aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: move OCEDO Koala to generic and use dynamic partitioningDavid Bauer2018-10-294-14/+10
| | | | | | | | | | | This changes the OCEDO Koala flash-layout to a unified firmware partition, thus making the ar71xx-generic kernel fit in flash. Compile and runtested on OCEDO Koala. Signed-off-by: David Bauer <mail@david-bauer.net> [small title reword] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: fix PQI Air Pen supportMathias Kresin2018-10-281-0/+0
| | | | | | Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: add support for PQI Air PenYuheiOKAWA2018-10-284-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9330 (or AR9331 revision?) Ethernet x1, Wireless 2.4G, uSD card slot x1. USB Power, include Li-Po Battery. Flash 8MiB. (factory is dual image) 1. write image is use half 4MiB size from factory. write initramfs image to mtd6 and mtd7. 2. change next boot setting. next is mtd6 boot. echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 3. rewrite sysupgrade image. change next boot setting. next is mtd4. echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 OEM mtd. dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00010000 00010000 "ART" mtd3: 00010000 00010000 "NVRAM" mtd4: 00140000 00010000 "uImage" mtd5: 00280000 00010000 "rootfs" mtd6: 00140000 00010000 "uImage2" mtd7: 00280000 00010000 "rootfs2" mtd8: 00010000 00010000 "CONF" Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
* ath79: Add support for Ubiquiti LiteAP ac (LAP-120)Roger Pueyo Centelles2018-10-284-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor 5 GHz AC access point with an integrated 120° 16 dBi antenna. The device was previously known as LiteBeam AP ac but was later rebranded. CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI Ports: 1 GbE port (PoE in) WLAN: 5 GHz QCA899X (PCI) The integrated QCA899X is a Ubiquiti branded part with modified vendor and product id (0777:11ac9). It is very similar to the NanoStation loco AC, except for the 2.4 GHz management radio (missing here). Installation procedure is the same as the NanoStation [loco] AC: 1. Connect to serial header on device 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* kernel: add missing symbol for target bcm53xxKoen Vandeputte2018-10-231-0/+1
| | | | | | | Fixes: ca88f4153f8f ("kernel: bump 4.14 to 4.14.77") Reported-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: use upstream SPI controller fixRafał Miłecki2018-10-231-3/+5
| | | | | | This just moves patch to use 0xx prefix and includes maintainer's s-o-b. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.78Koen Vandeputte2018-10-225-57/+9
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.135Koen Vandeputte2018-10-222-11/+11
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2018-10883 Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mpc85xx: workaround 4.14 cross compile issueRyan Mounce2018-10-201-0/+10
| | | | | | | | | | | Regression introduced with 4.10 by 43c9127d94d62a232ed33ed2eab8a08657ce5472 Build will fail if system 'ar' does not support deterministic builds. e.g. macOS with Xcode toolchain Appears to be fixed upstream in 4.18 by af3901cbbd3de182aafb8ee553c825c0074df6a2 Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* apm821xx: add disk-activity triggers via DT.Christian Lamparter2018-10-203-5/+2
| | | | | | | | The WNDR4700 and the MBL have a dedicated HDD activity LED. This patch adds the default led triggers to the DTS and removes the entries in 01_leds. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: apm82181.dtsi overhaulChristian Lamparter2018-10-201-135/+139
| | | | | | | | | | | | | | | | | | | - order entries by mmio address where possible - switch to lower-case address values - comment on BSP u-boot behaviour in regards to what it edits and look for - annotate irq lines with the help of interrupt-names - remove deprecated "device_type" properties The pci and network device_type had to stay since they are required by the drivers and u-boot. the cpu and memory device_types will remain as well as they are still part of the DT Spec. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: force WNDR4700 console to 115200n8Christian Lamparter2018-10-201-1/+1
| | | | | | | | | | | | | | | | | | | With the upcoming 4.19 release, the serial console on the Netgear WNDR4700 would no longer work as it is never really set and always relied on the kernel's serial code not to change the baud rate. On the stock firmware, Netgear forced the console setting through a custom CONFIG_CMDLINE in their kernel to 115200. Normally, they should have done it in a different way and just passed the baudrate through a "console=..." kernel parameter via the bootargs in the "/chosen" dt node. But in their default u-boot bootcmd setting, they somehow forgot to add the "run addtty", so there's no easy way to pass the baudrate from u-boot to the kernel. So it has to be forced as otherwise it ends up as 9600 baud. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: set uart compatible to ns16750Christian Lamparter2018-10-201-6/+11
