwinding to fix modules loading"Alexey Brodkin2016-07-112-2/+5
| | | | | | | | | | This reverts commit acd41539d630688e9891003c9b51cace3e113316. There's a fix in upstream that will at some point land in 4.4 stable as well so we'll get rid of this hack and with the next commit will apply upstream fix. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* linux/archs38: Add wireless AP capabilities similarly to axs101Alexey Brodkin2016-07-112-2/+2
| | | | | | | Now when ath9k-htc USB dongle works with axs103 in OHCI mode quite fine adding corresponding features to default configuration. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* ar71xx: Fix PowerCloud CAP324 No Cloud titleDaniel Dickinson2016-07-111-1/+1
| | | | | | CAP324 nocloud was missing (No-Cloud) in description Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ramips: modify audio kernel module and add dma optionsMichael Lee2016-07-111-2/+42
| | | | | | | | | * add gdma and hsdma kernel modules * i2s support all ramips targets except rt288x * i2s need gdma to transfer data * add simple audio kernel module. it support device tree binding Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: Add support for D-Link DCH-M225Michael Lee2016-07-119-0/+233
| | | | | | | | D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: add MT7620 pinmux bits for mdio as refclkMichael Lee2016-07-111-0/+42
| | | | | | The MT7620 uses a 2 bit wide configuration of the mdio. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: enable MTD_SPLIT_SEAMA_FW for mt7620Michael Lee2016-07-111-0/+1
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: Add support for the NixCore X1 ModuleL. D. Pinney2016-07-118-0/+270
| | | | | | | | | The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module. http://nixcores.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Drew Gaylo <drew@nixcores.com>
* ramips: fix partition size for RT5350F-OLINUXINORene Treffer2016-07-112-2/+2
| | | | | | | | | The partition size is wrong, leading to out-of-disk-space even on no/moderate use. Upstream fix from vendor: https://github.com/OLIMEX/openwrt/commit/2f25eb57edc79d33c4810d185c193be4293c434a Suggested fix for openwrt: https://dev.openwrt.org/ticket/20321 Signed-off-by: Rene Treffer <treffer@measite.de>
* ramips: fix usb phy initialisationJohn Crispin2016-07-112-1/+36
| | | | | | this broke usb20 device detection. Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: base-files: remove the now unneeded 09_fix-seama-headerYousong Zhou2016-07-111-21/+0
| | | | | | | | | | | | It was intended as a workaround when jffs2 eof mark was included in the checksum calculation in seama header. When qihoo-c301 support was introduced the board name was not inserted into the case list (because I was not aware of it's existence), but the issue was fixed by excluding the jffs2 marker as part of the checksum data Now we are at it, drop it. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: fix typo in MTDPARTS def for qihoo-c301Yousong Zhou2016-07-111-1/+1
| | | | | Reported-by: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: seama: fix making factory and sysupgrade imageYousong Zhou2016-07-111-11/+12
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-07-09405-776/+4719
| | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: fix image generation with offsets/blocksizes != 64KJonas Gorski2016-07-091-2/+2
| | | | | | | | | | | Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with IMAGE_OFFSET in DEVICE_VARS. This fixes image generation for targets using different offsets or blocksizes. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix CVG834G compatible stringJonas Gorski2016-07-091-1/+1
| | | | | | | The CVG834G claimed to be a BCM6348, but is actually BCM3368. Since we don't test against it, this was harmless. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* bcm53xx: fix kernel config after USB2 PHY driver backportFelix Fietkau2016-07-081-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: use upstream fix simplifying USB power GPIO usageRafał Miłecki2016-07-073-27/+37
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: backport driver for Northstar's USB 2.0 PHYRafał Miłecki2016-07-072-0/+302
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: backport BCM5301x patches from 2016-07-06Rafał Miłecki2016-07-077-46/+287
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* ramips: fix build error in ubnt-erx initramfs factory imageFelix Fietkau2016-07-062-4/+5
| | | | | | | Build initramfs kernel image, but skip factory image if initramfs size is too big. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* usb: Remove annoying warning about bogus URBAlexey Brodkin2016-07-051-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* linux/archs38: Disable USB 2.0Alexey Brodkin2016-07-052-2/+2
| | | | | | | | | As of today USB 2.0 (AKA EHCI) doesn't work on axs103 board and so there's no reason to build corresponding software for it. Once USB 2.0 gets fixed on axs103 thi patch might be reverted. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* lantiq: mac address setting on BTHOMEHUBV3ABen Mulvihill2016-07-051-2/+1
| | | | | | | | | | Rename uboot environment partition on BT Home Hub 3A so that mac address setting works correctly. Also, the mac address field in the ath9k calibration data is not used, and should not be referenced in the dts. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* tools: add kernel2minor utility for Mikrotik devicesSergey Sergeev2016-07-052-2/+5
| | | | | | | | This patch adds support of Mikrotik yaffs2 filesystem image for kernel file and tools/kernel2minor package. We neede this to boot kernel through RouterBoot on new Mikrotik NOR flash devices. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ramips: fix buffalo wmr-300 lan portJohn Crispin2016-07-051-2/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix nand device profileJohn Crispin2016-07-054-19/+19
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix MT7621 gsw handlingJohn Crispin2016-07-051-0/+31
| | | | | | based on https://forum.openwrt.org/viewtopic.php?pid=323671#p323671 Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix mt7621 SoC detectionJohn Crispin2016-07-051-0/+11
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* bcm53xx: calculate Seama MD5 using content of kernel partitionRafał Miłecki2016-07-041-1/+1
| | | | | | | We don't want checksum to cover any part of UBI as even its part with SquashFS may be changed due to e.g. flash wearing. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 23:12:07 +0000