aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.15 to 5.15.70John Audia2022-10-023-40/+3
| | | | | | | | | | | | | | | | | | Manually rebased: hack-5.15/780-usb-net-MeigLink_modem_support.patch Removed upstreamed: patches-5.15/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1] All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.70&id=89cfddd416bac41ff35f37f928ed3d7fefef908e Signed-off-by: John Audia <therealgraysky@proton.me>
* ath79: fix LibreRouter-v1 watchdog and poe_passSantiago Piccinini2022-10-021-0/+4
| | | | | | Watchdog and poe_passthrough gpios require the jtag disabled. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
* realtek: use correct CAUSEF_DC macro in prom.cSander Vanheule2022-10-011-1/+1
| | | | | | | | The workaround for an already-enabled R4K timer used a non-existent macro CAUSE_DC. Fix compiling by using the actual macro CAUSEF_DC. Fixes: b7aab1958591 ("realtek: SMP handling of R4K timer interrupts") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: SMP handling of R4K timer interruptsMarkus Stockhausen2022-10-011-3/+9
| | | | | | | | | | | | | | | | | | | Until now there has been no good explanation why we mess with the R4K timer on SMP. After extensive testing and looking at the SDK code it becomes clear what it is all about. When we disable the CEVT_R4K module (we will do with the new timer driver) the R4K timer hardware still fires interrupts on the secondary CPU. To get around this we have two options: - Disable IRQ 7 - Stop the counter completely This patch selects option two because this is the root of evil.. To be on the safe side we will do it only in case the CEVT_R4K module is disabled. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
* realtek: fix SMP startupMarkus Stockhausen2022-10-011-2/+1
| | | | | | | | The scope of the SMP startup structure is wrong. It is created on the stack and not as a global variable. This can lead to startup failures. Fixes: 3f41360eb70c ("realtek: use upstream recommendation for CPU start") Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de
* realtek: Convert incorrect v5.10 patchesOlliver Schinagl2022-10-0127-1/+470
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* ath79: Convert incorrect 5.10 and 5.15 patchesOlliver Schinagl2022-10-0133-19/+549
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* generic: Convert incorrect generic/5.10 patchesOlliver Schinagl2022-10-0130-163/+508
| | | | | | | | | | | | | | | | | OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* ramips: add led driver to UniFi FlexHD defaut package setDaniel Golle2022-09-301-1/+1
| | | | | | | Add kmod-leds-ubnt-ledbar to the packages selected by default on the UniFi FlexHD access point. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support t-phy settings from efuse on MT7986Daniel Golle2022-09-303-1/+405
| | | | | | | Import patches from mtk-openwrt-feeds (MTK SDK) to support reading t-phy settings affecting PCIe as well as USB2 and USB3 from efuse. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: add efuse layout to mt7986a.dtsiDaniel Golle2022-09-301-0/+93
| | | | | | | | efuse is used to store board-specific settings of some of the in-SoC peripherals. Add it to device tree, so it gets probed on boot and can be accessed by other drivers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add patch allowing 1-byte wide access to efuseDaniel Golle2022-09-301-0/+46
| | | | | | | Allow byte-wise access to mtk-efuse as some drivers require that. Patch imported from mtk-openwrt-feeds (MTK SDK). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fold lzma debloat patch into the patch adding the codeFelix Fietkau2022-09-304-3374/+96
| | | | | | Reduces the number of hack patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move kernel image cmdline hack to the octeon targetFelix Fietkau2022-09-306-17/+0
| | | | | | It is the only remaining user of this hack Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove hack patch, move kirkwood specific kmods to target modules.mkFelix Fietkau2022-09-303-46/+30
| | | | | | | Tweaking the KCONFIG line of kmod-ata-marvell-sata makes the hack patch unnecessary Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move ubnt ledbar driver to a separate packageFelix Fietkau2022-09-3011-342/+10