| | | | | | | The APM821XX/PPC460EX datasheet mentions: "Register compatibility with 16750 register set" Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: Fix up image generationLinus Walleij2018-10-201-6/+10
| | | | | | | | | | | | | | | I noticed that the image generator for the Gemini generates some 10+ MB files for the second (application) partition. This is just wrong. The first 6144K partition named initramfs easily fits OpenWRTs squashfs,jffs2 overlayed partitions with nice headroom for storing configuration files. Generate a blank partition for the hddapp.tgz file and delete it after generating the firmware image - when performing updates manually you just want the "rd.z" file around anyways. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Break out USB to packagesLinus Walleij2018-10-203-8/+6
| | | | | | | | | | | | This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Add support for Winbond w25q128jv SPI NOR flashBaptiste Jonglez2018-10-206-9/+77
| | | | | | | | | | | | | | | | | Newer batches of several Mikrotik boards contain this yet-unsupported flash chip, for instance: - rb941-2nd (hAP lite) - rb952ui-5ac2nd (hAP ac lite) - RBM33G and probably other Mikrotik boards need this patch as well. The patch was submitted upstream by Robert Marko: https://patchwork.ozlabs.org/patch/934181/ Closes: FS#1715 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> Cc: Robert Marko <robimarko@gmail.com>
* kernel: bump 4.14 to 4.14.77Koen Vandeputte2018-10-1922-28/+39
| | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 666-Add-support-for-MAP-E-FMRs-mesh-mode.patch New symbol for arm targets: - HARDEN_BRANCH_PREDICTOR Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.134Koen Vandeputte2018-10-198-33/+33
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx/ath79: fix mtd corruptionFabio Bettoni2018-10-173-3/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit fec8fe806963 ("kernel: bump 4.9 to 4.9.116") [1], the following patch for removed: - 403-mtd_fix_cfi_cmdset_0002_status_check.patch This patch contained fixes for both write and erase functions. While the chip-detects for erase got fixed upstream [2], some modifications are still required, even with the fixes applied. While at it, also apply the same fix for target ath79, which suffers the same issue. Not doing so results in following errors seen: Collected errors: * pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-lib-ip.list: I/O error. * opkg_install_pkg: Failed to extract data files for luci-lib-ip. Package debris may remain! * opkg_install_cmd: Cannot install package luci-ssl. * opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: I/O error. [ 0.780920] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 8.406396] jffs2: notice: (415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.423476] mount_root: switching to jffs2 overlay [ 270.902671] jffs2: Write of 1989 bytes at 0x005ce6f8 failed. returned -5, retlen 962 [ 270.931965] jffs2: Write of 1989 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.939631] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.950397] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.957838] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.968584] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.976027] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [ 270.986735] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0 [ 270.994225] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero [1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=fec8fe806963c96a6506c2aebc3572d3a11f285f [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.9.133&id=a0239d83e1cb60de5e78452d4708c083b9e3dcbe Fixes: fec8fe806963 ("kernel: bump 4.9 to 4.9.116") Signed-off-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Move some targets to tinyKoen Vandeputte2018-10-174-3/+3
| | | | | | | | | | | | | | | | | | | Recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for some devices. Move these devices to the tiny target, where kernel symbols and optimization for speed are disabled, reducing the kernel size. Devices: - EnGenius ENS202EXT - OCEDO Koala Compile-tested targets: - ar71xx->generic->default - ar71xx->smallFlash->Default Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: use wpad-basic for not small flash targetsMathias Kresin2018-10-1665-130/+144
| | | | | | | | | | | | Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.14 to 4.14.76Koen Vandeputte2018-10-168-35/+35
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.133Koen Vandeputte2018-10-162-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.124Koen Vandeputte2018-10-162-5/+5
