aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: suppress osafeloader info error messages during flashingFelix Fietkau2017-01-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix unaligned access in xrx200_poll_rx()Alexander Couzens2017-01-301-2/+2
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ledtrig-netdev: don't cancel work on events for different interfacesSergey Sergeev2017-01-291-3/+3
| | | | | | | | | This fixes logic bug(in function netdev_trig_notify) introduced in 0b2991a8ed32b5d9ba0a7c3441a72e1c1a1c4fde commit. Events triggered by different interfaces were stopping work queue so it wasn't working for tx/rx mode. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ar71xx: add missing DEVICE_TITLE for mikrotik devicesFelix Fietkau2017-01-291-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2FUKAUMI Naoki2017-01-281-1/+1
| | | | | | "pad-rootfs" is required just after "append-rootfs". Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
* mxs: remove stale references to obsolete kernel module packagesMichael Heimpold2017-01-284-12/+4
| | | | | | | Commit 29443e2 (mxs: remove modules.mk, select drivers in the kernel config) missed to remove these references, so cleanup it now. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* kernel: make BCM54210E PHY code work with 4.4Rafał Miłecki2017-01-281-3/+5
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport BCM54210E PHY supportRafał Miłecki2017-01-281-3/+73
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: fix brnImage signature for the VGV7510KW22BRN imagesMathias Kresin2017-01-281-2/+2
| | | | | | | | The VGV7510KW22BRN and VGV7519BRN do not have the same brnImage signature. It was accidentally changed with ba42c1d ("lantiq: un-macro the image building code"). Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump to 4.4.45Koen Vandeputte2017-01-273-5/+5
| | | | | | | | Refreshed patches for all supported targets. Compiled & tested on cns3xxx & imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "ar71xx: fix Archer C7 LED colour names"Mathias Kresin2017-01-271-4/+4
| | | | | | | | | | | This reverts commit e79ecb4c26471526552d2473bb50d331c3dafb87. The commit was incomplete and the issue that should be fixed isn't that easy fixable. The Archer C7 mach file is used for the Archer C5, WDR4900 and WDR7500 as well. Where the WDRs in compare to the Archer do have blue LEDs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ixp4xx: put apex images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the apex images into the kernel build directory as this directory might get removed after kernel updates while the apex packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mxs: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* oxnas: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-1/+1
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sunxi: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: put u-boot and ucode images into image staging directoryJo-Philipp Wich2017-01-271-3/+3
| | | | | | | | | | | | Do not put the u-boot and ucode images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mvebu: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-1/+1
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing u-boot images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: introduce STAGING_DIR_IMAGEJo-Philipp Wich2017-01-271-0/+3
| | | | | | | | | | | Introduce a new location STAGING_DIR_IMAGE which is intended to be used by bootloader iamges and similar image-related artifacts. This directory is guaranteed to be persistent across kernel upgrades which might involve a removal of KERNEL_BUILD_DIR and is guranteed to be bundled with the image builder. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imx6: fix build errorKoen Vandeputte2017-01-271-0/+1
| | | | | | This symbol is required when symbol SOC_IMX6 is also specified Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: refresh kernel configKoen Vandeputte2017-01-271-1/+0
| | | | | | | This key got moved to generic in commit: 7480d3309cbe40378da48c3b6decc4ba2b1fc3d5 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: split up 980-arm_openwrt_machtypes.patch and move to target foldersFelix Fietkau2017-01-273-15/+16
| | | | | | This is only required for non-DT platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Kernel: bump to 4.4.44Stijn Segers2017-01-2715-109/+62
| | | | | | | | Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64. .44 has been run-tested on the 17.01 branch here on ar71xx and mt7621. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* x86/64: Enable GPIO sysfs & GPIO LED supportChris Blake2017-01-271-0/+9
| | | | | | | | The following changes enables GPIO sysfs as well as the LEDS_GPIO option within the kernel. This is required to enable LEDs over a GPIO interface. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ramips: cleanup mt7620 Netgear image codeJoseph C. Lehner2017-01-273-17/+9
| | | | | | | 1. Reuse functions defined in `image-commands.mk` 2. Rename fakeroot image Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* build: move append-file to image-commands.mkJoseph C. Lehner2017-01-271-4/+0
| | | | | | | Move it append-file to image-commands.mk so that it can used by other targets as well. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: enable rlt8366s Green Feature for F5D8235 V1Tobias Wolf2017-01-271-0/+2
| | | | | | Enable the green feature for the board by default. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* generic: rtl836x: add support for Green FeatureTobias Wolf2017-01-271-62/+198
| | | | | | | | The GPL licensed source code of Belkin contains an ASIC based "Green Feature". This change adds support for this Green Feature that can be activated with an DTS option or swconfig. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* ramips: add rlt8366s initvals to the F5D8235 V1 DTSTobias Wolf2017-01-271-0/+39
