aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* mxs: switch to Kernel 5.10Paul Spooren2021-11-141-2/+2
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* lantiq: fix mac address from nvmem-cellsMathias Kresin2021-11-142-2/+0
| | | | | | | | | | The devicetree property mac-address is expected to be set by the bootloader and has priority over the nvmem supplied one. Drop the mac-address address property from the dtsi files, to let the mac address from nvmem-cells get used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: fix missing includeChristian Lamparter2021-11-141-0/+1
| | | | | | | | | | | | This patch fixes a blunder of mine. The include needed for LED_COLOR_ID_BLUE property is missing. This caused the builds to fail with: |Error: arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi:91.13-14 syntax error |FATAL ERROR: Unable to parse input tree Fixes: 12d33d388c52 ("ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: reenable Zyxel NBG6617 by defaultChristian Lamparter2021-11-141-1/+0
| | | | | | | | | The Zyxel NBG6617 already uses lzma to compress the kernel. A local build with every module enabled (either as =Y or =M) ended produced a 3058 KiB kernel (the kernel partition is 4MiB). It booted just fine, let's reenable the device. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)Richard Yu2021-11-148-1/+415
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P&W R619AC is a IPQ4019 Dual-Band AC1200 router. It is made by P&W (p2w-tech.com) known as P&W R619AC but marketed and sold more popularly as G-DOCK 2.0. Specification: * SOC: Qualcomm Atheros IPQ4019 (717 MHz) * RAM: 512 MiB * Flash: 16 MiB (NOR) + 128 MiB (NAND) * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) * Wireless: - 2.4 GHz b/g/n Qualcomm Atheros IPQ4019 - 5 GHz a/n/ac Qualcomm Atheros IPQ4019 * USB: 1 x USB 3.0 * LED: 4 x LAN, 1 x WAN, 2 x WiFi, 1 x Power (All Blue LED) * Input: 1 x reset * 1 x MicroSD card slot * Serial console: 115200bps, pinheader J2 on PCB * Power: DC 12V 2A * 1 x Unpopulated mPCIe Slot (see below how to connect it) * 1 x Unpopulated Sim Card Slot Installation: 1. Access to tty console via UART serial 2. Enter failsafe mode and mount rootfs <https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset> 3. Edit inittab to enable shell on tty console `sed -i 's/#ttyM/ttyM/' /etc/inittab` 4. Reboot and upload `-nand-factory.bin` to the router (using wget) 5. Use `sysupgrade` command to install Another installation method is to hijack the upgrade server domain of stock firmware, because it's using insecure http. This commit is based on @LGA1150(at GitHub)'s work <https://github.com/LGA1150/openwrt/commit/a4932c8d5a275d1fb4297bd20ec03f9270a45d1c> With some changes: 1. Added `qpic_bam` node in dts. I don't know much about this, but I observed other dtses have this node. 2. Removed `ldo` node under `sd_0_pinmux`, because `ldo` cause SD card not working. This fix is from <https://github.com/coolsnowwolf/lede/commit/51143b4c7571f717afe071db60bbb4db1532cbf2> 3. Removed the 32MB NOR variant. 4. Removed `cd-gpios` in `sdhci` node, because it's reported that it makes wlan2g led light up. 5. Added ethphy led config in dts. 6. Changed nand partition label from `rootfs` to `ubi`. About the 128MiB variant: The stock bootloader sets size of nand to 64MiB. But most of this devices have 128MiB nand. If you want to use all 128MiB, you need to modify the `MIBIB` data of bootloader. More details can be found on github: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-818770060> For instructions on how to flash the MIBIB partition from u-boot console: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-819138232> About the Mini PCIe slot: (from "ygleg") "The REFCLK signals on the Mini PCIe slot is not connected on this board out of the box. If you want to use the Mini PCIe slot on the board, you need to (preferably) solder two 0402 resistors: R436 (REFCLK+) and R444 (REFCLK-)..." This and much more information is provoided in the github comment: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-968054670> Signed-off-by: Richard Yu <yurichard3839@gmail.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> [Added comment about MIBIB+128 MiB variant. Added commit message section about pcie slot. Renamed gpio-leds' subnodes and added color, function+enum properties.] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.79Rui Salvaterra2021-11-132-5/+5
| | | | | | | | | Manually rebased: generic/backport-5.10/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch Tested-by: John Audia <graysky@archlinux.us> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7622: bpi-r64: rewrite MMC uImage.FIT sysupgradeDaniel Golle2021-11-122-17/+14