| | | | | | | | | Refreshed all patches. Compile-tested: adm5120 Runtime-tested: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: refresh mt7621 kernel configFelix Fietkau2018-10-151-5/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add CONFIG_CC_OPTIMIZE_FOR_* to the default configFelix Fietkau2018-10-154-6/+2
| | | | | | | Avoid repeating them in the target config, they are overwritten by top-level menuconfig anyway Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: add pending pinctrl driverRafał Miłecki2018-10-112-0/+427
| | | | | | | It's required to support devices using adjustable SoC pins for some specific purpose (e.g. I2C, PWM, UART1). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: replace SPI revert with a fix sent upstreamRafał Miłecki2018-10-112-146/+42
| | | | | | | | | Instead of reverting whole commit it's enough to just revert a single line change. It seems the real problem with the regressing commit was a bump of read chunk size. Switching back to 256 B chunks is enough to fix the problem/regression. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: remove kernel 4.9 supportMagnus Kroken2018-10-115-516/+0
| | | | Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mpc85xx: switch to kernel 4.14Magnus Kroken2018-10-111-1/+1
| | | | Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mpc85xx: add kernel 4.14 supportMagnus Kroken2018-10-115-0/+521
| | | | | | | | | Based on patches previously submitted by Achim Gottinger: http://lists.infradead.org/pipermail/openwrt-devel/2018-June/012719.html Tested on TP-Link TL-WDR4900 v1. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx: remove linux 4.9 supportKoen Vandeputte2018-10-1092-8105/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: switch to kernel 4.14Koen Vandeputte2018-10-101-1/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.75Koen Vandeputte2018-10-1022-99/+99
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.132Koen Vandeputte2018-10-101-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: enable memory compactionFelix Fietkau2018-10-0915-12/+6
| | | | | | | | | | | Compaction is the only memory management component to form high order (larger physically contiguous) memory blocks reliably. The page allocator relies on compaction heavily and the lack of the feature can lead to unexpected OOM killer invocations for high order memory requests. You shouldn't disable this option unless there really is a strong reason for it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
* kernel: support gcc-optimized inlining on all architecturesFelix Fietkau2018-10-095-1/+142
| | | | | | | | Optimized inlining was disabled by default when gcc 4 was still relatively new. By now, all gcc versions handle this well and there seems to be no real reason to keep it x86-only. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "kernel: add a RPS balancer"Stijn Tintel2018-10-081-93/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 7af1fb9faafbc842fc727c49108f5fc4edc08601. With the RPS balancer patch, both my APU2s are crashing, sometimes just after a few minutes of uptime. [ 6241.170132] BUG: unable to handle kernel paging request at ffffffffa20a75a8 [ 6241.177248] IP: get_rps_cpu+0x41c/0x440 [ 6241.181140] PGD 2012067 P4D 2012067 PUD 2013063 PMD 0 [ 6241.186370] Oops: 0000 [#1] SMP NOPTI [ 6241.190080] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet nf_conntrack_pptp lzo iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_policy xt_pkttype xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_REDIRECT xt_NFQUEUE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard usbserial ts_fsm ts_bm spidev slhc rfcomm nft_set_rbtree nft_set_hash nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir_ipv4 nft_redir nft_quota nft_numgen nft_nat nft_meta nft_masq_ipv4 nft_masq [ 6241.261735] nft_log nft_limit nft_flow_offload nft_exthdr nft_ct nft_counter nft_chain_route_ipv6 nft_chain_route_ipv4 nft_chain_nat_ipv4 nfnetlink_queue nf_tables_ipv6 nf_tables_ipv4 nf_tables_inet nf_tables nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv6 nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv6 nf_nat_ipv6 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan lzo_decompress lzo_compress libcrc32c kvm irqbypass [ 6241.333427] iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt cdc_acm btusb btintel br_netfilter bnep bluetooth sch_cake tcp_bbr sch_teql em_nbyte sch_codel sch_prio sch_pie act_ipt em_meta sch_gred sch_dsmark cls_basic em_cmp em_text act_police sch_sfq sch_fq sch_multiq sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress configs evdev i2c_piix4 kfifo_buf industrialio i2c_dev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set [ 