| | | | | | | | | | Before this change only port 4 of F5D8235 V1 worked at 1000Mpbs. Comparing the current driver with the GPL_BELKIN_F5D8235-4_v1000 v1.01.24 sources showed that additional steps are required to set-up the rlt8366s switch correctly. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* generic: rtl8366s: add support support for initvals from DTSTobias Wolf2017-01-271-2/+27
| | | | | | | This change provides the possibility to define per-device initvals in the DTS file for a rlt8366s switch. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* ar71xx: fix Archer C7 LED colour namesMathias Kresin2017-01-271-4/+4
| | | | | | | | All LEDs on this board are green. Fixes: FS#409 Signed-off-by: Mathias Kresin <dev@kresin.me>
* generic: keep module aliases inside .modinfoYousong Zhou2017-01-262-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems module aliases are actually essential info. E.g. other modules may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the kernel will request user mode modprobe helper for ipt_hashlimit and ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko Compile-tested for armvirt, there is nearly no size impact. Before -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:07 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums After -rw-r--r-- 1 yousong yousong 304 Jan 10 17:37 config.seed -rw-r--r-- 1 yousong yousong 1634 Jan 11 11:10 lede-armvirt-default.manifest -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs drwxr-xr-x 2 yousong yousong 4096 Jan 10 17:35 packages -rw-r--r-- 1 yousong yousong 739 Jan 10 17:37 sha256sums Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb powerVitaly Chekryzhev2017-01-262-0/+22
| | | | | | Export gpio usb to allow power management of USB port. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: ZyXEL Keenetic Viva: align factory imagesVitaly Chekryzhev2017-01-261-1/+1
| | | | | | ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: ZyXEL Keenetic Viva: export gpio usb powerVitaly Chekryzhev2017-01-261-0/+11
| | | | | | Export gpio usb to allow power management of USB port. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ramips: add ip17xx support to WLI-TX4-AG300NYo Abe2017-01-261-0/+1
| | | | | | | | | ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which should be included by default. Signed-off-by: Yo Abe <abe.geel@gmail.com> [Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix EX2700 wireless macJoseph C. Lehner2017-01-261-13/+11
| | | | | | | | On some EX2700 devices, the MAC address from the eeprom data differs from the actual MAC address. Fix that, and cleanup the DTS file while we're at it. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* kernel: update Broadcom PHY driversRafał Miłecki2017-01-264-0/+700
| | | | | | | This commit adds 4 patches, one per kernel version that was used for picking updates. This adds support for few new PHYs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: add support to TP-Link Archer C59v1 and C60v1Henryk Heisig2017-01-2615-0/+460
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: QCA956X: add missing registerHenryk Heisig2017-01-266-4/+66
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mappingQian Zheng2017-01-261-2/+5
| | | | Signed-off-by: Qian Zheng <sotux82@gmail.com>
* ar71xx: fix netgear wnr2000 v3 switch port mappingQian Zheng2017-01-261-2/+2
| | | | | | Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order after merging with gl-ar300 case] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: fix tl-wr841n-v7 switch port mappingQian Zheng2017-01-261-1/+5
| | | | | | Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imagebuilder: properly escape single quotes in device titlesJo-Philipp Wich2017-01-261-1/+1
| | | | | | | | | | | | | The name "Plat'Home OpenBlocks AX3" causes the imagebuilders "make info" command to fail with: bash: -c: line 0: syntax error near unexpected token `(' bash: -c: line 0: `echo; [...]' Makefile:99: recipe for target '_call_info' failed Properly escape single quotes to avoid breaking the echo commands. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm53xx: disable building Linksys EA6300 V1 imageRafał Miłecki2017-01-251-1/+2
| | | | | | | This device has 2 TRX partitions (main one and failsafe one) and Linux may not detect them properly failing to run userspace. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: update the ethernet compat stringJohn Crispin2017-01-255-6/+6
| | | | | | | mt2701 is an earlier version of the ip core, so use that compat string as baseline. Signed-off-by: John Crispin <john@phrozen.org>
* x86: fix sysupgrades on disks with 4k block sizeFelix Fietkau2017-01-251-9/+2
| | | | | | | Even when the disk uses 4k blocks, the partition table still uses units of 512 byte sectors. Always use ibs=512 for the offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix mikrotik subtarget default profile for device profile selectionAlex Samorukov2017-01-251-0/+1
| | | | Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* ar71xx: improve Mikrotik hAP Lite device supportAlex Samorukov2017-01-253-4/+5
| | | | | | | | - remove CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - enable jffs2 support - fix sysupgrade Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* mxs: fix image build issuesFelix Fietkau2017-01-251-2/+2
| | | | | | | stage u-boot images in KERNEL_BUILD_DIR for building images always select uboot-mxs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: backport arch patch with Luxul devices supportRafał Miłecki2017-01-242-14/+260
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>