| | | | | | | | | | Similar to mt7623, also no longer use 'blockdev' and stop relying on in-kernel partition parsers. Instead, strip off all metadata using 'fwtool' while writing the firmware image and scrape the number of blocks written from 'dd', then use that block offset to stash the configuration backup. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: re-write sysupgrade uImage.FIT on MMCDaniel Golle2021-11-122-16/+13
| | | | | | | | | | | | | | Re-reading the partition table doesn't work reliably, it fails if anything on the device is still in use and it's not trivial to prevent every possible case of a block device still being in use somehow. Therefore, instead of relying on the in-kernel partition parser to know where to write the configuration backup, use OpenWrt's format-agnostic fwtool to strip off all metadata from the image and count its blocks while writing. In that way we can know where to write the config backup without needing the kernel to parse the MBR and FIT structures. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: switch to kernel 5.10Rafał Miłecki2021-11-091-2/+1
| | | | | | | | Tested on: 1. Asus GT-AC5300 2. Netgear R8000P Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add watchdog supportRafał Miłecki2021-11-096-0/+154
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: refresh kernel configsRafał Miłecki2021-11-092-16/+8
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fix b53 regression regarding RGMII reg(s)Rafał Miłecki2021-11-083-2/+48
| | | | | | | This fixes: [ 35.308550] WARNING: CPU: 0 PID: 230 at bcm_sf2_reg_rgmii_cntrl.isra.0+0x84/0x90 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: drop patch for downstream swconfig-based b53Rafał Miłecki2021-11-081-53/+0
| | | | | | | It isn't used anymore so there is no need to hack CPU port. Upstream (DSA-based) b53 also supports all switch ports just fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: drop downstream patch for Buffalo WZR-1750DHP buttonRafał Miłecki2021-11-081-20/+0
| | | | | | | | | This patch never received a proper description and was never sent upstream as supposed. It was meant to be handled in 2015-2018 so it should be safe to assume noone really understands it or care. Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* layerscape: mkits-multiple-config: fail on invalid argumentsRafał Miłecki2021-11-081-0/+5
| | | | | | | | Fail if arguments couldn't be parsed and print unrecognized part. It's important when running it from script with dynamic values. Missing value could result in skipping argument and silent failures (unexpected its). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: start work on images for devices using U-BootRafał Miłecki2021-11-082-0/+36
| | | | | | | | | | | | | | | | | | | | New BCM4908 family based routers will use U-Boot bootloader. That will require using a totally different firmware format. Kernel has to be put in a FIT image. OpenWrt has some helpers for generating .its files but they don't fit BCM4908 requirements and there is no simple way of extending any of them. The best solution seems to be storing an .its template. BCM4908 bootfs may: 1. contain extra binaries (other than kernel & DTB) 2. include multiple DTB files 3. store device specific U-Boot configurations with custom properties Such setups are too complex to generate using shell script. Raw .its file on the other hand seems quire clean & reasonable. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: switch to kernel 5.10Rafał Miłecki2021-11-081-2/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: fix bgmac regression present in 5.10 kernelRafał Miłecki2021-11-081-0/+42
| | | | | | | | | This fixes: [ 2.548098] bgmac_bcma bcma0:1: Failed to register fixed PHY device [ 2.554584] bgmac_bcma bcma0:1: Cannot connect to phy and downstream (swconfig-based) b53 driver failing to load. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: relocate LZMA loaderRafał Miłecki2021-11-081-2/+2
| | | | | | | | | | | | | | | | Kernel 5.10 grew bigger than 5.4 so we need to bump BZ_TEXT_START to allow lzma loader hanel its size. At the same time BZ_STACK_START needs to be increased to avoid overwriting the stack. For a reference see: d5cf4a5aa4a3 ("brcm47xx: relocate loader to higher address") 2909a4b78e2b ("brcm47xx: relocate the stack in loader") Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.78John Audia2021-11-077-10/+10
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.158John Audia2021-11-0717-46/+46
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* pistachio: drop Kernel 5.4 supportPaul Spooren2021-11-0714-1239/+0
| | | | | | With the switch to Kernel 5.10 the 5.4 files are no longer needed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* pistachio: switch to Kernel 5.10Paul Spooren2021-11-071-3/+2
| | | | | | | This was successfully boot tested on a Creator Ci40. Signed-off-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* archs38: update kernel version to 5.10Evgeniy Didin2021-11-073-3/+289
