aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* generic/3.10: remove unused defines from the rootfs split patchGabor Juhos2013-09-141-9/+8
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37981
* generic/3.10: reduce number of ifdefs in the rootfs split codeGabor Juhos2013-09-141-14/+14
| | | | | | | | Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37980
* imx6: add network defaults for GW5400-ALuka Perkov2013-09-131-1/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37979
* brcm47xx: board detection, GPIO for Linksys E1000 V2.1Hauke Mehrtens2013-09-131-2/+4
| | | | | | | | | | | | | | This patch adds board detection for the Linksys E1000 V2.1 router, as well as GPIO support for same. This fixes bug #14135. Currently, wired networking isn't working on the router, and I haven't tried the wireless, but with this patch, OpenWRT successfully boots, and all the LEDs and buttons work properly. Signed-off-by: Zachary Catlin <zcatlin@indiana.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37977
* ar71xx: refresh patchesGabor Juhos2013-09-133-3/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37976
* generic/3.10: refresh patchesGabor Juhos2013-09-133-19/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37975
* generic/3.10: rename mtd patchesGabor Juhos2013-09-1312-3/+3
| | | | | | | | | | - change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37974
* cns21xx: remove 3.8 supportGabor Juhos2013-09-1319-7809/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37973
* cns21xx: switch to 3.10Gabor Juhos2013-09-131-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37972
* cns21xx: add support for 3.10Gabor Juhos2013-09-1319-0/+7837
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37971
* brcm47xx: detect WRT310NV1Hauke Mehrtens2013-09-131-2/+4
| | | | | | Thanks Devastator for testing SVN-Revision: 37969
* cns21xx: make cns21xx-ehci a separate driverGabor Juhos2013-09-133-115/+105
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37968
* cns21xx: disable legacy PTY devicesGabor Juhos2013-09-131-2/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37967
* cns21xx: fix broken case statement in led defaults fileGabor Juhos2013-09-131-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37966
* cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel optionsGabor Juhos2013-09-131-0/+2
| | | | | | | | | | | | | | | | Squashfs is unable to decompress some blocks without that: [ 0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt [ 0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72 [ 0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37965
* ar71xx: add support for TL-MR3040 v2Gabor Juhos2013-09-131-1/+3
| | | | | | | | | | This patch adds support for building firmware images for the TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37964
* ar71xx: add wireless bgn led support for dir-825-c1Gabor Juhos2013-09-131-0/+5
| | | | | | | | | | | | | I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37963
* brcm47xx: remove support for kernel 3.8Hauke Mehrtens2013-09-1258-7852/+2
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37959
* brcm47xx: add default config for new kernel config optionHauke Mehrtens2013-09-121-0/+1
| | | | SVN-Revision: 37958
* kernel: update bcma and ssb to wireless-testing master-2013-09-09Hauke Mehrtens2013-09-1221-1232/+1869
| | | | SVN-Revision: 37957
* kernel: add support for ESMT F25L32PA with upstream submissionLuka Perkov2013-09-121-0/+37
| | | | | | Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 37956
* kernel: align the skb padding to power of twoFelix Fietkau2013-09-115-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 37948
* kernel: fix broken depends syntax introduced in r37933Florian Fainelli2013-09-111-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37942
* kernel: Fix FIQ code on VIVT CPUs (#14145)Florian Fainelli2013-09-111-0/+55
| | | | | | | | Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37940
* imx6: backport ahci supportLuka Perkov2013-09-104-0/+545
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37936
* imx6: add i2c retry on NAKLuka Perkov2013-09-101-0/+40
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37935
* imx6: add gpio sysfs supportLuka Perkov2013-09-101-1/+2
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37934
* kernel: allow hwmon GSC driver for all targetsLuka Perkov2013-09-105-5/+5
| | | | | | | | | - enable using hwmon GSC driver on all targets - add a kmod package for it Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37933
* kernel: fix arch-dependent bug in hso moduleFelix Fietkau2013-09-1010-0/+490
| | | | | | | | | | Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 37931
* brcm47xx: add me as maintainerHauke Mehrtens2013-09-071-0/+1
| | | | SVN-Revision: 37916
* ar71xx: use the lzma loader for the WRT160NLGabor Juhos2013-09-071-2/+2
| | | | | | | | | | | | | | | | | | | | Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37915
* ppc40x: remove 3.8 supportGabor Juhos2013-09-078-2043/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37914
* ppc40x: switch to 3.10Gabor Juhos2013-09-071-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37913
* ppc40x: add support for 3.10Gabor Juhos2013-09-078-0/+2046
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37912
* brcm63xx: drop linux 3.9 supportJonas Gorski2013-09-06151-17416/+0
| | | | | | | | It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37911
* brcm63xx: switch to linux 3.10Jonas Gorski2013-09-061-1/+1
| | | | | | | | 3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37910
* kernel: b53: support phy ids for BCM5365Jonas Gorski2013-09-052-2/+28
| | | | | | | | | | | | BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37906
* Add missing symbolImre Kaloz2013-09-051-0/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 37897
* kernel: b53: allow access the MIB counters on BCM5365Hauke Mehrtens2013-09-041-1/+1
| | | | | | | | | | b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37895
* ar71xx: fix NetGear initramfs image namesGabor Juhos2013-09-031-1/+1
| | | | | | | | | The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37892
* kernel: update 3.10 to 3.10.10Gabor Juhos2013-09-0215-15/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37890
* ar71xx: image: reorder Image/Build/* macrosGabor Juhos2013-09-021-18/+35
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37889
* ar71xx: image: simplify more oneliner macrosGabor Juhos2013-09-021-46/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37888
* ar71xx: image: simplify oneliner loader macrosGabor Juhos2013-09-021-9/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37887
* ar71xx: image: simplify oneliner initramfs macrosGabor Juhos2013-09-021-42/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37886
* ar71xx: image: simplify oneliner buildkernel macrosGabor Juhos2013-09-021-22/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37885
* mcs814x: dlan-usb-extender: fix usbdev triggerFlorian Fainelli2013-09-021-1/+1
| | | | | | | | | | Every device I connect to the USB port is detected as 2-1, not 1-1. So adjust the default setting accordingly. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37882
* ar71xx: optimize kernel generationGabor Juhos2013-09-021-25/+77
| | | | | | | | | | | | | When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37881
* generic: remove linux version checks from myloader.cGabor Juhos2013-09-021-6/+0
| | | | | | | | | | | The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37880
* ar71xx: image: dynamically generate Image/Build/Template/* macrosGabor Juhos2013-09-021-79/+21
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37879
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:25:20 +0000