| | | | | | | Simplifies the tree by removing a non-upstream kernel patch and related kconfig symbols Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove udp tunnel kconfig selection hackFelix Fietkau2022-09-302-31/+0
| | | | | | | | The corresponding kmod package is marked as HIDDEN and selected by all other kernel modules that need it, so the kconfig side will be in sync without manual selection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: backport clk driver fix for DT nodes namesRafał Miłecki2022-09-294-124/+144
| | | | | | It allows dropping downstream patch renaming DT nodes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: update MAC address configuration for Buffalo WSR-1166DHPKazuhiro Ito2022-09-281-2/+2
| | | | | | | | | | | | Convert MAC address and label_mac configuration of Buffalo WSR-1166DHP to use the generic function of OpenWrt. Apply commit 770cfe9 for WCR-1166DS to WSR-1166DHP too. Tested on the device and MAC address is kept before and after this change. Signed-off-by: Kazuhiro Ito <kzhr@d1.dion.ne.jp>
* kernel: mtk_ppe: use MTK_FOE_STATE_INVALID instead of *_UNBINDDaniel Golle2022-09-288-0/+78
| | | | | | | | | | Instead of dropping *fix-typo-in-__mtk_foe_entry.patch which effectively means keeping the (also wrong) assignment of MTK_FOE_STATE_BIND, rather use MTK_FOE_STATE_INVALID as that works well on both older (NETSYS_V1) and newer (NETSYS_V2) MediaTek SoCs. Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: rtl931x: fix missing CONFIG_COMMON_CLK_REALTEK config flagChristian Marangi2022-09-281-0/+1
| | | | | | | | | When the realtek clock driver was introduced, CONFIG_COMMON_CLK_REALTEK was not correctly disabled for other subtarget. Add the missing config flag to fix compilation error on buildbot. Fixes: 4850bd887c3a ("realtek: add RTL83XX clock driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: rename upstreamed patches and import fixesDaniel Golle2022-09-2716-42/+155
| | | | | | | | | | | | Move and rename patches which were merged upstream and import follow-up fixes for MediaTek Ethernet offloading features on MT7622 and Filogic platforms. Remove patch 793-net-ethernet-mtk_eth_soc-fix-typo-in-__mtk_foe_entry.patch which breaks hardware flow offloading on MT7622, it will be reverted upstream as well. Fixes: c93c5365c0 ("kernel: pick patches for MediaTek Ethernet from linux-next") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-271-1/+1
| | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: fix RTL839x egress tag for ports >= 32Jan Hoffmann2022-09-251-1/+1
| | | | | | | Don't overwrite AS_DPM and L2LEARNING flags when dest_port is >= 32. Fixes: 1773264a0c6d ("realtek: correct egress frame port verification") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* octeon: fix imagebuilder generation by introducing generic targetNick Hainke2022-09-242-5/+5
| | | | | | | | | | | | | The generic imagebuilder does not have a generic in the name, although this is the default naming scheme. Use bcm53xx as template for this fix. Before the fix: openwrt-imagebuilder-octeon.Linux-x86_64.tar.xz After: openwrt-imagebuilder-octeon-generic.Linux-x86_64.tar.xz Signed-off-by: Nick Hainke <vincent@systemli.org>
* x86/config-5.10: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* x86/config-5.15: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdtFlorian Eckert2022-09-241-4/+10
| | | | | | | | | The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-09-245-5/+462
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Sony NCP-HG100/CellularINAGAKI Hiroshi2022-09-248-1/+754
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony NCP-HG100/Cellular is a IoT Gateway with 2.4/5 GHz band 11ac (WiFi-5) wireless function, based on IPQ4019. Specification: - SoC : Qualcomm IPQ4019 - RAM : DDR3 512 MiB (H5TC4G63EFR) - Flash : eMMC 4 GiB (THGBMNG5D1LBAIT) - WLAN : 2.4/5 GHz 2T2R (IPQ4019) - Ethernet : 10/100/1000 Mbps x2 - Transceiver : Qualcomm QCA8072 - WWAN : Telit LN940A9 - Z-Wave : Silicon Labs ZM5101 - Bluetooth : Qualcomm CSR8811 - Audio DAC : Realtek ALC5629 - Audio Amp. : Realtek ALC1304 - Voice Input Processor : Conexant CX20924 - Micro Controller Unit : Nuvoton MINI54FDE - RGB LED, Fan, Temp. sensors - Touch Sensor : Cypress CY8C4014LQI - RGB LED driver : TI LP55231 (2x) - LEDs/Keys : 11x, 6x - UART : through-hole on PCB - J1: 3.3V, TX, RX, GND from tri-angle marking - 115200n8 - Power : 12 VDC, 2.5 A Flash instruction using initramfs image: 1. Prepare TFTP server with the IP address 192.168.132.100 and place the initramfs image to TFTP directory with the name "C0A88401.img" 2. Boot NCP-HG100/Cellular and interrupt after the message "Hit any key to stop autoboot: 2" 3. Perform the following commands and set bootcmd to allow booting from eMMC setenv bootcmd "mmc read 0x84000000 0x2e22 0x4000 && bootm 0x84000000" saveenv 4. Perform the following command to load/boot the OpenWrt initramfs image tftpboot && bootm 5. On the initramfs image, perform sysupgrade with the sysupgrade image (if needed, backup eMMC partitions by dd command and download to other place before performing sysupgrade) 6. Wait for ~120 seconds to complete flashing Known issues: - There are no drivers for audio-related chips/functions in Linux Kernel and OpenWrt, they cannot be used. - There is no driver for MINI54FDE Micro-Controller Unit, customized for this device by the firmware in the MCU. This chip controls the following functions, but they cannot be controlled in OpenWrt. - RGB LED - Fan this fan is controlled automatically by MCU by default, without driver - Thermal Sensors (2x) - Currently, there is no driver or tool for CY8C4014LQI and cannot be controlled. It cannot be exited from "booting mode" and moved to "normal op mode" after booting. And also, the 4x buttons (mic mute, vol down, vol up, alexa trigger) connected to the IC cannot be controlled. - it can be exited from "booting mode" by installing and executing i2cset command: opkg update opkg install i2c-tools i2cset -y 1 0x14 0xf 1 - There is a connection issue on the control by uqmi for the WWAN module. But modemmanager can be used without any issues and the use of it is recommended. - With the F2FS format, too many errors are reported on erasing eMMC partition "rootfs_data" while booting: [ 1.360270] sdhci: Secure Digital Host Controller Interface driver [ 1.363636] sdhci: Copyright(c) Pierre Ossman [ 1.369730] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374729] sdhci_msm 7824900.sdhci: Got CD GPIO ... [ 1.413552] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.528325] mmc0: new HS200 MMC card at address 0001 [ 1.530627] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 1.533530] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 1.542918] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (247:0) [ 1.550323] Alternate GPT is invalid, using primary GPT. [ 1.561669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 ... [ 8.841400] mount_root: loading kmods from internal overlay [ 8.860241] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 8.863746] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.240465] block: attempting to load /etc/config/fstab [ 9.246722] block: unable to load configuration (fstab: Entry not found) [ 9.246863] block: no usable configuration [ 9.254883] mount_root: overlay filesystem in /dev/mmcblk0p17 has not been formatted yet [ 9.438915] urandom_read: 5 callbacks suppressed [ 9.438924] random: mkfs.f2fs: uninitialized urandom read (16 bytes read) [ 12.243332] mmc_erase: erase error -110, status 0x800 [ 12.246638] mmc0: cache flush error -110 [ 15.134585] mmc_erase: erase error -110, status 0x800 [ 15.135891] mmc_erase: group start error -110, status 0x0 [ 15.139850] mmc_erase: group start error -110, status 0x0 ...(too many the same errors)... [ 17.350811] mmc_erase: group start error -110, status 0x0 [ 17.356197] mmc_erase: group start error -110, status 0x0 [ 17.439498] sdhci_msm 7824900.sdhci: Card stuck in wrong state! card_busy_detect status: 0xe00 [ 17.446910] mmc0: tuning execution failed: -5 [ 17.447111] mmc0: cache flush error -110 [ 18.012440] F2FS-fs (mmcblk0p17): Found nat_bits in checkpoint [ 18.062652] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 428fa16b [ 18.198691] block: attempting to load /etc/config/fstab [ 18.198972] block: unable to load configuration (fstab: Entry not found) [ 18.203029] block: no usable configuration [ 18.211371] mount_root: overlay filesystem has not been fully initialized yet [ 18.214487] mount_root: switching to f2fs overlay So, this support uses ext4 format instead which has no errors. Note: - The primary uart is shared for debug console and Z-Wave chip. The function is switched by GPIO15 (Linux: 427). value: 1: debug console 0: Z-Wave - NCP-HG100/Cellular has 2x os-image pairs in eMMC. - 0:HLOS, rootfs - 0:HLOS_1, rootfs_1 In OpenWrt, the first image pair is used. - "bootipq" command in U-Boot requires authentication with signed-image by default. To boot unsigned image of OpenWrt, use "mmc read" and "bootm" command instead. - This support is for "Cellular" variant of NCP-HG100 and not tested on "WLAN" (non-cellular) variant. - The board files of ipq-wifi may also be used in "WLAN" variant of NCP-HG100, but unconfirmed and add files as for "Cellular" variant. - "NET" LED is used to indicate WWAN status in stock firmware. - There is no MAC address information in the label on the case, use the address included in UUID in the label as "label-MAC" instead. - The "CLOUD" LEDs are partially used for indication of system status in stock firmware, use they as status LEDs in OpenWrt instead of RGB LED connected to the MCU. MAC addresses: LAN : 5C:FF:35:**:**:ED (ART, 0x6 (hex)) WAN : 5C:FF:35:**:**:EF (ART, 0x0 (hex)) 2.4 GHz: 5C:FF:35:**:**:ED (ART, 0x1006 (hex)) 5 GHz : 5C:FF:35:**:**:EE (ART, 0x5006 (hex)) partition layout in eMMC (by fdisk, GPT): Disk /dev/mmcblk0: 7733248 sectors, 3776M Logical sector size: 512 Disk identifier (GUID): **** Partition table holds up to 20 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Name 1 34 1057 512K 0:SBL1 2 1058 2081 512K 0:BOOTCONFIG 3 2082 3105 512K 0:QSEE 4 3106 4129 512K 0:QSEE_1 5 4130 4641 256K 0:CDT 6 4642 5153 256K 0:CDT_1 7 5154 6177 512K 0:BOOTCONFIG1 8 6178 6689 256K 0:APPSBLENV 9 6690 8737 1024K 0:APPSBL 10 8738 10785 1024K 0:APPSBL_1 11 10786 11297 256K 0:ART 12 11298 11809 256K 0:HSEE 13 11810 28193 8192K 0:HLOS 14 28194 44577 8192K 0:HLOS_1 15 44578 306721 128M rootfs 16 306722 568865 128M rootfs_1 17 568866 3958065 1654M rootfs_data [initial work] Signed-off-by: Iwao Yuki <dev.clef@gmail.com> Co-developed-by: Iwao Yuki <dev.clef@gmail.com> [adjustments, cleanups, commit message, sending patch] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (dropped clk_unused_ignore, dropped 901-* patches, renamed key nodes, changed LEDs chan/labels to match func-en, made :net -> (w)wan leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: base-files: properly close caseTomasz Maciej Nowak2022-09-241-0/+1
| | | | | | | | Fix this occurrence during boot: /bin/board_detect: line 10: Unsupported: not found Fixes: 80baffd2aa91 (" ipq40xx: add support for Pakedge WR-1") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ipq40xx: luma_wrtq-329acn: differentiate ethernet mac addressesTomasz Maciej Nowak2022-09-241-0/+12
| | | | | | | | On OEM firmware both addresses for In and Out ports are different. Set them as such also in OpenWrt. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* apm821xx: make 5.15 kernel defaultChristian Lamparter2022-09-241-2/+1
| | | | | | 5.15 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: refresh 5.15 configChristian Lamparter2022-09-241-2/+2
| | | | | | | | | | | use the toolchain's default CPU (464fp) as the CPU option. This fixes a CPU selection prompt which shows up now. CPU selection > 1. Generic 32 bits powerpc (POWERPC_CPU) (NEW) 2. Rely on the toolchain's implicit default CPU (TOOLCHAIN_DEFAULT_CPU) (NEW) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix RUTX10 Wi-Fi woesKasparas Elzbutas2022-09-242-30/+8
| | | | | | | | | | | | | This partially reverts: commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") U-Boot on these devices mangles the device tree, so nvmem-cell type calibration doesn't work. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Kasparas Elzbutas <elzkas@gmail.com> (added reference to commit, rewrote commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: add Kernel 5.15 support via testingChristian Lamparter2022-09-247-1/+597
| | | | | | Add the latest default Kernel for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: fix 5.10 buildChristian Lamparter2022-09-241-0/+32
| | | | | | | | | | | | | the 5.10 uml build currently breaks with: /usr/bin/ld: arch/um/os-Linux/signal.o: in function `sigusr1_handler': arch/um/os-Linux/signal.c:141: undefined reference to `uml_pm_wake' But there's an upstream fix for this. Backport the fix for now but also let upstream know so it finds its way through the -stable releases. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Move some IOMMU options to genericHauke Mehrtens2022-09-2412-16/+10
