aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: remove hostap driverFelix Fietkau2016-07-314-463/+1
| | | | | | | It has been marked as broken for well over a month now and nobody has complained. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: increase block2mtd rootfs probe timeout on ERFelix Fietkau2016-07-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: pad squashfs sysupgrade image rootfsFelix Fietkau2016-07-301-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: drop unsupported jffs2 feature flagFelix Fietkau2016-07-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: fix sysupgrade imagesFelix Fietkau2016-07-301-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix crashlog regression on x86Felix Fietkau2016-07-301-20/+32
| | | | | | | | Check memblock regions for sufficient size before attempting to use them. Allow checks for multiple memblock regions until a suitable one is found. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath25: rework image buildingJo-Philipp Wich2016-07-291-41/+27
| | | | | | | | * Remove legacy macros * Emit generic LZMA and Gzip kernel images from the combined device recipe * Rename combined device to generic Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-299-11/+11
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* octeon: clean up image build codeJo-Philipp Wich2016-07-291-13/+2
| | | | | | | Use the generic "sysupgrade-nand" build step to pack the sysupgrade file, it performs the same steps as the inline "tar-file" macro. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: remove obsolete variables from opkg commandFelix Fietkau2016-07-291-3/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: only attempt to mount /boot on MyBook LiveFelix Fietkau2016-07-291-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix switch configuration for EASY80920Hauke Mehrtens2016-07-284-24/+27
| | | | | | | | The device tree description misses some Ethernet ports and there was no model specified for this board. In addition there was no switch specific default configuration created. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix crashlog issues on various architecturesFelix Fietkau2016-07-281-13/+25
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix WBMR-300HPD switch port assignmentFelix Fietkau2016-07-281-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: fix image buildJo-Philipp Wich2016-07-281-1/+1
| | | | | | | | | | | | | | After b47f438 "build: remove image prefix from kernel files in KDIR", the kernel image in $(KDIR) has a different name and could not be found by the tar-file build step anymore, leading to the following error on the build servers: cp: cannot stat `.../linux-octeon/lede-octeon-generic-kernel.bin': No such file or directory make[4]: *** [.../linux-octeon/tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1 Adjust the path to the source kernel image in order to fix the problem. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: don't use D-Link DIR-505 status LED as ethernet indicatorMatthias Schiffer2016-07-281-4/+0
| | | | | | | | | The stock firmware uses the single LED as status indicator only. Using the same LED both for status and as ethernet indicator is uncommon, and has been confusing users who were using the device as a WLAN mesh node (so the LED was just off, as no ethernet was connected). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add revision detection for D-Link DIR-505 A1/A2Matthias Schiffer2016-07-281-0/+10
| | | | | | The A1 image also works on the A2, correctly set AR71XX_MODEL in this case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* bcm53xx: enable kernel symbols/drivers needed for BCM53573Rafał Miłecki2016-07-281-2/+7
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9Rafał Miłecki2016-07-284-2/+321
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: refresh kernel patchesRafał Miłecki2016-07-282-3/+3
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* ar71xx: add a missing ;; to ar71xx.shJohn Crispin2016-07-241-0/+1
| | | | | | | | commit 42305ae24aa7 ("ar71xx: add support for gl-mifi") was missing a ;; breaking boot up Signed-off-by: John Crispin <john@phrozen.org>
* b53: allow ports with higher numbers than CPU portRafał Miłecki2016-07-241-2/+1
| | | | | | | | | | | | | | Our code was assuming CPU port uses the highest number. My BCM53573 device has eth0 connected to port 8 and eth1 connected to port 5. While working on support for it I tried to: 1) Enable all ports (including port 8) 2) Set CPU port to 5 I noticed port 8 is not accessible anymore. It was just a development process but it seems like something worth fixing anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix HG556a C buttondani2016-07-241-1/+1
| | | | | | | One button of the HG556a-C has the wrong GPIO pin defined in the dts file, fix it Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
* ramips: unify etc/board.d/01_leds configurationP.Wassi2016-07-241-2/+2
| | | | | | | Introduce an optional parameter at the local set_usb_led and set_wifi_led function such that they can take a triggering device. If no parameter is passed, behaviour is unchanged. Signed-off-by: P.Wassi <p.wassi@gmx.at>