| | | | | | | | | | | | | Update config, Makefile and image/Makefile. Directly switch to kernel 5.10. This patch was tested in nSIM simulator, no errors appeared. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Paul Spooren <mail@aparcar.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* kernel: add missing UBSAN config symbolsStijn Tintel2021-11-072-0/+3
| | | | | | | | | | | | | | Enabling KERNEL_UBSAN exposes several missing symbols. Add new kernel build options for UBSAN_BOUNDS and UBSAN_TRAP, disable CONFIG_TEST_UBSAN in the generic kernel configs and enable CONFIG_UBSAN_MISC in generic 5.10 config. The latter symbol was removed in later kernels, as it was causing some issues, so just disable it in 5.10 instead of adding a build option for it. Fixes build failures with KERNEL_UBSAN enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing KASAN config symbolsStijn Tintel2021-11-071-0/+1
| | | | | | | | | | | | | | Enabling KERNEL_KASAN exposes several missing symbols. As KASAN_SW_TAGS is only implemented for arm64 CPUs and requires clang, it doesn't make sense to make this a build option so just default to KASAN_GENERIC and disable KASAN_SW_TAGS. While at it, disable TEST_KASAN_MODULE in the generic 5.10 config. Fixes build failures with KERNEL_KASAN enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: compress 7xx patch numberingMatthew Hagan2021-11-0793-0/+0
| | | | | | | | | The qca8k patch series brings the numbering to 799. This patch renames 7xx patches to create space for more backports to be added. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> [rename 729->719] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: use zImage for Cell-C RTL30VWPawel Dembicki2021-11-061-4/+3
| | | | | | | | | | After switch to 5.10 kernel, kernel size was too high. This patch switches Cell-C RTL30VW from uImage to zImage build. Lzma uImage wrap is required for factory booting and it must left untouched. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: add broken-flash-reset for HLK-7621A EvBWout Bertrums2021-11-061-0/+1
| | | | | | | | | | This is needed because the HLK-7621 EvB has 32MB of flash, so it will have to use 4B addressing and the broken-flash-reset hack has to be used to be able to reboot. Signed-off-by: Wout Bertrums <wout@wbnet.eu> [copied github message into commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: 5.10: refresh configRobert Marko2021-11-061-0/+1
| | | | | | | | It looks like CONFIG_BLK_CMDLINE_PARSER was forgotten during the Orbi device merge. So lets refresh the config with it. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* x86: sort alphabetically default packagesAlberto Bursi2021-11-061-3/+4
| | | | | | | | | sorting alphabetically default packages and placing them on their own line. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [fixed whitespaces before tab, double whitespaces] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: enable kmod-tg3 on 64-bit by defaultAlberto Bursi2021-11-061-1/+2
| | | | | | | | | | | | | Gigabit ethernet adapters using BCM5719/5720 chipset are common on servers and as easy/cheap to get as Intel based ones. Usually found in 2-port and 4-port cards. Also some devices recently added to x86_64 target like the Meraki MX100 use this chipset for 8 of their 12 integrated ports. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ramips: mt7621-dts: properly organize pcie nodeSergio Paracuellos2021-11-061-10/+8
| | | | | | | | | | | Device tree pcie node for this SoC is using different styles in its different properties. Hence properly unify them to be able to write a a proper yaml schema documentation. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210505121736.6459-11-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: add missing device_type in pcie root portsSergio Paracuellos2021-11-061-0/+3
| | | | | | | | | According to the YAML schema 'pci-bus.yaml' the 'device_type' property is mandatory for all pcie root ports. Hence add it. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210506170742.28196-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: remove 'bug-range' propertySergio Paracuellos2021-11-061-4/+0
| | | | | | | | | Property 'bus-range' when values are the default are not necessary to be defined. Hence, remove all of them. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210506170742.28196-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: use standard 'syscon' stringSergio Paracuellos2021-11-061-4/+4
| | | | | | | | | | Both 'memc' and 'sysc' nodes are not using 'syscon' as a node string which is the standard one to be used. Update both of them. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210505132154.8263-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: remove ethsys nodeSergio Paracuellos2021-11-061-8/+1
