aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: backport BCM5357 fix for GPIOsHauke Mehrtens2014-03-304-9/+54
| | | | | | | | | | This backports: bcma: gpio: register 32 GPIOs on BCM5357 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40347 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport 3.14 patch for nvram GPIO pin readHauke Mehrtens2014-03-301-0/+30
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: Name LEDs colors for Linksys E1000 V2.1Hauke Mehrtens2014-03-302-0/+26
| | | | | | | | | | Handle it by creating a new patch for simple database changes. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: update workarounds patch to V3Hauke Mehrtens2014-03-302-6/+18
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40344 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix chuncked-io moduleJohn Crispin2014-03-301-7/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40342 3c298f89-4303-0410-b956-a3cf2f4a3e73
* revert: kernel: rtl8306: fix max pvid & remove port isolationJohn Crispin2014-03-301-76/+37
| | | | | | | | apparently this one was nt a good idea to merge Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40330 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lntiq: add support for Astoria ARV7519RW.John Crispin2014-03-306-0/+319
| | | | | | | | | | | | | | | These patches add support for the Astoria ARV7519RW aka Livebox 2.1 The PCI and PCIe interfaces have been disabled. Also, because there are two revisions of this board with different GPHY firmwares, two targets were defined. V2: rewrote partitions to work with an u-boot specifically made for these boards. Signed off by: Esteban Benito <estebanjbs@gmail.com> Signed off by: Carles Gadea <carlesgrg@gmail.com> Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40329 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)John Crispin2014-03-301-4/+13
| | | | | | | | | | | | | | | | | | | | ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in flash as big-endian, but the driver needs it in little-endian format. We have to swab it before handing it over. This requires my earlier patch for busybox. Funnily enough, ARV752DPW works also with the incorrect eeprom, but undoubtedly unoptimally. I have a hunch that also the final remaining Lantiq board would require this swabbing, but I'm not sure, so I just swab it in the three boards that I know about. v2: * Swab also on ARV7510PW22 based on feedback from Alvaro Rojas * Fix the offset with bs=2 Signed-off-by: Matti Laakso <malaakso at elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add esiJohn Crispin2014-03-302-1/+8
| | | | | | | | http://patchwork.openwrt.org/patch/3703/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40326 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix mtd_split for brnboot firmware imagesJohn Crispin2014-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | The existing code only tries to split a parition with name "rootfs" while actually looking for kernel+rootfs, where usually "firmware" is used as a partition name. This doesn't make sense, as even if there was a partition 'rootfs' given by mtdparts or via device-tree, this code would lead to another partition called 'rootfs' being created which would not be properly distinguished in the current user-space code. While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make that configurable, the lack of users of brnboot and the fact that we can freely decide the partition name made me simply change the hard-coded string constant from "rootfs" to "firmware". (I'm going to add support for ARV7506PW which run brnboot and needs this change) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40324 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fixup ath5k supportJohn Crispin2014-03-301-0/+55
| | | | | | | | http://patchwork.openwrt.org/patch/4417/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40323 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix initial VLAN conf for P2601HNFXJohn Crispin2014-03-301-2/+3
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40321 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: P2601HNFX dts update for STP and buttonsJohn Crispin2014-03-301-3/+6
| | | | | | | | | - Set correct AltSel for STP pins - Set front button to rfkill Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40320 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add support for Arcadyan ARV7519PWJohn Crispin2014-03-305-1/+238
| | | | | | | | | | | This patch adds almost full support for this board. - WiFi is still not working - USB will not power up. According to some reports, it may be a passive port Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40319 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: reset gphys on rebootJohn Crispin2014-03-301-0/+19
| | | | | | | | If gphys are not reset upstream uboot can not use them anymore. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40318 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add support for ZyXEL P2812HNUFXJohn Crispin2014-03-304-0/+332
| | | | | | | | | | | This patch adds almost full support for this board. WiFi is still not working. The FXS ports are not functional due to missing support for the TAPI driver on VR9 SoC. Signed-off-by: Antonios Vamporakis <ant@area128.com> Tested-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40317 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add ubifs support in image MakefileJohn Crispin2014-03-301-0/+43
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40316 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add ubifs to FEATURESJohn Crispin2014-03-302-2/+2
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40315 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: xrx200: add ubi support in the kernelJohn Crispin2014-03-301-0/+17
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40314 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add inital support for xrx200 switchJohn Crispin2014-03-301-0/+2023
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40313 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: xrx200: fix duplexJohn Crispin2014-03-301-0/+13
| | | | | | | | | | Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags are reversed. Full duplex is marked as half and the other way around. With this fix the switch will push full GBit speeds. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40312 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fixup 3370 dts fileJohn Crispin2014-03-301-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40311 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix nand/ebu lockingJohn Crispin2014-03-301-0/+21
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40310 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add tffs driverJohn Crispin2014-03-301-0/+110
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40309 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: export gluebi info to sysfsJohn Crispin2014-03-301-0/+88
