aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493GJoão Chaínho2017-12-141-4/+4
| | | | | | | This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* apm821xx: use x86's upgrade scripts for MyBook LiveChristian Lamparter2017-12-142-19/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | Advantages: - preserves existing partition layout. On the hard-drive. Only the boot and rootfs partition will be overwritten. Disadvantages: - The upgrade process takes much longer to run. from 2-3 seconds to 15-25 seconds. Please note that sysupgrade will refuse to upgrade, if the existing installation has an incompatible partition layout. Future changes to the bootfs and/or rootfs partition size will likely cause breakage to the sysupgrade procedure. In these cases, the ext4-rootfs.img.gz has to be written manually onto the disk. Please don't forget to backup your configuration in this cases. Note2: This patch requires "base-files: upgrade: make get_partitions() endian agnostic" Note3: If your current installation does not host the two changes, sysupgrading will wipe the existing partition layout. Don't forget to backup your data! Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MyBook Live convert to DT PHYChristian Lamparter2017-12-142-0/+12
| | | | | | Changes MyBook Live to use DT PHY probing and the broadcom phy driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: convert to dt based diag LED scriptChristian Lamparter2017-12-145-31/+49
| | | | | | | | | | | Please note that users with a Netgear WNDR4700 will need to update the device-tree partition manually. For instructions, please refere to commit 49856a4bb581 ("apm821xx: make it possible to update the dtb partition on the WNDR4700") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: unify get_dt_led helper functionChristian Lamparter2017-12-145-40/+14
| | | | | | | | | | | | | | Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm63xx: fix an OOPS when accessing the basemode register on 6368Jonas Gorski2017-12-131-1/+1
| | | | | | | | | | The bcm6368 pinctrl driver passed the wrong variable to devm_regmap_field_alloc, causing it to blow up when later trying to access the field. Fixes #1211. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: fix lzma-loader build with glibcJonas Gorski2017-12-131-1/+1
| | | | | | | | | | | | | | | | For an unknown reason gcc tries to link in crti.o when building with a glibc toolchain (this does not happen with other targets). Prevent this by telling gcc explicitly to not do that. Fixes the following build error: /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x18): relocation truncated to fit: R_MIPS_GOT16 against `__gmon_start__' /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x28): relocation truncated to fit: R_MIPS_CALL16 against `__gmon_start__' collect2: error: ld returned 1 exit status Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* treewide: add only one device when appending to TARGET_DEVICESLuis Araneda2017-12-1210-50/+216
| | | | | | | | | This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: fix board detection with newer RouterBOOT versionsGabor Juhos2017-12-122-0/+86
| | | | | | | | | | | | | | | Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD) use "Board=" kernel parameter instead of "board=" to pass the board name to the kernel. Due to this change the board detection code is not working on the devices shipped with the new RouterBOOT version. Because the kernel is unable to identify these boards they become unusable despite that they are supported by the current code. Update the prom_init code to convert the 'Board' kernel parameter to 'board'. After this change, the board detection works also with the new RouterBOOT versions. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* brcm47xx: remove versions from linksys-e1000 targetMoritz Warning2017-12-111-2/+2
| | | | | | | | | | The target name does not need to included a revision if all revisions are supported. This target supports all revisions (v1, v2, v2.1). Signed-off-by: Moritz Warning <moritzwarning@web.de> [Keep the version numbers in the device title, it doesn't harm] Signed-off-by: Mathias Kresin <dev@kresin.me>
* brcm47xx: use proper region code in image nameMoritz Warning2017-12-111-9/+9
| | | | | | | Replace 'north-america' by 'na' and remove 'other-regions' in image files for Netgear WGR614 v10. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* lantiq: dgn3500 drop worldwide suffixMathias Kresin2017-12-111-6/+6
| | | | | | | | | | Remove the WW suffix, everything without a region suffix is world wide anyway. While at it, normalise the image filenames by using only lower case characters. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: nand: drop ubifs imagesMathias Kresin2017-12-112-2/+2
| | | | | | | | | | | | | | | Users are confused which image type they should use and there are more drawbacks than adavantages in using a r/w ubifs rootfs in constrast to a read-only squashfs rootfs like: - less available free flash space due to better compression of squashfs images - no support for factory reset due to r/w filesystem - possibility to break failsafe due to r/w filesystem Therefore, drop support for r/w ubifs rootfs images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix a typo in 02_networkPavel Kubelun2017-12-081-1/+1
