aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* move memory detect node to dtsi filesJohn Crispin2013-04-0963-236/+16
| | | | | | Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290
* Add Netgear WNCE2001 (OF version)John Crispin2013-04-0910-2/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289
* remove bootargs from dtsJohn Crispin2013-04-0953-196/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288
* add ofpart info to the devicetreesJohn Crispin2013-04-0950-0/+1170
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287
* add sample swconfig portmapJohn Crispin2013-04-091-0/+26
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286
* set of_node before registring the switchJohn Crispin2013-04-091-24/+45
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285
* allow loading port maps from OFJohn Crispin2013-04-093-0/+89
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283
* Adapt default network configuration for IPv6Steven Barth2013-04-0917-0/+123
| | | | SVN-Revision: 36278
* ramips: TEW-691GR.dts fixesGabor Juhos2013-04-081-15/+43
| | | | | | | | | | | * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276
* ramips: rt3883: enable the AR8216 driverGabor Juhos2013-04-081-0/+2
| | | | | | | | It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275
* ramips: add profile for the Omnima EMB-HPM boardGabor Juhos2013-04-081-0/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274
* ramips: OMNI-EMB-HPM.dts fixesGabor Juhos2013-04-081-5/+37
| | | | | | | | | | | * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273
* ramips: add mdio-bus node to rt3883.dtsiGabor Juhos2013-04-081-0/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272
* ramips: fix MDIO/PHY handlingGabor Juhos2013-04-081-0/+222
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271
* ramips: fix console speed for OMNI-EMB-HPMGabor Juhos2013-04-081-0/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270
* ramips: avoid invalid pointer dereference in pinmux codeGabor Juhos2013-04-081-2/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269
* ramips: TEW-692GR.dts fixesGabor Juhos2013-04-081-15/+45
| | | | | | | | | | | * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268
* ramips: add PCI node into RTN56U.dtsGabor Juhos2013-04-071-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264
* ramips: add PCI node for rt3883.dtsiGabor Juhos2013-04-071-0/+86
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263
* ramips: rt3883: enable PCI supportGabor Juhos2013-04-071-2/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262
* ramips: fix RT3883 PCI driverGabor Juhos2013-04-071-0/+856
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261
* ramips: refresh patchesGabor Juhos2013-04-073-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260
* ramips: add missing cpu-feature-override.h filesGabor Juhos2013-04-073-0/+245
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259
* ramips: fix broken patch nameGabor Juhos2013-04-071-0/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258
* ramips: fix polarity of GPIO buttons for RT-N56UGabor Juhos2013-04-071-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257
* x86/generic: remove old kernel configsGabor Juhos2013-04-072-397/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36256
* x86/generic: switch to 3.8Gabor Juhos2013-04-071-1/+1
| | | | | | | | Only tested within a VM. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36255
* x86/generic: add config for 3.8Gabor Juhos2013-04-071-0/+197
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36254
* x86/alix2: remove old kernel configsGabor Juhos2013-04-072-52/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36253
* x86/alix2: switch to 3.8Gabor Juhos2013-04-071-1/+1
| | | | | | | | Tested on an alix2d13 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36252
* x86/alix2: add config for 3.8Gabor Juhos2013-04-071-0/+26
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36251
* x86: add support for 3.8Gabor Juhos2013-04-0710-0/+1465
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36250
* ramips: add nor-flash node for the RT-N56UGabor Juhos2013-04-071-0/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249
* ramips: fix pinmux settings for the RT-N56UGabor Juhos2013-04-071-1/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248
* ramips: pinmux fixesGabor Juhos2013-04-075-0/+185
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247
* ramips: remove trailing whitespaces from dts filesGabor Juhos2013-04-077-7/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246
* ramips: handle PCI interrupts in plat_irq_dispatchGabor Juhos2013-04-071-0/+30
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245
* fix typos inside dts filesJohn Crispin2013-04-072-14/+14
| | | | | | Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244
* fix default commandline in dts filesJohn Crispin2013-04-075-5/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243
* ramips: add cfi_cmdset_0002 patchesGabor Juhos2013-04-072-0/+81
| | | | | | | | | The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242
* cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver ↵Felix Fietkau2013-04-072-6/+1
| | | | | | | | init and is useful only for testing Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36241
* ramips: remove top-level {address,size}-cells properties from .dts filesGabor Juhos2013-04-0758-116/+0
| | | | | | | | Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237
* brcm47xx: use old partition names again for kernel 3.8Hauke Mehrtens2013-04-062-1/+21
| | | | | | | | This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235
* brcm47xx: fix error in board detection when nvram is not available.Hauke Mehrtens2013-04-062-4/+8
| | | | SVN-Revision: 36234
* linux/3.8: implement pcibios_get_phb_of_node for MIPSGabor Juhos2013-04-062-0/+197
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36233
* linux/3.8: backport devm_ioremap_resource from 3.9Gabor Juhos2013-04-061-0/+251
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36232
* ramips: fix ethernet switch node in DIR-645.dtsGabor Juhos2013-04-061-3/+3
| | | | | | | | | Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231
* generic: rtl8367: add compatible string with vendor prefixGabor Juhos2013-04-061-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36230
* generic: rtl8367b: fix rtl8367b_extif_init_ofGabor Juhos2013-04-061-7/+18
| | | | | | | | | | | | * disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36229
* linux/3.8: add more missing symbolsGabor Juhos2013-04-061-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36228
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:23:06 +0000