aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix giving extra arguments to Build/mktplinkfwJohn Crispin2016-04-211-13/+14
| | | | | | | | | | | | | | The build command will always get the whole argument string in $(1), regardless of whitespace. We need to use word/wordlist to split the string after the first word. Whitespace and quotation will be given to the command verbatim (make will ignore it), so to give multiple arguments, no quotation marks may be used. Fixes: r47174 ("ar71xx/image: add options argument to mktplinkfw step") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49216
* ramips: Add support for ZBT WG3526John Crispin2016-04-217-1/+153
| | | | | | | | | | | | | | | | | | The WG3526 is the follow-up to the 2626 and is mostly the same, with the excaption that the mt7602 has been replaced with the mt7603. The internal wifi setup has also changed slightly. Based on my tests, everything that worked on the 2626 works on the 3526 and with roughly the same performance. v1->v2: * Remove some references to 2626 that I had missed in the dts. v2->v3: * Update patch to match new file structure. * Removed SD driver to be consistent with other MT7621 targets. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> SVN-Revision: 49213
* ramips: awake rt305x USB controllerJohn Crispin2016-04-211-0/+15
| | | | | | | | | | | | | Because of Ralink uboot set USB controller into sleep mode [1] we check it and awake controller before any registers access. Fix ticket #21396 [2] [1] http://marc.info/?l=linux-usb&m=137398626102108&w=2 [2] https://dev.openwrt.org/ticket/21396 Signed-Off-By: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 49212
* ramips: add support for ELECOM WRH-300CRJohn Crispin2016-04-218-2/+172
| | | | | | | | | | | | | | ELECOM WRH-300CR is MT7620N based very small Wi-Fi router with 64MiB DDR2 SDRAM, 16MiB SPI Flash, one fast ethernet port, and (internal but easy-to-access) UART. it also has internal USB hub and USB card reader which provide one USB port, one SD card slot, and one microSD card slot. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> SVN-Revision: 49211
* lantiq: use new image build process for some imagesJohn Crispin2016-04-211-90/+95
| | | | | | | | | | This adds for some easy images the new build process. This was only tested on some TP-Link devices, please test. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49210
* ramips: update DTS file for Planex DB-WRT01John Crispin2016-04-211-1/+1
| | | | | | | | update DTS files to use jedec,spi-nor compatible string for m25p80 to fix probe issues. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49209
* bcm53xx: bump maximum TRX size for devices with serial flashRafał Miłecki2016-04-201-0/+1
| | | | | | | | | It was already increased for NAND devices so do the same for the ones with serial memory. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49207
* ramips: fix support Planex MZK-750DHP.John Crispin2016-04-205-4/+41
| | | | | | | | | | fix script for Planex MZK-750DHP. modification of the GPIO definition. add Profile. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49205
* ramips: rt3352 usbphy fix in dts-fileJohn Crispin2016-04-201-1/+8
| | | | | | | | Add missing rt3352 usb phy. Fix ticket #20499. Signed-Off-By:Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 49204
* oxnas: clean-up and improve profilesHauke Mehrtens2016-04-192-7/+10
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49198
* oxnas: add support for Akitio MyCloud miniHauke Mehrtens2016-04-197-3/+166
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49197
* imx6: images: add bootfs.tar.gz build artifactLuka Perkov2016-04-191-1/+30
| | | | | | | | | | In order to create a bootable block storage device, both bootfs and rootfs tarballs are required. However, our current scheme does not export a bootfs tarball so add the packaging of it here. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 49196
* ar71xx: add config ATH79_MACH_TL_WA901ND_V4 for kernel 4.4Hauke Mehrtens2016-04-171-0/+1
| | | | | | | | This config option was not added in commit r49158. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49195
* ar71xx: fix build errorHauke Mehrtens2016-04-172-0/+2
| | | | | | | | | | This fixes a build error introduced in r49193. This closes #22230 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49194
* ar71xx: fix build with kernel 4.4Hauke Mehrtens2016-04-172-0/+8
| | | | | | | | | | The file linux/mdio-gpio.h was moved to linux/platform_data/mdio-gpio.h in kernel 4.4 Reported-by: Arjen de Korte <arjen+openwrt@de-korte.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49193
* x86: fix platform_export_bootpart() for Xen virtual disksHauke Mehrtens2016-04-171-1/+1
| | | | | | | | | | | | | Virtual disk devices in a Xen virtual machine (DomU) can be /dev/xvda, /dev/xvdb and so on with partitions like /dev/xdva1. Devices named like this where not considered before. This resulted in a non working sysupgrade, because the boot partition could not be found. Signed-off-by: Alexander Dahl <alex@netz39.de> Suggested-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49190
* kernel: update kernel 4.4 to version 4.4.7Hauke Mehrtens2016-04-1694-871/+176
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49176
* kernel: backport patch making bcm47xxsflash arch independentRafał Miłecki2016-04-151-0/+138
| | | | | | | | This will be needed to use bcm47xxsflash on ARM for BCM53573. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49168
* kernel: use upstream fixes for bgmac and BCM4709(4)Rafał Miłecki2016-04-156-60/+86
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49167
* bcm53xx: backport BCM5301X earlycon and USB VCC patchesRafał Miłecki2016-04-148-293/+228
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49166
* ramips: remove accidentally comitted codeJohn Crispin2016-04-091-95/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 49161
* bcm53xx: add switch config workaround for R8500 and DIR-885LRafał Miłecki2016-04-091-1/+4
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49160
* bcm53xx: fix regression in generating network configRafał Miłecki2016-04-091-3/+4
| | | | | | | | Syntax error was added in r49122. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49159