| | | | | | | The typo in network defaults script in ramips target that prevents defaults to initialize. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ar71xx: remove nand_board_name platform overrideMathias Kresin2017-12-081-9/+0
| | | | | | | The boardname isn't used any longer to find the subdirectory in the sysupgrade tar archive, which makes this override useless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: MIPS compile out no-op DMA mapping ops where possibleFelix Fietkau2017-12-083-1/+173
| | | | | | Slightly improves networking throughput on some devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ag71xx: Reduce NAPI weight to 32.Rosen Penev2017-12-081-1/+6
| | | | | | | | | | | | | | Qualcomm claims this reduces cache misses. Original commit message below: From: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Date: Tue, 11 Jun 2013 12:18:46 -0500 Subject: [ag71xx] reduce NAPI weight In an attempt to increase our cache warmth, we are decreasing NAPI. This increases the warmth of the reused SKBs. Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Revert "ag71xx: Switch from driver to kernel macro for NAPI_WEIGHT."Rosen Penev2017-12-083-6/+7
| | | | | | The motivation for this was misguided. It turns out tuning the NAPI weight could be useful for testing purposes. Therefore reverting. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* merge: etc: update remaining filesZoltan HERPAI2017-12-082-2/+2
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: ssid: update default ssidZoltan HERPAI2017-12-081-1/+1
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: targets: update image generation and targetsZoltan HERPAI2017-12-0817-36/+37
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: C58/C59 fix LAN1 working incorrectlyDavid Bauer2017-12-081-1/+1
| | | | | | | This commit fixes LAN Port 1 not transferring data in case no other LAN Port has active link-state on TP-Link Archer C58/C59. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 4.9 to 4.9.67Stijn Tintel2017-12-0723-387/+21
| | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - generic/190-1-5-e1000e-Fix-error-path-in-link-detection.patch - generic/190-3-5-e1000e-Fix-return-value-test.patch - generic/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch - generic/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - ramips/0102-MIPS-ralink-Fix-MT7628-pinmux.patch - ramips/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function Update patches that no longer apply: - layerscape/815-spi-support-layerscape.patch - ramips/0099-pci-mt7620.patch Compile-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Runtime-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1Zoltan HERPAI2017-12-066-0/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | This is a variant of the MT7620N-based Asus routers. Specifications: - MT7620N (580 MHz) - 32 MB RAM - 8 MB Flash - 5x 10/100Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas - UART (J2) header on PCB (115200 8n1) Flash instructions: 1. Configure PC with static IP 192.168.1.75/24 2. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds. All 4 LEDs will start to blink, which is when the router will accept firmware files via TFTP. No known limitations on firmware filenames, just send it with a TFTP client to 192.168.1.1. 3. Router will download file from server, write it to flash and reboot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sdk: restrict base feed repo to public git for CONFIG_BUILDBOT onlyRafał Miłecki2017-12-051-1/+2
| | | | | | | | This allows people to build SDK from custom repository (git access using ssh) and keep original URL in SDK's feeds.conf.default. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add missing reset button for Nexx WT1520INAGAKI Hiroshi2017-11-281-9/+15
| | | | | | | | | | | | | This commit adds missing the GPIO key used as reset button. Nexx WT1520 has a GPIO key for factory reset, but it's not defined in WT1520.dtsi and cannot use it. Drop the UART (full) from the device tree source file, it was never used for this board. Adjust the kernel bootargs accordingly. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [add note about dropped UART (full) to the commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: Update kernel 4.4 to 4.4.100Rosen Penev2017-11-2514-24/+24
| | | | | | Run-tested on ramips Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 4.9 to 4.9.65Stijn Tintel2017-11-244-208/+186
| | | | | | | | Refresh patches. Compile-tested: ar71xx, octeon, x86/64. Runtime-tested: ar71xx, octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: remove support for kernel 4.4Hauke Mehrtens2017-11-2328-4295/+0
| | | | | | | Kernel 4.9 is working good on this target, remove support for kernel 4.4 now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: backport sunxi-mmc controller driver from 4.13Hauke Mehrtens2017-11-231-0/+288
| | | | | | | There are multiple problems on the A64 SoC with the older drivers which are fixed in the upstream kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Hyper-V PCI pass throughLucian Cristian2017-11-221-1/+1