6241.405252] nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ip_gre gre igb i2c_algo_bit ifb ip6_vti ip_vti sit l2tp_netlink l2tp_core ipcomp6 xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet esp6 ah6 ipcomp xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 ip6_tunnel tunnel6 tunnel4 ip_tunnel veth snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd soundcore mpls_gso mpls_iptunnel mpls_router af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm regmap_mmio vxlan udp_tunnel ip6_udp_tunnel ecdh_generic sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 seqiv jitterentropy_rng drbg md5 kpp ccp_crypto rsa_generic mpi asn1_decoder akcipher ccp sha256_generic [ 6241.477726] sha1_generic hmac ghash_generic gcm echainiv des_generic deflate zlib_deflate ctr cmac ccm cbc authenc crypto_acompress sdhci_pltfm pf_ring sp5100_tco leds_apu2 gpio_nct5104d button_hotplug ptp pps_core [ 6241.497122] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.73 #0 [ 6241.503198] Hardware name: PC Engines apu2/apu2, BIOS v4.8.0.2 20180705 [ 6241.509858] task: ffff88012a0d8000 task.stack: ffffc90000070000 [ 6241.515841] RIP: 0010:get_rps_cpu+0x41c/0x440 [ 6241.520246] RSP: 0018:ffff88012ed83db0 EFLAGS: 00010286 [ 6241.525511] RAX: 00000000ffffffff RBX: 0000000000011ae8 RCX: 0000000000000001 [ 6241.532737] RDX: 00000000ffffffff RSI: ffff88012a0d8788 RDI: 0000000000000282 [ 6241.539956] RBP: ffff88012ed83e00 R08: 0000000000000001 R09: 0000000000000000 [ 6241.547183] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82dae2e0 [ 6241.554403] R13: ffff880124de4480 R14: 0000000000000000 R15: ffff880128120000 [ 6241.561625] FS: 0000000000000000(0000) GS:ffff88012ed80000(0000) knlGS:0000000000000000 [ 6241.569820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6241.575651] CR2: ffffffffa20a75a8 CR3: 00000001251da000 CR4: 00000000000406e0 [ 6241.582830] Call Trace: [ 6241.585322] <IRQ> [ 6241.587372] ? lock_acquire+0x59/0x80 [ 6241.591102] netif_receive_skb_internal+0x1e4/0x2d0 [ 6241.596037] napi_gro_receive+0x48/0x90 [ 6241.599948] igb_alloc_rx_buffers+0xc97/0x1b60 [igb] [ 6241.604981] ? note_gp_changes+0x76/0xc0 [ 6241.608963] net_rx_action+0x10c/0x280 [ 6241.612752] __do_softirq+0xf0/0x22d [ 6241.616375] irq_exit+0x5e/0xa0 [ 6241.619573] do_IRQ+0xee/0x110 [ 6241.622682] common_interrupt+0x8b/0x8b [ 6241.626556] </IRQ> [ 6241.628699] RIP: 0010:native_safe_halt+0x6/0x10 [ 6241.633260] RSP: 0018:ffffc90000073e10 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff3d [ 6241.640910] RAX: ffff88012a0d8000 RBX: ffff88012a190c00 RCX: 0000000000000000 [ 6241.648110] RDX: ffff88012a0d8000 RSI: 0000000000000001 RDI: ffff88012a0d8000 [ 6241.655354] RBP: ffffc90000073e10 R08: 0000000000000006 R09: 0000000000000000 [ 6241.662554] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012a190c64 [ 6241.669791] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001 [ 6241.676986] acpi_safe_halt.part.9+0xe/0x20 [ 6241.681226] acpi_idle_do_entry+0x2c/0x40 [ 6241.685325] acpi_idle_enter+0x1ee/0x2b0 [ 6241.689298] ? sched_clock+0x9/0x10 [ 6241.692839] cpuidle_enter_state+0x1f2/0x230 [ 6241.697162] cpuidle_enter+0x12/0x20 [ 6241.700803] call_cpuidle+0x38/0x40 [ 6241.704335] do_idle+0xed/0x160 [ 6241.707557] cpu_startup_entry+0x6e/0x70 [ 6241.711557] start_secondary+0x1b4/0x1d0 [ 6241.715536] secondary_startup_64+0xa5/0xb0 [ 6241.719777] Code: d4 48 8d 04 9b 48 8b 35 53 a7 ac 00 48 8d 1c 43 48 83 c6 64 48 c1 e3 03 48 8d bb e8 e2 da 82 e8 cb a9 ba ff 41 8b 14 1c 48 89 d0 <48> 0f a3 15 dc dc b6 00 0f 83 46 fc ff ff 48 83 c4 28 5b 41 5c [ 6241.739100] RIP: get_rps_cpu+0x41c/0x440 RSP: ffff88012ed83db0 [ 6241.744993] CR2: ffffffffa20a75a8 [ 6241.748373] ---[ end trace 77367d9f9830d5bc ]--- Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: add support for Orange Pi ZeroJulian Haupt2018-10-071-0/+10
| | | | Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
* ath79: add Fritz!Box 4020 switchconfigDavid Bauer2018-10-071-1/+5
| | | | | | In contrast to ar71xx, uci switchconfig is missing in the ath79 target. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for TP-Link TL-WA901ND v2David Bauer2018-10-073-0/+140
| | | | | | | | | | | | | | | | | | This commit adds support for the TP-Link TL-WR901ND v2 access point. CPU: Atheros AR9132 400MHz RAM: 32MB FLASH: 4MiB WiFi: Atheros AR9103 3x3:2 bgn LED: Power (static on) LAN (controlled by PHY) SYS, WiFi, QSS toggleable BTN: Reset, QSS Installation: Upload the factory image via the vendor-GUI. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for Buffalo WZR-HP-G302H A1A0INAGAKI Hiroshi2018-10-074-0/+263