| | | | | | | | Export the ubi_num and vol_id into the sysfs record of the gluebi- emulated mtd device. Previously userspace didn't have a way to map gluebi-emulated devices back to their corresponding ubi volumes. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40306 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfxJohn Crispin2014-03-301-0/+4
| | | | | | | | | | If the CPU port is not forced up, the link, at least on this board, is lost after changes are applied. This makes sure that the link is restored. Regression tests should confirm it doesn't break other boards. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40305 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: rtl8306: fix max pvid & remove port isolationJohn Crispin2014-03-301-37/+76
| | | | | | | | | | - hide port pvid - vlan index relation - switch initialises with vlans disabled so port isolation is not used - remove special treatment of cpu port Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40304 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: rtl8306: cosmetic changes for swconfigJohn Crispin2014-03-301-21/+26
| | | | | | | | | | | Changes to: - show the correct "enable_vlan" value under "Global attributes" - show tagged ports under "Vlan: ports" - use get_port_link method to report link status Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40303 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: drop old svip foldersJohn Crispin2014-03-278-145/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40294 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.10 to 3.10.34Gabor Juhos2014-03-2745-296/+75
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for TL-WDR4300v1 (IL)Gabor Juhos2014-03-272-1/+6
| | | | | | | | | | | The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40038 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add profile and build firmware image for the Oolite v1 boardGabor Juhos2014-03-272-0/+20
| | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user space support for the Oolite v1 boardGabor Juhos2014-03-274-0/+11
| | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: use correct board name in uci-defaults/02_network] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40033 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the Oolite v1 boardGabor Juhos2014-03-273-0/+143
| | | | | | | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: - use a separate patch for kernel changes, - reorder Kconfig and Makefile entries, - change function and variable names to be lowercase only and fix misaligned tabs in mach-gs-oolite.c, ... ] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40032 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename RB951Ui specific kernel patchGabor Juhos2014-03-271-0/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40031 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.14]: update to 3.14-rc8Imre Kaloz2014-03-2612-26/+30
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40023 3c298f89-4303-0410-b956-a3cf2f4a3e73
* upgrade 3.13 targets to 3.13.7Imre Kaloz2014-03-2614-21/+21
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40022 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86_64: fix sysupgradeFelix Fietkau2014-03-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | Function move_config should be called after or during preinit_mount_root hook in do_mount_root function. At this state sysupgrade.tgz is not in its place during that time when do_mount_root is called. Function move_config is called later so the sysupgrade.tgz stays in root directory to the second restart when it is unpacked properly. This patch adds move_config function to preinit_mount_root hook instead of preinit_main and changes the filename of script to be called before 80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root within preinit_mount_root hook. This issue was introduced for target x86. Since the target for x86_64 is similar to x86, this issue is present also in this target. It solves the ticket #15042 and #14088. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> Tested-By: Stefan Hellermann <stefan@the2masters.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39997 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: fix sysupgradeFelix Fietkau2014-03-211-1/+1
| | | | | | | | | | | | | | | | | | | Function move_config should be called after or during preinit_mount_root hook in do_mount_root function. At this state sysupgrade.tgz is not in its place during that time when do_mount_root is called. Function move_config is called later so the sysupgrade.tgz stays in root directory to the second restart when it is unpacked properly. This patch adds move_config function to preinit_mount_root hook instead of preinit_main and changes the filename of script to be called before 80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root within preinit_mount_root hook. This patch solves ticket #15042 and #14088. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39996 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: init eth0 as lan instead of wan, add a couple boardsZoltan HERPAI2014-03-201-2/+4
| | | | | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: enable /proc/device-tree - used for board detectionZoltan HERPAI2014-03-201-0/+1
| | | | | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: various changesZoltan HERPAI2014-03-204-5/+64
| | | | | | | | | | | | - fix mmc, sata, usb (partially) on CubieTruck - fix hstimer DT on A20 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/generic: fix define in 642-bridge_port_isolate.patchFelix Fietkau2014-03-193-3/+3
| | | | | | | | | | Patch 642-bridge_port_isolate.patch needs to be updated for kernels 3.12, 3.13 and 3.14 as the define for BR_ISOLATE_MODE conflicts with BR_LEARNING Signed-off-by: Jonas Eymann <j.eymann@gmx.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39955 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add missing OF nodeJohn Crispin2014-03-187-9/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39950 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: refresh patchesJohn Crispin2014-03-1879-7410/+14412
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39949 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: switch the am335x-evmsk to the new wlcore bindingsImre Kaloz2014-03-182-27/+13
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39948 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mac80211][omap]: switch to the newer DT bindings for wl1xxxImre Kaloz2014-03-1820-2355/+310
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: fix mmc support on sun4iZoltan HERPAI2014-03-172-70/+10
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/sdk: strip host binaries before packingFelix Fietkau2014-03-131-2/+19
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/sdk: leave out some unnecessary directoriesFelix Fietkau2014-03-131-1/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39914 3c298f89-4303-0410-b956-a3cf2f4a3e73