aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar8216: define all switch_addr structs as constJohn Crispin2015-01-172-6/+6
| | | | | | | | Define all switch_addr structs as const. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44002
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-178-0/+152
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ramips: fix tx bql related race condition in the ethernet driverFelix Fietkau2015-01-171-4/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43995
* ralink: add support for Kingston MLWG2John Crispin2015-01-177-0/+134
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43990
* Remove old P2812HNUFX dtsJohn Crispin2015-01-171-308/+0
| | | | | | | | Remove unused P2812HNUFX board definition. Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43988
* Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCKJohn Crispin2015-01-176-12/+39
| | | | | | | | Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
* lantiq: Add device tree for P2812HNUF1 and P2812HNUF3John Crispin2015-01-173-0/+472
| | | | | | | | Add device tree for P2812HNUF1 and P2812HNUF3. Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43986
* ramips: add i2c pingroup to the pinmux for rt-n14uJohn Crispin2015-01-171-1/+1
| | | | | | | | i2c pins are wired to wps a reset button Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 43985
* ramips: fix default led configuration for rt-n14uJohn Crispin2015-01-171-2/+2
| | | | | | | | use new helper function to generate default led configuration Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 43984
* ar71xx: fix board detection for TP-LINK TL-WA860REJohn Crispin2015-01-171-0/+3
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 43983
* bcm53xx: drop hacky patch making bcma init laterRafał Miłecki2015-01-162-84/+0
| | | | | | | | | | | | The only reason this patch was helping was moving bcma init *after* of_serial init. It was a bit of luck because both drivers use device_initcall. It isn't really a correct way to provide early logging. Now we have earlyprintk support in bcm53xx we can drop this patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43981
* brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)Rafał Miłecki2015-01-1616-18/+1446
| | | | SVN-Revision: 43979
* mvebu: fixups for the new driverImre Kaloz2015-01-161-3/+3
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43978
* mvebu: add the new tlc59116 driver and migrate the Mamba to itImre Kaloz2015-01-154-531/+401
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43975
* ar71xx: fix disable_irq() on chained irq handlersFelix Fietkau2015-01-151-0/+93
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43974
* kernel: fix disable_irq() on MIPS CPU IRQsFelix Fietkau2015-01-152-0/+40
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43973
* bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)Rafał Miłecki2015-01-146-24/+192
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43972
* malta: copy initramfs imagesImre Kaloz2015-01-141-0/+5
| | | | | | | | | Malta ramdisk images are no longer copied to output due to a recent change. This change reimplements copying of ramdisk images for Malta builds. Signed-off-by: Eric Schultz <eschultz@prplfoundation.org> SVN-Revision: 43970
* mvebu: Switch to the generic mkuimage macroImre Kaloz2015-01-141-6/+3
| | | | | | | | | | | The mvebu image makefile define something almost identical to the generic implementation found in include/image.mk. Switch to this implementation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> SVN-Revision: 43969
* mvebu: Replace the padjffs2 call by the generic definitionImre Kaloz2015-01-141-1/+1
| | | | | | | | | The mvebu image Makefile directly calls the padjffs2 utility, while there's an generic make function to do just that. Switch to it Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> SVN-Revision: 43968
* bcm53xx: enable earlyprintk on more devicesRafał Miłecki2015-01-144-46/+142
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43965
* bcm53xx: enable HIGHMEM to support more than 128 MiB of RAMRafał Miłecki2015-01-142-0/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43964
* bcm53xx: refresh configsRafał Miłecki2015-01-142-6/+4
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43963
* ramips: add missing -Os cflag for mt7621Felix Fietkau2015-01-131-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43954
* ramips: use a larger number of rx descriptors on mt7621 to work around rx ↵Felix Fietkau2015-01-131-0/+4
| | | | | | | | overrun related packet loss Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43953
* ramips: remove interrupt coalescing, it is unnecessary with napi polling and ↵Felix Fietkau2015-01-137-78/+40