| | | | | | | | | | | | This adds some missing IOMMU related options for x86/64 and moves some of them to generic for all targets. On x86 IOMMU_DEFAULT_DMA_LAZY is used by default, on all other platforms IOMMU_DEFAULT_DMA_STRICT is the default. we just follow the default kernel configuration here. Fixes: 8fea4a102ccd ("x86/64: enable IOMMU support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: switch to 5.15 as default kernelNick Hainke2022-09-241-2/+1
| | | | | | | | | | | | | | | | | | | The 5.15 kernel has new interesting features like MGLRU. Most of the targets already have added support for testing kernel 5.15 since April 2022. Set 5.15 as default for all subtargets. Testing support was added here: - ae6bfb7d67c1 ("ath79: tiny: add 5.15 support for tiny subtarget") - 9a0155bc4fa3 ("ath79: add 5.15 support for generic subtarget") - 5af9aafabbc0 ("ath79: mikrotik: add 5.15 support for mikrotik subtarget") - f3fa68e5153b ("ath79: nand: add 5.15 support for nand subtarget") Tested on: - Nanostation M5 XM (tiny) - TP-Link EAP-225 Outdoor (generic) - TP-Link CPE210 (generic) Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix mac-address-increment on driver probe deferWill Moss2022-09-232-0/+62
| | | | | | | | Fixes situations where MAC address gets incremented multiple times if device initialization fails at first and then is deferred. Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Will Moss <willormos@gmail.com>
* generic: 5.15: add missing PAGE_POOL_STATS configChristian Marangi2022-09-231-0/+1
| | | | | | Add new PAGE_POOL_STATS config backported for the mtk offload patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: pick patches for MediaTek Ethernet from linux-nextDaniel Golle2022-09-2240-19/+5839
| | | | | | | | | | | | | | | | | | | Pick patches with several fixes and improvements, preparation for upcoming WED (TX) [1] as well as basic XDP support [2] with MediaTek's Filogic SoCs to the mtk_eth_soc driver. Also pick follow-up patch fixing Ethernet on MT7621 [3]. Tested on Bananapi BPi-R3 (MT7986), Bananapi BPi-R64 (MT7622), Bananapi BPi-R2 (MT7623), MikroTik RouterBoard M11G (MT7621). [1]: https://patchwork.kernel.org/project/netdevbpf/list/?series=662108&state=* [2]: https://patchwork.kernel.org/project/netdevbpf/list/?series=675368&state=* (the first part of the series adding wed nodes to mt7986a.dtsi was applied to the copy of mt7986a.dtsi in our tree) [3]: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=5e69163d3b9931098922b3fc2f8e786af8c1f37e Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: disable wireless extensions only when neededFelix Fietkau2022-09-222-10/+10
| | | | | | They are only needed by a few very old drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.15 to 5.15.69John Audia2022-09-228-172/+172
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.144John Audia2022-09-221-5/+5
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: Reorder kernel configurationHauke Mehrtens2022-09-221-3/+2
| | | | | | | | This was done by running this: ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate CONFIG_DEFAULT_FQ_PIE by defaultHauke Mehrtens2022-09-222-0/+2
| | | | | | | | When building OpenWrt with CONFIG_ALL_KMODS the kernel build will ask for CONFIG_DEFAULT_FQ_PIE option. This deactivates it by default. Fixes: c3e4a0d99b97 ("kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIE") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86/64: enable IOMMU supportNicola Corna2022-09-212-0/+38
| | | | | | | | | | | Enable IOMMU support for Intel and AMD x86 platforms. With this, when the vfio module is present, physical PCI devices can be passed to VMs, for example with `qemu-system-x86_64 -device vfio-pci,host=05:00.0 ...`. IOMMU support increases the kernel size by a small amount (~370KB, from 5239840 B to 5611200 B, a ~7% increase in size). Signed-off-by: Nicola Corna <nicola@corna.info>
* bcm4908: fix -EPROBE_DEFER support in bcm4908_enetRafał Miłecki2022-09-212-1/+58
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update U-Boot NVMEM driverRafał Miłecki2022-09-206-0/+118
| | | | | | | 1. Fix casting 2. Support DT-defined variables Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 20:42:20 +0000