* ar71xx: add support for gl-mifiZhao Gang2016-07-2410-0/+148
| | | | | | | This add initial support for gl-mifi. Product page: http://www.gl-inet.com/mifi/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ramips: dch-m225 don't have ethernet. default enable wifiMichael Lee2016-07-241-0/+21
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: remove indentation in etc/board.d/01_ledsPaul Wassi2016-07-241-1/+1
| | | | | Remove indentation at end of line in base-files/etc/board.d/01_leds Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ramips: add missing i2s aliasJohn Crispin2016-07-241-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: clean up legacy-devices.mkMatthias Schiffer2016-07-272-322/+407
| | | | | | | | | Several legacy images were not buildable because of missing profile definitions in legacy-devices.mk since MultiProfile was removed. Update legacy-devices.mk to provide all necessary profiles, and change ordering to match legacy.mk. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mvebu: limit image builds to profile selectionFelix Fietkau2016-07-261-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove cpio.gz and tar.gz from regular filesystem typesFelix Fietkau2016-07-251-3/+0
| | | | | | | They are not used to produce regular firmware images anyway. Instead, call their build templates directly if enabled in the config Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: remove shell calls from legacy ubi/ubifs image codeFelix Fietkau2016-07-251-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: fix UBIFS_OPTS variable in image buildFelix Fietkau2016-07-251-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: fix atheros PCIe cards on the MR24Christian Lamparter2016-07-251-9/+12
| | | | | | | | | | | | | | | The consolidation of the MR24 and WNDR4700 subtargets into the nand subtarget broke MR24's atheros wlan. This was because the wndr4700's board code used a pci_fixup routines to supply the ath9k module with the calibration data. This is not necessary on the MR24 as it has standard mini-pcie ports. Hence the two AR9380 mini-pcie cards do not need any calibration data overrides. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: use lzma compression for the initramfs imagesChristian Lamparter2016-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | The MR24's u-boot takes it sweet time decompressing the LZMA-packed initramfs image. A user reported that compared to the old gzip method in v2: it "takes a ton longer to decompress like 4\x the old boot time for decompression". This patch also fixes a issue with the WNDR4700's initramfs image getting to big and causing the following u-boot crash during the decompression: "Uncompressing Multi-File Image ... Error: inflate() returned -5 out-of-mem or overwrite error - must RESET board to recover" This patch fixes both issues by reverting the MR24's initramfs compression method back to gzip. And choosing to compress the initramfs within the initramfs image as LZMA by default. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tools: bring back genext2fs for apm821xxFelix Fietkau2016-07-231-4/+0
| | | | | | | | This reverts commit 8c68c104eaba65273280c7a4727fbb10ab10f5af. It is used for apm821xx, which needs ext2 (not ext4) images for some devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux: Get rid of 000-keep_initrafs_the_default.patchAlexey Brodkin2016-07-233-75/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With that patch in place for initramfs no additional options are reported for "/" partition. What's really important is missing info about sizes. Which in its turn makes opkg think that there's no space on "/" partition to install software. I understand that's a sort of corner-case, people rarely install packages on ramfs but anyways why not? Just in case that's what I see with the patch: ---------------------->8-------------------- root@lede:/# cat /proc/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0 debugfs /sys/kernel/debug debugfs rw,noatime 0 0 ---------------------->8-------------------- And without: ---------------------->8-------------------- root@lede:/# cat /proc/mounts rootfs / rootfs rw,size=256168k,nr_inodes=32021 0 0 proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0 debugfs /sys/kernel/debug debugfs rw,noatime 0 0 ---------------------->8-------------------- Note how different is entry for rootfs. And given there's no known rationale for that patch we're getting rid of it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Felix Fietkau <nbd@nbd.name>
* sunxi/pcduino3: Remove selection of absent rtl8188euAlexey Brodkin2016-07-231-1/+1
| | | | | | | | | Since commit 217a64375547 "wireless: remove rtl8188eu (staging)" there's no point in selection of the missing module. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@openwrt.org> Cc: Zoltan Herpai <wigyori@uid0.hu>
* ledtrig-usbdev: fix duplicate match detectionFelix Fietkau2016-07-231-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add ath10k firmware to profile defaults where ath10k is usedFelix Fietkau2016-07-224-33/+33