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WZR-HP-G302H is a 2T2R 2.4 GHz 11n router, based on Atheros AR7242. It is Japanese market model of WZR-HP-G300NH2, but there are some diffrences. This commit is based on WZR-HP-G300NH2 in ar71xx. And, G302H has several hardware versions and hardware is different dependent on the versions. This commit adds support for "A1A0" version. Specification: - Atheros AR7242 - 64 MB of RAM (DDR2) - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 2.4 GHz 2T2R wifi - Atheros AR9283 - 5x 10/100/1000 Mbps Ethernet - Atheros AR8316 - 7x LEDs, 5x keys - LED: 1x gpio-leds, 6x ath9k-leds - key: 3x buttons, 2x slide switches - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Boot WZR-HP-G302H normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/" and move to firmware update page ("ファーム更新") 3. Select the OpenWrt factory image and click update ("更新実行") button to perform firmware update 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: add hwver parameter to buffalo-tagINAGAKI Hiroshi2018-10-073-5/+6
| | | | | | | In order to be able to set the value of "hardware version" other than "3", I added the "hwver" parameter. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: Add support for TP-Link TL-WR842N-v2Robert Marko2018-10-074-1/+221
| | | | | | | | | | | | | | | | | | | | This PR adds support for TP-Link TL-WR842N-v2 router which is supported by ar71xx to ath79. This is a low cost model with following specs: CPU: Atheros AR9341 SoC RAM: 32 MB DDR1 Flash: 8 MB NOR SPI Switch: Internal AR9341 5 port 10/100 Mbit Ports: 5x 10/100 Mbit(1x WAN, 4x LAN) USB: 1x USB2.0 WLAN: 2.4 GHZ AR9341 Installation: Simply flash the factory image through stock firmware WEB UI. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: Create /var/lock directory in platform_do_upgrade_*Sven Eckelmann2018-10-071-8/+1
| | | | | | | | | | | | | | | | | | The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") while there were still scripts using it: * target/linux/ar71xx/base-files/lib/upgrade/allnet.sh * target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh * target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh Not running the hooks can either prevent a successful upgrade or brick the device because the fw_setenv program cannot be started correctly. Instead of adding this hook again, the directory /var/lock for fw_setenv can also just be created directly before fw_setenv is called. Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ar71xx: Create /var/lock directory in platform_do_upgrade_*Sven Eckelmann2018-10-072-16/+3
| | | | | | | | | | | | | | | | | | The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") while there were still scripts using it: * target/linux/ar71xx/base-files/lib/upgrade/allnet.sh * target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh * target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh Not running the hooks can either prevent a successful upgrade or brick the device because the fw_setenv program cannot be started correctly. Instead of adding this hook again, the directory /var/lock for fw_setenv can also just be created directly before fw_setenv is called. Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ar71xx: Use sysupgrade's RAMFS_COPY_* for fw_(set|print)envSven Eckelmann2018-10-073-9/+6
| | | | | | | | | | | | The install_bin from /lib/upgrade/common.sh is no longer creating the symlinks when a secondary parameter is added. But the fw_setenv program was always copied this way to the ramdisk for the upgrade. Instead, this should be done using RAMFS_COPY_* like on all other platforms. Fixes: 438dcbfe74a6 ("base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ath79: fix build warningMathias Kresin2018-10-071-2/+0
| | | | | | | | | | | | | | | | | | | | The image build code for the Ubiquiti Nanostation AC series adds the factory image as to be build image. The same is already done by an included recipe which results into an expanded IMAGE variable of: IMAGES = sysupgrade.bin factory.bin factory.bin The build system doesn't like these duplicates and issues the following warning: Makefile:82: warning: overriding recipe for target... Get remove the duplicate factory image to get rid of the warning. Fixes: 5736af8024be ("ath79: Add support for Ubiquiti NanoStation AC loco") fa3c2676ab0c ("ath79: Add support for Ubiquiti Nanostation AC") Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: don't hijack the status ledMathias Kresin2018-10-071-14/+0
| | | | | | | | | | Don't hijack the status led to indicate the wireless state. If we don't have a dedicated wireless led, it's as simply as the wireless status can't be indicated. Such a led misuse should be set by the user and not shipped by default. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move status led unset to devicetreeMathias Kresin2018-10-078-25/+0
| | | | | | | Release the led used for boot status indication via devicetree instead of setting a default off trigger in userspace. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 06:42:08 +0000