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* kernel: add 32bit x86 HYPER-V supportLucian Cristian2017-11-221-0/+19
| | | | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [refresh config] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.9 to 4.9.63Koen Vandeputte2017-11-2263-3193/+1593
| | | | | | | | | | | Refreshed all patches. Removed upstreamed parts. Compile-tested: cns3xxx, imx6, mvebu, layerscape Run-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: use pinmux nodes from dtsiMathias Kresin2017-11-2215-132/+32
| | | | | | | Use the pinmux nodes from the included dtsi file instead of adding duplicate nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing pinmuxes to SoC dtsiMathias Kresin2017-11-225-2/+58
| | | | | | | Add pinmuxes defined by some board which are including the dtsi files to the dtsi files itself. Allows to reduce duplication. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: backport MT7628 pinmux fixesMathias Kresin2017-11-225-3/+67
| | | | | | | | | | | | According to the datasheet the REFCLK pin is shared with GPIO#37 and the PERST pin is shared with GPIO#36. While at it fix a typo inside the pinmux setup code. The function is called refclk and not reclk. Update device tree source files accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Planex CS-QR10 device packagesMathias Kresin2017-11-221-1/+3
| | | | | | | | | Add kmod-sound-core, it is a dependency of kmod-sound-mt7620 and will not be autoselected. Remove kmod-i2c-core, it will be autoselected by kmod-i2c-ralink. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix DCH-M225 supportMathias Kresin2017-11-222-2/+7
| | | | | | | | | | | | | | Setting the pins of the UARTF group to GPIO+I2S at the time the I2C driver loads is to late for the wps GPIO button. The gpio-keys driver fails to load since the pin used by the wps button is not yet set to GPIO. The wps button with the rfkill keycode is essential for this wireless only board. Add the missing sound and I2C kernel modules corresponding to the device nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ixp4xx: Update to 4.9 kernel, refresh patches. Remove kmod-spi-gpio-old usage.Ted Hess2017-11-1843-2/+9768
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* bcm53xx: use otrx for creating TRX imagesRafał Miłecki2017-11-171-6/+2
| | | | | | | | The advantage is that we don't have to specify max TRX size anymore and otrx doesn't allocate a buffer of that size. It saves us allocating 32 MiB for every image we generate. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Enable fadvise on older kernels.Rosen Penev2017-11-172-2/+2
| | | | | | Backport of 56342ee2bcbf9bf8918a01045471c7bb7faa1596 for older kernels. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: add support for NanoPi M1 Plus boardLuis Araneda2017-11-173-0/+340
| | | | | | | | | | | | | | | | | | | | | | | | Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: base files: add AP6212 (brcm43430) NVRAMLuis Araneda2017-11-171-0/+53
| | | | | | Used by the NanoPi M1 Plus board Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ipq806x: ipq4019: enable usb phyRoman Yeryomin2017-11-171-1/+1
| | | | | | Run tested on ap-dk01.2-c1 Signed-off-by: Roman Yeryomin <roman@advem.lv>
* brcm47xx: fix switch port mapping on D-Link DIR-330Antony Black2017-11-161-0/+1
| | | | | | | | D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is eth1, it's not working cus eth1 not soldered and wan port function performs 5th port of the switch. Signed-off-by: Antony Black <gtrtfm@gmail.com>
* kernel: backport a patch that allows drivers to tweak the TSQ logicFelix Fietkau2017-11-161-0/+85
| | | | | | | | | | | | | Currently local TCP performance on wifi devices can be limited because the TSQ (TCP Small Queues) code is tuned for wired ethernet latencies. With this patch drivers can increase the amount of local buffering to allow TCP to trigger larger aggregation sizes This commit is modified from the upstream version to allow #ifdef based backport feature detection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for ZBT WE3526Felix Fietkau2017-11-164-0/+130
| | | | | | | | | | | | | | | | | This is a variant of the ZBT WG3526 with a few minor modifications. The wifi chips are swapped, and there is no GPIO controllable status LED. There is also no SATA port. Specifications: - MT7621AT (880 MHz) - 512 MB RAM - 16 MB Flash (SPI NOR) - 5x 1Gbps Ethernet (built-in switch) - MT7612E 802.11ac 5 GHz WLAN - MT7603E 802.11n 2.4 GHz WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: extract board name from device tree as a fallbackFelix Fietkau2017-11-161-1/+3
| | | | | | | This makes it possible to avoid more duplication when adding support for a new board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cns3xxx: refresh kernel configKoen Vandeputte2017-11-151-6/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mvebu: backport a kernel irq fix for setting IRQ affinityFelix Fietkau2017-11-151-0/+17
| | | | | | | | The IRQ controller can only set the affinity to a single CPU. Update the mask in the controller data. Suggested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 06:04:35 +0000