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: rework image build code for MyBook LiveFelix Fietkau2016-07-221-11/+13
| | | | | | | Eliminate redundant mkfs calls, preparation for upcoming image build core rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entryFelix Fietkau2016-07-221-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add missing default profiles for subtargetsFelix Fietkau2016-07-223-0/+41
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720Christian Lamparter2016-07-2217-1/+2129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720 hardware highlights: CPU: AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz) Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG DRAM: 256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3) NAND: 128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64) ETH: Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN) USB: 2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included) SATA: 1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA). WLAN1: Atheros AR9380 5GHz 802.11an 3:3x3 WLAN2: Atheros AR9581 2.4GHz 802.11bgn 3:3x3 SDCARD: GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host) I2C: GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor) TC654 (i2c-0 @ 0x1b - Dual PWM fan Speed controller) WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! INFO: Since this device only has a NAND chip. I opted for going with root.squashfs in a UBI volume. There's no squashfs/jffs2 image. This target produces three images. a. netgear factory image This image can be used to flash the Netgear WNDR4700 via the firmware recovery mechanism and the web admin site. The bootloader can be instructed to do a firmware recovery via the # fw_recovery command. It will start a tftp server and listen on 192.168.1.1 (the ipaddr variable in u-boot) for incoming, binary tftp clients. The firmware recovery mechanism is also started if any of the flash content which contains the kernel, device-tree definitions or the (fake)rootfs fails to verify or load. b. sysupgrade.tar image for sysupgrade An sysupgrade will replace the entire current LEDE installation with a newer version. This does include the kernel and the ubi rootfs partition. The configuration can be carried over automatically as well if desired. simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run: root@lede:~# sysupgrade sysupgrade.tar and let it reboot. Note: The devicetree flash area is NOT updated. Until the devicetree definition is stable, this can lead to all sorts of hardware detection problems! So make sure, if you experience issues: try the fw_recovery. If you are unsure whenever this affects you: test if you can reproduce your issue with the initramfs method. As it will always have up-to-date device-tree definitions. c. initramfs image for TFTP (for development and testing) To use the initramfs method, follow the following steps: 1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin" file to to the root directory of your TFTP server. 2) rename it to wndr4700.bin 3) On the WNDR4700 - Hit Enter during u-boot and insert: # tftp 400000 wndr4700.bin; run addtty; bootm 400000 - This will boot the LEDE image. Note: The default tftp server is 192.168.1.7, if you want to change it: # setenv serverip 192.168.8.7; Note2: The default address for the WNDR4700 is 192.168.1.1: # setenv ipaddr 192.168.8.8; Note: Connect you tftp server on the last LAN port (not the WAN) Note: The firmware for the USB 3.0 Host chip is not included anymore. Therefore the two USB 3.0 ports will not work without the uPD7070x-firmware package installed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: lm90 add thermal sensor interface support for device treeChristian Lamparter2016-07-222-0/+453
| | | | | | | | | | | | | | From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch: "This patch adds to lm90 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm90 DT node. Otherwise, the driver behavior will be the same." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllersChristian Lamparter2016-07-221-0/+1037
| | | | | | | | | | | | | | | | | | | This patch adds a hwmon driver for the Microchip TC654 and TC655 Dual SMBus PWM Fan Speed Controllers with Fan Fault detection. The chip is described in the DS2001734C Spec Document from Microchip. It supports: - Shared PWM Fan Drive for two fans - Provides RPM - automatic PWM controller (needs additional NTC/PTC Thermistors.) - Overtemperature alarm (when using NTC/PTC Thermistors) The TC654 is used by the Netgear WNDR47X0 to control its system fan. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Western Digital MyBook Live SeriesChristian Lamparter2016-07-2220-2/+1006
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7Christian Lamparter2016-07-221-0/+1088
| | | | | | | | | | This patch fixes the sata_dwc_460ex SATA driver which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: dw_dmac: backport fixes and cleanups from 4.7Christian Lamparter2016-07-224-0/+2303
| | | | | | | | | | This patch fixes the dw_dmac dma engine which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Cisco Meraki MR24Chris Blake2016-07-2215-10/+722
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 19:16:58 +0000