| | | | | | | | | | | | | | | | DT 'ethsys' node is being configured as a syscon to get access to reset and other registers in the 'mediateķ,mt7621-eth' driver. Since the 'sysc' is also a syscon, provides the clock and also is virtually mapped from the same physical address 0x1e000000 we can just use 'sysc' as the phandle for the syscon in the ethernet node. Compatible string 'mediatek,mt7621-ethsys' of the node is not being used anywhere inside the kernel so, this node can be safely removed. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210505132154.8263-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: remove obsolete switch nodeDENG Qingfang2021-11-061-7/+0
| | | | | | | | | | This was for OpenWrt's swconfig driver, which never made it upstream, and was also superseded by MT7530 DSA driver. Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> Link: https://lore.kernel.org/r/20210108025155.31556-1-dqfext@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: properly define 'cpc' and 'mc' nodesSergio Paracuellos2021-11-061-10/+10
| | | | | | | | | | | | | | | | 'cpc' and 'mc' nodes correspond with the MIPS 'Cluster Power Controller' and 'MIPS Common Device Memory Map' which are present in some MIPS related boards. There is already bindings documentation for these two located in: - Documentation/devicetree/bindings/power/mti,mips-cpc.yaml - Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml Hence, properly update compatible strings and align nodes with already mainlined bindings documentation. Also, move their definition to a proper place since both of them are not related with the palmbus at all. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211002060706.30511-1-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: change some node hex addresses to lower caseSergio Paracuellos2021-11-061-6/+6
| | | | | | | | | Hexadecimal addresses in device tree must be defined using lower case. There are some of them that are still in upper case. Change them all. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211017070656.12654-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ramips: mt7621-dts: make use of 'IRQ_TYPE_LEVEL_HIGH' instead of magic numbersSergio Paracuellos2021-11-061-2/+2
| | | | | | | | | | Nodes 'gdma' and 'hsdma' are using magic number '4' in interrupts property. Use 'IRQ_TYPE_LEVEL_HIGH' instead to align with the rest of the nodes in the file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211019102915.15409-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath79: WNDR3700/3800/MAC: utilize nvmem for caldata fetchingChristian Lamparter2021-11-068-40/+74
| | | | | | | | converts the still popular WNDR3700 Series to fetch the caldata through nvmem. As the "MAC with NVMEM" has shown, there could pitfalls along the way. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.4 to 5.4.156John Audia2021-11-064-64/+4
| | | | | | | | | Removed upstreamed: backport-5.4/790-v5.7-net-switchdev-do-not-propagate-bridge-updates-across.patch All other patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.77Rui Salvaterra2021-11-0631-295/+189
| | | | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/081-v5.15-Revert-pinctrl-bcm-ns-support-updated-DT-binding-as-.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=01c2881bb0e0a71b87ca425e1b763ac13855aa7e Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm4908: fix calculation of new cferam indexSungbo Eo2021-11-041-2/+2
| | | | | | | | | | | | | The arithmetic expansion fails when idx becomes a two digit number. Fix this by relying on expr command. root@OpenWrt:/# echo $(((028 + 0) % 1000)) /bin/ash: arithmetic syntax error root@OpenWrt:/# echo $(($(expr 028 + 0) % 1000)) 28 Fixes: a6a0b252baa6 ("bcm4908: add sysupgrade support") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* bcm53xx: add first 5.17 DTS changesRafał Miłecki2021-11-045-7/+177
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq40xx: disable some devices due to kernel sizeRobert Marko2021-11-031-0/+9
| | | | | | | | | | Disable some of the ipq40xx devices due to their kernel size limitations. These devices fail to build with kernel 5.10 and full buildbot config. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [keep gl-b1300/gl-s1300 enabled, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: switch to kernel 5.10Adrian Schmutzler2021-11-031-1/+1
| | | | | | | | | | There have been enough tests and new developments require the new kernel, so let's update it. There is a bunch of devices that do not build anymore due to kernel size limitations. These are disabled in a subsequent commit. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* imx: remove obsolete Kernel 5.4Piotr Dymacz2021-11-0316-3122/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx: update subtargets default kernel configs for 5.10Piotr Dymacz2021-11-032-2/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 22:49:42 +0000