* ar71xx: add TP-Link TL-WA901ND-v4 supportJohn Crispin2016-04-0911-1/+144
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 49158
* ar71xx: add support for Compex WPJ342John Crispin2016-04-0913-0/+218
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 49157
* ar71xx: fix nondeterministic hangs during bootconsole/console handoverJohn Crispin2016-04-092-0/+108
| | | | | | | | | | | | | | | | | Reconfiguring the UART when the FIFO is not empty may cause the boot to hang. This hang is extremely suspectible to timing differences; recompiling the kernel with the same configuration, but different UTS_VERSION timestamps can yield images that hang more or less often. Sometimes images are produced that hang reproducibly. This patch should also make it into one of the next linux-stable releases, but it's better to get this fixed as soon as possible. Fixes #21773, #21857. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49156
* ar71xx: add OM5P-ACv2 to the OM5P-AC profileJohn Crispin2016-04-091-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49155
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-091-1/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49154
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACv2John Crispin2016-04-092-2/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49151
* ar71xx: add user-space support for the OpenMesh OM5P-ACv2John Crispin2016-04-092-1/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49150
* ar71xx: add kernel support for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-096-0/+230
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49149
* ar71xx: create profile and build image for the OpenMesh OM5P-AC boardJohn Crispin2016-04-092-1/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49148
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-AC boardJohn Crispin2016-04-091-0/+4
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49147
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACJohn Crispin2016-04-092-3/+10
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49144
* ar71xx: add user-space support for the OpenMesh OM5P-ACJohn Crispin2016-04-093-0/+11
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49142
* ar71xx: add kernel support for the OpenMesh OM5P-AC boardJohn Crispin2016-04-096-0/+206
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49141
* lantiq-dsl: add missing blank in dsl outputJohn Crispin2016-04-091-1/+1
| | | | | | | | blank inserted before ACTATP Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49137
* lantiq-dsl: bugfix latency values swapped for lucistatJohn Crispin2016-04-091-2/+2
| | | | | | | | swapped wrong latency output Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49136
* lantiq-dsl: bugfix db negative sign after commaJohn Crispin2016-04-091-1/+1
| | | | | | | | If db is negative minus sign was shown after comma Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49135
* arc770: enable unaligned access handling simulation in softwareJohn Crispin2016-04-092-2/+34
| | | | | | | | | | | | This enables misaligned access handling by software in Linux kernel. With some wireless drivers (ath9k-htc and mt7601u for example) we see misaligned accesses here and there and to cope with that without fixing stuff in the drivers we're just gracefully handling it on ARC. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 49134
* arc770: build kmod-ath9k-htc wpad-mini by defaultJohn Crispin2016-04-092-2/+2
| | | | | | | | | | | | | | | | AXS101 beind a development board lacks built-in wireles inerfaces. So we have to use external USB dongles to turn the board into wireless router. The best USB Wi-Fi dongles to work in AP-mode seem to be based on ath9k-htc chipset. And so with that change we add support of mentioned dongles in default and axs101 builds. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 49133
* mediatek: update patchesJohn Crispin2016-04-0978-4145/+72
| | | | | | | | adds a few ethernet fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 49132
* ramips: Disable the SD driver by default on MT7621John Crispin2016-04-094-4/+4
| | | | | | | | | | | | | | | | The SD driver has been a long and dragging issue on the MT7621 platforms as it hasn't worked for months resulting in unbootable devices. Until it's fixed, disable it in the default profiles. Reports / Discussed here: https://dev.openwrt.org/ticket/21392 https://dev.openwrt.org/ticket/21834 https://dev.openwrt.org/ticket/21995 https://forum.openwrt.org/viewtopic.php?id=59092 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49131
* ramips: Fixes for LinkIt 7688John Crispin2016-04-093-1/+78
| | | | | | | | | | | | | Misc fixes for LinkIt 7688 board: - Copy the right wireless firmware for the mt7688 - Add back '0065-mt7688-fixes.patch', left out after the move to Linux 4.4. - Remove SPI_DEV from linux config which otherwise causes a massive warning - Add wmac to LINKIT7688.dts so wireless works Signed-off-by: Adam Kent <adam@semicircular.net> SVN-Revision: 49130
* ramips: Adjust image size limit for the D-Link DIR-860L B1John Crispin2016-04-092-0/+96
| | | | | | | | | | Currently the maximum image size defaults to 8Mbyte even though this model has 16Mbyte of flash memory. Tested and works on my device. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49129
* ramips: fix for Planex MZK-WDPR (lcd control gpio).John Crispin2016-04-091-0/+10
| | | | | | | | | add lcd control gpio pin for Planex MZK-WDPR. LCD board initial timming is GPIO control. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49128
* ramips: mt7621: fix Ubiquiti EdgeRouter X profileJohn Crispin2016-04-091-1/+2
| | | | | | | | Remove unnecessary packages to reduce image size so it fits in initramfs (to enable upgrading from factory firmware). Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49127
* ramips: mt7621: sync MQmaker WiTi profile name to dts nameJohn Crispin2016-04-091-3/+3
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49126
* ramips: enable device profiling by dtsJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49125
* ramips: mt7621: add a device to TARGET_DEVICES after it's definitionJohn Crispin2016-04-091-4/+12
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49124
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 10:24:38 +0000