| | | | | | | | could reduce throughput Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43952
* now that the driver knows it, use the 88e6172's switch type in the mamba dtsImre Kaloz2015-01-121-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43945
* target/uml: add missing config symbolsNicolas Thill2015-01-112-0/+2
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 43940
* mvsw61xx: track and set per-VLAN port state in STULuka Perkov2015-01-112-7/+32
| | | | | | | | | | Since the driver doesn't know anything about (M)STP we just hard-set the ports to be enabled if they are part of the VLAN. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43938
* mvsw61xx: clean up and expand register definitionsLuka Perkov2015-01-112-29/+50
| | | | | | | | | | | | | | | | - eliminate MV_CPUPORT; not necessary since we define the CPU port(s) via Device Tree - add STU and expand VTU operations - update register names to match those of 88E61xx rather than mvswitch's 88E6060 - use more consistent formatting Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43937
* mvsw61xx: rework chip recognitionLuka Perkov2015-01-112-10/+31
| | | | | | | | Recognizes 88E6171/6172/6176 at the moment. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43936
* mvsw6171: rename to 'mvsw61xx'Luka Perkov2015-01-1113-142/+142
| | | | | | | | | In preparation for properly supporting switches beyond the 88E6171. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43935
* kernel: update 3.14 to 3.14.28Luka Perkov2015-01-115-14/+14
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43929
* mcs814x: switch to 3.14 kernelFlorian Fainelli2015-01-101-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43927
* mcs814x: add 3.14 kernel supportFlorian Fainelli2015-01-1044-0/+3971
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43926
* mcs814x: account for dtb output directory differencesFlorian Fainelli2015-01-101-1/+7
| | | | | | | | | 3.3 produced *.dtb files in arch/arm/boot/ while 3.14 will produce those in arch/arm/boot/dts/, adjust the image makefile accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43925
* mcs814x: set low_mem feature flagFlorian Fainelli2015-01-101-1/+1
| | | | | | | | | Most of the devices we support have between 16MiB and 32MiB of RAM available. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43924
* mcs814x: rename config-default to config-3.3Florian Fainelli2015-01-101-0/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43923
* sunxi: change bananapro DTS to use the already published patch, clean up ↵Zoltan Herpai2015-01-102-77/+86
| | | | | | | | 3.18 config of generic symbols Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43922
* ar71xx: fix console string in imagesFelix Fietkau2015-01-101-2/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43917
* imagebuilder: fail with error if the passed profile name does not existJo-Philipp Wich2015-01-101-0/+8
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 43916
* adm5120: add experimental 3.14 kernel supportFlorian Fainelli2015-01-10115-0/+15096
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43915
* adm5120: move files to files-3.8Florian Fainelli2015-01-1099-0/+0
| | | | | | | | In preparation for adding new kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43914
* kernel: add missing config symbols for 3.18Zoltan Herpai2015-01-101-0/+18
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43912
* ar71xx: port wndr3700/3800 to the new image building codeFelix Fietkau2015-01-101-10/+76
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43910
* ar71xx: port carambola2 to the new image building codeFelix Fietkau2015-01-101-2/+24
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43909
* ramips: convert mt7621 images to new image building codeFelix Fietkau2015-01-101-29/+43
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43908
* ramips: simplify mkimage kernel loadaddr/entry handlingFelix Fietkau2015-01-101-16/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43906
* sdk: track files with git and use it to implement proper clean targetsJo-Philipp Wich2015-01-101-3/+16
| | | | | | | | | | | | Initialize a Git repository in the SDK and use git reset / git clean to rollback any SDK changes with "make clean" or "make dirclean". This approach is more robust than nuking entire directory trees because some parts of them might have been shipped with the original archive. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 43904
* sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, ↵Zoltan Herpai2015-01-0910-123/+334
| | | | | | | | mele_m9 support Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43900
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 06:16:27 +0000